diff mbox series

[v5,02/18] dt-bindings: thermal: add binding document for h6 thermal controller

Message ID 20190810052829.6032-3-tiny.windzz@gmail.com (mailing list archive)
State New, archived
Headers show
Series add thermal driver for h6 | expand

Commit Message

Yangtao Li Aug. 10, 2019, 5:28 a.m. UTC
This patch adds binding document for allwinner h6 thermal controller.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
---
 .../bindings/thermal/sun8i-thermal.yaml       | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml

Comments

Maxime Ripard Aug. 12, 2019, 8:56 a.m. UTC | #1
On Sat, Aug 10, 2019 at 05:28:13AM +0000, Yangtao Li wrote:
> This patch adds binding document for allwinner h6 thermal controller.
>
> Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
> ---
>  .../bindings/thermal/sun8i-thermal.yaml       | 79 +++++++++++++++++++
>  1 file changed, 79 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
>
> diff --git a/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml b/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
> new file mode 100644
> index 000000000000..e0973199ba3c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml

We've used so far for the schemas the first compatible to introduce
that controller as the filename, we should be consistent here. In that
case that would be allwinner,sun8i-a23-ths.yaml

> @@ -0,0 +1,79 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/sun8i-thermal.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Allwinner SUN8I Thermal Controller Device Tree Bindings
> +
> +maintainers:
> +  - Yangtao Li <tiny.windzz@gmail.com>
> +
> +description: |-
> +  This describes the device tree binding for the Allwinner thermal
> +  controller which measures the on-SoC temperatures.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - allwinner,sun50i-h6-ths
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    const: bus
> +
> +  "#thermal-sensor-cells":
> +    const: 1
> +
> +  nvmem-cells:

You need a maxItems here too

> +    description: ths calibrate data

What about something like this:

Calibration data for the thermal sensor

> +
> +  nvmem-cell-names:
> +    const: calib

I'm not sure we need a abbreviation here, calibration would be more
explicit

> +
> +required:
> +  - compatible
> +  - reg
> +  - reset
> +  - clocks
> +  - clock-names
> +  - interrupts
> +  - "#thermal-sensor-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    ths: ths@5070400 {
> +        compatible = "allwinner,sun50i-h6-ths";
> +        reg = <0x05070400 0x100>;
> +        clocks = <&ccu CLK_BUS_THS>;
> +        clock-names = "bus";
> +        resets = <&ccu RST_BUS_THS>;
> +        interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;

Those examples won't compile.

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Yangtao Li Aug. 12, 2019, 11:40 p.m. UTC | #2
On Mon, Aug 12, 2019 at 4:56 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> On Sat, Aug 10, 2019 at 05:28:13AM +0000, Yangtao Li wrote:
> > This patch adds binding document for allwinner h6 thermal controller.
> >
> > Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
> > ---
> >  .../bindings/thermal/sun8i-thermal.yaml       | 79 +++++++++++++++++++
> >  1 file changed, 79 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml b/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
> > new file mode 100644
> > index 000000000000..e0973199ba3c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
>
> We've used so far for the schemas the first compatible to introduce
> that controller as the filename, we should be consistent here. In that
> case that would be allwinner,sun8i-a23-ths.yaml
>
> > @@ -0,0 +1,79 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/thermal/sun8i-thermal.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Allwinner SUN8I Thermal Controller Device Tree Bindings
> > +
> > +maintainers:
> > +  - Yangtao Li <tiny.windzz@gmail.com>
> > +
> > +description: |-
> > +  This describes the device tree binding for the Allwinner thermal
> > +  controller which measures the on-SoC temperatures.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - allwinner,sun50i-h6-ths
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  resets:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  clock-names:
> > +    const: bus
> > +
> > +  "#thermal-sensor-cells":
> > +    const: 1
> > +
> > +  nvmem-cells:
>
> You need a maxItems here too
>
> > +    description: ths calibrate data
>
> What about something like this:
>
> Calibration data for the thermal sensor
>
> > +
> > +  nvmem-cell-names:
> > +    const: calib
>
> I'm not sure we need a abbreviation here, calibration would be more
> explicit
>
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - reset
> > +  - clocks
> > +  - clock-names
> > +  - interrupts
> > +  - "#thermal-sensor-cells"
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    ths: ths@5070400 {
> > +        compatible = "allwinner,sun50i-h6-ths";
> > +        reg = <0x05070400 0x100>;
> > +        clocks = <&ccu CLK_BUS_THS>;
> > +        clock-names = "bus";
> > +        resets = <&ccu RST_BUS_THS>;
> > +        interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
>
> Those examples won't compile.

Emmm, I have some questions about this.
I added this information and it can be compiled.

