| Message ID | 20190827202835.213456-1-hdegoede@redhat.com (mailing list archive) |
|---|---|
| State | Mainlined, archived |
| Headers | show |
| Series | [v2] gpiolib: acpi: Add gpiolib_acpi_run_edge_events_on_boot option and blacklist | expand |
On Tue, Aug 27, 2019 at 10:28:35PM +0200, Hans de Goede wrote: > Another day; another DSDT bug we need to workaround... > > Since commit ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events > at least once on boot") we call _AEI edge handlers at boot. > > In some rare cases this causes problems. One example of this is the Minix > Neo Z83-4 mini PC, this device has a clear DSDT bug where it has some copy > and pasted code for dealing with Micro USB-B connector host/device role > switching, while the mini PC does not even have a micro-USB connector. > This code, which should not be there, messes with the DDC data pin from > the HDMI connector (switching it to GPIO mode) breaking HDMI support. > > To avoid problems like this, this commit adds a new > gpiolib_acpi.run_edge_events_on_boot kernel commandline option, which > allows disabling the running of _AEI edge event handlers at boot. > > The default value is -1/auto which uses a DMI based blacklist, the initial > version of this blacklist contains the Neo Z83-4 fixing the HDMI breakage. > > Cc: stable@vger.kernel.org > Cc: Daniel Drake <drake@endlessm.com> > Cc: Ian W MORRISON <ianwmorrison@gmail.com> > Reported-by: Ian W MORRISON <ianwmorrison@gmail.com> > Suggested-by: Ian W MORRISON <ianwmorrison@gmail.com> > Fixes: ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events at least once on boot") > Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
On Tue, Aug 27, 2019 at 10:28:35PM +0200, Hans de Goede wrote: > Another day; another DSDT bug we need to workaround... > > Since commit ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events > at least once on boot") we call _AEI edge handlers at boot. > > In some rare cases this causes problems. One example of this is the Minix > Neo Z83-4 mini PC, this device has a clear DSDT bug where it has some copy > and pasted code for dealing with Micro USB-B connector host/device role > switching, while the mini PC does not even have a micro-USB connector. > This code, which should not be there, messes with the DDC data pin from > the HDMI connector (switching it to GPIO mode) breaking HDMI support. > > To avoid problems like this, this commit adds a new > gpiolib_acpi.run_edge_events_on_boot kernel commandline option, which > allows disabling the running of _AEI edge event handlers at boot. > > The default value is -1/auto which uses a DMI based blacklist, the initial > version of this blacklist contains the Neo Z83-4 fixing the HDMI breakage. Thank you! Assuming it works for Ian, Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > > Cc: stable@vger.kernel.org > Cc: Daniel Drake <drake@endlessm.com> > Cc: Ian W MORRISON <ianwmorrison@gmail.com> > Reported-by: Ian W MORRISON <ianwmorrison@gmail.com> > Suggested-by: Ian W MORRISON <ianwmorrison@gmail.com> > Fixes: ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events at least once on boot") > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > --- > Changes in v2: > - Use a module_param instead of __setup > - Do DMI check only once from a postcore_initcall > --- > drivers/gpio/gpiolib-acpi.c | 42 +++++++++++++++++++++++++++++++++---- > 1 file changed, 38 insertions(+), 4 deletions(-) > > diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c > index 39f2f9035c11..bda28eb82c3f 100644 > --- a/drivers/gpio/gpiolib-acpi.c > +++ b/drivers/gpio/gpiolib-acpi.c > @@ -7,6 +7,7 @@ > * Mika Westerberg <mika.westerberg@linux.intel.com> > */ > > +#include <linux/dmi.h> > #include <linux/errno.h> > #include <linux/gpio/consumer.h> > #include <linux/gpio/driver.h> > @@ -19,6 +20,11 @@ > > #include "gpiolib.h" > > +static int run_edge_events_on_boot = -1; > +module_param(run_edge_events_on_boot, int, 0444); > +MODULE_PARM_DESC(run_edge_events_on_boot, > + "Run edge _AEI event-handlers at boot: 0=no, 1=yes, -1=auto"); > + > /** > * struct acpi_gpio_event - ACPI GPIO event handler data > * > @@ -170,10 +176,13 @@ static void acpi_gpiochip_request_irq(struct acpi_gpio_chip *acpi_gpio, > event->irq_requested = true; > > /* Make sure we trigger the initial state of edge-triggered IRQs */ > - value = gpiod_get_raw_value_cansleep(event->desc); > - if (((event->irqflags & IRQF_TRIGGER_RISING) && value == 1) || > - ((event->irqflags & IRQF_TRIGGER_FALLING) && value == 0)) > - event->handler(event->irq, event); > + if (run_edge_events_on_boot && > + (event->irqflags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING))) { > + value = gpiod_get_raw_value_cansleep(event->desc); > + if (((event->irqflags & IRQF_TRIGGER_RISING) && value == 1) || > + ((event->irqflags & IRQF_TRIGGER_FALLING) && value == 0)) > + event->handler(event->irq, event); > + } > } > > static void acpi_gpiochip_request_irqs(struct acpi_gpio_chip *acpi_gpio) > @@ -1283,3 +1292,28 @@ static int acpi_gpio_handle_deferred_request_irqs(void) > } > /* We must use _sync so that this runs after the first deferred_probe run */ > late_initcall_sync(acpi_gpio_handle_deferred_request_irqs); > + > +static const struct dmi_system_id run_edge_events_on_boot_blacklist[] = { > + { > + .matches = { > + DMI_MATCH(DMI_SYS_VENDOR, "MINIX"), > + DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"), > + } > + }, > + {} /* Terminating entry */ > +}; > + > +static int acpi_gpio_setup_params(void) > +{ > + if (run_edge_events_on_boot < 0) { > + if (dmi_check_system(run_edge_events_on_boot_blacklist)) > + run_edge_events_on_boot = 0; > + else > + run_edge_events_on_boot = 1; > + } > + > + return 0; > +} > + > +/* Directly after dmi_setup() which runs as core_initcall() */ > +postcore_initcall(acpi_gpio_setup_params); > -- > 2.23.0 >
Hi, On 28-08-19 13:37, Andy Shevchenko wrote: > On Tue, Aug 27, 2019 at 10:28:35PM +0200, Hans de Goede wrote: >> Another day; another DSDT bug we need to workaround... >> >> Since commit ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events >> at least once on boot") we call _AEI edge handlers at boot. >> >> In some rare cases this causes problems. One example of this is the Minix >> Neo Z83-4 mini PC, this device has a clear DSDT bug where it has some copy >> and pasted code for dealing with Micro USB-B connector host/device role >> switching, while the mini PC does not even have a micro-USB connector. >> This code, which should not be there, messes with the DDC data pin from >> the HDMI connector (switching it to GPIO mode) breaking HDMI support. >> >> To avoid problems like this, this commit adds a new >> gpiolib_acpi.run_edge_events_on_boot kernel commandline option, which >> allows disabling the running of _AEI edge event handlers at boot. >> >> The default value is -1/auto which uses a DMI based blacklist, the initial >> version of this blacklist contains the Neo Z83-4 fixing the HDMI breakage. > > Thank you! > > Assuming it works for Ian, > Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Note I have access to a Minix Neo Z83-4 myself now and I did test that this fixes it and that passing gpiolib_acpi.run_edge_events_on_boot=0 breaks HDMI again (so the option works). Regards, Hans > >> >> Cc: stable@vger.kernel.org >> Cc: Daniel Drake <drake@endlessm.com> >> Cc: Ian W MORRISON <ianwmorrison@gmail.com> >> Reported-by: Ian W MORRISON <ianwmorrison@gmail.com> >> Suggested-by: Ian W MORRISON <ianwmorrison@gmail.com> >> Fixes: ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events at least once on boot") >> Signed-off-by: Hans de Goede <hdegoede@redhat.com> >> --- >> Changes in v2: >> - Use a module_param instead of __setup >> - Do DMI check only once from a postcore_initcall >> --- >> drivers/gpio/gpiolib-acpi.c | 42 +++++++++++++++++++++++++++++++++---- >> 1 file changed, 38 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c >> index 39f2f9035c11..bda28eb82c3f 100644 >> --- a/drivers/gpio/gpiolib-acpi.c >> +++ b/drivers/gpio/gpiolib-acpi.c >> @@ -7,6 +7,7 @@ >> * Mika Westerberg <mika.westerberg@linux.intel.com> >> */ >> >> +#include <linux/dmi.h> >> #include <linux/errno.h> >> #include <linux/gpio/consumer.h> >> #include <linux/gpio/driver.h> >> @@ -19,6 +20,11 @@ >> >> #include "gpiolib.h" >> >> +static int run_edge_events_on_boot = -1; >> +module_param(run_edge_events_on_boot, int, 0444); >> +MODULE_PARM_DESC(run_edge_events_on_boot, >> + "Run edge _AEI event-handlers at boot: 0=no, 1=yes, -1=auto"); >> + >> /** >> * struct acpi_gpio_event - ACPI GPIO event handler data >> * >> @@ -170,10 +176,13 @@ static void acpi_gpiochip_request_irq(struct acpi_gpio_chip *acpi_gpio, >> event->irq_requested = true; >> >> /* Make sure we trigger the initial state of edge-triggered IRQs */ >> - value = gpiod_get_raw_value_cansleep(event->desc); >> - if (((event->irqflags & IRQF_TRIGGER_RISING) && value == 1) || >> - ((event->irqflags & IRQF_TRIGGER_FALLING) && value == 0)) >> - event->handler(event->irq, event); >> + if (run_edge_events_on_boot && >> + (event->irqflags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING))) { >> + value = gpiod_get_raw_value_cansleep(event->desc); >> + if (((event->irqflags & IRQF_TRIGGER_RISING) && value == 1) || >> + ((event->irqflags & IRQF_TRIGGER_FALLING) && value == 0)) >> + event->handler(event->irq, event); >> + } >> } >> >> static void acpi_gpiochip_request_irqs(struct acpi_gpio_chip *acpi_gpio) >> @@ -1283,3 +1292,28 @@ static int acpi_gpio_handle_deferred_request_irqs(void) >> } >> /* We must use _sync so that this runs after the first deferred_probe run */ >> late_initcall_sync(acpi_gpio_handle_deferred_request_irqs); >> + >> +static const struct dmi_system_id run_edge_events_on_boot_blacklist[] = { >> + { >> + .matches = { >> + DMI_MATCH(DMI_SYS_VENDOR, "MINIX"), >> + DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"), >> + } >> + }, >> + {} /* Terminating entry */ >> +}; >> + >> +static int acpi_gpio_setup_params(void) >> +{ >> + if (run_edge_events_on_boot < 0) { >> + if (dmi_check_system(run_edge_events_on_boot_blacklist)) >> + run_edge_events_on_boot = 0; >> + else >> + run_edge_events_on_boot = 1; >> + } >> + >> + return 0; >> +} >> + >> +/* Directly after dmi_setup() which runs as core_initcall() */ >> +postcore_initcall(acpi_gpio_setup_params); >> -- >> 2.23.0 >> >
Hi, On 28-08-19 14:20, Hans de Goede wrote: > Hi, > > On 28-08-19 13:37, Andy Shevchenko wrote: >> On Tue, Aug 27, 2019 at 10:28:35PM +0200, Hans de Goede wrote: >>> Another day; another DSDT bug we need to workaround... >>> >>> Since commit ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events >>> at least once on boot") we call _AEI edge handlers at boot. >>> >>> In some rare cases this causes problems. One example of this is the Minix >>> Neo Z83-4 mini PC, this device has a clear DSDT bug where it has some copy >>> and pasted code for dealing with Micro USB-B connector host/device role >>> switching, while the mini PC does not even have a micro-USB connector. >>> This code, which should not be there, messes with the DDC data pin from >>> the HDMI connector (switching it to GPIO mode) breaking HDMI support. >>> >>> To avoid problems like this, this