diff mbox series

[4/4] arm64: dts: add support for A1 based Amlogic AD401

Message ID 1567493475-75451-5-git-send-email-jianxin.pan@amlogic.com (mailing list archive)
State New, archived
Headers show
Series arm64: Add basic support for Amlogic A1 SoC Family | expand

Commit Message

Jianxin Pan Sept. 3, 2019, 6:51 a.m. UTC
Add basic support for the Amlogic A1 based Amlogic AD401 board:
which describe components as follows: Reserve Memory, CPU, GIC, IRQ,
Timer, UART. It's capable of booting up into the serial console.

Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/Makefile           |   1 +
 arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts |  30 ++++++
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi      | 121 +++++++++++++++++++++++++
 3 files changed, 152 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-a1.dtsi

Comments

Jerome Brunet Sept. 3, 2019, 7:30 a.m. UTC | #1
On Tue 03 Sep 2019 at 02:51, Jianxin Pan <jianxin.pan@amlogic.com> wrote:

> Add basic support for the Amlogic A1 based Amlogic AD401 board:
> which describe components as follows: Reserve Memory, CPU, GIC, IRQ,
> Timer, UART. It's capable of booting up into the serial console.
>
> Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
> ---
>  arch/arm64/boot/dts/amlogic/Makefile           |   1 +
>  arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts |  30 ++++++
>  arch/arm64/boot/dts/amlogic/meson-a1.dtsi      | 121 +++++++++++++++++++++++++
>  3 files changed, 152 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-a1.dtsi
>
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index edbf128..1720c45 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -36,3 +36,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
> new file mode 100644
> index 00000000..3c05cc0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
> @@ -0,0 +1,30 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-a1.dtsi"
> +
> +/ {
> +	compatible = "amlogic,ad401", "amlogic,a1";
> +	model = "Amlogic Meson A1 AD401 Development Board";
> +
> +	aliases {
> +		serial0 = &uart_AO_B;
> +	};

Newline here please

> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};

same

> +	memory@0 {
> +		device_type = "memory";
> +		linux,usable-memory = <0x0 0x0 0x0 0x8000000>;
> +	};
> +};
> +
> +&uart_AO_B {
> +	status = "okay";
> +	/*pinctrl-0 = <&uart_ao_a_pins>;*/
> +	/*pinctrl-names = "default";*/

Remove the commented code please

> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
> new file mode 100644
> index 00000000..b98d648
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
> @@ -0,0 +1,121 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +	compatible = "amlogic,a1";
> +
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	cpus {
> +		#address-cells = <0x2>;
> +		#size-cells = <0x0>;
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35";
> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +			next-level-cache = <&l2>;
> +		};
> +
> +		cpu1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35";
> +			reg = <0x0 0x1>;
> +			enable-method = "psci";
> +			next-level-cache = <&l2>;
> +		};
> +
> +		l2: l2-cache0 {
> +			compatible = "cache";
> +		};
> +	};

New line here please

With this minor comments adressed, looks good.

Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>

> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		linux,cma {
> +			compatible = "shared-dma-pool";
> +			reusable;
> +			size = <0x0 0x800000>;
> +			alignment = <0x0 0x400000>;
> +			linux,cma-default;
> +		};
> +	};
> +
> +	sm: secure-monitor {
> +		compatible = "amlogic,meson-gxbb-sm";
> +	};
> +
> +	soc {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		uart_AO: serial@fe001c00 {
> +			compatible = "amlogic,meson-gx-uart",
> +				     "amlogic,meson-ao-uart";
> +			reg = <0x0 0xfe001c00 0x0 0x18>;
> +			interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
> +			clocks = <&xtal>, <&xtal>, <&xtal>;
> +			clock-names = "xtal", "pclk", "baud";
> +			status = "disabled";
> +		};
> +
> +		uart_AO_B: serial@fe002000 {
> +			compatible = "amlogic,meson-gx-uart",
> +				     "amlogic,meson-ao-uart";
> +				     reg = <0x0 0xfe002000 0x0 0x18>;
> +			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
> +			clocks = <&xtal>, <&xtal>, <&xtal>;
> +			clock-names = "xtal", "pclk", "baud";
> +			status = "disabled";
> +		};
> +
> +		gic: interrupt-controller@ff901000 {
> +			compatible = "arm,gic-400";
> +			reg = <0x0 0xff901000 0x0 0x1000>,
> +			      <0x0 0xff902000 0x0 0x2000>,
> +			      <0x0 0xff904000 0x0 0x2000>,
> +			      <0x0 0xff906000 0x0 0x2000>;
> +			interrupt-controller;
> +			interrupts = <GIC_PPI 9
> +				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
> +			#interrupt-cells = <3>;
> +			#address-cells = <0>;
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13
> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14
> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11
> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10
> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
> +	};
> +
> +	xtal: xtal-clk {
> +		compatible = "fixed-clock";
> +		clock-frequency = <24000000>;
> +		clock-output-names = "xtal";
> +		#clock-cells = <0>;
> +	};
> +};
> -- 
> 2.7.4
Neil Armstrong Sept. 3, 2019, 7:42 a.m. UTC | #2
Hi,

