diff mbox series

bcma: fix incorrect update of BCMA_CORE_PCI_MDIO_DATA

Message ID 20190822133524.6274-1-colin.king@canonical.com (mailing list archive)
State Changes Requested
Delegated to: Kalle Valo
Headers show
Series bcma: fix incorrect update of BCMA_CORE_PCI_MDIO_DATA | expand

Commit Message

Colin King Aug. 22, 2019, 1:35 p.m. UTC
From: Colin Ian King <colin.king@canonical.com>

An earlier commit re-worked the setting of the bitmask and is now
assigning v with some bit flags rather than bitwise or-ing them
into v, consequently the earlier bit-settings of v are being lost.
Fix this by replacing an assignment with the bitwise or instead.

Addresses-Coverity: ("Unused value")
Fixes: 2be25cac8402 ("bcma: add constants for PCI and use them")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
 drivers/bcma/driver_pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Larry Finger Aug. 22, 2019, 4:03 p.m. UTC | #1
On 8/22/19 8:35 AM, Colin King wrote:
> From: Colin Ian King <colin.king@canonical.com>
> 
> An earlier commit re-worked the setting of the bitmask and is now
> assigning v with some bit flags rather than bitwise or-ing them
> into v, consequently the earlier bit-settings of v are being lost.
> Fix this by replacing an assignment with the bitwise or instead.
> 
> Addresses-Coverity: ("Unused value")
> Fixes: 2be25cac8402 ("bcma: add constants for PCI and use them")
> Signed-off-by: Colin Ian King <colin.king@canonical.com>
> ---
>   drivers/bcma/driver_pci.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
> index f499a469e66d..d219ee947c07 100644
> --- a/drivers/bcma/driver_pci.c
> +++ b/drivers/bcma/driver_pci.c
> @@ -78,7 +78,7 @@ static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u16 device, u8 address)
>   		v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD);
>   	}
>   
> -	v = BCMA_CORE_PCI_MDIODATA_START;
> +	v |= BCMA_CORE_PCI_MDIODATA_START;
>   	v |= BCMA_CORE_PCI_MDIODATA_READ;
>   	v |= BCMA_CORE_PCI_MDIODATA_TA;

I'm not sure the "Fixes" attribute is correct.

The changes for this section in commit 2be25cac8402 are

-       v = (1 << 30); /* Start of Transaction */
-       v |= (1 << 28); /* Write Transaction */
-       v |= (1 << 17); /* Turnaround */
-       v |= (0x1F << 18);
+       v = BCMA_CORE_PCI_MDIODATA_START;
+       v |= BCMA_CORE_PCI_MDIODATA_WRITE;
+       v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR <<
+             BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF);
+       v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR <<
+             BCMA_CORE_PCI_MDIODATA_REGADDR_SHF);
+       v |= BCMA_CORE_PCI_MDIODATA_TA;

Because the code has done quite a bit of work on v just above this section, I 
agree that this is likely an error, but that error happened in an earlier 
commit. Thus 2be25cac8402 did not introduce the error, merely copied it.

Has this change been tested?

Larry
Colin King Aug. 22, 2019, 4:11 p.m. UTC | #2
On 22/08/2019 17:03, Larry Finger wrote:
> On 8/22/19 8:35 AM, Colin King wrote:
>> From: Colin Ian King <colin.king@canonical.com>
>>
>> An earlier commit re-worked the setting of the bitmask and is now
>> assigning v with some bit flags rather than bitwise or-ing them
>> into v, consequently the earlier bit-settings of v are being lost.
>> Fix this by replacing an assignment with the bitwise or instead.
>>
>> Addresses-Coverity: ("Unused value")
>> Fixes: 2be25cac8402 ("bcma: add constants for PCI and use them")
>> Signed-off-by: Colin Ian King <colin.king@canonical.com>
>> ---
>>   drivers/bcma/driver_pci.c | 2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
>> index f499a469e66d..d219ee947c07 100644
>> --- a/drivers/bcma/driver_pci.c
>> +++ b/drivers/bcma/driver_pci.c
>> @@ -78,7 +78,7 @@ static u16 bcma_pcie_mdio_read(struct bcma_drv_pci
>> *pc, u16 device, u8 address)
>>           v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD);
>>       }
>>   -    v = BCMA_CORE_PCI_MDIODATA_START;
>> +    v |= BCMA_CORE_PCI_MDIODATA_START;
>>       v |= BCMA_CORE_PCI_MDIODATA_READ;
>>       v |= BCMA_CORE_PCI_MDIODATA_TA;
> 
> I'm not sure the "Fixes" attribute is correct.
> 
> The changes for this section in commit 2be25cac8402 are
> 
> -       v = (1 << 30); /* Start of Transaction */
> -       v |= (1 << 28); /* Write Transaction */
> -       v |= (1 << 17); /* Turnaround */
> -       v |= (0x1F << 18);
> +       v = BCMA_CORE_PCI_MDIODATA_START;
> +       v |= BCMA_CORE_PCI_MDIODATA_WRITE;
> +       v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR <<
> +             BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF);
> +       v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR <<
> +             BCMA_CORE_PCI_MDIODATA_REGADDR_SHF);
> +       v |= BCMA_CORE_PCI_MDIODATA_TA;
> 
> Because the code has done quite a bit of work on v just above this
> section, I agree that this is likely an error, but that error happened
> in an earlier commit. Thus 2be25cac8402 did not introduce the error,
> merely copied it.

