| Message ID | 20190725135044.24381-2-vincenzo.frascino@arm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v6,1/2] arm64: Define Documentation/arm64/tagged-address-abi.rst | expand |
Some more comments. Mostly minor wording issues, except the prctl() exclusion at the end. On 25/07/2019 14:50, Vincenzo Frascino wrote: > On arm64 the TCR_EL1.TBI0 bit has been always enabled hence > the userspace (EL0) is allowed to set a non-zero value in the > top byte but the resulting pointers are not allowed at the > user-kernel syscall ABI boundary. > > With the relaxed ABI proposed through this document, it is now possible > to pass tagged pointers to the syscalls, when these pointers are in > memory ranges obtained by an anonymous (MAP_ANONYMOUS) mmap(). > > This change in the ABI requires a mechanism to requires the userspace > to opt-in to such an option. > > Specify and document the way in which sysctl and prctl() can be used > in combination to allow the userspace to opt-in this feature. > > Cc: Catalin Marinas <catalin.marinas@arm.com> > Cc: Will Deacon <will.deacon@arm.com> > CC: Andrey Konovalov <andreyknvl@google.com> > Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> > Acked-by: Szabolcs Nagy <szabolcs.nagy@arm.com> > --- > Documentation/arm64/tagged-address-abi.rst | 148 +++++++++++++++++++++ > 1 file changed, 148 insertions(+) > create mode 100644 Documentation/arm64/tagged-address-abi.rst > > diff --git a/Documentation/arm64/tagged-address-abi.rst b/Documentation/arm64/tagged-address-abi.rst > new file mode 100644 > index 000000000000..a8ecb991de82 > --- /dev/null > +++ b/Documentation/arm64/tagged-address-abi.rst > @@ -0,0 +1,148 @@ > +======================== > +ARM64 TAGGED ADDRESS ABI > +======================== > + > +Author: Vincenzo Frascino <vincenzo.frascino@arm.com> > + > +Date: 25 July 2019 > + > +This document describes the usage and semantics of the Tagged Address > +ABI on arm64. > + > +1. Introduction > +--------------- > + > +On arm64 the TCR_EL1.TBI0 bit has always been enabled on the kernel, hence > +the userspace (EL0) is entitled to perform a user memory access through a > +64-bit pointer with a non-zero top byte but the resulting pointers are not > +allowed at the user-kernel syscall ABI boundary. > + > +This document describes a relaxation of the ABI that makes it possible to > +to pass tagged pointers to the syscalls, when these pointers are in memory One too many "to" (at the end the previous line). > +ranges obtained as described in section 2. > + > +Since it is not desirable to relax the ABI to allow tagged user addresses > +into the kernel indiscriminately, arm64 provides a new sysctl interface > +(/proc/sys/abi/tagged_addr) that is used to prevent the applications from > +enabling the relaxed ABI and a new prctl() interface that can be used to > +enable or disable the relaxed ABI. > +A detailed description of the newly introduced mechanisms will be provided > +in section 2. > + > +2. ARM64 Tagged Address ABI > +--------------------------- > + > +From the kernel syscall interface perspective, we define, for the purposes > +of this document, a "valid tagged pointer" as a pointer that either has a > +zero value set in the top byte or has a non-zero value, is in memory ranges > +privately owned by a userspace process and is obtained in one of the > +following ways: > +- mmap() done by the process itself, where either: > + > + - flags have **MAP_PRIVATE** and **MAP_ANONYMOUS** > + - flags have **MAP_PRIVATE** and the file descriptor refers to a regular > + file or **/dev/zero** > + > +- brk() system call done by the process itself (i.e. the heap area between > + the initial location of the program break at process creation and its > + current location). > +- any memory mapped by the kernel in the process's address space during > + creation and with the same restrictions as for mmap() (e.g. data, bss, > + stack). > + > +The ARM64 Tagged Address ABI is an opt-in feature, and an application can > +control it using the following: > + > +- **/proc/sys/abi/tagged_addr**: a new sysctl interface that can be used to > + prevent the applications from enabling the access to the relaxed ABI. > + The sysctl supports the following configuration options: > + > + - **0**: Disable the access to the ARM64 Tagged Address ABI for all > + the applications. > + - **1** (Default): Enable the access to the ARM64 Tagged Address ABI for > + all the applications. > + > + If the access to the ARM64 Tagged Address ABI is disabled at a certain > + point in time, all the applications that were using tagging before this > + event occurs, will continue to use tagging. "tagging" may be misinterpreted here. I would be more explicit by saying that the tagged address ABI remains enabled in processes that opted in before the access got disabled. > +- **prctl()s**: > + > + - **PR_SET_TAGGED_ADDR_CTRL**: Invoked by a process, can be used to enable or > + disable its access to the ARM64 Tagged Address ABI. I still find the wording confusing, because "access to the ABI" is not used consistently. The "tagged_addr" sysctl enables *access to the ABI*, that's fine. However, PR_SET_TAGGED_ADDR_CTRL enables *the ABI itself* (which is only possible if access to the ABI is enabled). > + > + The (unsigned int) arg2 argument is a bit mask describing the control mode > + used: > + > + - **PR_TAGGED_ADDR_ENABLE**: Enable ARM64 Tagged Address ABI. > + > + The prctl(PR_SET_TAGGED_ADDR_CTRL, ...) will return -EINVAL if the ARM64 > + Tagged Address ABI is not available. For clarity, it would be good to mention that one possible reason for the ABI not to be available is tagged_addr == 0. > + > + The arguments arg3, arg4, and arg5 are ignored. > + - **PR_GET_TAGGED_ADDR_CTRL**: can be used to check the status of the Tagged > + Address ABI. > + > + The arguments arg2, arg3, arg4, and arg5 are ignored. > + > +The ABI properties set by the mechanisms described above are inherited by threads > +of the same application and fork()'ed children but cleared by execve(). > + > +When a process has successfully opted into the new ABI by invoking > +PR_SET_TAGGED_ADDR_CTRL prctl(), this guarantees the following behaviours: > + > + - Every currently available syscall, except the cases mentioned in section 3, can > + accept any valid tagged pointer. The same rule is applicable to any syscall > + introduced in the future. I thought Catalin wanted to drop this guarantee? > + - If a non valid tagged pointer is passed to a syscall then the behaviour > + is undefined. > + - Every valid tagged pointer is expected to work as an untagged one. > + - The kernel preserves any valid tagged pointer and returns it to the > + userspace unchanged (i.e. on syscall return) in all the cases except the > + ones documented in the "Preserving tags" section of tagged-pointers.txt. > + > +A definition of the meaning of tagged pointers on arm64 can be found in: > +Documentation/arm64/tagged-pointers.txt. > + > +3. ARM64 Tagged Address ABI Exceptions > +-------------------------------------- > + > +The behaviours described in section 2, with particular reference to the > +acceptance by the syscalls of any valid tagged pointer are not applicable > +to the following cases: > + > + - mmap() addr parameter. > + - mremap() new_address parameter. > + - prctl(PR_SET_MM, PR_SET_MM_MAP, ...) struct prctl_mm_map fields. > + - prctl(PR_SET_MM, PR_SET_MM_MAP_SIZE, ...) struct prctl_mm_map fields. All the PR_SET_MM options that specify pointers (PR_SET_MM_START_CODE, PR_SET_MM_END_CODE, ...) should be excluded as well. AFAICT (but don't take my word for it), that's all of them except PR_SET_MM_EXE_FILE. Conversely, PR_SET_MM_MAP_SIZE should not be excluded (it does not pass a prctl_mm_map struct, and the pointer to unsigned int can be tagged). Kevin > + > +Any attempt to use non-zero tagged pointers will lead to undefined behaviour. > + > +4. Example of correct usage > +--------------------------- > +.. code-block:: c > + > + void main(void) > + { > + static int tbi_enabled = 0; > + unsigned long tag = 0; > + > + char *ptr = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE, > + MAP_ANONYMOUS, -1, 0); > + > + if (prctl(PR_SET_TAGGED_ADDR_CTRL, PR_TAGGED_ADDR_ENABLE, > + 0, 0, 0) == 0) > + tbi_enabled = 1; > + > + if (ptr == (void *)-1) /* MAP_FAILED */ > + return -1; > + > + if (tbi_enabled) > + tag = rand() & 0xff; > + > + ptr = (char *)((unsigned long)ptr | (tag << TAG_SHIFT)); > + > + *ptr = 'a'; > + > + ... > + } > +