On 03/09/2019 08:51, Jianxin Pan wrote:
> Add basic support for the Amlogic A1 based Amlogic AD401 board:
> which describe components as follows: Reserve Memory, CPU, GIC, IRQ,
> Timer, UART. It's capable of booting up into the serial console.
> 
> Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
> ---
>  arch/arm64/boot/dts/amlogic/Makefile           |   1 +
>  arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts |  30 ++++++
>  arch/arm64/boot/dts/amlogic/meson-a1.dtsi      | 121 +++++++++++++++++++++++++
>  3 files changed, 152 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-a1.dtsi
> 
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index edbf128..1720c45 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -36,3 +36,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
> new file mode 100644
> index 00000000..3c05cc0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
> @@ -0,0 +1,30 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-a1.dtsi"
> +
> +/ {
> +	compatible = "amlogic,ad401", "amlogic,a1";
> +	model = "Amlogic Meson A1 AD401 Development Board";
> +
> +	aliases {
> +		serial0 = &uart_AO_B;
> +	};
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +	memory@0 {
> +		device_type = "memory";
> +		linux,usable-memory = <0x0 0x0 0x0 0x8000000>;

I'll prefer usage of reg, it's handled the same but linux,usable-memory
is not documented.

> +	};
> +};
> +
> +&uart_AO_B {
> +	status = "okay";
> +	/*pinctrl-0 = <&uart_ao_a_pins>;*/
> +	/*pinctrl-names = "default";*/

Please remove these lines instead of commenting them.

> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
> new file mode 100644
> index 00000000..b98d648
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
> @@ -0,0 +1,121 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +	compatible = "amlogic,a1";
> +
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	cpus {
> +		#address-cells = <0x2>;
> +		#size-cells = <0x0>;
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35";
> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +			next-level-cache = <&l2>;
> +		};
> +
> +		cpu1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35";
> +			reg = <0x0 0x1>;
> +			enable-method = "psci";
> +			next-level-cache = <&l2>;
> +		};
> +
> +		l2: l2-cache0 {
> +			compatible = "cache";
> +		};
> +	};
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;

Isn't there secmon reserved memory ?

> +
> +		linux,cma {
> +			compatible = "shared-dma-pool";
> +			reusable;
> +			size = <0x0 0x800000>;
> +			alignment = <0x0 0x400000>;
> +			linux,cma-default;
> +		};
> +	};
> +
> +	sm: secure-monitor {
> +		compatible = "amlogic,meson-gxbb-sm";
> +	};
> +
> +	soc {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		uart_AO: serial@fe001c00 {
> +			compatible = "amlogic,meson-gx-uart",
> +				     "amlogic,meson-ao-uart";
> +			reg = <0x0 0xfe001c00 0x0 0x18>;
> +			interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
> +			clocks = <&xtal>, <&xtal>, <&xtal>;
> +			clock-names = "xtal", "pclk", "baud";
> +			status = "disabled";
> +		};
> +
> +		uart_AO_B: serial@fe002000 {
> +			compatible = "amlogic,meson-gx-uart",
> +				     "amlogic,meson-ao-uart";
> +				     reg = <0x0 0xfe002000 0x0 0x18>;
> +			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
> +			clocks = <&xtal>, <&xtal>, <&xtal>;
> +			clock-names = "xtal", "pclk", "baud";
> +			status = "disabled";
> +		};
> +
> +		gic: interrupt-controller@ff901000 {
> +			compatible = "arm,gic-400";
> +			reg = <0x0 0xff901000 0x0 0x1000>,
> +			      <0x0 0xff902000 0x0 0x2000>,
> +			      <0x0 0xff904000 0x0 0x2000>,
> +			      <0x0 0xff906000 0x0 0x2000>;
> +			interrupt-controller;
> +			interrupts = <GIC_PPI 9
> +				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
> +			#interrupt-cells = <3>;
> +			#address-cells = <0>;
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13
> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14
> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11
> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10
> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
> +	};
> +
> +	xtal: xtal-clk {
> +		compatible = "fixed-clock";
> +		clock-frequency = <24000000>;
> +		clock-output-names = "xtal";
> +		#clock-cells = <0>;
> +	};
> +};
> 

Thanks,
Neil
Jianxin Pan Sept. 3, 2019, 8 a.m. UTC | #3
Hi Jerome,

Thanks for your suggestion.