Yours,
Yangtao

>
> Maxime
>
> --
> Maxime Ripard, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
Maxime Ripard Aug. 16, 2019, 9:47 a.m. UTC | #3
On Tue, Aug 13, 2019 at 07:40:44AM +0800, Frank Lee wrote:
> On Mon, Aug 12, 2019 at 4:56 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> >
> > On Sat, Aug 10, 2019 at 05:28:13AM +0000, Yangtao Li wrote:
> > > This patch adds binding document for allwinner h6 thermal controller.
> > >
> > > Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
> > > ---
> > >  .../bindings/thermal/sun8i-thermal.yaml       | 79 +++++++++++++++++++
> > >  1 file changed, 79 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml b/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
> > > new file mode 100644
> > > index 000000000000..e0973199ba3c
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
> >
> > We've used so far for the schemas the first compatible to introduce
> > that controller as the filename, we should be consistent here. In that
> > case that would be allwinner,sun8i-a23-ths.yaml
> >
> > > @@ -0,0 +1,79 @@
> > > +# SPDX-License-Identifier: GPL-2.0
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/thermal/sun8i-thermal.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Allwinner SUN8I Thermal Controller Device Tree Bindings
> > > +
> > > +maintainers:
> > > +  - Yangtao Li <tiny.windzz@gmail.com>
> > > +
> > > +description: |-
> > > +  This describes the device tree binding for the Allwinner thermal
> > > +  controller which measures the on-SoC temperatures.
> > > +
> > > +properties:
> > > +  compatible:
> > > +    enum:
> > > +      - allwinner,sun50i-h6-ths
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  interrupts:
> > > +    maxItems: 1
> > > +
> > > +  resets:
> > > +    maxItems: 1
> > > +
> > > +  clocks:
> > > +    maxItems: 1
> > > +
> > > +  clock-names:
> > > +    const: bus
> > > +
> > > +  "#thermal-sensor-cells":
> > > +    const: 1
> > > +
> > > +  nvmem-cells:
> >
> > You need a maxItems here too
> >
> > > +    description: ths calibrate data
> >
> > What about something like this:
> >
> > Calibration data for the thermal sensor
> >
> > > +
> > > +  nvmem-cell-names:
> > > +    const: calib
> >
> > I'm not sure we need a abbreviation here, calibration would be more
> > explicit
> >
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - reset
> > > +  - clocks
> > > +  - clock-names
> > > +  - interrupts
> > > +  - "#thermal-sensor-cells"
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > +  - |
> > > +    ths: ths@5070400 {
> > > +        compatible = "allwinner,sun50i-h6-ths";
> > > +        reg = <0x05070400 0x100>;
> > > +        clocks = <&ccu CLK_BUS_THS>;
> > > +        clock-names = "bus";
> > > +        resets = <&ccu RST_BUS_THS>;
> > > +        interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> >
> > Those examples won't compile.
>
> Emmm, I have some questions about this.
> I added this information and it can be compiled.

With your patch applied,

$ ARCH=arm DT_SCHEMA_FILES=Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml make -j4 dt_binding_check
  CHKDT   Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
  DTC     Documentation/devicetree/bindings/thermal/sun8i-thermal.example.dt.yaml
Error: Documentation/devicetree/bindings/thermal/sun8i-thermal.example.dts:20.28-29 syntax error
FATAL ERROR: Unable to parse input tree
make[2]: *** [scripts/Makefile.lib:299: Documentation/devicetree/bindings/thermal/sun8i-thermal.example.dt.yaml] Error 1
make[1]: *** [/home/max/Work/src/linux/Makefile:1286: dt_binding_check] Error 2
make: *** [/home/max/Work/src/linux/Makefile:179: sub-make] Error 2

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml b/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
new file mode 100644
index 000000000000..e0973199ba3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
@@ -0,0 +1,79 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/sun8i-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner SUN8I Thermal Controller Device Tree Bindings
+
+maintainers:
+  - Yangtao Li <tiny.windzz@gmail.com>
+
+description: |-
+  This describes the device tree binding for the Allwinner thermal
+  controller which measures the on-SoC temperatures.
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun50i-h6-ths
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: bus
+
+  "#thermal-sensor-cells":
+    const: 1
+
+  nvmem-cells:
+    description: ths calibrate data
+
+  nvmem-cell-names:
+    const: calib
+
+required:
+  - compatible
+  - reg
+  - reset
+  - clocks
+  - clock-names
+  - interrupts
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    ths: ths@5070400 {
+        compatible = "allwinner,sun50i-h6-ths";
+        reg = <0x05070400 0x100>;
+        clocks = <&ccu CLK_BUS_THS>;
+        clock-names = "bus";
+        resets = <&ccu RST_BUS_THS>;
+        interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+        nvmem-cells = <&tsen_calib>;
+        nvmem-cell-names = "calib";
+        #thermal-sensor-cells = <1>;
+    };
+
+    sid: sid@3006000 {
+        compatible = "allwinner,sun50i-h6-sid";
+        reg = <0x03006000 0x400>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        tsen_calib: calib@14 {
+                reg = <0x14 6>;
+        };
+    };
+...