| Message ID | 20190812210428.1668b6d8@archlinux (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [PULL] First set of new device support, cleanups and features for IIO in the 5.4 cycle. | expand |
On Mon, Aug 12, 2019 at 09:04:28PM +0100, Jonathan Cameron wrote: > The following changes since commit e59fc52529118aaad9aa666f25530dde6e2180e9: > > staging: rtl8192*: display ESSIDs using %pE (2019-07-25 14:38:52 +0200) > > are available in the Git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.4a Pulled and pushed out, thanks. greg k-h
On Mon, Aug 12, 2019 at 10:59:32PM +0200, Greg KH wrote: > On Mon, Aug 12, 2019 at 09:04:28PM +0100, Jonathan Cameron wrote: > > The following changes since commit e59fc52529118aaad9aa666f25530dde6e2180e9: > > > > staging: rtl8192*: display ESSIDs using %pE (2019-07-25 14:38:52 +0200) > > > > are available in the Git repository at: > > > > git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.4a > > Pulled and pushed out, thanks. 0-day gives me the following warning, did you not see this on your tree? Can you send me a patch to fix this up? thanks, greg k-h ---------------- tree/branch: https://kernel.googlesource.com/pub/scm/linux/kernel/git/gregkh/staging.git staging-testing branch HEAD: 6aed51d8912460cab375f7fc4ea834851e107b7a Merge tag 'iio-for-5.4a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Regressions in current branch: drivers/iio/light/noa1305.c:87:9: warning: this statement may fall through [-Wimplicit-fallthrough=]
On Tue, 13 Aug 2019 10:14:19 +0200 Greg KH <gregkh@linuxfoundation.org> wrote: > On Mon, Aug 12, 2019 at 10:59:32PM +0200, Greg KH wrote: > > On Mon, Aug 12, 2019 at 09:04:28PM +0100, Jonathan Cameron wrote: > > > The following changes since commit e59fc52529118aaad9aa666f25530dde6e2180e9: > > > > > > staging: rtl8192*: display ESSIDs using %pE (2019-07-25 14:38:52 +0200) > > > > > > are available in the Git repository at: > > > > > > git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.4a > > > > Pulled and pushed out, thanks. > > 0-day gives me the following warning, did you not see this on your tree? Looks like my tree was based before the change that enabled the warning by default (I didn't check but a quick build shows it doesn't occur with iio.git/togreg and does with staging/staging-testing I can't actually find any completion message from 0-day so not sure if this hit an outage or if I'm not getting the completion messages for some reason. Oops on missing this one in review! > > Can you send me a patch to fix this up? On it's way. Jonathan > > thanks, > > greg k-h > > ---------------- > tree/branch: https://kernel.googlesource.com/pub/scm/linux/kernel/git/gregkh/staging.git staging-testing > branch HEAD: 6aed51d8912460cab375f7fc4ea834851e107b7a Merge tag 'iio-for-5.4a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next > > Regressions in current branch: > > drivers/iio/light/noa1305.c:87:9: warning: this statement may fall through [-Wimplicit-fallthrough=] > >
On Tue, Aug 13, 2019 at 02:34:21PM +0100, Jonathan Cameron wrote: > On Tue, 13 Aug 2019 10:14:19 +0200 > Greg KH <gregkh@linuxfoundation.org> wrote: > > > On Mon, Aug 12, 2019 at 10:59:32PM +0200, Greg KH wrote: > > > On Mon, Aug 12, 2019 at 09:04:28PM +0100, Jonathan Cameron wrote: > > > > The following changes since commit e59fc52529118aaad9aa666f25530dde6e2180e9: > > > > > > > > staging: rtl8192*: display ESSIDs using %pE (2019-07-25 14:38:52 +0200) > > > > > > > > are available in the Git repository at: > > > > > > > > git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.4a > > > > > > Pulled and pushed out, thanks. > > > > 0-day gives me the following warning, did you not see this on your tree? > > Looks like my tree was based before the change that enabled the warning > by default (I didn't check but a quick build shows it doesn't occur with > iio.git/togreg and does with staging/staging-testing That compiler isn't "on" yet in our trees, which is why we all missed it locally. > I can't actually find any completion message from 0-day so not sure if this > hit an outage or if I'm not getting the completion messages for some reason. 0-day is being slow/flakey these days :( > Oops on missing this one in review! Not a problem, nice to see it's an actual bug :) thanks, greg k-h
