| Message ID | 20190828131505.28475-5-vidyas@nvidia.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | PCI: tegra: Enable PCIe C5 controller of Tegra194 in p2972-0000 platform | expand |
On Wed, Aug 28, 2019 at 06:45:03PM +0530, Vidya Sagar wrote: > Add support to get regulator information of 3.3V and 12V supplies of a PCIe > slot from the respective controller's device-tree node and enable those > supplies. This is required in platforms like p2972-0000 where the supplies > to x16 slot owned by C5 controller need to be enabled before attempting to > enumerate the devices. > > Signed-off-by: Vidya Sagar <vidyas@nvidia.com> > --- > V2: > * Addressed review comments from Thierry Reding and Andrew Murray > * Handled failure case of devm_regulator_get_optional() for -ENODEV cleanly > > drivers/pci/controller/dwc/pcie-tegra194.c | 80 ++++++++++++++++++++++ > 1 file changed, 80 insertions(+) > > diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c > index 057ba4f9fbcd..6a66101ec83d 100644 > --- a/drivers/pci/controller/dwc/pcie-tegra194.c > +++ b/drivers/pci/controller/dwc/pcie-tegra194.c > @@ -278,6 +278,8 @@ struct tegra_pcie_dw { > u32 aspm_l0s_enter_lat; > > struct regulator *pex_ctl_supply; > + struct regulator *slot_ctl_3v3; > + struct regulator *slot_ctl_12v; > > unsigned int phy_count; > struct phy **phys; > @@ -1047,6 +1049,72 @@ static void tegra_pcie_downstream_dev_to_D0(struct tegra_pcie_dw *pcie) > } > } > > +static int tegra_pcie_get_slot_regulators(struct tegra_pcie_dw *pcie) > +{ > + pcie->slot_ctl_3v3 = devm_regulator_get_optional(pcie->dev, "vpcie3v3"); > + if (IS_ERR(pcie->slot_ctl_3v3)) { > + if (PTR_ERR(pcie->slot_ctl_3v3) != -ENODEV) > + return PTR_ERR(pcie->slot_ctl_3v3); > + > + pcie->slot_ctl_3v3 = NULL; > + } > + > + pcie->slot_ctl_12v = devm_regulator_get_optional(pcie->dev, "vpcie12v"); > + if (IS_ERR(pcie->slot_ctl_12v)) { > + if (PTR_ERR(pcie->slot_ctl_12v) != -ENODEV) > + return PTR_ERR(pcie->slot_ctl_12v); > + > + pcie->slot_ctl_12v = NULL; > + } > + > + return 0; > +} > + > +static int tegra_pcie_enable_slot_regulators(struct tegra_pcie_dw *pcie) > +{ > + int ret; > + > + if (pcie->slot_ctl_3v3) { > + ret = regulator_enable(pcie->slot_ctl_3v3); > + if (ret < 0) { > + dev_err(pcie->dev, > + "Failed to enable 3V3 slot supply: %d\n", ret); > + return ret; > + } > + } > + > + if (pcie->slot_ctl_12v) { > + ret = regulator_enable(pcie->slot_ctl_12v); > + if (ret < 0) { > + dev_err(pcie->dev, > + "Failed to enable 12V slot supply: %d\n", ret); > + goto fail_12v_enable; > + } > + } > + > + /* > + * According to PCI Express Card Electromechanical Specification > + * Revision 1.1, Table-2.4, T_PVPERL (Power stable to PERST# inactive) > + * should be a minimum of 100ms. > + */ > + msleep(100); > + > + return 0; > + > +fail_12v_enable: > + if (pcie->slot_ctl_3v3) > + regulator_disable(pcie->slot_ctl_3v3); > + return ret; > +} > + > +static void tegra_pcie_disable_slot_regulators(struct tegra_pcie_dw *pcie) > +{ > + if (pcie->slot_ctl_12v) > + regulator_disable(pcie->slot_ctl_12v); > + if (pcie->slot_ctl_3v3) > + regulator_disable(pcie->slot_ctl_3v3); > +} > + > static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie, > bool en_hw_hot_rst) > { > @@ -1060,6 +1128,10 @@ static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie, > return