commit adds a new >>> gpiolib_acpi.run_edge_events_on_boot kernel commandline option, which >>> allows disabling the running of _AEI edge event handlers at boot. >>> >>> The default value is -1/auto which uses a DMI based blacklist, the initial >>> version of this blacklist contains the Neo Z83-4 fixing the HDMI breakage. >> >> Thank you! >> >> Assuming it works for Ian, >> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > > Note I have access to a Minix Neo Z83-4 myself now and I did test that > this fixes it and that passing gpiolib_acpi.run_edge_events_on_boot=0 > breaks HDMI again (so the option works). Erm that should be gpiolib_acpi.run_edge_events_on_boot=1 (not 0) breaks HDMI. Regards, Hans >>> Cc: stable@vger.kernel.org >>> Cc: Daniel Drake <drake@endlessm.com> >>> Cc: Ian W MORRISON <ianwmorrison@gmail.com> >>> Reported-by: Ian W MORRISON <ianwmorrison@gmail.com> >>> Suggested-by: Ian W MORRISON <ianwmorrison@gmail.com> >>> Fixes: ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events at least once on boot") >>> Signed-off-by: Hans de Goede <hdegoede@redhat.com> >>> --- >>> Changes in v2: >>> - Use a module_param instead of __setup >>> - Do DMI check only once from a postcore_initcall >>> --- >>> drivers/gpio/gpiolib-acpi.c | 42 +++++++++++++++++++++++++++++++++---- >>> 1 file changed, 38 insertions(+), 4 deletions(-) >>> >>> diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c >>> index 39f2f9035c11..bda28eb82c3f 100644 >>> --- a/drivers/gpio/gpiolib-acpi.c >>> +++ b/drivers/gpio/gpiolib-acpi.c >>> @@ -7,6 +7,7 @@ >>> * Mika Westerberg <mika.westerberg@linux.intel.com> >>> */ >>> +#include <linux/dmi.h> >>> #include <linux/errno.h> >>> #include <linux/gpio/consumer.h> >>> #include <linux/gpio/driver.h> >>> @@ -19,6 +20,11 @@ >>> #include "gpiolib.h" >>> +static int run_edge_events_on_boot = -1; >>> +module_param(run_edge_events_on_boot, int, 0444); >>> +MODULE_PARM_DESC(run_edge_events_on_boot, >>> + "Run edge _AEI event-handlers at boot: 0=no, 1=yes, -1=auto"); >>> + >>> /** >>> * struct acpi_gpio_event - ACPI GPIO event handler data >>> * >>> @@ -170,10 +176,13 @@ static void acpi_gpiochip_request_irq(struct acpi_gpio_chip *acpi_gpio, >>> event->irq_requested = true; >>> /* Make sure we trigger the initial state of edge-triggered IRQs */ >>> - value = gpiod_get_raw_value_cansleep(event->desc); >>> - if (((event->irqflags & IRQF_TRIGGER_RISING) && value == 1) || >>> - ((event->irqflags & IRQF_TRIGGER_FALLING) && value == 0)) >>> - event->handler(event->irq, event); >>> + if (run_edge_events_on_boot && >>> + (event->irqflags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING))) { >>> + value = gpiod_get_raw_value_cansleep(event->desc); >>> + if (((event->irqflags & IRQF_TRIGGER_RISING) && value == 1) || >>> + ((event->irqflags & IRQF_TRIGGER_FALLING) && value == 0)) >>> + event->handler(event->irq, event); >>> + } >>> } >>> static void acpi_gpiochip_request_irqs(struct acpi_gpio_chip *acpi_gpio) >>> @@ -1283,3 +1292,28 @@ static int acpi_gpio_handle_deferred_request_irqs(void) >>> } >>> /* We must use _sync so that this runs after the first deferred_probe run */ >>> late_initcall_sync(acpi_gpio_handle_deferred_request_irqs); >>> + >>> +static const struct dmi_system_id run_edge_events_on_boot_blacklist[] = { >>> + { >>> + .matches = { >>> + DMI_MATCH(DMI_SYS_VENDOR, "MINIX"), >>> + DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"), >>> + } >>> + }, >>> + {} /* Terminating entry */ >>> +}; >>> + >>> +static int acpi_gpio_setup_params(void) >>> +{ >>> + if (run_edge_events_on_boot < 0) { >>> + if (dmi_check_system(run_edge_events_on_boot_blacklist)) >>> + run_edge_events_on_boot = 0; >>> + else >>> + run_edge_events_on_boot = 1; >>> + } >>> + >>> + return 0; >>> +} >>> + >>> +/* Directly after dmi_setup() which runs as core_initcall() */ >>> +postcore_initcall(acpi_gpio_setup_params); >>> -- >>> 2.23.0 >>> >>