Hi Kevin, On 7/30/19 11:32 AM, Kevin Brodsky wrote: > Some more comments. Mostly minor wording issues, except the prctl() exclusion at > the end. > > On 25/07/2019 14:50, Vincenzo Frascino wrote: >> On arm64 the TCR_EL1.TBI0 bit has been always enabled hence >> the userspace (EL0) is allowed to set a non-zero value in the >> top byte but the resulting pointers are not allowed at the >> user-kernel syscall ABI boundary. >> >> With the relaxed ABI proposed through this document, it is now possible >> to pass tagged pointers to the syscalls, when these pointers are in >> memory ranges obtained by an anonymous (MAP_ANONYMOUS) mmap(). >> >> This change in the ABI requires a mechanism to requires the userspace >> to opt-in to such an option. >> >> Specify and document the way in which sysctl and prctl() can be used >> in combination to allow the userspace to opt-in this feature. >> >> Cc: Catalin Marinas <catalin.marinas@arm.com> >> Cc: Will Deacon <will.deacon@arm.com> >> CC: Andrey Konovalov <andreyknvl@google.com> >> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> >> Acked-by: Szabolcs Nagy <szabolcs.nagy@arm.com> >> --- >> Documentation/arm64/tagged-address-abi.rst | 148 +++++++++++++++++++++ >> 1 file changed, 148 insertions(+) >> create mode 100644 Documentation/arm64/tagged-address-abi.rst >> >> diff --git a/Documentation/arm64/tagged-address-abi.rst >> b/Documentation/arm64/tagged-address-abi.rst >> new file mode 100644 >> index 000000000000..a8ecb991de82 >> --- /dev/null >> +++ b/Documentation/arm64/tagged-address-abi.rst >> @@ -0,0 +1,148 @@ >> +======================== >> +ARM64 TAGGED ADDRESS ABI >> +======================== >> + >> +Author: Vincenzo Frascino <vincenzo.frascino@arm.com> >> + >> +Date: 25 July 2019 >> + >> +This document describes the usage and semantics of the Tagged Address >> +ABI on arm64. >> + >> +1. Introduction >> +--------------- >> + >> +On arm64 the TCR_EL1.TBI0 bit has always been enabled on the kernel, hence >> +the userspace (EL0) is entitled to perform a user memory access through a >> +64-bit pointer with a non-zero top byte but the resulting pointers are not >> +allowed at the user-kernel syscall ABI boundary. >> + >> +This document describes a relaxation of the ABI that makes it possible to >> +to pass tagged pointers to the syscalls, when these pointers are in memory > > One too many "to" (at the end the previous line). > Yep will fix in v7. >> +ranges obtained as described in section 2. >> + >> +Since it is not desirable to relax the ABI to allow tagged user addresses >> +into the kernel indiscriminately, arm64 provides a new sysctl interface >> +(/proc/sys/abi/tagged_addr) that is used to prevent the applications from >> +enabling the relaxed ABI and a new prctl() interface that can be used to >> +enable or disable the relaxed ABI. >> +A detailed description of the newly introduced mechanisms will be provided >> +in section 2. >> + >> +2. ARM64 Tagged Address ABI >> +--------------------------- >> + >> +From the kernel syscall interface perspective, we define, for the purposes >> +of this document, a "valid tagged pointer" as a pointer that either has a >> +zero value set in the top byte or has a non-zero value, is in memory ranges >> +privately owned by a userspace process and is obtained in one of the >> +following ways: >> +- mmap() done by the process itself, where either: >> + >> + - flags have **MAP_PRIVATE** and **MAP_ANONYMOUS** >> + - flags have **MAP_PRIVATE** and the file descriptor refers to a regular >> + file or **/dev/zero** >> + >> +- brk() system call done by the process itself (i.e. the heap area between >> + the initial location of the program break at process creation and its >> + current location). >> +- any memory mapped by the kernel in the process's address space during >> + creation and with the same restrictions as for mmap() (e.g. data, bss, >> + stack). >> + >> +The ARM64 Tagged Address ABI is an opt-in feature, and an application can >> +control it using the following: >> + >> +- **/proc/sys/abi/tagged_addr**: a new sysctl interface that can be used to >> + prevent the applications from enabling the access to the relaxed ABI. >> + The sysctl supports the following configuration options: >> + >> + - **0**: Disable the access to the ARM64 Tagged Address ABI for all >> + the applications. >> + - **1** (Default): Enable the access to the ARM64 Tagged Address ABI for >> + all the applications. >> + >> + If the access to the ARM64 Tagged Address ABI is disabled at a certain >> + point in time, all the applications that were using tagging before this >> + event occurs, will continue to use tagging. > > "tagging" may be misinterpreted here. I would be more explicit by saying that > the tagged address ABI remains enabled in processes that opted in before the > access got disabled. > Assuming that ARM64 Tagged Address ABI gives access to "tagging" and since it is what this document is talking about, I do not see how it can be misinterpreted ;) >> +- **prctl()s**: >> + >> + - **PR_SET_TAGGED_ADDR_CTRL**: Invoked by a process, can be used to enable or >> + disable its access to the ARM64 Tagged Address ABI. > > I still find the wording confusing, because "access to the ABI" is not used > consistently. The "tagged_addr" sysctl enables *access to the ABI*, that's fine. > However, PR_SET_TAGGED_ADDR_CTRL enables *the ABI itself* (which is only > possible if access to the ABI is enabled). > As it stands, it enables or disables the ABI itself when used with PR_TAGGED_ADDR_ENABLE, or can enable other things in future. IMHO the only thing that these features have in common is the access to the ABI which is granted by this prctl(). >> + >> + The (unsigned int) arg2 argument is a bit mask describing the control mode >> + used: >> + >> + - **PR_TAGGED_ADDR_ENABLE**: Enable ARM64 Tagged Address ABI. >> + >> + The prctl(PR_SET_TAGGED_ADDR_CTRL, ...) will return -EINVAL if the ARM64 >> + Tagged Address ABI is not available. > > For clarity, it would be good to mention that one possible reason for the ABI > not to be available is tagged_addr == 0. > The logical implication is already quite clear tagged_addr == 0 (Disabled) => Tagged Address ABI not available => return -EINVAL. I do not see the need to repeat the concept twice. >> + >> + The arguments arg3, arg4, and arg5 are ignored. >> + - **PR_GET_TAGGED_ADDR_CTRL**: can be used to check the status of the Tagged >> + Address ABI. >> + >> + The arguments arg2, arg3, arg4, and arg5 are ignored. >> + >> +The ABI properties set by the mechanisms described above are inherited by >> threads >> +of the same application and fork()'ed children but cleared by execve(). >> + >> +When a process has successfully opted into the new ABI by invoking >> +PR_SET_TAGGED_ADDR_CTRL prctl(), this guarantees the following behaviours: >> + >> + - Every currently available syscall, except