I will fix them in the next version.


On 2019/9/3 15:30, Jerome Brunet wrote:
> On Tue 03 Sep 2019 at 02:51, Jianxin Pan <jianxin.pan@amlogic.com> wrote:
> 
>> Add basic support for the Amlogic A1 based Amlogic AD401 board:
>> which describe components as follows: Reserve Memory, CPU, GIC, IRQ,
>> Timer, UART. It's capable of booting up into the serial console.
>>
>> Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
>> ---
>>  arch/arm64/boot/dts/amlogic/Makefile           |   1 +
>>  arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts |  30 ++++++
>>  arch/arm64/boot/dts/amlogic/meson-a1.dtsi      | 121 +++++++++++++++++++++++++
>>  3 files changed, 152 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
>>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-a1.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>> index edbf128..1720c45 100644
>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>> @@ -36,3 +36,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
>>  dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
>>  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>>  dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
>> +dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
>> new file mode 100644
>> index 00000000..3c05cc0
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
>> @@ -0,0 +1,30 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "meson-a1.dtsi"
>> +
>> +/ {
>> +	compatible = "amlogic,ad401", "amlogic,a1";
>> +	model = "Amlogic Meson A1 AD401 Development Board";
>> +
>> +	aliases {
>> +		serial0 = &uart_AO_B;
>> +	};
> 
> Newline here please
> 
>> +	chosen {
>> +		stdout-path = "serial0:115200n8";
>> +	};
> 
> same
> 
>> +	memory@0 {
>> +		device_type = "memory";
>> +		linux,usable-memory = <0x0 0x0 0x0 0x8000000>;
>> +	};
>> +};
>> +
>> +&uart_AO_B {
>> +	status = "okay";
>> +	/*pinctrl-0 = <&uart_ao_a_pins>;*/
>> +	/*pinctrl-names = "default";*/
> 
> Remove the commented code please
> 
>> +};
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
>> new file mode 100644
>> index 00000000..b98d648
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
>> @@ -0,0 +1,121 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> +/ {
>> +	compatible = "amlogic,a1";
>> +
>> +	interrupt-parent = <&gic>;
>> +	#address-cells = <2>;
>> +	#size-cells = <2>;
>> +
>> +	cpus {
>> +		#address-cells = <0x2>;
>> +		#size-cells = <0x0>;
>> +
>> +		cpu0: cpu@0 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a35";
>> +			reg = <0x0 0x0>;
>> +			enable-method = "psci";
>> +			next-level-cache = <&l2>;
>> +		};
>> +
>> +		cpu1: cpu@1 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a35";
>> +			reg = <0x0 0x1>;
>> +			enable-method = "psci";
>> +			next-level-cache = <&l2>;
>> +		};
>> +
>> +		l2: l2-cache0 {
>> +			compatible = "cache";
>> +		};
>> +	};
> 
> New line here please
> 
> With this minor comments adressed, looks good.
> 
> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
> 
>> +	psci {
>> +		compatible = "arm,psci-1.0";
>> +		method = "smc";
>> +	};
>> +
>> +	reserved-memory {
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		ranges;
>> +
>> +		linux,cma {
>> +			compatible = "shared-dma-pool";
>> +			reusable;
>> +			size = <0x0 0x800000>;
>> +			alignment = <0x0 0x400000>;
>> +			linux,cma-default;
>> +		};
>> +	};
>> +
>> +	sm: secure-monitor {
>> +		compatible = "amlogic,meson-gxbb-sm";
>> +	};
>> +
>> +	soc {
>> +		compatible = "simple-bus";
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		ranges;
>> +
>> +		uart_AO: serial@fe001c00 {
>> +			compatible = "amlogic,meson-gx-uart",
>> +				     "amlogic,meson-ao-uart";
>> +			reg = <0x0 0xfe001c00 0x0 0x18>;
>> +			interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
>> +			clocks = <&xtal>, <&xtal>, <&xtal>;
>> +			clock-names = "xtal", "pclk", "baud";
>> +			status = "disabled";
>> +		};
>> +
>> +		uart_AO_B: serial@fe002000 {
>> +			compatible = "amlogic,meson-gx-uart",
>> +				     "amlogic,meson-ao-uart";
>> +				     reg = <0x0 0xfe002000 0x0 0x18>;
>> +			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
>> +			clocks = <&xtal>, <&xtal>, <&xtal>;
>> +			clock-names = "xtal", "pclk", "baud";
>> +			status = "disabled";
>> +		};
>> +
>> +		gic: interrupt-controller@ff901000 {
>> +			compatible = "arm,gic-400";
>> +			reg = <0x0 0xff901000 0x0 0x1000>,
>> +			      <0x0 0xff902000 0x0 0x2000>,
>> +			      <0x0 0xff904000 0x0 0x2000>,
>> +			      <0x0 0xff906000 0x0 0x2000>;
>> +			interrupt-controller;
>> +			interrupts = <GIC_PPI 9
>> +				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
>> +			#interrupt-cells = <3>;
>> +			#address-cells = <0>;
>> +		};
>> +	};
>> +
>> +	timer {
>> +		compatible = "arm,armv8-timer";
>> +		interrupts = <GIC_PPI 13
>> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
>> +			     <GIC_PPI 14
>> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
>> +			     <GIC_PPI 11
>> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
>> +			     <GIC_PPI 10
>> +			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
>> +	};
>> +
>> +	xtal: xtal-clk {
>> +		compatible = "fixed-clock";
>> +		clock-frequency = <24000000>;
>> +		clock-output-names = "xtal";
>> +		#clock-cells = <0>;
>> +	};
>> +};
>> -- 
>> 2.7.4
> 
> .
>
Jianxin Pan Sept. 3, 2019, 8:16 a.m. UTC | #4
Hi Neil,

