| Message ID | 20190824184912.795-1-linux.amoon@gmail.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Odroid c2 usb fixs | expand |
Hi Anand, thank you for the patches On Sat, Aug 24, 2019 at 8:49 PM Anand Moon <linux.amoon@gmail.com> wrote: [...] > Anand Moon (3): > arm64: dts: meson: odroid-c2: p5v0 is the main 5V power input > arm64: dts: meson: odroid-c2: Add missing linking regulator to usb bus > arm64: dts: meson: odroid-c2: Disable usb_otg bus to avoid power > failed warning this whole series is: Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Hi Martin, On Sun, 25 Aug 2019 at 02:48, Martin Blumenstingl <martin.blumenstingl@googlemail.com> wrote: > > Hi Anand, > > thank you for the patches > > On Sat, Aug 24, 2019 at 8:49 PM Anand Moon <linux.amoon@gmail.com> wrote: > [...] > > Anand Moon (3): > > arm64: dts: meson: odroid-c2: p5v0 is the main 5V power input > > arm64: dts: meson: odroid-c2: Add missing linking regulator to usb bus > > arm64: dts: meson: odroid-c2: Disable usb_otg bus to avoid power > > failed warning > this whole series is: > Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Thanks, I have some more patch in line for this board. Best Regards -Anand
On Mon, Aug 26, 2019 at 6:38 AM Anand Moon <linux.amoon@gmail.com> wrote: > > Hi Martin, > > On Sun, 25 Aug 2019 at 02:48, Martin Blumenstingl > <martin.blumenstingl@googlemail.com> wrote: > > > > Hi Anand, > > > > thank you for the patches > > > > On Sat, Aug 24, 2019 at 8:49 PM Anand Moon <linux.amoon@gmail.com> wrote: > > [...] > > > Anand Moon (3): > > > arm64: dts: meson: odroid-c2: p5v0 is the main 5V power input > > > arm64: dts: meson: odroid-c2: Add missing linking regulator to usb bus > > > arm64: dts: meson: odroid-c2: Disable usb_otg bus to avoid power > > > failed warning > > this whole series is: > > Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > > Thanks, I have some more patch in line for this board. great, any improvement counts (especially since most boards are derived from Amlogic reference designs, so it's likely that more than just the Odroid-C2 will benefit from your patches) :)
Some time ago I had tired to enable usb bus 1 for Odroid C2/C1 but it's look like some more work is needed to u-boot and usb_phy driver to initialize this port. Below patches tries to address the issue regarding usb bus 2 (4 port) while disable the usb bus 1 on this board. Prevoius patch [0] https://lkml.org/lkml/2019/1/29/325 I have tried to split the patchs for now. Anand Moon (3): arm64: dts: meson: odroid-c2: p5v0 is the main 5V power input arm64: dts: meson: odroid-c2: Add missing linking regulator to usb bus arm64: dts: meson: odroid-c2: Disable usb_otg bus to avoid power failed warning .../boot/dts/amlogic/meson-gxbb-odroidc2.dts | 20 +++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)