| Message ID | 20190823134516.27559-1-opensource@vdorst.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | net: ethernet: mediatek: convert to PHYLINK | expand |
tested on bpi-r2 (mt7623/mt7530) and bpi-r64 (mt7622/rtl8367) as reported to rene directly rx-path needs some rework because current rx-speed on bpi-r2 is 865 Mbits/sec instead of ~940 Mbits/sec Tested-by: Frank Wunderlich <frank-w@public-files.de> regards Frank > Gesendet: Freitag, 23. August 2019 um 15:45 Uhr > Von: "René van Dorst" <opensource@vdorst.com> > An: "John Crispin" <john@phrozen.org>, "Sean Wang" <sean.wang@mediatek.com>, "Nelson Chang" <nelson.chang@mediatek.com>, "David S . Miller" <davem@davemloft.net>, "Matthias Brugger" <matthias.bgg@gmail.com> > Cc: netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, linux-mips@vger.kernel.org, "Russell King" <linux@armlinux.org.uk>, "Frank Wunderlich" <frank-w@public-files.de>, "Stefan Roese" <sr@denx.de>, "René van Dorst" <opensource@vdorst.com> > Betreff: [PATCH net-next v3 0/3] net: ethernet: mediatek: convert to PHYLINK > > These patches converts mediatek driver to PHYLINK API. > > v2->v3: > * Phylink improvements and clean-ups after review > v1->v2: > * Rebase for mt76x8 changes > * Phylink improvements and clean-ups after review > * SGMII port doesn't support 2.5Gbit in SGMII mode only in BASE-X mode. > Refactor the code. > > René van Dorst (3): > net: ethernet: mediatek: Add basic PHYLINK support > net: ethernet: mediatek: Re-add support SGMII > dt-bindings: net: ethernet: Update mt7622 docs and dts to reflect the > new phylink API > > .../arm/mediatek/mediatek,sgmiisys.txt | 2 - > .../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 28 +- > arch/arm64/boot/dts/mediatek/mt7622.dtsi | 1 - > drivers/net/ethernet/mediatek/Kconfig | 2 +- > drivers/net/ethernet/mediatek/mtk_eth_path.c | 75 +-- > drivers/net/ethernet/mediatek/mtk_eth_soc.c | 529 ++++++++++++------ > drivers/net/ethernet/mediatek/mtk_eth_soc.h | 68 ++- > drivers/net/ethernet/mediatek/mtk_sgmii.c | 65 ++- > 8 files changed, 477 insertions(+), 293 deletions(-) > > -- > 2.20.1 > >
Hi Frank, Quoting Frank Wunderlich <frank-w@public-files.de>: > tested on bpi-r2 (mt7623/mt7530) and bpi-r64 (mt7622/rtl8367) > Thanks for testing! > as reported to rene directly rx-path needs some rework because > current rx-speed > on bpi-r2 is 865 Mbits/sec instead of ~940 Mbits/sec I still think it is a result of the extra code in the rx path when mt76x8 was introduced. Greats, René > > Tested-by: Frank Wunderlich <frank-w@public-files.de> > > regards Frank > > >> Gesendet: Freitag, 23. August 2019 um 15:45 Uhr >> Von: "René van Dorst" <opensource@vdorst.com> >> An: "John Crispin" <john@phrozen.org>, "Sean Wang" >> <sean.wang@mediatek.com>, "Nelson Chang" >> <nelson.chang@mediatek.com>, "David S . Miller" >> <davem@davemloft.net>, "Matthias Brugger" <matthias.bgg@gmail.com> >> Cc: netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org, >> linux-mediatek@lists.infradead.org, linux-mips@vger.kernel.org, >> "Russell King" <linux@armlinux.org.uk>, "Frank Wunderlich" >> <frank-w@public-files.de>, "Stefan Roese" <sr@denx.de>, "René van >> Dorst" <opensource@vdorst.com> >> Betreff: [PATCH net-next v3 0/3] net: ethernet: mediatek: convert to PHYLINK >> >> These patches converts mediatek driver to PHYLINK API. >> >> v2->v3: >> * Phylink improvements and clean-ups after review >> v1->v2: >> * Rebase for mt76x8 changes >> * Phylink improvements and clean-ups after review >> * SGMII port doesn't support 2.5Gbit in SGMII mode only in BASE-X mode. >> Refactor the code. >> >> René van Dorst (3): >> net: ethernet: mediatek: Add basic PHYLINK support >> net: ethernet: mediatek: Re-add support SGMII >> dt-bindings: net: ethernet: Update mt7622 docs and dts to reflect the >> new phylink API >> >> .../arm/mediatek/mediatek,sgmiisys.txt | 2 - >> .../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 28 +- >> arch/arm64/boot/dts/mediatek/mt7622.dtsi | 1 - >> drivers/net/ethernet/mediatek/Kconfig | 2 +- >> drivers/net/ethernet/mediatek/mtk_eth_path.c | 75 +-- >> drivers/net/ethernet/mediatek/mtk_eth_soc.c | 529 ++++++++++++------ >> drivers/net/ethernet/mediatek/mtk_eth_soc.h | 68 ++- >> drivers/net/ethernet/mediatek/mtk_sgmii.c | 65 ++- >> 8 files changed, 477 insertions(+), 293 deletions(-) >> >> -- >> 2.20.1 >> >>
These patches converts mediatek driver to PHYLINK API. v2->v3: * Phylink improvements and clean-ups after review v1->v2: * Rebase for mt76x8 changes * Phylink improvements and clean-ups after review * SGMII port doesn't support 2.5Gbit in SGMII mode only in BASE-X mode. Refactor the code. René van Dorst (3): net: ethernet: mediatek: Add basic PHYLINK support net: ethernet: mediatek: Re-add support SGMII dt-bindings: net: ethernet: Update mt7622 docs and dts to reflect the new phylink API .../arm/mediatek/mediatek,sgmiisys.txt | 2 - .../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 28 +- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 1 - drivers/net/ethernet/mediatek/Kconfig | 2 +- drivers/net/ethernet/mediatek/mtk_eth_path.c | 75 +-- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 529 ++++++++++++------ drivers/net/ethernet/mediatek/mtk_eth_soc.h | 68 ++- drivers/net/ethernet/mediatek/mtk_sgmii.c | 65 ++- 8 files changed, 477 insertions(+), 293 deletions(-)