the cases mentioned in section >> 3, can >> + accept any valid tagged pointer. The same rule is applicable to any syscall >> + introduced in the future. > > I thought Catalin wanted to drop this guarantee? > The guarantee is changed and explicitly includes the syscalls that can be added in the future. IMHO since we are defining an ABI, we cannot leave that topic in an uncharted territory, we need to address it. >> + - If a non valid tagged pointer is passed to a syscall then the behaviour >> + is undefined. >> + - Every valid tagged pointer is expected to work as an untagged one. >> + - The kernel preserves any valid tagged pointer and returns it to the >> + userspace unchanged (i.e. on syscall return) in all the cases except the >> + ones documented in the "Preserving tags" section of tagged-pointers.txt. >> + >> +A definition of the meaning of tagged pointers on arm64 can be found in: >> +Documentation/arm64/tagged-pointers.txt. >> + >> +3. ARM64 Tagged Address ABI Exceptions >> +-------------------------------------- >> + >> +The behaviours described in section 2, with particular reference to the >> +acceptance by the syscalls of any valid tagged pointer are not applicable >> +to the following cases: >> + >> + - mmap() addr parameter. >> + - mremap() new_address parameter. >> + - prctl(PR_SET_MM, PR_SET_MM_MAP, ...) struct prctl_mm_map fields. >> + - prctl(PR_SET_MM, PR_SET_MM_MAP_SIZE, ...) struct prctl_mm_map fields. > > All the PR_SET_MM options that specify pointers (PR_SET_MM_START_CODE, > PR_SET_MM_END_CODE, ...) should be excluded as well. AFAICT (but don't take my > word for it), that's all of them except PR_SET_MM_EXE_FILE. Conversely, > PR_SET_MM_MAP_SIZE should not be excluded (it does not pass a prctl_mm_map > struct, and the pointer to unsigned int can be tagged). > Agreed, I clearly misread the prctl() man page here. Fill fix in v7. PR_SET_MM_MAP_SIZE _returns_ struct prctl_mm_map, does not take it as a parameter. Vincenzo > Kevin > >> + >> +Any attempt to use non-zero tagged pointers will lead to undefined behaviour. >> + >> +4. Example of correct usage >> +--------------------------- >> +.. code-block:: c >> + >> + void main(void) >> + { >> + static int tbi_enabled = 0; >> + unsigned long tag = 0; >> + >> + char *ptr = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE, >> + MAP_ANONYMOUS, -1, 0); >> + >> + if (prctl(PR_SET_TAGGED_ADDR_CTRL, PR_TAGGED_ADDR_ENABLE, >> + 0, 0, 0) == 0) >> + tbi_enabled = 1; >> + >> + if (ptr == (void *)-1) /* MAP_FAILED */ >> + return -1; >> + >> + if (tbi_enabled) >> + tag = rand() & 0xff; >> + >> + ptr = (char *)((unsigned long)ptr | (tag << TAG_SHIFT)); >> + >> + *ptr = 'a'; >> + >> + ... >> + } >> + > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On 30/07/2019 14:25, Vincenzo Frascino wrote: > Hi Kevin, > > On 7/30/19 11:32 AM, Kevin Brodsky wrote: >> Some more comments. Mostly minor wording issues, except the prctl() exclusion at >> the end. >> >> On 25/07/2019 14:50, Vincenzo Frascino wrote: >>> On arm64 the TCR_EL1.TBI0 bit has been always enabled hence >>> the userspace (EL0) is allowed to set a non-zero value in the >>> top byte but the resulting pointers are not allowed at the >>> user-kernel syscall ABI boundary. >>> >>> With the relaxed ABI proposed through this document, it is now possible >>> to pass tagged pointers to the syscalls, when these pointers are in >>> memory ranges obtained by an anonymous (MAP_ANONYMOUS) mmap(). >>> >>> This change in the ABI requires a mechanism to requires the userspace >>> to opt-in to such an option. >>> >>> Specify and document the way in which sysctl and prctl() can be used >>> in combination to allow the userspace to opt-in this feature. >>> >>> Cc: Catalin Marinas <catalin.marinas@arm.com> >>> Cc: Will Deacon <will.deacon@arm.com> >>> CC: Andrey Konovalov <andreyknvl@google.com> >>> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> >>> Acked-by: Szabolcs Nagy <szabolcs.nagy@arm.com> >>> --- >>> Documentation/arm64/tagged-address-abi.rst | 148 +++++++++++++++++++++ >>> 1 file changed, 148 insertions(+) >>> create mode 100644 Documentation/arm64/tagged-address-abi.rst >>> >>> diff --git a/Documentation/arm64/tagged-address-abi.rst >>> b/Documentation/arm64/tagged-address-abi.rst >>> new file mode 100644 >>> index 000000000000..a8ecb991de82 >>> --- /dev/null >>> +++ b/Documentation/arm64/tagged-address-abi.rst >>> @@ -0,0 +1,148 @@ >>> +======================== >>> +ARM64 TAGGED ADDRESS ABI >>> +======================== >>> + >>> +Author: Vincenzo Frascino <vincenzo.frascino@arm.com> >>> + >>> +Date: 25 July 2019 >>> + >>> +This document describes the usage and semantics of the Tagged Address >>> +ABI on arm64. >>> + >>> +1. Introduction >>> +--------------- >>> + >>> +On arm64 the TCR_EL1.TBI0 bit has always been enabled on the kernel, hence >>> +the userspace (EL0) is entitled to perform a user memory access through a >>> +64-bit pointer with a non-zero top byte but the resulting pointers are not >>> +allowed at the user-kernel syscall ABI boundary. >>> + >>> +This document describes a relaxation of the ABI that makes it possible to >>> +to pass tagged pointers to the syscalls, when these pointers are in memory >> One too many "to" (at the end the previous line). >> > Yep will fix in v7. > >>> +ranges obtained as described in section 2. >>> + >>> +Since it is not desirable to relax the ABI to allow tagged user addresses >>> +into the kernel indiscriminately, arm64 provides a new sysctl interface >>> +(/proc/sys/abi/tagged_addr) that is used to prevent the applications from >>> +enabling the relaxed ABI and a new prctl() interface that can be used to >>> +enable or disable the relaxed ABI. >>> +A detailed description of the newly introduced mechanisms will be provided >>> +in section 2. >>> + >>> +2. ARM64 Tagged Address ABI >>> +--------------------------- >>> + >>> +From the kernel syscall interface perspective, we define, for the purposes >>> +of this document, a "valid tagged pointer" as a pointer that either has a >>> +zero value set in the top byte or has a non-zero value, is in memory ranges >>> +privately owned by a userspace process and is obtained in one of the >>> +following ways: >>> +- mmap() done by the process itself, where either: >>> + >>> + - flags have **MAP_PRIVATE** and **MAP_ANONYMOUS** >>> + - flags have **MAP_PRIVATE** and the file descriptor refers to a regular >>> + file or **/dev/zero** >>> + >>> +- brk() system call done by the process itself (i.e. the heap area between >>> + the initial location of the program break at process creation and its >>> + current location). >>> +- any memory mapped by the kernel in the process's address space during >>> + creation and with the same restrictions as for mmap() (e.g. data, bss, >>> + stack). >>> + >>> +The ARM64 Tagged Address ABI is an opt-in feature, and an application can >>> +control it using the following: >>> + >>> +- **/proc/sys/abi/tagged_addr**: a new sysctl interface that can be used to >>> + prevent the applications from enabling the access to the relaxed ABI. >>> + The sysctl supports the following configuration options: >>> + >>> + - **0**: Disable the access to the ARM64 Tagged Address ABI for all >>> + the applications. >>> + - **1** (Default): Enable the access to the ARM64 Tagged Address ABI for >>> + all the applications. >>> + >>> + If the access to the ARM64 Tagged Address ABI is disabled at a certain >>> + point in time, all the applications that were using tagging before this >>> + event occurs, will continue to use tagging. >> "tagging" may be misinterpreted here. I would be more explicit by saying that >> the tagged address ABI remains enabled