diff mbox series

[RFC,2/5] ARM: dts: add support for opp-v2 for omap34xx and omap36xx

Message ID d0dc1623ed6b1bd657f169dc2b4482b269bdba37.1567421751.git.hns@goldelico.com (mailing list archive)
State New, archived
Headers show
Series OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits | expand

Commit Message

H. Nikolaus Schaller Sept. 2, 2019, 10:55 a.m. UTC 
In addition, move omap3 from whitelist to blacklist in cpufreq-dt-platdev
in the same patch, because doing either first breaks operation and
may make trouble in bisect.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
 arch/arm/boot/dts/omap34xx.dtsi      | 59 +++++++++++++++++++++++-----
 arch/arm/boot/dts/omap36xx.dtsi      | 47 ++++++++++++++++++----
 drivers/cpufreq/cpufreq-dt-platdev.c |  2 +-
 3 files changed, 90 insertions(+), 18 deletions(-)

Comments

Viresh Kumar Sept. 3, 2019, 2:38 a.m. UTC | #1 
On 02-09-19, 12:55, H. Nikolaus Schaller wrote:
> +		opp1-125000000 {
> +			opp-hz = /bits/ 64 <125000000>;
> +			// we currently only select the max voltage from table Table 3-3 of the omap3530 Data sheet (SPRS507F)
> +			// <target min max> could also be single <target>
> +			opp-microvolt = <975000 975000 975000>;
> +			// first value is silicon revision, second one 720MHz Device Identification

> +			opp-supported-hw = <0xffffffff 3>;

I don't see the driver changes using this field, am I missing
something ?
Viresh Kumar Sept. 3, 2019, 2:39 a.m. UTC | #2 
On 03-09-19, 08:08, Viresh Kumar wrote:
> On 02-09-19, 12:55, H. Nikolaus Schaller wrote:
> > +		opp1-125000000 {
> > +			opp-hz = /bits/ 64 <125000000>;
> > +			// we currently only select the max voltage from table Table 3-3 of the omap3530 Data sheet (SPRS507F)
> > +			// <target min max> could also be single <target>
> > +			opp-microvolt = <975000 975000 975000>;
> > +			// first value is silicon revision, second one 720MHz Device Identification
> 
> > +			opp-supported-hw = <0xffffffff 3>;
> 
> I don't see the driver changes using this field, am I missing
> something ?

The driver already had them it seems. Hmm..
H. Nikolaus Schaller Sept. 3, 2019, 5:58 a.m. UTC | #3 
> Am 03.09.2019 um 04:38 schrieb Viresh Kumar <viresh.kumar@linaro.org>:
> 
> On 02-09-19, 12:55, H. Nikolaus Schaller wrote:
>> +		opp1-125000000 {
>> +			opp-hz = /bits/ 64 <125000000>;
>> +			// we currently only select the max voltage from table Table 3-3 of the omap3530 Data sheet (SPRS507F)
>> +			// <target min max> could also be single <target>
>> +			opp-microvolt = <975000 975000 975000>;
>> +			// first value is silicon revision, second one 720MHz Device Identification
> 
>> +			opp-supported-hw = <0xffffffff 3>;
> 
> I don't see the driver changes using this field, am I missing
> something ?

This is parsed by _opp_is_supported() which is called
indirectly by ti_cpufreq_probe().

BR,
Nikolaus
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index f572a477f74c..b92645d6d981 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -16,19 +16,60 @@ 
 / {
 	cpus {
 		cpu: cpu@0 {
-			/* OMAP343x/OMAP35xx variants OPP1-5 */
-			operating-points = <
-				/* kHz    uV */
-				125000   975000
-				250000  1075000
-				500000  1200000
-				550000  1270000
-				600000  1350000
-			>;
+			/* OMAP343x/OMAP35xx variants OPP1-6 */
+			operating-points-v2 = <&cpu0_opp_table>;
+
 			clock-latency = <300000>; /* From legacy driver */
 		};
 	};
 
+	/* see Documentation/devicetree/bindings/opp/opp.txt */
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		syscon = <&scm_conf>;
+
+		opp1-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			// we currently only select the max voltage from table Table 3-3 of the omap3530 Data sheet (SPRS507F)
+			// <target min max> could also be single <target>
+			opp-microvolt = <975000 975000 975000>;
+			// first value is silicon revision, second one 720MHz Device Identification
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp2-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <1075000 1075000 1075000>;
+			opp-supported-hw = <0xffffffff 3>;
+			opp-suspend;
+		};
+
+		opp3-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <1200000 1200000 1200000>;
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp4-550000000 {
+			opp-hz = /bits/ 64 <550000000>;
+			opp-microvolt = <1270000 1270000 1270000>;
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp5-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp6-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1350000 1350000 1350000>;
+			/* only high-speed grade omap3530 devices */
+			opp-supported-hw = <0xffffffff 2>;
+		};
+	};
+
 	ocp@68000000 {
 		omap3_pmx_core2: pinmux@480025d8 {
 			compatible = "ti,omap3-padconf", "pinctrl-single";
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 6fb23ada1f64..1595814585df 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -19,15 +19,46 @@ 
 	};
 
 	cpus {
-		/* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */
+		/* OMAP3630/OMAP37xx variants OPP50 to OPP130 and OPP1G */
 		cpu: cpu@0 {
-			operating-points = <
-				/* kHz    uV */
-				300000  1012500
-				600000  1200000
-				800000  1325000
-			>;
-			clock-latency = <300000>; /* From legacy driver */
+			operating-points-v2 = <&cpu0_opp_table>;
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+		};
+	};
+
+	/* see Documentation/devicetree/bindings/opp/opp.txt */
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		syscon = <&scm_conf>;
+
+		opp50-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			// we currently only select the max voltage from table Table 4-19 of the DM3730 Data sheet (SPRS685B)
+			// <target min max> could also be single <target>
+			opp-microvolt = <1012500 1012500 1012500>;
+			// first value is silicon revision, second one is "speed binned
+			opp-supported-hw = <0xffffffff 3>;
+			opp-suspend;
+		};
+
+		opp100-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1200000 1200000 1200000>;
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp130-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1325000 1325000 1325000>;
+			opp-supported-hw = <0xffffffff 3>;
+		};
+
+		opp1g-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1375000 1375000 1375000>;
+			/* only on am/dm37x with speed-binned bit set */
+			opp-supported-hw = <0xffffffff 2>;
 		};
 	};
 
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 03dc4244ab00..68b7fc4225f8 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -86,7 +86,6 @@  static const struct of_device_id whitelist[] __initconst = {
 	{ .compatible = "st-ericsson,u9540", },
 
 	{ .compatible = "ti,omap2", },
-	{ .compatible = "ti,omap3", },
 	{ .compatible = "ti,omap4", },
 	{ .compatible = "ti,omap5", },
 
@@ -132,6 +131,7 @@  static const struct of_device_id blacklist[] __initconst = {
 	{ .compatible = "ti,am33xx", },
 	{ .compatible = "ti,am43", },
 	{ .compatible = "ti,dra7", },
+	{ .compatible = "ti,omap3", },
 
 	{ }
 };