On Wed, 28 Aug 2019 at 22:21, Hans de Goede <hdegoede@redhat.com> wrote: > > Hi, > > On 28-08-19 14:20, Hans de Goede wrote: > > Hi, > > > > On 28-08-19 13:37, Andy Shevchenko wrote: > >> On Tue, Aug 27, 2019 at 10:28:35PM +0200, Hans de Goede wrote: > >>> Another day; another DSDT bug we need to workaround... > >>> > >>> Since commit ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events > >>> at least once on boot") we call _AEI edge handlers at boot. > >>> > >>> In some rare cases this causes problems. One example of this is the Minix > >>> Neo Z83-4 mini PC, this device has a clear DSDT bug where it has some copy > >>> and pasted code for dealing with Micro USB-B connector host/device role > >>> switching, while the mini PC does not even have a micro-USB connector. > >>> This code, which should not be there, messes with the DDC data pin from > >>> the HDMI connector (switching it to GPIO mode) breaking HDMI support. > >>> > >>> To avoid problems like this, this commit adds a new > >>> gpiolib_acpi.run_edge_events_on_boot kernel commandline option, which > >>> allows disabling the running of _AEI edge event handlers at boot. > >>> > >>> The default value is -1/auto which uses a DMI based blacklist, the initial > >>> version of this blacklist contains the Neo Z83-4 fixing the HDMI breakage. > >> > >> Thank you! > >> > >> Assuming it works for Ian, > >> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > > > > Note I have access to a Minix Neo Z83-4 myself now and I did test that > > this fixes it and that passing gpiolib_acpi.run_edge_events_on_boot=0 > > breaks HDMI again (so the option works). > > Erm that should be gpiolib_acpi.run_edge_events_on_boot=1 (not 0) breaks > HDMI. > Many thanks again Hans. I've also tested the patch including the various command line options on my MINIX Z83-4 and they work fine. Best regards, Ian
On Tue, Aug 27, 2019 at 9:28 PM Hans de Goede <hdegoede@redhat.com> wrote: > Another day; another DSDT bug we need to workaround... > > Since commit ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events > at least once on boot") we call _AEI edge handlers at boot. > > In some rare cases this causes problems. One example of this is the Minix > Neo Z83-4 mini PC, this device has a clear DSDT bug where it has some copy > and pasted code for dealing with Micro USB-B connector host/device role > switching, while the mini PC does not even have a micro-USB connector. > This code, which should not be there, messes with the DDC data pin from > the HDMI connector (switching it to GPIO mode) breaking HDMI support. > > To avoid problems like this, this commit adds a new > gpiolib_acpi.run_edge_events_on_boot kernel commandline option, which > allows disabling the running of _AEI edge event handlers at boot. > > The default value is -1/auto which uses a DMI based blacklist, the initial > version of this blacklist contains the Neo Z83-4 fixing the HDMI breakage. > > Cc: stable@vger.kernel.org > Cc: Daniel Drake <drake@endlessm.com> > Cc: Ian W MORRISON <ianwmorrison@gmail.com> > Reported-by: Ian W MORRISON <ianwmorrison@gmail.com> > Suggested-by: Ian W MORRISON <ianwmorrison@gmail.com> > Fixes: ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events at least once on boot") > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > --- > Changes in v2: > - Use a module_param instead of __setup > - Do DMI check only once from a postcore_initcall Patch applied for fixes, thanks for working this out, sorry for slow reply. Yours, Linus Walleij