in processes that opted in before the >> access got disabled. >> > Assuming that ARM64 Tagged Address ABI gives access to "tagging" and since it is > what this document is talking about, I do not see how it can be misinterpreted ;) "tagging" is a confusing term ("using tagging" even more so), it could be interpreted as memory tagging (especially in the presence of MTE). This document does not use "tagging" anywhere else, which is good. Let's stick to the same name for the ABI throughout the document, repetition is less problematic than vague wording. > >>> +- **prctl()s**: >>> + >>> + - **PR_SET_TAGGED_ADDR_CTRL**: Invoked by a process, can be used to enable or >>> + disable its access to the ARM64 Tagged Address ABI. >> I still find the wording confusing, because "access to the ABI" is not used >> consistently. The "tagged_addr" sysctl enables *access to the ABI*, that's fine. >> However, PR_SET_TAGGED_ADDR_CTRL enables *the ABI itself* (which is only >> possible if access to the ABI is enabled). >> > As it stands, it enables or disables the ABI itself when used with > PR_TAGGED_ADDR_ENABLE, or can enable other things in future. IMHO the only thing > that these features have in common is the access to the ABI which is granted by > this prctl(). I see your point, you could have other bits controlling other aspects. However, I would really avoid saying that this prctl is used to enable or disable access to the new ABI, because it isn't (either you have access to the new ABI and this prctl can be used, or you don't and this prctl will fail). > >>> + >>> + The (unsigned int) arg2 argument is a bit mask describing the control mode >>> + used: >>> + >>> + - **PR_TAGGED_ADDR_ENABLE**: Enable ARM64 Tagged Address ABI. >>> + >>> + The prctl(PR_SET_TAGGED_ADDR_CTRL, ...) will return -EINVAL if the ARM64 >>> + Tagged Address ABI is not available. >> For clarity, it would be good to mention that one possible reason for the ABI >> not to be available is tagged_addr == 0. >> > The logical implication is already quite clear tagged_addr == 0 (Disabled) => > Tagged Address ABI not available => return -EINVAL. I do not see the need to > repeat the concept twice. > >>> + >>> + The arguments arg3, arg4, and arg5 are ignored. >>> + - **PR_GET_TAGGED_ADDR_CTRL**: can be used to check the status of the Tagged >>> + Address ABI. >>> + >>> + The arguments arg2, arg3, arg4, and arg5 are ignored. >>> + >>> +The ABI properties set by the mechanisms described above are inherited by >>> threads >>> +of the same application and fork()'ed children but cleared by execve(). >>> + >>> +When a process has successfully opted into the new ABI by invoking >>> +PR_SET_TAGGED_ADDR_CTRL prctl(), this guarantees the following behaviours: >>> + >>> + - Every currently available syscall, except the cases mentioned in section >>> 3, can >>> + accept any valid tagged pointer. The same rule is applicable to any syscall >>> + introduced in the future. >> I thought Catalin wanted to drop this guarantee? >> > The guarantee is changed and explicitly includes the syscalls that can be added > in the future. IMHO since we are defining an ABI, we cannot leave that topic in > an uncharted territory, we need to address it. It makes sense to me, just wanted to be sure that Catalin is on the same page. > >>> + - If a non valid tagged pointer is passed to a syscall then the behaviour >>> + is undefined. >>> + - Every valid tagged pointer is expected to work as an untagged one. >>> + - The kernel preserves any valid tagged pointer and returns it to the >>> + userspace unchanged (i.e. on syscall return) in all the cases except the >>> + ones documented in the "Preserving tags" section of tagged-pointers.txt. >>> + >>> +A definition of the meaning of tagged pointers on arm64 can be found in: >>> +Documentation/arm64/tagged-pointers.txt. >>> + >>> +3. ARM64 Tagged Address ABI Exceptions >>> +-------------------------------------- >>> + >>> +The behaviours described in section 2, with particular reference to the >>> +acceptance by the syscalls of any valid tagged pointer are not applicable >>> +to the following cases: >>> + >>> + - mmap() addr parameter. >>> + - mremap() new_address parameter. >>> + - prctl(PR_SET_MM, PR_SET_MM_MAP, ...) struct prctl_mm_map fields. >>> + - prctl(PR_SET_MM, PR_SET_MM_MAP_SIZE, ...) struct prctl_mm_map fields. >> All the PR_SET_MM options that specify pointers (PR_SET_MM_START_CODE, >> PR_SET_MM_END_CODE, ...) should be excluded as well. AFAICT (but don't take my >> word for it), that's all of them except PR_SET_MM_EXE_FILE. Conversely, >> PR_SET_MM_MAP_SIZE should not be excluded (it does not pass a prctl_mm_map >> struct, and the pointer to unsigned int can be tagged). >> > Agreed, I clearly misread the prctl() man page here. Fill fix in v7. > PR_SET_MM_MAP_SIZE _returns_ struct prctl_mm_map, does not take it as a parameter. OK. About PR_SET_MM_MAP_SIZE, it neither takes nor returns struct prctl_mm_map. It writes the size of prctl_map to the int pointed to by arg3, and does nothing else. Therefore, there's no need to exclude it. BTW I've just realised that the man page is wrong about PR_SET_MM_MAP_SIZE, the pointer to int is passed in arg3, not arg4. Anyone knows where to report that? Thanks, Kevin > Vincenzo > >> Kevin >> >>> + >>> +Any attempt to use non-zero tagged pointers will lead to undefined behaviour. >>> + >>> +4. Example of correct usage >>> +--------------------------- >>> +.. code-block:: c >>> + >>> + void main(void) >>> + { >>> + static int tbi_enabled = 0; >>> + unsigned long tag = 0; >>> + >>> + char *ptr = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE, >>> + MAP_ANONYMOUS, -1, 0); >>> + >>> + if (prctl(PR_SET_TAGGED_ADDR_CTRL, PR_TAGGED_ADDR_ENABLE, >>> + 0, 0, 0) == 0) >>> + tbi_enabled = 1; >>> + >>> + if (ptr == (void *)-1) /* MAP_FAILED */ >>> + return -1; >>> + >>> + if (tbi_enabled) >>> + tag = rand() & 0xff; >>> + >>> + ptr = (char *)((unsigned long)ptr | (tag << TAG_SHIFT)); >>> + >>> + *ptr = 'a'; >>> + >>> + ... >>> + } >>> + >> _______________________________________________ >> linux-arm-kernel mailing list >> linux-arm-kernel@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Hi Kevin, On 7/30/19 2:57 PM, Kevin Brodsky wrote: > On 30/07/2019 14:25, Vincenzo Frascino wrote: >> Hi Kevin, >> >> On 7/30/19 11:32 AM, Kevin Brodsky wrote: >>> Some more comments. Mostly minor wording issues, except the prctl() exclusion at >>> the end. >>> >>> On 25/07/2019 14:50, Vincenzo Frascino wrote: >>>> On arm64 the TCR_EL1.TBI0 bit has been always enabled hence >>>> the userspace (EL0) is allowed to set a non-zero value in the >>>> top byte but the resulting pointers are not allowed at the >>>> user-kernel syscall ABI boundary. >>>> >>>> With the relaxed ABI proposed through this document, it is now possible >>>> to pass tagged pointers to the syscalls, when these pointers are in >>>> memory ranges obtained by an anonymous (MAP_ANONYMOUS) mmap(). >>>> >>>> This change in the ABI requires a mechanism to requires the userspace >>>> to opt-in to such an option. >>>> >>>> Specify and document the way in which sysctl and prctl() can be used >>>> in combination to allow the userspace to opt-in this feature. >>>> >>>> Cc: Catalin Marinas <catalin.marinas@arm.com> >>>> Cc: Will Deacon <will.deacon@arm.com> >>>> CC: Andrey Konovalov <andreyknvl@google.com> >>>> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> >>>> Acked-by: Szabolcs Nagy <szabolcs.nagy@arm.com> >>>> --- >>>> Documentation/arm64/tagged-address-abi.rst | 148 +++++++++++++++++++++ >>>> 1 file changed, 148 insertions(+) >>>> create mode 100644 Documentation/arm64/tagged-address-abi.rst >>>> >>>> diff --git a/Documentation/arm64/tagged-address-abi.rst >>>> b/Documentation/arm64/tagged-address-abi.rst >>>> new file mode 100644 >>>> index 000000000000..a8ecb991de82 >>>> --- /dev/null >>>> +++ b/Documentation/arm64/tagged-address-abi.rst >>>> @@ -0,0 +1,148 @@ >>>> +======================== >>>> +ARM64 TAGGED ADDRESS ABI >>>> +======================== >>>> + >>>> +Author: Vincenzo Frascino <vincenzo.frascino@arm.com> >>>> + >>>> +Date: 25 July 2019 >>>> + >>>> +This document describes the usage and semantics of the Tagged Address >>>> +ABI on arm64. >>>> + >>>> +1. Introduction >>>> +--------------- >>>> + >>>> +On arm64 the TCR_EL1.TBI0 bit has always been enabled on the kernel, hence >>>> +the userspace (EL0) is entitled to perform a user memory access through a >>>> +64-bit pointer with a non-zero top byte but the resulting pointers are not >>>> +allowed at the user-kernel syscall ABI boundary. >>>> + >>>> +This document describes a relaxation of the ABI that makes it possible to >>>> +to pass tagged pointers to the syscalls, when these pointers are in memory >>> One too many "to" (at the end the previous line). >>> >> Yep will fix in v7. >> >>>> +ranges obtained as described in section 2. >>>> + >>>> +Since it is not desirable to relax the ABI to allow tagged user addresses >>>> +into the kernel indiscriminately, arm64 provides a new sysctl interface >>>> +(/proc/sys/abi/tagged_addr) that is used to prevent the applications from >>>> +enabling the relaxed ABI and a new prctl() interface that can be used to >>>> +enable or disable the relaxed ABI. >>>> +A detailed description of the newly introduced mechanisms will be provided >>>> +in section 2. >>>> + >>>> +2. ARM64 Tagged Address ABI >>>> +--------------------------- >>>> + >>>> +From the kernel syscall interface perspective, we define, for the purposes >>>> +of this document, a "valid tagged pointer" as a pointer that either has a >>>> +zero value set in the top byte or has a non-zero value, is in memory ranges >>>> +privately owned by a userspace process and is obtained in one of the >>>> +following ways: >>>> +- mmap() done by the process itself, where either: >>>> + >>>> + - flags have **MAP_PRIVATE** and **MAP_ANONYMOUS** >>>> + - flags have **MAP_PRIVATE** and the file descriptor refers to a regular >>>> + file or **/dev/zero** >>>> + >>>> +- brk() system call done by the process itself (i.e. the heap area between >>>> + the initial location of the program break at process creation and its >>>> + current location). >>>> +- any memory mapped by the kernel in the process's address space during >>>> + creation and with the same restrictions as for mmap() (e.g. data, bss, >>>> + stack). >>>> + >>>> +The ARM64 Tagged Address ABI is an opt-in feature, and an application can >>>> +control it using the following: >>>> + >>>> +- **/proc/sys/abi/tagged_addr**: a new sysctl interface that can be used to >>>> + prevent the applications from enabling the access to the relaxed ABI. >>>> + The sysctl supports the following configuration options: >>>> + >>>> + - **0**: Disable the access to the ARM64 Tagged Address ABI for all >>>> + the applications. >>>> + - **1** (Default): Enable the access to the ARM64 Tagged Address ABI for >>>> + all the applications. >>>> + >>>> + If the access to the ARM64 Tagged Address ABI is disabled at a certain >>>> + point in time, all the applications that were using tagging before this >>>> + event occurs, will continue to use tagging. >>> "tagging" may be misinterpreted here. I would be more explicit by saying that >>> the tagged address ABI remains enabled in processes that opted in before the >>> access got disabled. >>> >> Assuming that ARM64 Tagged Address ABI gives access to "tagging" and since it is >> what this document is talking about, I do not see how it can be misinterpreted ;) > > "tagging" is a confusing term ("using tagging" even more so), it could be > interpreted as memory tagging (especially in the presence of MTE). This document > does not use "tagging" anywhere else, which is good. Let's stick to the same > name for the ABI throughout the document, repetition is less problematic than > vague wording. > This document does not cover MTE, it covers the "ARM64 Tagged Address ABI" hence "tagging" has a precise semantical meaning in this context. Still I do not see how it can be confused. >> >>>> +- **prctl()s**: >>>> + >>>> + - **PR_SET_TAGGED_ADDR_CTRL**: Invoked by a process, can be used to >>>> enable or >>>> + disable its access to the ARM64 Tagged Address ABI. >>> I still find the wording confusing, because "access to the ABI" is not used >>> consistently. The "tagged_addr" sysctl enables *access to the ABI*, that's fine. >>> However, PR_SET_TAGGED_ADDR_CTRL enables *the ABI itself* (which is only >>> possible if access to the ABI is enabled). >>> >> As it stands, it enables or disables the ABI itself when used with >> PR_TAGGED_ADDR_ENABLE, or can enable other things in future. IMHO the only thing >> that these features have in common is the access to the ABI which is granted by >> this prctl(). > > I see your point, you could have other bits controlling other aspects. However, > I would really avoid saying that this prctl is used to enable or disable access > to the new ABI, because it isn't (either you have access to the new ABI and this > prctl can be used, or you don't and this prctl will fail). > What is the system wide evidence that the access to the ABI is denied? Or what is the system wide evidence that it is granted? In other words, is it enough for a process to have the sysctl set (system wide) to know that the the ABI is enabled and have granted access to it? or does it need to do something else? >> >>>> + >>>> + The (unsigned int) arg2 argument is a bit mask describing the control mode >>>> + used: >>>> + >>>> + - **PR_TAGGED_ADDR_ENABLE**: Enable ARM64 Tagged Address ABI. >>>> + >>>> + The prctl(PR_SET_TAGGED_ADDR_CTRL, ...) will return -EINVAL if the ARM64 >>>> + Tagged Address ABI is not available. >>> For clarity, it would be good to mention that one possible reason for the ABI >>> not to be available is tagged_addr == 0. >>> >> The logical implication is already quite clear tagged_addr == 0 (Disabled) => >> Tagged Address ABI not available => return -EINVAL. I do not see the need to >> repeat the concept twice. >> >>>> + >>>> + The arguments arg3, arg4, and arg5 are ignored. >>>> + - **PR_GET_TAGGED_ADDR_CTRL**: can be used to check the status of the Tagged >>>> + Address ABI. >>>> + >>>> + The arguments arg2, arg3, arg4, and arg5 are ignored. >>>> + >>>> +The ABI properties set by the mechanisms described above are inherited by >>>> threads >>>> +of the same application and fork()'ed children but cleared by execve(). >>>> + >>>> +When a process has successfully opted into the new ABI by invoking >>>> +PR_SET_TAGGED_ADDR_CTRL prctl(), this guarantees the following behaviours: >>>> + >>>> + - Every currently available syscall, except the cases mentioned in section >>>> 3, can >>>> + accept any valid tagged pointer. The same rule is applicable to any syscall >>>> + introduced in the future. >>> I thought Catalin wanted to drop this guarantee? >>> >> The guarantee is changed and explicitly includes the syscalls that can be added >> in the future. IMHO since we are defining an ABI, we cannot leave that topic in >> an uncharted territory, we need to address it. > > It makes sense to me, just wanted to be sure that Catalin is on the same page. > >> >>>> + - If a non valid tagged pointer is passed to a syscall then the behaviour >>>> + is undefined. >>>> + - Every valid tagged pointer is expected to work as an untagged one. >>>> + - The