The following changes since commit e59fc52529118aaad9aa666f25530dde6e2180e9: staging: rtl8192*: display ESSIDs using %pE (2019-07-25 14:38:52 +0200) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.4a for you to fetch changes up to ef19ee60f9cf713518c1d5e15946466d51e9f00b: iio: hi8435: Drop hi8435_remove() by using devres for remaining elements (2019-08-11 09:59:38 +0100) ---------------------------------------------------------------- First set of new device support, features and cleanups for IIO in the 5.4 cycle Note includes a merge from i3c tree to get support needed for stm_lsm6dsx driver support for l3c devices. Done from immutable branch. A counter subsystem patche in here as well. Alongside the new device support (which is always good), Chuhong's work on using devres managed APIs has cleaned up a number of drivers. New device support * adis16460 - New driver based on ADIS framework which needed addition of support for cs_change_delay. Includes device tree binding. * cros_ec - Support fo the veyron-minnie which uses an older interface. * lsm6dsx - Support for LSM6DSTR-C gyro + magnetometer sensor (new IDs mainly) - Support for ISM330DHCX acc + gyro sensor (extensive rework needed!) * Maxim 5432 - New driver support MAX5432-MAX5435 family of potentiometers. * noa1305 - New driver for this ON Semiconductor Ambient light sensor. Features and cleanups * tree wide - Drop error prints after platform_get_irq as already prints errors internally if any occur. * docs - Document mounting matrix. - Fix a missing newline at end of file. * ad2s1210 - Switch to device managed APIs for all of probe and drop explicit remove. * ad7192 - Add of_device_id array to explicity handling DT bindings. * ad7606 - Lots of rework leading to support for software configure modes in ad7616 parts. - Debugfs register access support. * am2315 - Switch to device managed APIs for all of probe and drop explicit remove. * apds9960 - Typo in module description. * cm36651 - Convert to i2c_new_dummy_device. - Swithc to device managed APIs for all of probe adn drop explicit remove. * cros_ec - Calibscale support for accel, gyro and magnetometer. - Tidy up some error codes to return the error from the stack rather than -EIO. - Determine protocol version. - Add a sign vector to the core to fix sensor rotation if necessary. Cannot just be done with mount matrix as already in use in many devices. - Tidy up INFO_SCALE being in both the separate and shared lists. - Drop a lot of dplicate code from the cros-ec-accel-legacy driver and use the core provided code instead. - Make frequency range available to userspace. * counter / ftm-quaddec - Switch to device managed APIs for all of probe adn drop explicit remove. * hdc100x - Switch to device managed APIs for all of probe and drop explicit remove. * hi8435 - Use gpiod_set_value_cansleep as we don't care here and there is a board out there where it needs to sleep. - Switch to device managed APIs for all of probe and drop explict remove. * hp03 - Convert to i2c_new_dummy_device. * maxim thermocouple - Switch to device managed APIs for all of probe and drop explicit remove. * mmc35240 - Fix typo in constant naming. * mpu6050 - Use devm_add_action_or_reset in place of explicit error handling. - Make text in Kconfig more explicit about which parts are supported. * mxc4005 - Switch to device managed APIs for all of probe and drop explicit remove. * pms7003 - Convert device tree bindings to yaml. - Add a MAINTAINERS entry * sc27xx - Introduce a local struct device *dev pointer to avoid lots of deref. - Use devm_add_action_or_reset in place of explicit error handling. * sca3000 - Typo fix in naming. * si1145 - Switch to device managed APIs for all of probe and drop explicit remove. * st_sensors - Lots of rework to enable switch to