Ugh, this goes back further. I didn't spot that. I'm less confident of
what the correct settings should be now.

> 
> Has this change been tested?

Afraid not, I don't have the H/W.

> 
> Larry
Larry Finger Aug. 22, 2019, 4:38 p.m. UTC | #3
On 8/22/19 11:11 AM, Colin Ian King wrote:
> On 22/08/2019 17:03, Larry Finger wrote:
>> On 8/22/19 8:35 AM, Colin King wrote:
>>> From: Colin Ian King <colin.king@canonical.com>
>>>
>>> An earlier commit re-worked the setting of the bitmask and is now
>>> assigning v with some bit flags rather than bitwise or-ing them
>>> into v, consequently the earlier bit-settings of v are being lost.
>>> Fix this by replacing an assignment with the bitwise or instead.
>>>
>>> Addresses-Coverity: ("Unused value")
>>> Fixes: 2be25cac8402 ("bcma: add constants for PCI and use them")
>>> Signed-off-by: Colin Ian King <colin.king@canonical.com>
>>> ---
>>>    drivers/bcma/driver_pci.c | 2 +-
>>>    1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
>>> index f499a469e66d..d219ee947c07 100644
>>> --- a/drivers/bcma/driver_pci.c
>>> +++ b/drivers/bcma/driver_pci.c
>>> @@ -78,7 +78,7 @@ static u16 bcma_pcie_mdio_read(struct bcma_drv_pci
>>> *pc, u16 device, u8 address)
>>>            v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD);
>>>        }
>>>    -    v = BCMA_CORE_PCI_MDIODATA_START;
>>> +    v |= BCMA_CORE_PCI_MDIODATA_START;
>>>        v |= BCMA_CORE_PCI_MDIODATA_READ;
>>>        v |= BCMA_CORE_PCI_MDIODATA_TA;
>>
>> I'm not sure the "Fixes" attribute is correct.
>>
>> The changes for this section in commit 2be25cac8402 are
>>
>> -       v = (1 << 30); /* Start of Transaction */
>> -       v |= (1 << 28); /* Write Transaction */
>> -       v |= (1 << 17); /* Turnaround */
>> -       v |= (0x1F << 18);
>> +       v = BCMA_CORE_PCI_MDIODATA_START;
>> +       v |= BCMA_CORE_PCI_MDIODATA_WRITE;
>> +       v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR <<
>> +             BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF);
>> +       v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR <<
>> +             BCMA_CORE_PCI_MDIODATA_REGADDR_SHF);
>> +       v |= BCMA_CORE_PCI_MDIODATA_TA;
>>
>> Because the code has done quite a bit of work on v just above this
>> section, I agree that this is likely an error, but that error happened
>> in an earlier commit. Thus 2be25cac8402 did not introduce the error,
>> merely copied it.
> 
> Ugh, this goes back further. I didn't spot that. I'm less confident of
> what the correct settings should be now.
> 
>>
>> Has this change been tested?
> 
> Afraid not, I don't have the H/W.