kernel preserves any valid tagged pointer and returns it to the >>>> + userspace unchanged (i.e. on syscall return) in all the cases except the >>>> + ones documented in the "Preserving tags" section of tagged-pointers.txt. >>>> + >>>> +A definition of the meaning of tagged pointers on arm64 can be found in: >>>> +Documentation/arm64/tagged-pointers.txt. >>>> + >>>> +3. ARM64 Tagged Address ABI Exceptions >>>> +-------------------------------------- >>>> + >>>> +The behaviours described in section 2, with particular reference to the >>>> +acceptance by the syscalls of any valid tagged pointer are not applicable >>>> +to the following cases: >>>> + >>>> + - mmap() addr parameter. >>>> + - mremap() new_address parameter. >>>> + - prctl(PR_SET_MM, PR_SET_MM_MAP, ...) struct prctl_mm_map fields. >>>> + - prctl(PR_SET_MM, PR_SET_MM_MAP_SIZE, ...) struct prctl_mm_map fields. >>> All the PR_SET_MM options that specify pointers (PR_SET_MM_START_CODE, >>> PR_SET_MM_END_CODE, ...) should be excluded as well. AFAICT (but don't take my >>> word for it), that's all of them except PR_SET_MM_EXE_FILE. Conversely, >>> PR_SET_MM_MAP_SIZE should not be excluded (it does not pass a prctl_mm_map >>> struct, and the pointer to unsigned int can be tagged). >>> >> Agreed, I clearly misread the prctl() man page here. Fill fix in v7. >> PR_SET_MM_MAP_SIZE _returns_ struct prctl_mm_map, does not take it as a >> parameter. > > OK. About PR_SET_MM_MAP_SIZE, it neither takes nor returns struct prctl_mm_map. > It writes the size of prctl_map to the int pointed to by arg3, and does nothing > else. Therefore, there's no need to exclude it. > Agreed, I missed the word size in my reply: s/_returns_ struct prctl_mm_map/_returns_ the size of struct prctl_mm_map/ > BTW I've just realised that the man page is wrong about PR_SET_MM_MAP_SIZE, the > pointer to int is passed in arg3, not arg4. Anyone knows where to report that? > > Thanks, > Kevin > >> Vincenzo >> >>> Kevin >>> >>>> + >>>> +Any attempt to use non-zero tagged pointers will lead to undefined behaviour. >>>> + >>>> +4. Example of correct usage >>>> +--------------------------- >>>> +.. code-block:: c >>>> + >>>> + void main(void) >>>> + { >>>> + static int tbi_enabled = 0; >>>> + unsigned long tag = 0; >>>> + >>>> + char *ptr = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE, >>>> + MAP_ANONYMOUS, -1, 0); >>>> + >>>> + if (prctl(PR_SET_TAGGED_ADDR_CTRL, PR_TAGGED_ADDR_ENABLE, >>>> + 0, 0, 0) == 0) >>>> + tbi_enabled = 1; >>>> + >>>> + if (ptr == (void *)-1) /* MAP_FAILED */ >>>> + return -1; >>>> + >>>> + if (tbi_enabled) >>>> + tag = rand() & 0xff; >>>> + >>>> + ptr = (char *)((unsigned long)ptr | (tag << TAG_SHIFT)); >>>> + >>>> + *ptr = 'a'; >>>> + >>>> + ... >>>> + } >>>> + >>> _______________________________________________ >>> linux-arm-kernel mailing list >>> linux-arm-kernel@lists.infradead.org >>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >
On 30/07/2019 15:24, Vincenzo Frascino wrote: > Hi Kevin, > > On 7/30/19 2:57 PM, Kevin Brodsky wrote: >> On 30/07/2019 14:25, Vincenzo Frascino wrote: >>> Hi Kevin, >>> >>> On 7/30/19 11:32 AM, Kevin Brodsky wrote: >>>> Some more comments. Mostly minor wording issues, except the prctl() exclusion at >>>> the end. >>>> >>>> On 25/07/2019 14:50, Vincenzo Frascino wrote: >>>>> On arm64 the TCR_EL1.TBI0 bit has been always enabled hence >>>>> the userspace (EL0) is allowed to set a non-zero value in the >>>>> top byte but the resulting pointers are not allowed at the >>>>> user-kernel syscall ABI boundary. >>>>> >>>>> With the relaxed ABI proposed through this document, it is now possible >>>>> to pass tagged pointers to the syscalls, when these pointers are in >>>>> memory ranges obtained by an anonymous (MAP_ANONYMOUS) mmap(). >>>>> >>>>> This change in the ABI requires a mechanism to requires the userspace >>>>> to opt-in to such an option. >>>>> >>>>> Specify and document the way in which sysctl and prctl() can be used >>>>> in combination to allow the userspace to opt-in this feature. >>>>> >>>>> Cc: Catalin Marinas <catalin.marinas@arm.com> >>>>> Cc: Will Deacon <will.deacon@arm.com> >>>>> CC: Andrey Konovalov <andreyknvl@google.com> >>>>> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> >>>>> Acked-by: Szabolcs Nagy <szabolcs.nagy@arm.com> >>>>> --- >>>>> Documentation/arm64/tagged-address-abi.rst | 148 +++++++++++++++++++++ >>>>> 1 file changed, 148 insertions(+) >>>>> create mode 100644 Documentation/arm64/tagged-address-abi.rst >>>>> >>>>> diff --git a/Documentation/arm64/tagged-address-abi.rst >>>>> b/Documentation/arm64/tagged-address-abi.rst >>>>> new file mode 100644 >>>>> index 000000000000..a8ecb991de82 >>>>> --- /dev/null >>>>> +++ b/Documentation/arm64/tagged-address-abi.rst >>>>> @@ -0,0 +1,148 @@ >>>>> +======================== >>>>> +ARM64 TAGGED ADDRESS ABI >>>>> +======================== >>>>> + >>>>> +Author: Vincenzo Frascino <vincenzo.frascino@arm.com> >>>>> + >>>>> +Date: 25 July 2019 >>>>> + >>>>> +This document describes the usage and semantics of the Tagged Address >>>>> +ABI on arm64. >>>>> + >>>>> +1. Introduction >>>>> +--------------- >>>>> + >>>>> +On arm64 the TCR_EL1.TBI0 bit has always been enabled on the kernel, hence >>>>> +the userspace (EL0) is entitled to perform a user memory access through a >>>>> +64-bit pointer with a non-zero top byte but the resulting pointers are not >>>>> +allowed at the user-kernel syscall ABI boundary. >>>>> + >>>>> +This document describes a relaxation of the ABI that makes it possible to >>>>> +to pass tagged pointers to the syscalls, when these pointers are in memory >>>> One too many "to" (at the end the previous line). >>>> >>> Yep will fix in v7. >>> >>>>> +ranges obtained as described in section 2. >>>>> + >>>>> +Since it is not desirable to relax the ABI to allow tagged user addresses >>>>> +into the kernel indiscriminately, arm64 provides a new sysctl interface >>>>> +(/proc/sys/abi/tagged_addr) that is used to prevent the applications from >>>>> +enabling the relaxed ABI and a new prctl() interface that can be used to >>>>> +enable or disable the relaxed ABI. >>>>> +A detailed description of the newly introduced mechanisms will be provided >>>>> +in section 2. >>>>> + >>>>> +2. ARM64 Tagged Address ABI >>>>> +--------------------------- >>>>> + >>>>> +From the kernel syscall interface perspective, we define, for the purposes >>>>> +of this document, a "valid tagged pointer" as a pointer that either has a >>>>> +zero value set in the top byte or has a non-zero value, is in memory ranges >>>>> +privately owned by a userspace process and is obtained in one of the >>>>> +following ways: >>>>> +- mmap() done by the process itself, where either: >>>>> + >>>>> + - flags have **MAP_PRIVATE** and **MAP_ANONYMOUS** >>>>> + - flags have **MAP_PRIVATE** and the file descriptor refers to a regular >>>>> + file or **/dev/zero** >>>>> + >>>>> +- brk() system call done by the process itself (i.e. the heap area between >>>>> + the initial location of the program break at process creation and its >>>>> + current location). >>>>> +- any memory mapped by the kernel in the process's address space during >>>>> + creation and with the same restrictions as for mmap() (e.g. data, bss, >>>>> + stack). >>>>> + >>>>> +The ARM64 Tagged Address ABI is an opt-in feature, and an application can >>>>> +control it using the following: >>>>> + >>>>> +- **/proc/sys/abi/tagged_addr**: a new sysctl interface that can be used to >>>>> + prevent the applications from enabling the access to the relaxed ABI. >>>>> + The sysctl supports the following configuration options: >>>>> + >>>>> + - **0**: Disable the access to the ARM64 Tagged