diff mbox series

ARM: omap2: move platform-specific asm-offset.h to arch/arm/mach-omap2

Message ID 20190823025808.11875-1-yamada.masahiro@socionext.com (mailing list archive)
State New, archived
Headers show
Series ARM: omap2: move platform-specific asm-offset.h to arch/arm/mach-omap2 | expand

Commit Message

Masahiro Yamada Aug. 23, 2019, 2:58 a.m. UTC
<generated/ti-pm-asm-offsets.h> is only generated and included by
arch/arm/mach-omap2/, so it does not need to reside in the globally
visible include/generated/.

I renamed it to arch/arm/mach-omap2/pm-asm-offsets.h since the prefix
'ti-' is just redundant in mach-omap2/.

My main motivation of this change is to avoid the race condition for
the parallel build (-j) when CONFIG_IKHEADERS is enabled.

When it is enabled, all the headers under include/ are archived into
kernel/kheaders_data.tar.xz and exposed in the sysfs.

In the parallel build, we have no idea in which order files are built.

 - If ti-pm-asm-offsets.h is built before kheaders_data.tar.xz,
   the header will be included in the archive. Probably nobody will
   use it, but it is harmless except that it will increase the archive
   size needlessly.

 - If kheaders_data.tar.xz is built before ti-pm-asm-offsets.h,
   the header will not be included in the archive. However, in the next
   build, the archive will be re-generated to include the newly-found
   ti-pm-asm-offsets.h. This is not nice from the build system point
   of view.

 - If ti-pm-asm-offsets.h and kheaders_data.tar.xz are built at the
   same time, the corrupted header might be included in the archive,
   which does not look nice either.

This commit fixes the race.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Keerthy <j-keerthy@ti.com>
---

 arch/arm/mach-omap2/.gitignore  | 1 +
 arch/arm/mach-omap2/Makefile    | 5 +++--
 arch/arm/mach-omap2/sleep33xx.S | 2 +-
 arch/arm/mach-omap2/sleep43xx.S | 2 +-
 4 files changed, 6 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/mach-omap2/.gitignore

Comments

Tony Lindgren Aug. 26, 2019, 4:20 p.m. UTC | #1
* Masahiro Yamada <yamada.masahiro@socionext.com> [190822 19:59]:
> <generated/ti-pm-asm-offsets.h> is only generated and included by
> arch/arm/mach-omap2/, so it does not need to reside in the globally
> visible include/generated/.
> 
> I renamed it to arch/arm/mach-omap2/pm-asm-offsets.h since the prefix
> 'ti-' is just redundant in mach-omap2/.
> 
> My main motivation of this change is to avoid the race condition for
> the parallel build (-j) when CONFIG_IKHEADERS is enabled.
> 
> When it is enabled, all the headers under include/ are archived into
> kernel/kheaders_data.tar.xz and exposed in the sysfs.
> 
> In the parallel build, we have no idea in which order files are built.
> 
>  - If ti-pm-asm-offsets.h is built before kheaders_data.tar.xz,
>    the header will be included in the archive. Probably nobody will
>    use it, but it is harmless except that it will increase the archive
>    size needlessly.
> 
>  - If kheaders_data.tar.xz is built before ti-pm-asm-offsets.h,
>    the header will not be included in the archive. However, in the next
>    build, the archive will be re-generated to include the newly-found
>    ti-pm-asm-offsets.h. This is not nice from the build system point
>    of view.
> 
>  - If ti-pm-asm-offsets.h and kheaders_data.tar.xz are built at the
>    same time, the corrupted header might be included in the archive,
>    which does not look nice either.
> 
> This commit fixes the race.
> 
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> Tested-by: Keerthy <j-keerthy@ti.com>

Applying into omap-for-v5.4/soc thanks. The commit is on top of
v5.3-rc1 so it can be merged into other branches if needed after
it's been sitting in Linux next for few days with no issues.

Regards,

Tony
diff mbox series

Patch

diff --git a/arch/arm/mach-omap2/.gitignore b/arch/arm/mach-omap2/.gitignore
new file mode 100644
index 000000000000..79a8d6ea7152
--- /dev/null
+++ b/arch/arm/mach-omap2/.gitignore
@@ -0,0 +1 @@ 
+pm-asm-offsets.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 600650551621..21c6d4bca3c0 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -223,9 +223,10 @@  obj-y					+= omap_phy_internal.o
 
 obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
 
-include/generated/ti-pm-asm-offsets.h: arch/arm/mach-omap2/pm-asm-offsets.s FORCE
+$(obj)/pm-asm-offsets.h: $(obj)/pm-asm-offsets.s FORCE
 	$(call filechk,offsets,__TI_PM_ASM_OFFSETS_H__)
 
-$(obj)/sleep33xx.o $(obj)/sleep43xx.o: include/generated/ti-pm-asm-offsets.h
+$(obj)/sleep33xx.o $(obj)/sleep43xx.o: $(obj)/pm-asm-offsets.h
 
 targets += pm-asm-offsets.s
+clean-files += pm-asm-offsets.h
diff --git a/arch/arm/mach-omap2/sleep33xx.S b/arch/arm/mach-omap2/sleep33xx.S
index 68fee339d3f1..dc221249bc22 100644
--- a/arch/arm/mach-omap2/sleep33xx.S
+++ b/arch/arm/mach-omap2/sleep33xx.S
@@ -6,7 +6,6 @@ 
  *	Dave Gerlach, Vaibhav Bedia
  */
 
-#include <generated/ti-pm-asm-offsets.h>
 #include <linux/linkage.h>
 #include <linux/platform_data/pm33xx.h>
 #include <linux/ti-emif-sram.h>
@@ -15,6 +14,7 @@ 
 
 #include "iomap.h"
 #include "cm33xx.h"
+#include "pm-asm-offsets.h"
 
 #define AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED			0x00030000
 #define AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE			0x0003
diff --git a/arch/arm/mach-omap2/sleep43xx.S b/arch/arm/mach-omap2/sleep43xx.S
index c1f4e4852644..90d2907a2eb2 100644
--- a/arch/arm/mach-omap2/sleep43xx.S
+++ b/arch/arm/mach-omap2/sleep43xx.S
@@ -6,7 +6,6 @@ 
  *	Dave Gerlach, Vaibhav Bedia
  */
 
-#include <generated/ti-pm-asm-offsets.h>
 #include <linux/linkage.h>
 #include <linux/ti-emif-sram.h>
 #include <linux/platform_data/pm33xx.h>
@@ -19,6 +18,7 @@ 
 #include "iomap.h"
 #include "omap-secure.h"
 #include "omap44xx.h"
+#include "pm-asm-offsets.h"
 #include "prm33xx.h"
 #include "prcm43xx.h"