I admit that I looked at this only because I found it hard to believe that the 
collective wisdom of the list would have missed the usage of "=" instead of 
"|=". At least that test was passed. :)

Larry
Johannes Berg Aug. 22, 2019, 4:55 p.m. UTC | #4
On Thu, 2019-08-22 at 14:35 +0100, Colin King wrote:
> From: Colin Ian King <colin.king@canonical.com>
> 
> An earlier commit re-worked the setting of the bitmask and is now
> assigning v with some bit flags rather than bitwise or-ing them
> into v, consequently the earlier bit-settings of v are being lost.
> Fix this by replacing an assignment with the bitwise or instead.
> 
> Addresses-Coverity: ("Unused value")
> Fixes: 2be25cac8402 ("bcma: add constants for PCI and use them")
> Signed-off-by: Colin Ian King <colin.king@canonical.com>
> ---
>  drivers/bcma/driver_pci.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
> index f499a469e66d..d219ee947c07 100644
> --- a/drivers/bcma/driver_pci.c
> +++ b/drivers/bcma/driver_pci.c
> @@ -78,7 +78,7 @@ static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u16 device, u8 address)
>  		v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD);
>  	}
>  
> -	v = BCMA_CORE_PCI_MDIODATA_START;
> +	v |= BCMA_CORE_PCI_MDIODATA_START;

The same bug/issue is in bcma_pcie_mdio_write() btw.

It *seems* correct to me - otherwise the "address" parameter to the
function is entirely unused, which can't really be right.

There are only two code paths that ever get here:
 * bcma_pcicore_serdes_workaround
 * bcma_core_pci_power_save

The register at 0 is BCMA_CORE_PCI_CTL, which only has a few bits so
even bad values written there by accident might not hurt much ...

So it seems possible that it was just always broken.

johannes
Rafał Miłecki Aug. 25, 2019, 7:59 p.m. UTC | #5
On Thu, 22 Aug 2019 at 18:11, Colin Ian King <colin.king@canonical.com> wrote:
> On 22/08/2019 17:03, Larry Finger wrote:
> > On 8/22/19 8:35 AM, Colin King wrote:
> >> From: Colin Ian King <colin.king@canonical.com>
> >>
> >> An earlier commit re-worked the setting of the bitmask and is now
> >> assigning v with some bit flags rather than bitwise or-ing them
> >> into v, consequently the earlier bit-settings of v are being lost.
> >> Fix this by replacing an assignment with the bitwise or instead.
> >>
> >> Addresses-Coverity: ("Unused value")
> >> Fixes: 2be25cac8402 ("bcma: add constants for PCI and use them")
> >> Signed-off-by: Colin Ian King <colin.king@canonical.com>
> >> ---
> >>   drivers/bcma/driver_pci.c | 2 +-
> >>   1 file changed, 1 insertion(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
> >> index f499a469e66d..d219ee947c07 100644
> >> --- a/drivers/bcma/driver_pci.c
> >> +++ b/drivers/bcma/driver_pci.c
> >> @@ -78,7 +78,7 @@ static u16 bcma_pcie_mdio_read(struct bcma_drv_pci
> >> *pc, u16 device, u8 address)
> >>           v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD);
> >>       }
> >>   -    v = BCMA_CORE_PCI_MDIODATA_START;
> >> +    v |= BCMA_CORE_PCI_MDIODATA_START;
> >>       v |= BCMA_CORE_PCI_MDIODATA_READ;
> >>       v |= BCMA_CORE_PCI_MDIODATA_TA;
> >
> > I'm not sure the "Fixes" attribute is correct.
> >
> > The changes for this section in commit 2be25cac8402 are
> >
> > -       v = (1 << 30); /* Start of Transaction */
> > -       v |= (1 << 28); /* Write Transaction */
> > -       v |= (1 << 17); /* Turnaround */
> > -       v |= (0x1F << 18);
> > +       v = BCMA_CORE_PCI_MDIODATA_START;
> > +       v |= BCMA_CORE_PCI_MDIODATA_WRITE;
> > +       v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR <<
> > +             BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF);
> > +       v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR <<
> > +             BCMA_CORE_PCI_MDIODATA_REGADDR_SHF);
> > +       v |= BCMA_CORE_PCI_MDIODATA_TA;
> >
> > Because the code has done quite a bit of work on v just above this
> > section, I agree that this is likely an error, but that error happened
> > in an earlier commit. Thus 2be25cac8402 did not introduce the error,
> > merely copied it.
>
> Ugh, this goes back further. I didn't spot that. I'm less confident of
> what the correct settings should be now.
>
> >
> > Has this change been tested?
>
> Afraid not, I don't have the H/W.