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c index 39f2f9035c11..bda28eb82c3f 100644 --- a/drivers/gpio/gpiolib-acpi.c +++ b/drivers/gpio/gpiolib-acpi.c @@ -7,6 +7,7 @@ * Mika Westerberg <mika.westerberg@linux.intel.com> */ +#include <linux/dmi.h> #include <linux/errno.h> #include <linux/gpio/consumer.h> #include <linux/gpio/driver.h> @@ -19,6 +20,11 @@ #include "gpiolib.h" +static int run_edge_events_on_boot = -1; +module_param(run_edge_events_on_boot, int, 0444); +MODULE_PARM_DESC(run_edge_events_on_boot, + "Run edge _AEI event-handlers at boot: 0=no, 1=yes, -1=auto"); + /** * struct acpi_gpio_event - ACPI GPIO event handler data * @@ -170,10 +176,13 @@ static void acpi_gpiochip_request_irq(struct acpi_gpio_chip *acpi_gpio, event->irq_requested = true; /* Make sure we trigger the initial state of edge-triggered IRQs */ - value = gpiod_get_raw_value_cansleep(event->desc); - if (((event->irqflags & IRQF_TRIGGER_RISING) && value == 1) || - ((event->irqflags & IRQF_TRIGGER_FALLING) && value == 0)) - event->handler(event->irq, event); + if (run_edge_events_on_boot && + (event->irqflags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING))) { + value = gpiod_get_raw_value_cansleep(event->desc); + if (((event->irqflags & IRQF_TRIGGER_RISING) && value == 1) || + ((event->irqflags & IRQF_TRIGGER_FALLING) && value == 0)) + event->handler(event->irq, event); + } } static void acpi_gpiochip_request_irqs(struct acpi_gpio_chip *acpi_gpio) @@ -1283,3 +1292,28 @@ static int acpi_gpio_handle_deferred_request_irqs(void) } /* We must use _sync so that this runs after the first deferred_probe run */ late_initcall_sync(acpi_gpio_handle_deferred_request_irqs); + +static const struct dmi_system_id run_edge_events_on_boot_blacklist[] = { + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MINIX"), + DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"), + } + }, + {} /* Terminating entry */ +}; + +static int acpi_gpio_setup_params(void) +{ + if (run_edge_events_on_boot < 0) { + if (dmi_check_system(run_edge_events_on_boot_blacklist)) + run_edge_events_on_boot = 0; + else + run_edge_events_on_boot = 1; + } + + return 0; +} + +/* Directly after dmi_setup() which runs as core_initcall() */ +postcore_initcall(acpi_gpio_setup_params);
Another day; another DSDT bug we need to workaround... Since commit ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events at least once on boot") we call _AEI edge handlers at boot. In some rare cases this causes problems. One example of this is the Minix Neo Z83-4 mini PC, this device has a clear DSDT bug where it has some copy and pasted code for dealing with Micro USB-B connector host/device role switching, while the mini PC does not even have a micro-USB connector. This code, which should not be there, messes with the DDC data pin from the HDMI connector (switching it to GPIO mode) breaking HDMI support. To avoid problems like this, this commit adds a new gpiolib_acpi.run_edge_events_on_boot kernel commandline option, which allows disabling the running of _AEI edge event handlers at boot. The default value is -1/auto which uses a DMI based blacklist, the initial version of this blacklist contains the Neo Z83-4 fixing the HDMI breakage. Cc: stable@vger.kernel.org Cc: Daniel Drake <drake@endlessm.com> Cc: Ian W MORRISON <ianwmorrison@gmail.com> Reported-by: Ian W MORRISON <ianwmorrison@gmail.com> Suggested-by: Ian W MORRISON <ianwmorrison@gmail.com> Fixes: ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events at least once on boot") Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- Changes in v2: - Use a module_param instead of __setup - Do DMI check only once from a postcore_initcall --- drivers/gpio/gpiolib-acpi.c | 42 +++++++++++++++++++++++++++++++++---- 1 file changed, 38 insertions(+), 4 deletions(-)