| Message ID | 20190810052829.6032-10-tiny.windzz@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Zhang Rui |
| Headers | show |
| Series | add thermal driver for h6 | expand |
On Sat, 2019-08-10 at 05:28 +0000, Yangtao Li wrote: > Here, we do something to prepare for the subsequent > support of multiple platforms. > > 1) rename sun50i_ths_calibrate to sun8i_ths_calibrate, because > this function should be suitable for all platforms now. > > 2) introduce calibrate callback to mask calibration method > differences. > > Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> IMO, patch 4/18 to patch 9/18 are all changes to a new file introduced in patch 1/18, so why not have a prettier patch 1/18 instead of separate patches? thanks, rui > --- > drivers/thermal/sun8i_thermal.c | 86 ++++++++++++++++++------------- > -- > 1 file changed, 48 insertions(+), 38 deletions(-) > > diff --git a/drivers/thermal/sun8i_thermal.c > b/drivers/thermal/sun8i_thermal.c > index 6f4294c2aba7..47c20c4c69e7 100644 > --- a/drivers/thermal/sun8i_thermal.c > +++ b/drivers/thermal/sun8i_thermal.c > @@ -60,6 +60,8 @@ struct ths_thermal_chip { > int scale; > int ft_deviation; > int temp_data_base; > + int (*calibrate)(struct ths_device *tmdev, > + u16 *caldata, int callen); > int (*init)(struct ths_device *tmdev); > int (*irq_ack)(struct ths_device *tmdev); > }; > @@ -152,45 +154,14 @@ static irqreturn_t sun8i_irq_thread(int irq, > void *data) > return IRQ_HANDLED; > } > > -static int sun50i_ths_calibrate(struct ths_device *tmdev) > +static int sun50i_h6_ths_calibrate(struct ths_device *tmdev, > + u16 *caldata, int callen) > { > - struct nvmem_cell *calcell; > struct device *dev = tmdev->dev; > - u16 *caldata; > - size_t callen; > - int ft_temp; > - int i, ret = 0; > - > - calcell = devm_nvmem_cell_get(dev, "calib"); > - if (IS_ERR(calcell)) { > - if (PTR_ERR(calcell) == -EPROBE_DEFER) > - return -EPROBE_DEFER; > - /* > - * Even if the external calibration data stored in sid > is > - * not accessible, the THS hardware can still work, > although > - * the data won't be so accurate. > - * > - * The default value of calibration register is 0x800 > for > - * every sensor, and the calibration value is usually > 0x7xx > - * or 0x8xx, so they won't be away from the default > value > - * for a lot. > - * > - * So here we do not return error if the calibartion > data is > - * not available, except the probe needs deferring. > - */ > - goto out; > - } > + int i, ft_temp; > > - caldata = nvmem_cell_read(calcell, &callen); > - if (IS_ERR(caldata)) { > - ret = PTR_ERR(caldata); > - goto out; > - } > - > - if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num) { > - ret = -EINVAL; > - goto out_free; > - } > + if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num) > + return -EINVAL; > > /* > * efuse layout: > @@ -245,7 +216,45 @@ static int sun50i_ths_calibrate(struct > ths_device *tmdev) > cdata << offset); > } > > -out_free: > + return 0; > +} > + > +static int sun8i_ths_calibrate(struct ths_device *tmdev) > +{ > + struct nvmem_cell *calcell; > + struct device *dev = tmdev->dev; > + u16 *caldata; > + size_t callen; > + int ret = 0; > + > + calcell = devm_nvmem_cell_get(dev, "calib"); > + if (IS_ERR(calcell)) { > + if (PTR_ERR(calcell) == -EPROBE_DEFER) > + return -EPROBE_DEFER; > + /* > + * Even if the external calibration data stored in sid > is > + * not accessible, the THS hardware can still work, > although > + * the data won't be so accurate. > + * > + * The default value of calibration register is 0x800 > for > + * every sensor, and the calibration value is usually > 0x7xx > + * or 0x8xx, so they won't be away from the default > value > + * for a lot. > + * > + * So here we do not return error if the calibartion > data is > + * not available, except the probe needs deferring. > + */ > + goto out; > + } > + > + caldata = nvmem_cell_read(calcell, &callen); > + if (IS_ERR(caldata)) { > + ret = PTR_ERR(caldata); > + goto out; > + } > + > + tmdev->chip->calibrate(tmdev, caldata, callen); > + > kfree(caldata); > out: > return ret; > @@ -294,7 +303,7 @@ static int sun8i_ths_resource_init(struct > ths_device *tmdev) > if (ret) > goto bus_disable; > > - ret = sun50i_ths_calibrate(tmdev); > + ret = sun8i_ths_calibrate(tmdev); > if (ret) > goto mod_disable; > > @@ -422,6 +431,7 @@ static const struct ths_thermal_chip > sun50i_h6_ths = { > .scale = -67, > .ft_deviation = SUN50I_H6_FT_DEVIATION, > .temp_data_base = SUN50I_H6_THS_TEMP_DATA, > + .calibrate = sun50i_h6_ths_calibrate, > .init = sun50i_h6_thermal_init, > .irq_ack = sun50i_h6_irq_ack, > };
diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c index 6f4294c2aba7..47c20c4c69e7 100644 --- a/drivers/thermal/sun8i_thermal.c +++ b/drivers/thermal/sun8i_thermal.c @@ -60,6 +60,8 @@ struct ths_thermal_chip { int scale; int ft_deviation; int temp_data_base; + int (*calibrate)(struct ths_device *tmdev, + u16 *caldata, int callen); int (*init)(struct ths_device *tmdev); int (*irq_ack)(struct ths_device *tmdev); }; @@ -152,45 +154,14 @@ static irqreturn_t sun8i_irq_thread(int irq, void *data) return IRQ_HANDLED; } -static int sun50i_ths_calibrate(struct ths_device *tmdev) +static int sun50i_h6_ths_calibrate(struct ths_device *tmdev, + u16 *caldata, int callen) { - struct nvmem_cell *calcell; struct device *dev = tmdev->dev; - u16 *caldata; - size_t callen; - int ft_temp; - int i, ret = 0; - - calcell = devm_nvmem_cell_get(dev, "calib"); - if (IS_ERR(calcell)) { - if (PTR_ERR(calcell) == -EPROBE_DEFER) - return -EPROBE_DEFER; - /* - * Even if the external calibration data stored in sid is - * not accessible, the THS hardware can still work, although - * the data won't be so accurate. - * - * The default value of calibration register is 0x800 for - * every sensor, and the calibration value is usually 0x7xx - * or 0x8xx, so they won't be away from the default value - * for a lot. - * - * So here we do not return error if the calibartion data is - * not available, except the probe needs deferring. - */ - goto out; - } + int i, ft_temp; - caldata = nvmem_cell_read(calcell, &callen); - if (IS_ERR(caldata)) { - ret = PTR_ERR(caldata); - goto out; - } - - if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num) { - ret = -EINVAL; - goto out_free; - } + if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num) + return -EINVAL; /* * efuse layout: @@ -245,7 +216,45 @@ static int sun50i_ths_calibrate(struct ths_device *tmdev) cdata << offset); } -out_free: + return 0; +} + +static int sun8i_ths_calibrate(struct ths_device *tmdev) +{ + struct nvmem_cell *calcell; + struct device *dev = tmdev->dev; + u16 *caldata; + size_t callen; + int ret = 0; + + calcell = devm_nvmem_cell_get(dev, "calib"); + if (IS_ERR(calcell)) { + if (PTR_ERR(calcell) == -EPROBE_DEFER) + return -EPROBE_DEFER; + /* + * Even if the external calibration data stored in sid is + * not accessible, the THS hardware can still work, although + * the data won't be so accurate. + * + * The default value of calibration register is 0x800 for + * every sensor, and the calibration value is usually 0x7xx + * or 0x8xx, so they won't be away from the default value + * for a lot. + * + * So here we do not return error if the calibartion data is + * not available, except the probe needs deferring. + */ + goto out; + } + + caldata = nvmem_cell_read(calcell, &callen); + if (IS_ERR(caldata)) { + ret = PTR_ERR(caldata); + goto out; + } + + tmdev->chip->calibrate(tmdev, caldata, callen); + kfree(caldata); out: return ret; @@ -294,7 +303,7 @@ static int sun8i_ths_resource_init(struct ths_device *tmdev) if (ret) goto bus_disable; - ret = sun50i_ths_calibrate(tmdev); + ret = sun8i_ths_calibrate(tmdev); if (ret) goto mod_disable; @@ -422,6 +431,7 @@ static const struct ths_thermal_chip sun50i_h6_ths = { .scale = -67, .ft_deviation = SUN50I_H6_FT_DEVIATION, .temp_data_base = SUN50I_H6_THS_TEMP_DATA, + .calibrate = sun50i_h6_ths_calibrate, .init = sun50i_h6_thermal_init, .irq_ack = sun50i_h6_irq_ack, };
Here, we do something to prepare for the subsequent support of multiple platforms. 1) rename sun50i_ths_calibrate to sun8i_ths_calibrate, because this function should be suitable for all platforms now. 2) introduce calibrate callback to mask calibration method differences. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> --- drivers/thermal/sun8i_thermal.c | 86 ++++++++++++++++++--------------- 1 file changed, 48 insertions(+), 38 deletions(-)