Please send V2 with updated commit message (Fixes tag) +
bcma_pcie_mdio_write fixed. I'll try to test it.
Colin King Aug. 27, 2019, 7:58 a.m. UTC | #6
On 22/08/2019 17:38, Larry Finger wrote:
> On 8/22/19 11:11 AM, Colin Ian King wrote:
>> On 22/08/2019 17:03, Larry Finger wrote:
>>> On 8/22/19 8:35 AM, Colin King wrote:
>>>> From: Colin Ian King <colin.king@canonical.com>
>>>>
>>>> An earlier commit re-worked the setting of the bitmask and is now
>>>> assigning v with some bit flags rather than bitwise or-ing them
>>>> into v, consequently the earlier bit-settings of v are being lost.
>>>> Fix this by replacing an assignment with the bitwise or instead.
>>>>
>>>> Addresses-Coverity: ("Unused value")
>>>> Fixes: 2be25cac8402 ("bcma: add constants for PCI and use them")
>>>> Signed-off-by: Colin Ian King <colin.king@canonical.com>
>>>> ---
>>>>    drivers/bcma/driver_pci.c | 2 +-
>>>>    1 file changed, 1 insertion(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
>>>> index f499a469e66d..d219ee947c07 100644
>>>> --- a/drivers/bcma/driver_pci.c
>>>> +++ b/drivers/bcma/driver_pci.c
>>>> @@ -78,7 +78,7 @@ static u16 bcma_pcie_mdio_read(struct bcma_drv_pci
>>>> *pc, u16 device, u8 address)
>>>>            v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD);
>>>>        }
>>>>    -    v = BCMA_CORE_PCI_MDIODATA_START;
>>>> +    v |= BCMA_CORE_PCI_MDIODATA_START;
>>>>        v |= BCMA_CORE_PCI_MDIODATA_READ;
>>>>        v |= BCMA_CORE_PCI_MDIODATA_TA;
>>>
>>> I'm not sure the "Fixes" attribute is correct.
>>>
>>> The changes for this section in commit 2be25cac8402 are
>>>
>>> -       v = (1 << 30); /* Start of Transaction */
>>> -       v |= (1 << 28); /* Write Transaction */
>>> -       v |= (1 << 17); /* Turnaround */
>>> -       v |= (0x1F << 18);
>>> +       v = BCMA_CORE_PCI_MDIODATA_START;
>>> +       v |= BCMA_CORE_PCI_MDIODATA_WRITE;
>>> +       v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR <<
>>> +             BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF);
>>> +       v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR <<
>>> +             BCMA_CORE_PCI_MDIODATA_REGADDR_SHF);
>>> +       v |= BCMA_CORE_PCI_MDIODATA_TA;
>>>
>>> Because the code has done quite a bit of work on v just above this
>>> section, I agree that this is likely an error, but that error happened
>>> in an earlier commit. Thus 2be25cac8402 did not introduce the error,
>>> merely copied it.

I did a second look at Larry's comments above and realized the code he
is referring to is in bcma_pcie_mdio_set_phy which is OK

Instead, the code I'm fixing is in bcma_pcie_mdio_read, which was broken
by commit 2be25cac8402fab56bb51166f464d1b420bcf744

        if (pc->core->id.rev >= 10) {
                max_retries = 200;
                bcma_pcie_mdio_set_phy(pc, device);
+               v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR <<
+                    BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF);
+               v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF);
+       } else {
+               v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD);
+               v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD);
        }

-       v = (1 << 30); /* Start of Transaction */
-       v |= (1 << 29); /* Read Transaction */
-       v |= (1 << 17); /* Turnaround */
-       if (pc->core->id.rev < 10)
-               v |= (u32)device << 22;
-       v |= (u32)address << 18;
-       pcicore_write32(pc, mdio_data, v);
+       v = BCMA_CORE_PCI_MDIODATA_START;
+       v |= BCMA_CORE_PCI_MDIODATA_READ;
+       v |= BCMA_CORE_PCI_MDIODATA_TA;
+
+       pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v);


>>
>> Ugh, this goes back further. I didn't spot that. I'm less confident of
>> what the correct settings should be now.
>>
>>>
>>> Has this change been tested?
>>
>> Afraid not, I don't have the H/W.
> 
> I admit that I looked at this only because I found it hard to believe
> that the collective wisdom of the list would have missed the usage of
> "=" instead of "|=". At least that test was passed. :)

Maybe not after all :-)

> 
> Larry
> 

I'll send a V2 with the write fix, and the same fixes commit sha
diff mbox series

Patch

diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
index f499a469e66d..d219ee947c07 100644
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -78,7 +78,7 @@  static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u16 device, u8 address)
 		v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD);
 	}
 
-	v = BCMA_CORE_PCI_MDIODATA_START;
+	v |= BCMA_CORE_PCI_MDIODATA_START;
 	v |= BCMA_CORE_PCI_MDIODATA_READ;
 	v |= BCMA_CORE_PCI_MDIODATA_TA;