regmap. - Regmap conversion at the end. - Tidy up some inconsistencies in buffer setup ops. - Tidy up an oddity by dropping get_irq_data_ready function in favour of direct access. - Stop allocating buffer in buffer enable in favour of just embedding a large enough constant size buffer in the iio_priv accessed structure. * st_lsm6dsx - l3c device support (LSM6DSO and LSM6DSR) - tidy up irq return logic which was strangely written. - fix up an ABI quirk where this driver used separate scale attributes, even though they were always shared by type. * stk33xx - Device tree bindings include manufacturer ID. * stm32-adc - Add control for supply to analog switches including DT bindings. * stm32 timer - Drop the quadrature mode support. Believed there were no users so take this opportunity to drop this unwanted ABI. * tsl2772 - Switch to device mangage APIs for all of probe and drop explicit remove. - Use regulator_bulk_* APIs to reduce repitition. * veml6070 - Convert to i2c_new_dummy_device. ---------------------------------------------------------------- Alexandru Ardelean (3): iio: imu: adis: Add support for SPI transfer cs_change_delay iio: imu: Add support for the ADIS16460 IMU dt-bindings: iio: imu: add bindings for ADIS16460 Andrey Smirnov (2): iio: hi8435: Use gpiod_set_value_cansleep() iio: hi8435: Drop hi8435_remove() by using devres for remaining elements Beniamin Bia (5): iio: adc: ad7606: Move common channel definition to header iio: adc: ad7606: Move spi dependent features to spi file iio: adc: ad7606: Allow reconfigration after reset iio: adc: ad7606: Add support for software mode for ad7616 iio: adc: ad7606: Add debug mode for ad7616 Benjamin Gaignard (1): IIO: stm32: Remove quadrature related functions from trigger driver Bárbara Fernandes (1): staging: iio: ad7192: create of_device_id array Christophe JAILLET (3): iio: sca3000: Fix a typo iio: light: apds9960: Fix a typo iio: magnetometer: mmc35240: Fix a typo in the name of a constant Chuhong Yuan (11): iio: maxim_thermocouple: Use device-managed APIs staging: iio: ad2s1210: Use device-managed API iio: humidity: Use device-managed APIs iio: mxc4005: Use device-managed APIs counter/ftm-quaddec: Use device-managed registration API iio: light: cm3323: Use device-managed APIs iio: light: si1145: Use device-managed APIs iio: tsl2772: Use devm_add_action_or_reset iio: tsl2772: Use devm_add_action_or_reset for tsl2772_chip_off iio: tsl2772: Use devm_iio_device_register iio: tsl2772: Use regulator_bulk_() APIs Denis Ciocca (17): iio:common:st_sensors: add st_sensors_get_settings_index() helper function iio:accel: introduce st_accel_get_settings() function iio:gyro: introduce st_gyro_get_settings() function iio:magn: introduce st_magn_get_settings() function iio:pressure: introduce st_press_get_settings() function iio:accel: device settings are set immediately during probe iio:gyro: device settings are set immediately during probe iio:magn: device settings are set immediately during probe iio:pressure: device settings are set immediately during probe iio: move 3-wire spi initialization to st_sensors_spi iio: make st_sensors drivers use regmap iio:accel: preenable/postenable/predisable fixup for ST accel buffer iio:gyro: preenable/postenable/predisable fixup for ST gyro buffer iio:magn: preenable/postenable/predisable fixup for ST magn buffer iio:pressure: preenable/postenable/predisable fixup for ST press buffer iio: remove get_irq_data_ready() function pointer and use IRQ number directly iio:st_sensors: remove buffer allocation at each buffer enable Fabien Lahoudere (2): iio: common: cros_ec_sensors: determine protocol version iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs Fabrice Gasnier (2): dt-bindings: iio: adc: stm32: add analog switches supply control iio: adc: stm32-adc: add analog switches supply control Fuqian Huang (3): iio: adc: sc27xx: Introduce local variable 'struct device *dev' iio: adc: sc27xx: Replace devm_add_action() followed by failure action with devm_add_action_or_reset() iio: imu: mpu6050: Replace