Thanks for your time.
Please see my comments below.

On 2019/9/3 15:42, Neil Armstrong wrote:
> Hi,
> 
> On 03/09/2019 08:51, Jianxin Pan wrote:
>> Add basic support for the Amlogic A1 based Amlogic AD401 board:
>> which describe components as follows: Reserve Memory, CPU, GIC, IRQ,
[...]
>> +	chosen {
>> +		stdout-path = "serial0:115200n8";
>> +	};
>> +	memory@0 {
>> +		device_type = "memory";
>> +		linux,usable-memory = <0x0 0x0 0x0 0x8000000>;
> 
> I'll prefer usage of reg, it's handled the same but linux,usable-memory
> is not documented.
> 
OK, I will fix it in the next version. Thanks for your review.
>> +	};
>> +};
>> +
>> +&uart_AO_B {
>> +	status = "okay";
>> +	/*pinctrl-0 = <&uart_ao_a_pins>;*/
>> +	/*pinctrl-names = "default";*/
> 
> Please remove these lines instead of commenting them.
> 
OK, I will fix it in the next version.
>> +};
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
>> new file mode 100644
>> index 00000000..b98d648
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
>> @@ -0,0 +1,121 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> +/ {
[...]
>> +
>> +	reserved-memory {
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		ranges;
> 
> Isn't there secmon reserved memory ?
> 
A1 uses internal SRAM as secmon memory.
And there is no secmon reserved memory in ddr side.
>> +
>> +		linux,cma {
>> +			compatible = "shared-dma-pool";
>> +			reusable;
>> +			size = <0x0 0x800000>;
[...]
>>
> 
> Thanks,
> Neil
> 
> .
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index edbf128..1720c45 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -36,3 +36,4 @@  dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
new file mode 100644
index 00000000..3c05cc0
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
@@ -0,0 +1,30 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-a1.dtsi"
+
+/ {
+	compatible = "amlogic,ad401", "amlogic,a1";
+	model = "Amlogic Meson A1 AD401 Development Board";
+
+	aliases {
+		serial0 = &uart_AO_B;
+	};
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+	memory@0 {
+		device_type = "memory";
+		linux,usable-memory = <0x0 0x0 0x0 0x8000000>;
+	};
+};
+
+&uart_AO_B {
+	status = "okay";
+	/*pinctrl-0 = <&uart_ao_a_pins>;*/
+	/*pinctrl-names = "default";*/
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
new file mode 100644
index 00000000..b98d648
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -0,0 +1,121 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "amlogic,a1";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x800000>;
+			alignment = <0x0 0x400000>;
+			linux,cma-default;
+		};
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		uart_AO: serial@fe001c00 {
+			compatible = "amlogic,meson-gx-uart",
+				     "amlogic,meson-ao-uart";
+			reg = <0x0 0xfe001c00 0x0 0x18>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&xtal>, <&xtal>, <&xtal>;
+			clock-names = "xtal", "pclk", "baud";
+			status = "disabled";
+		};
+
+		uart_AO_B: serial@fe002000 {
+			compatible = "amlogic,meson-gx-uart",
+				     "amlogic,meson-ao-uart";
+				     reg = <0x0 0xfe002000 0x0 0x18>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&xtal>, <&xtal>, <&xtal>;
+			clock-names = "xtal", "pclk", "baud";
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@ff901000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xff901000 0x0 0x1000>,
+			      <0x0 0xff902000 0x0 0x2000>,
+			      <0x0 0xff904000 0x0 0x2000>,
+			      <0x0 0xff906000 0x0 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+};