Address ABI for all >>>>> + the applications. >>>>> + - **1** (Default): Enable the access to the ARM64 Tagged Address ABI for >>>>> + all the applications. >>>>> + >>>>> + If the access to the ARM64 Tagged Address ABI is disabled at a certain >>>>> + point in time, all the applications that were using tagging before this >>>>> + event occurs, will continue to use tagging. >>>> "tagging" may be misinterpreted here. I would be more explicit by saying that >>>> the tagged address ABI remains enabled in processes that opted in before the >>>> access got disabled. >>>> >>> Assuming that ARM64 Tagged Address ABI gives access to "tagging" and since it is >>> what this document is talking about, I do not see how it can be misinterpreted ;) >> "tagging" is a confusing term ("using tagging" even more so), it could be >> interpreted as memory tagging (especially in the presence of MTE). This document >> does not use "tagging" anywhere else, which is good. Let's stick to the same >> name for the ABI throughout the document, repetition is less problematic than >> vague wording. >> > This document does not cover MTE, it covers the "ARM64 Tagged Address ABI" hence > "tagging" has a precise semantical meaning in this context. Still I do not see > how it can be confused. > >>>>> +- **prctl()s**: >>>>> + >>>>> + - **PR_SET_TAGGED_ADDR_CTRL**: Invoked by a process, can be used to >>>>> enable or >>>>> + disable its access to the ARM64 Tagged Address ABI. >>>> I still find the wording confusing, because "access to the ABI" is not used >>>> consistently. The "tagged_addr" sysctl enables *access to the ABI*, that's fine. >>>> However, PR_SET_TAGGED_ADDR_CTRL enables *the ABI itself* (which is only >>>> possible if access to the ABI is enabled). >>>> >>> As it stands, it enables or disables the ABI itself when used with >>> PR_TAGGED_ADDR_ENABLE, or can enable other things in future. IMHO the only thing >>> that these features have in common is the access to the ABI which is granted by >>> this prctl(). >> I see your point, you could have other bits controlling other aspects. However, >> I would really avoid saying that this prctl is used to enable or disable access >> to the new ABI, because it isn't (either you have access to the new ABI and this >> prctl can be used, or you don't and this prctl will fail). >> > What is the system wide evidence that the access to the ABI is denied? Or what > is the system wide evidence that it is granted? > > In other words, is it enough for a process to have the sysctl set (system wide) > to know that the the ABI is enabled and have granted access to it? or does it > need to do something else? I think we really have a wording problem here, which is why this part of the document and this discussion is confusing. tagged_addr=1 (system-wide) allows processes to enable the tagged address ABI by calling prctl(PR_SET_TAGGED_ADDR_CTRL). It does not alter the state of any running process, and does not enable the ABI by default for new processes either. Conversely, when tagged_addr=0, that prctl() is always denied. The current description of the sysctl and prctl does not make that clear. I think that it would be much more obvious by reorganising that section as such: - prctl() first, the current wording is fine. - sysctl() second, described *only* in terms of the prctl() (denying PR_SET_TAGGED_ADDR_CTRL or not), and nothing else, to avoid wording issues. It's certainly not the only way to do it, but that would be much clearer to me :) Kevin >>>>> + >>>>> + The (unsigned int) arg2 argument is a bit mask describing the control mode >>>>> + used: >>>>> + >>>>> + - **PR_TAGGED_ADDR_ENABLE**: Enable ARM64 Tagged Address ABI. >>>>> + >>>>> + The prctl(PR_SET_TAGGED_ADDR_CTRL, ...) will return -EINVAL if the ARM64 >>>>> + Tagged Address ABI is not available. >>>> For clarity, it would be good to mention that one possible reason for the ABI >>>> not to be available is tagged_addr == 0. >>>> >>> The logical implication is already quite clear tagged_addr == 0 (Disabled) => >>> Tagged Address ABI not available => return -EINVAL. I do not see the need to >>> repeat the concept twice. >>> >>>>> + >>>>> + The arguments arg3, arg4, and arg5 are ignored. >>>>> + - **PR_GET_TAGGED_ADDR_CTRL**: can be used to check the status of the Tagged >>>>> + Address ABI. >>>>> + >>>>> + The arguments arg2, arg3, arg4, and arg5 are ignored. >>>>> + >>>>> +The ABI properties set by the mechanisms described above are inherited by >>>>> threads >>>>> +of the same application and fork()'ed children but cleared by execve(). >>>>> + >>>>> +When a process has successfully opted into the new ABI by invoking >>>>> +PR_SET_TAGGED_ADDR_CTRL prctl(), this guarantees the following behaviours: >>>>> + >>>>> + - Every currently available syscall, except the cases mentioned in section >>>>> 3, can >>>>> + accept any valid tagged pointer. The same rule is applicable to any syscall >>>>> + introduced in the future. >>>> I thought Catalin wanted to drop this guarantee? >>>> >>> The guarantee is changed and explicitly includes the syscalls that can be added >>> in the future. IMHO since we are defining an ABI, we cannot leave that topic in >>> an uncharted territory, we need to address it. >> It makes sense to me, just wanted to be sure that Catalin is on the same page. >> >>>>> + - If a non valid tagged pointer is passed to a syscall then the behaviour >>>>> + is undefined. >>>>> + - Every valid tagged pointer is expected to work as an untagged one. >>>>> + - The kernel preserves any valid tagged pointer and returns it to the >>>>> + userspace unchanged (i.e. on syscall return) in all the cases except the >>>>> + ones documented in the "Preserving tags" section of tagged-pointers.txt. >>>>> + >>>>> +A definition of the meaning of tagged pointers on arm64 can be found in: >>>>> +Documentation/arm64/tagged-pointers.txt. >>>>> + >>>>> +3. ARM64 Tagged Address ABI Exceptions >>>>> +-------------------------------------- >>>>> + >>>>> +The behaviours described in section 2, with particular reference to the >>>>> +acceptance by the syscalls of any valid tagged pointer are not applicable >>>>> +to the following cases: >>>>> + >>>>> + - mmap() addr parameter. >>>>> + - mremap() new_address parameter. >>>>> + - prctl(PR_SET_MM, PR_SET_MM_MAP, ...) struct prctl_mm_map fields. >>>>> + - prctl(PR_SET_MM, PR_SET_MM_MAP_SIZE, ...) struct prctl_mm_map fields. >>>> All the PR_SET_MM options that specify pointers (PR_SET_MM_START_CODE, >>>> PR_SET_MM_END_CODE, ...) should be excluded as well. AFAICT (but don't take my >>>> word for it), that's all of them except PR_SET_MM_EXE_FILE. Conversely, >>>> PR_SET_MM_MAP_SIZE should not be excluded (it does not pass a prctl_mm_map >>>> struct, and the pointer to unsigned int can be tagged). >>>> >>> Agreed, I clearly misread the prctl() man page here. Fill fix in v7. >>> PR_SET_MM_MAP_SIZE _returns_ struct prctl_mm_map, does not take it as a >>> parameter. >> OK. About PR_SET_MM_MAP_SIZE, it neither takes nor returns struct prctl_mm_map. >> It writes the size of prctl_map to the int pointed to by arg3, and does nothing >> else. Therefore, there's no need to exclude it. >> > Agreed, I missed the word size in my reply: s/_returns_ struct > prctl_mm_map/_returns_ the size of struct prctl_mm_map/ > >> BTW I've just realised that the man page is wrong about PR_SET_MM_MAP_SIZE, the >> pointer to int is passed in arg3, not arg4. Anyone knows where to report that? >> >> Thanks, >> Kevin >> >>> Vincenzo >>> >>>> Kevin >>>> >>>>> + >>>>> +Any attempt to use non-zero tagged pointers will lead to undefined behaviour. >>>>> + >>>>> +4. Example of correct usage >>>>> +--------------------------- >>>>> +.. code-block:: c >>>>> + >>>>> + void main(void) >>>>> + { >>>>> + static int tbi_enabled = 0; >>>>> + unsigned long tag = 0; >>>>> + >>>>> + char *ptr = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE, >>>>> + MAP_ANONYMOUS, -1, 0); >>>>> + >>>>> + if (prctl(PR_SET_TAGGED_ADDR_CTRL, PR_TAGGED_ADDR_ENABLE, >>>>> + 0, 0, 0) == 0) >>>>> + tbi_enabled = 1; >>>>> + >>>>> + if (ptr == (void *)-1) /* MAP_FAILED */ >>>>> + return -1; >>>>> + >>>>> + if (tbi_enabled) >>>>> + tag = rand() & 0xff; >>>>> + >>>>> + ptr = (char *)((unsigned long)ptr | (tag << TAG_SHIFT)); >>>>> + >>>>> + *ptr = 'a'; >>>>> + >>>>> + ... >>>>> + } >>>>> + >>>> _______________________________________________ >>>> linux-arm-kernel mailing list >>>> linux-arm-kernel@lists.infradead.org >>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On 7/25/19 6:50 AM, Vincenzo Frascino wrote: > With the relaxed ABI proposed through this document, it is now possible > to pass tagged pointers to the syscalls, when these pointers are in > memory ranges obtained by an anonymous (MAP_ANONYMOUS) mmap(). I don't see a lot of description of why this restriction is necessary. What's the problem with supporting MAP_SHARED?
Hi Dave, On Wed, Jul 31, 2019 at 09:43:46AM -0700, Dave Hansen wrote: > On 7/25/19 6:50 AM, Vincenzo Frascino wrote: > > With the relaxed ABI proposed through this document, it is now possible > > to pass tagged pointers to the syscalls, when these pointers are in > > memory ranges obtained by an anonymous (MAP_ANONYMOUS) mmap(). > > I don't see a lot of description of why this restriction is necessary. > What's the problem with supporting MAP_SHARED? We could support MAP_SHARED | MAP_ANONYMOUS (and based on some internal discussions, this would be fine with the hardware memory tagging as well). What we don't want in the ABI is to support file mmap() for top-byte-ignore (or MTE). If you see a use-case, please let us know.
diff --git a/Documentation/arm64/tagged-address-abi.rst b/Documentation/arm64/tagged-address-abi.rst new file mode 100644 index 000000000000..a8ecb991de82 --- /dev/null +++ b/Documentation/arm64/tagged-address-abi.rst @@ -0,0 +1,148 @@ +======================== +ARM64 TAGGED ADDRESS ABI +======================== + +Author: Vincenzo Frascino <vincenzo.frascino@arm.com> + +Date: 25 July 2019 + +This document describes the usage and semantics of the Tagged Address +ABI on arm64. + +1. Introduction +--------------- + +On arm64 the TCR_EL1.TBI0 bit has always been enabled on the kernel, hence +the userspace (EL0) is entitled to perform a user memory access through a +64-bit pointer with a non-zero top byte but the resulting pointers are not +allowed at the user-kernel syscall ABI boundary. + +This document describes a relaxation of the ABI that makes it possible to +to pass tagged pointers to the syscalls, when these pointers are in memory +ranges obtained as described in section 2. + +Since it is not desirable to relax the ABI to allow tagged user addresses +into the kernel indiscriminately, arm64 provides a new sysctl interface +(/proc/sys/abi/tagged_addr) that is used to prevent the applications from +enabling the relaxed ABI and a new prctl() interface that can be used to +enable or disable the relaxed ABI. +A detailed description of the newly introduced mechanisms will be provided +in section 2. + +2. ARM64 Tagged Address ABI +--------------------------- + +From the kernel syscall interface perspective, we define, for the purposes +of this document, a "valid tagged pointer" as a pointer that either has a +zero value set in the top byte or has a non-zero value, is in memory ranges +privately owned by a userspace process and is obtained in one of the +following ways: +- mmap() done by the process itself, where either: + + - flags have **MAP_PRIVATE** and **MAP_ANONYMOUS** + - flags have **MAP_PRIVATE** and the file descriptor refers to a regular + file or **/dev/zero** + +- brk() system call done by the process itself (i.e. the heap area between + the initial location of the program break at process creation and its + current location). +- any memory mapped by the kernel in the process's address space during + creation and with the same restrictions as for mmap() (e.g. data, bss, + stack). + +The ARM64 Tagged Address ABI is an opt-in feature, and an application can +control it using the following: + +- **/proc/sys/abi/tagged_addr**: a new sysctl interface that can be used to + prevent the applications from enabling the access to the relaxed ABI. + The sysctl supports the following configuration options: + + - **0**: Disable the access to the ARM64 Tagged Address ABI for all + the applications. + - **1** (Default): Enable the access to the ARM64 Tagged Address ABI for + all the applications. + + If the access to the ARM64 Tagged Address ABI is disabled at a certain + point in time, all the applications that were using tagging before this + event occurs, will continue to use tagging. +- **prctl()s**: + + - **PR_SET_TAGGED_ADDR_CTRL**: Invoked by a process, can be used to enable or + disable its access to the ARM64 Tagged Address ABI. + + The (unsigned int) arg2 argument is a bit mask describing the control mode + used: + + - **PR_TAGGED_ADDR_ENABLE**: Enable ARM64 Tagged Address ABI. + + The prctl(PR_SET_TAGGED_ADDR_CTRL, ...) will return -EINVAL if the ARM64 + Tagged Address ABI is not available. + + The arguments arg3, arg4, and arg5 are ignored. + - **PR_GET_TAGGED_ADDR_CTRL**: can be used to check the status of the Tagged + Address ABI. + + The arguments arg2, arg3, arg4, and arg5 are ignored. + +The ABI properties set by the mechanisms described above are inherited by threads +of the same application and fork()'ed children but cleared by execve(). + +When a process has successfully opted into the new ABI by invoking +PR_SET_TAGGED_ADDR_CTRL prctl(), this guarantees the following behaviours: + + - Every currently available syscall, except the cases mentioned in section 3, can + accept any valid tagged pointer. The same rule is applicable to any syscall + introduced in the future. + - If a non valid tagged pointer is passed to a syscall then the behaviour + is undefined. + - Every valid tagged pointer is expected to work as an untagged one. + - The kernel preserves any valid tagged pointer and returns it to the + userspace unchanged (i.e. on syscall return) in all the cases except the + ones documented in the "Preserving tags" section of tagged-pointers.txt. + +A definition of the meaning of tagged pointers on arm64 can be found in: +Documentation/arm64/tagged-pointers.txt. + +3. ARM64 Tagged Address ABI Exceptions +-------------------------------------- + +The behaviours described in section 2, with particular reference to the +acceptance by the syscalls of any valid tagged pointer are not applicable +to the following cases: + + - mmap() addr parameter. + - mremap() new_address parameter. + - prctl(PR_SET_MM, PR_SET_MM_MAP, ...) struct prctl_mm_map fields. + - prctl(PR_SET_MM, PR_SET_MM_MAP_SIZE, ...) struct prctl_mm_map fields. + +Any attempt to use non-zero tagged pointers will lead to undefined behaviour. + +4. Example of correct usage +--------------------------- +.. code-block:: c + + void main(void) + { + static int tbi_enabled = 0; + unsigned long tag = 0; + + char *ptr = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE, + MAP_ANONYMOUS, -1, 0); + + if (prctl(PR_SET_TAGGED_ADDR_CTRL, PR_TAGGED_ADDR_ENABLE, + 0, 0, 0) == 0) + tbi_enabled = 1; + + if (ptr == (void *)-1) /* MAP_FAILED */ + return -1; + + if (tbi_enabled) + tag = rand() & 0xff; + + ptr = (char *)((unsigned long)ptr | (tag << TAG_SHIFT)); + + *ptr = 'a'; + + ... + } +