devm_add_action() followed by failure action with devm_add_action_or_reset() Geert Uytterhoeven (1): Documentation: ABI: iio: Add missing newline at end of file Gwendal Grignou (6): iio: cros_ec: Add calibscale for 3d MEMS iio: cros_ec: Remove replacing error code with -EIO iio: cros_ec: Add sign vector in core for backward compatibility iio: cros_ec_accel_legacy: Fix incorrect channel setting iio: cros_ec_accel_legacy: Use cros_ec_sensors_core iio: cros_ec_accel_legacy: Add support for veyron-minnie Jean-Baptiste Maneyrol (1): iio: imu: inv_mpu6050: be more explicit on supported chips Jonathan Cameron (1): Merge tag 'tags/i3c/export-i3c_device_match_id' into HEAD Linus Walleij (1): iio: document bindings for mounting matrices Lorenzo Bianconi (8): iio: imu: st_lsm6dsx: add support to LSM6DS3TR-C dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds3tr-c device bindings iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings iio: imu: st_lsm6dsx: move fs_table in st_lsm6dsx_sensor_settings iio: imu: st_lsm6dsx: inline output acc/gyro output regs iio: imu: st_lsm6dsx: move iio chan definitions in st_lsm6dsx_sensor_settings iio: imu: st_lsm6dsx: add support to ISM330DHCX dt-bindings: iio: imu: st_lsm6dsx: add ism330dhcx device bindings Luca Weiss (3): dt-bindings: Add vendor prefix for sensortek dt-bindings: iio: light: add stk33xx iio: light: stk3310: Add device tree support Martin Kaiser (2): iio: potentiometer: add a driver for Maxim 5432-5435 dt-bindings: iio: potentiometer: add max5432.yaml binding Martin Kepplinger (1): iio: imu: st_lsm6dsx: make IIO_CHAN_INFO_SCALE shared by type Martyn Welch (2): dt-bindings: Add binding document for NOA1305 iio: light: noa1305: Add support for NOA1305 Sean Nyekjaer (1): iio: imu: st_lsm6dsx: flip irq return logic Stephen Boyd (1): iio: Remove dev_err() usage after platform_get_irq() Tomasz Duszynski (2): dt-bindings: iio: chemical: pms7003: convert bindings to yaml MAINTAINERS: add entry for plantower pms7003 driver Vitor Soares (2): i3c: move i3c_device_match_id to device.c and export it iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR Wolfram Sang (3): iio: light: cm36651: convert to i2c_new_dummy_device iio: light: veml6070: convert to i2c_new_dummy_device iio: pressure: hp03: convert to i2c_new_dummy_device .../ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 | 2 +- .../ABI/testing/sysfs-bus-iio-timer-stm32 | 23 - .../devicetree/bindings/iio/adc/st,stm32-adc.txt | 6 + .../bindings/iio/chemical/plantower,pms7003.txt | 26 -- .../bindings/iio/chemical/plantower,pms7003.yaml | 51 +++ .../devicetree/bindings/iio/imu/adi,adis16460.yaml | 53 +++ .../devicetree/bindings/iio/imu/st_lsm6dsx.txt | 2 + .../devicetree/bindings/iio/light/noa1305.yaml | 44 ++ .../devicetree/bindings/iio/light/stk33xx.yaml | 49 +++ .../devicetree/bindings/iio/mount-matrix.txt | 203 +++++++++ .../bindings/iio/potentiometer/max5432.yaml | 44 ++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 14 + drivers/counter/ftm-quaddec.c | 30 +- drivers/i3c/device.c | 53 +++ drivers/i3c/master.c | 45 -- drivers/iio/accel/Kconfig | 4 +- drivers/iio/accel/cros_ec_accel_legacy.c | 353 ++++----------- drivers/iio/accel/mxc4005.c | 40 +- drivers/iio/accel/sca3000.c | 2 +- drivers/iio/accel/st_accel.h | 1 + drivers/iio/accel/st_accel_buffer.c | 44 +- drivers/iio/accel/st_accel_core.c | 32 +- drivers/iio/accel/st_accel_i2c.c | 23 +- drivers/iio/accel/st_accel_spi.c | 20 +- drivers/iio/adc/ad7606.c | 91 ++-- drivers/iio/adc/ad7606.h | 57 ++- drivers/iio/adc/ad7606_par.c | 4 +- drivers/iio/adc/ad7606_spi.c | 175 +++++++- drivers/iio/adc/at91_adc.c | 4 +- drivers/iio/adc/axp288_adc.c | 4 +- drivers/iio/adc/bcm_iproc_adc.c | 7 +- drivers/iio/adc/da9150-gpadc.c | 4 +- drivers/iio/adc/envelope-detector.c | 5 +- drivers/iio/adc/exynos_adc.c | 4 +- drivers/iio/adc/fsl-imx25-gcq.c | 1 - drivers/iio/adc/hi8435.c | 34 +- drivers/iio/adc/imx7d_adc.c | 4 +- drivers/iio/adc/lpc32xx_adc.c | 4 +- drivers/iio/adc/npcm_adc.c | 1 - drivers/iio/adc/rockchip_saradc.c | 4 +- drivers/iio/adc/sc27xx_adc.c | 45 +- drivers/iio/adc/spear_adc.c | 1 - drivers/iio/adc/stm32-adc-core.c | 194 +++++++- drivers/iio/adc/stm32-adc.c | 4 +- drivers/iio/adc/stm32-dfsdm-adc.c | 5 +- drivers/iio/adc/sun4i-gpadc-iio.c | 4 +- drivers/iio/adc/twl6030-gpadc.c | 4 +- drivers/iio/adc/vf610_adc.c | 4 +- .../iio/common/cros_ec_sensors/cros_ec_sensors.c | 54 ++- .../common/cros_ec_sensors/cros_ec_sensors_core.c | 150 ++++++- drivers/iio/common/st_sensors/st_sensors_buffer.c | 10 +- drivers/iio/common/st_sensors/st_sensors_core.c | 118 ++--- drivers/iio/common/st_sensors/st_sensors_i2c.c | 82 ++-- drivers/iio/common/st_sensors/st_sensors_spi.c | 148 +++---- drivers/iio/common/st_sensors/st_sensors_trigger.c | 31 +- drivers/iio/gyro/st_gyro.h | 1 + drivers/iio/gyro/st_gyro_buffer.c | 48 +- drivers/iio/gyro/st_gyro_core.c | 32 +- drivers/iio/gyro/st_gyro_i2c.c | 22 +- drivers/iio/gyro/st_gyro_spi.c | 20 +- drivers/iio/humidity/am2315.c | 24 +- drivers/iio/humidity/hdc100x.c | 19 +- drivers/iio/imu/Kconfig | 12 + drivers/iio/imu/Makefile | 1 + drivers/iio/imu/adis.c | 12 + drivers/iio/imu/adis16460.c | 489 +++++++++++++++++++++ drivers/iio/imu/inv_mpu6050/Kconfig | 10 +- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 3 +- drivers/iio/imu/st_lsm6dsx/Kconfig | 11 +- drivers/iio/imu/st_lsm6dsx/Makefile | 1 + drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 17 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 17 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 483 ++++++++++++++++---- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 10 + drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 57 +++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 10 + drivers/iio/light/Kconfig | 11 + drivers/iio/light/Makefile | 1 + drivers/iio/light/apds9960.c | 2 +- drivers/iio/light/cm3323.c | 33 +- drivers/iio/light/cm36651.c | 12 +- drivers/iio/light/cros_ec_light_prox.c | 51 ++- drivers/iio/light/noa1305.c | 312 +++++++++++++ drivers/iio/light/si1145.c | 42 +- drivers/iio/light/stk3310.c | 9 + drivers/iio/light/tsl2772.c | 124 ++---- drivers/iio/light/veml6070.c | 6 +- drivers/iio/magnetometer/mmc35240.c | 4 +- drivers/iio/magnetometer/st_magn.h | 1 + drivers/iio/magnetometer/st_magn_buffer.c | 31 +- drivers/iio/magnetometer/st_magn_core.c | 32 +- drivers/iio/magnetometer/st_magn_i2c.c | 22 +- drivers/iio/magnetometer/st_magn_spi.c | 20 +- drivers/iio/potentiometer/Kconfig | 11 + drivers/iio/potentiometer/Makefile | 1 + drivers/iio/potentiometer/max5432.c | 135 ++++++ drivers/iio/pressure/cros_ec_baro.c | 19 +- drivers/iio/pressure/hp03.c | 6 +- drivers/iio/pressure/st_pressure.h | 1 + drivers/iio/pressure/st_pressure_buffer.c | 39 +- drivers/iio/pressure/st_pressure_core.c | 32 +- drivers/iio/pressure/st_pressure_i2c.c | 31 +- drivers/iio/pressure/st_pressure_spi.c | 22 +- drivers/iio/temperature/maxim_thermocouple.c | 25 +- drivers/iio/trigger/stm32-timer-trigger.c | 84 ---- drivers/staging/iio/adc/ad7192.c | 12 + drivers/staging/iio/resolver/ad2s1210.c | 12 +- include/linux/i3c/device.h | 4 + include/linux/iio/common/cros_ec_sensors_core.h | 28 +- include/linux/iio/common/st_sensors.h | 66 +-- include/linux/iio/common/st_sensors_i2c.h | 4 +- include/linux/iio/common/st_sensors_spi.h | 4 +- include/linux/iio/imu/adis.h | 2 + 114 files changed, 3455 insertions(+), 1518 deletions(-) delete mode 100644 Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt create mode 100644 Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml create mode 100644 Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml create mode 100644 Documentation/devicetree/bindings/iio/light/noa1305.yaml create mode 100644 Documentation/devicetree/bindings/iio/light/stk33xx.yaml create mode 100644 Documentation/devicetree/bindings/iio/mount-matrix.txt create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml create mode 100644 drivers/iio/imu/adis16460.c create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c create mode 100644 drivers/iio/light/noa1305.c create mode 100644 drivers/iio/potentiometer/max5432.c