[v6,0/3] Support mipitx for mt8183

Message

Jitao Shi Aug. 7, 2019, 8:46 a.m. UTC

Change since v5:
 - remove mipi_tx->ref_clk
 - remove mt8183 pll prepare unprepare

Change since v4:
 - fine tune the mipi_tx->ref_clk and mipi_tx->pll sequence
   1. Prepare mipi_tx->ref_clk
   2. Prepare mipi_tx->pll
   3. Enable mipi_tx->ref_clk
   4. Enable mipi_tx->pll

Changes since v3:
 - turn off PLL before setting PLL parameters.

Changes since v2:
 - update Acked-by: Rob Herring <[e-mail]>
 - update mt8183 max bit rate support

Changes since v1:
 - update dt-bindings document for mt8183 mipitx.
 - remove mtk_mipitx_clk_get_ops and assign clk_ops in probe.
 - fix the lincence
 - remove txdiv1 from mtk_mipi_tx_pll_prepare

Jitao Shi (3):
  dt-bindings: display: mediatek: update dsi supported chips
  drm/mediatek: separate mipi_tx to different file
  drm/mediatek: add mipi_tx driver for mt8183

 .../display/mediatek/mediatek,dsi.txt         |   4 +-
 drivers/gpu/drm/mediatek/Makefile             |   2 +
 drivers/gpu/drm/mediatek/mtk_mipi_tx.c        | 338 ++----------------
 drivers/gpu/drm/mediatek/mtk_mipi_tx.h        |  49 +++
 drivers/gpu/drm/mediatek/mtk_mt8173_mipi_tx.c | 289 +++++++++++++++
 drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 150 ++++++++
 6 files changed, 515 insertions(+), 317 deletions(-)
 create mode 100644 drivers/gpu/drm/mediatek/mtk_mipi_tx.h
 create mode 100644 drivers/gpu/drm/mediatek/mtk_mt8173_mipi_tx.c
 create mode 100644 drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c

Comments

CK Hu (胡俊光) Sept. 5, 2019, 2:38 a.m. UTC | #1

Hi, Jitao:

For this series, applied to mediatek-drm-next-5.5 [1], thanks.

[1]
https://github.com/ckhu-mediatek/linux.git-tags/commits/mediatek-drm-next-5.5

Regards,
CK

On Wed, 2019-08-07 at 16:46 +0800, Jitao Shi wrote:
> Change since v5:
>  - remove mipi_tx->ref_clk
>  - remove mt8183 pll prepare unprepare
> 
> Change since v4:
>  - fine tune the mipi_tx->ref_clk and mipi_tx->pll sequence
>    1. Prepare mipi_tx->ref_clk
>    2. Prepare mipi_tx->pll
>    3. Enable mipi_tx->ref_clk
>    4. Enable mipi_tx->pll
> 
> Changes since v3:
>  - turn off PLL before setting PLL parameters.
> 
> Changes since v2:
>  - update Acked-by: Rob Herring <[e-mail]>
>  - update mt8183 max bit rate support
> 
> Changes since v1:
>  - update dt-bindings document for mt8183 mipitx.
>  - remove mtk_mipitx_clk_get_ops and assign clk_ops in probe.
>  - fix the lincence
>  - remove txdiv1 from mtk_mipi_tx_pll_prepare
> 
> Jitao Shi (3):
>   dt-bindings: display: mediatek: update dsi supported chips
>   drm/mediatek: separate mipi_tx to different file
>   drm/mediatek: add mipi_tx driver for mt8183
> 
>  .../display/mediatek/mediatek,dsi.txt         |   4 +-
>  drivers/gpu/drm/mediatek/Makefile             |   2 +
>  drivers/gpu/drm/mediatek/mtk_mipi_tx.c        | 338 ++----------------
>  drivers/gpu/drm/mediatek/mtk_mipi_tx.h        |  49 +++
>  drivers/gpu/drm/mediatek/mtk_mt8173_mipi_tx.c | 289 +++++++++++++++
>  drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 150 ++++++++
>  6 files changed, 515 insertions(+), 317 deletions(-)
>  create mode 100644 drivers/gpu/drm/mediatek/mtk_mipi_tx.h
>  create mode 100644 drivers/gpu/drm/mediatek/mtk_mt8173_mipi_tx.c
>  create mode 100644 drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
>