ret; > } > > + ret = tegra_pcie_enable_slot_regulators(pcie); > + if (ret < 0) > + goto fail_slot_reg_en; > + > ret = regulator_enable(pcie->pex_ctl_supply); > if (ret < 0) { > dev_err(pcie->dev, "Failed to enable regulator: %d\n", ret); > @@ -1142,6 +1214,8 @@ static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie, > fail_core_clk: > regulator_disable(pcie->pex_ctl_supply); > fail_reg_en: > + tegra_pcie_disable_slot_regulators(pcie); > +fail_slot_reg_en: > tegra_pcie_bpmp_set_ctrl_state(pcie, false); > > return ret; > @@ -1174,6 +1248,8 @@ static int __deinit_controller(struct tegra_pcie_dw *pcie) > return ret; > } > > + tegra_pcie_disable_slot_regulators(pcie); > + > ret = tegra_pcie_bpmp_set_ctrl_state(pcie, false); > if (ret) { > dev_err(pcie->dev, "Failed to disable controller %d: %d\n", > @@ -1373,6 +1449,10 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev) > return ret; > } > > + ret = tegra_pcie_get_slot_regulators(pcie); > + if (ret < 0) > + return ret; All of the functions called from tegra_pcie_dw_probe appear to dev_err if something goes wrong, is there any reason why you haven't done that here? Thanks, Andrew Murray > + > pcie->pex_ctl_supply = devm_regulator_get(dev, "vddio-pex-ctl"); > if (IS_ERR(pcie->pex_ctl_supply)) { > dev_err(dev, "Failed to get regulator: %ld\n", > -- > 2.17.1 >
On Wed, Aug 28, 2019 at 06:45:03PM +0530, Vidya Sagar wrote: > Add support to get regulator information of 3.3V and 12V supplies of a PCIe > slot from the respective controller's device-tree node and enable those > supplies. This is required in platforms like p2972-0000 where the supplies > to x16 slot owned by C5 controller need to be enabled before attempting to > enumerate the devices. > > Signed-off-by: Vidya Sagar <vidyas@nvidia.com> > --- > V2: > * Addressed review comments from Thierry Reding and Andrew Murray > * Handled failure case of devm_regulator_get_optional() for -ENODEV cleanly > > drivers/pci/controller/dwc/pcie-tegra194.c | 80 ++++++++++++++++++++++ > 1 file changed, 80 insertions(+) > > diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c > index 057ba4f9fbcd..6a66101ec83d 100644 > --- a/drivers/pci/controller/dwc/pcie-tegra194.c > +++ b/drivers/pci/controller/dwc/pcie-tegra194.c > @@ -278,6 +278,8 @@ struct tegra_pcie_dw { > u32 aspm_l0s_enter_lat; > > struct regulator *pex_ctl_supply; > + struct regulator *slot_ctl_3v3; > + struct regulator *slot_ctl_12v; > > unsigned int phy_count; > struct phy **phys; > @@ -1047,6 +1049,72 @@ static void tegra_pcie_downstream_dev_to_D0(struct tegra_pcie_dw *pcie) > } > } > > +static int tegra_pcie_get_slot_regulators(struct tegra_pcie_dw *pcie) > +{ > + pcie->slot_ctl_3v3 = devm_regulator_get_optional(pcie->dev, "vpcie3v3"); > + if (IS_ERR(pcie->slot_ctl_3v3)) { > + if (PTR_ERR(pcie->slot_ctl_3v3) != -ENODEV) > + return PTR_ERR(pcie->slot_ctl_3v3); > + > + pcie->slot_ctl_3v3 = NULL; > + } > + > + pcie->slot_ctl_12v = devm_regulator_get_optional(pcie->dev, "vpcie12v"); > + if (IS_ERR(pcie->slot_ctl_12v)) { > + if (PTR_ERR(pcie->slot_ctl_12v) != -ENODEV) > + return PTR_ERR(pcie->slot_ctl_12v); > + > + pcie->slot_ctl_12v = NULL; > + } > + > + return 0; > +} > + > +static int tegra_pcie_enable_slot_regulators(struct tegra_pcie_dw *pcie) > +{ > + int ret; > + > + if (pcie->slot_ctl_3v3) { > + ret = regulator_enable(pcie->slot_ctl_3v3); > + if (ret < 0) { > + dev_err(pcie->dev, > + "Failed to enable 3V3 slot supply: %d\n", ret); Nit: perhaps make this error message "Failed to enable 3.3V slot supply"? Seems somewhat more user-friendly than 3V3. > + return ret; > + } > + } > + > + if (pcie->slot_ctl_12v) { > + ret = regulator_enable(pcie->slot_ctl_12v); > + if (ret < 0) { > + dev_err(pcie->dev, > + "Failed to enable 12V slot supply: %d\n", ret); > + goto fail_12v_enable; > + } > + } > + > + /* > + * According to PCI Express Card Electromechanical Specification > + * Revision 1.1, Table-2.4, T_PVPERL (Power stable to PERST# inactive) > + * should be a minimum of 100ms. > + */ > + msleep(100); Do you perhaps want to guard this with something like: if (pcie->slot_ctl_3v3 || pcie->slot_ctl_12v) ? Doesn't seem useful to me to sleep 100 ms here if there are no regulators being enabled to begin with. Thierry > + > + return 0; > + > +fail_12v_enable: > + if (pcie->slot_ctl_3v3) > + regulator_disable(pcie->slot_ctl_3v3); > + return ret; > +} > + > +static void tegra_pcie_disable_slot_regulators(struct tegra_pcie_dw *pcie) > +{ > + if (pcie->slot_ctl_12v) > + regulator_disable(pcie->slot_ctl_12v); > + if (pcie->slot_ctl_3v3) > + regulator_disable(pcie->slot_ctl_3v3); > +} > + > static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie, > bool en_hw_hot_rst) > { > @@ -1060,6 +1128,10 @@ static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie, > return ret; > } > > + ret = tegra_pcie_enable_slot_regulators(pcie); > + if (ret < 0) > + goto fail_slot_reg_en; > + > ret = regulator_enable(pcie->pex_ctl_supply); > if (ret < 0) { > dev_err(pcie->dev, "Failed to enable regulator: %d\n", ret); > @@ -1142,6 +1214,8 @@ static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie, > fail_core_clk: > regulator_disable(pcie->pex_ctl_supply); > fail_reg_en: > + tegra_pcie_disable_slot_regulators(pcie); > +fail_slot_reg_en: > tegra_pcie_bpmp_set_ctrl_state(pcie, false); > > return ret; > @@ -1174,6 +1248,8 @@ static int __deinit_controller(struct tegra_pcie_dw *pcie) > return ret; > } > > + tegra_pcie_disable_slot_regulators(pcie); > + > ret = tegra_pcie_bpmp_set_ctrl_state(pcie, false); > if (ret) { > dev_err(pcie->dev, "Failed to disable controller %d: %d\n", > @@ -1373,6 +1449,10 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev) > return ret; > } > > + ret = tegra_pcie_get_slot_regulators(pcie); > + if (ret < 0) > + return ret; > + > pcie->pex_ctl_supply = devm_regulator_get(dev, "vddio-pex-ctl"); > if (IS_ERR(pcie->pex_ctl_supply)) { > dev_err(dev, "Failed to get regulator: %ld\n", > -- > 2.17.1 >
diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c index 057ba4f9fbcd..6a66101ec83d 100644 --- a/drivers/pci/controller/dwc/pcie-tegra194.c +++ b/drivers/pci/controller/dwc/pcie-tegra194.c @@ -278,6 +278,8 @@ struct tegra_pcie_dw { u32 aspm_l0s_enter_lat; struct regulator *pex_ctl_supply; + struct regulator *slot_ctl_3v3; + struct regulator *slot_ctl_12v; unsigned int phy_count; struct phy **phys; @@ -1047,6 +1049,72 @@ static void tegra_pcie_downstream_dev_to_D0(struct tegra_pcie_dw *pcie) } } +static int tegra_pcie_get_slot_regulators(struct tegra_pcie_dw *pcie) +{ + pcie->slot_ctl_3v3 = devm_regulator_get_optional(pcie->dev, "vpcie3v3"); + if (IS_ERR(pcie->slot_ctl_3v3)) { + if (PTR_ERR(pcie->slot_ctl_3v3) != -ENODEV) + return PTR_ERR(pcie->slot_ctl_3v3); + + pcie->slot_ctl_3v3 = NULL; + } + + pcie->slot_ctl_12v = devm_regulator_get_optional(pcie->dev, "vpcie12v"); + if (IS_ERR(pcie->slot_ctl_12v)) { + if (PTR_ERR(pcie->slot_ctl_12v) != -ENODEV) + return PTR_ERR(pcie->slot_ctl_12v); + + pcie->slot_ctl_12v = NULL; + } + + return 0; +} + +static int tegra_pcie_enable_slot_regulators(struct tegra_pcie_dw *pcie) +{ + int ret; + + if (pcie->slot_ctl_3v3) { + ret = regulator_enable(pcie->slot_ctl_3v3); + if (ret < 0) { + dev_err(pcie->dev, + "Failed to enable 3V3 slot supply: %d\n", ret); + return ret; + } + } + + if (pcie->slot_ctl_12v) { + ret = regulator_enable(pcie->slot_ctl_12v); + if (ret < 0) { + dev_err(pcie->dev, + "Failed to enable 12V slot supply: %d\n", ret); + goto fail_12v_enable; + } + } + + /* + * According to PCI Express Card Electromechanical Specification + * Revision 1.1, Table-2.4, T_PVPERL (Power stable to PERST# inactive) + * should be a minimum of 100ms. + */ + msleep(100); + + return 0; + +fail_12v_enable: + if (pcie->slot_ctl_3v3) + regulator_disable(pcie->slot_ctl_3v3); + return ret; +} + +static void tegra_pcie_disable_slot_regulators(struct tegra_pcie_dw *pcie) +{ + if (pcie->slot_ctl_12v) + regulator_disable(pcie->slot_ctl_12v); + if (pcie->slot_ctl_3v3) + regulator_disable(pcie->slot_ctl_3v3); +} + static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie, bool en_hw_hot_rst) { @@ -1060,6 +1128,10 @@ static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie, return ret; } + ret = tegra_pcie_enable_slot_regulators(pcie); + if (ret < 0) + goto fail_slot_reg_en; + ret = regulator_enable(pcie->pex_ctl_supply); if (ret < 0) { dev_err(pcie->dev, "Failed to enable regulator: %d\n", ret); @@ -1142,6 +1214,8 @@ static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie, fail_core_clk: regulator_disable(pcie->pex_ctl_supply); fail_reg_en: + tegra_pcie_disable_slot_regulators(pcie); +fail_slot_reg_en: tegra_pcie_bpmp_set_ctrl_state(pcie, false); return ret; @@ -1174,6 +1248,8 @@ static int __deinit_controller(struct tegra_pcie_dw *pcie) return ret; } + tegra_pcie_disable_slot_regulators(pcie); + ret = tegra_pcie_bpmp_set_ctrl_state(pcie, false); if (ret) { dev_err(pcie->dev, "Failed to disable controller %d: %d\n", @@ -1373,6 +1449,10 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev) return ret; } + ret = tegra_pcie_get_slot_regulators(pcie); + if (ret < 0) + return ret; + pcie->pex_ctl_supply = devm_regulator_get(dev, "vddio-pex-ctl"); if (IS_ERR(pcie->pex_ctl_supply)) { dev_err(dev, "Failed to get regulator: %ld\n",
Add support to get regulator information of 3.3V and 12V supplies of a PCIe slot from the respective controller's device-tree node and enable those supplies. This is required in platforms like p2972-0000 where the supplies to x16 slot owned by C5 controller need to be enabled before attempting to enumerate the devices. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> --- V2: * Addressed review comments from Thierry Reding and Andrew Murray * Handled failure case of devm_regulator_get_optional() for -ENODEV cleanly drivers/pci/controller/dwc/pcie-tegra194.c | 80 ++++++++++++++++++++++ 1 file changed, 80 insertions(+)