[v3,16/16] ARM: dts: mmp3: Add MMP3 SoC dts file

Message ID	20190830220743.439670-17-lkundrak@v3.sk (mailing list archive)
State	Not Applicable, archived
Headers	show Return-Path: <SRS0=cuWe=W2=vger.kernel.org=linux-clk-owner@kernel.org> From: Lubomir Rintel <lkundrak@v3.sk> To: "To : Olof Johansson" <olof@lixom.net> Cc: "Cc : Rob Herring" <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Thomas Gleixner <tglx@linutronix.de>, Jason Cooper <jason@lakedaemon.net>, Kishon Vijay Abraham I <kishon@ti.com>, Russell King <linux@armlinux.org.uk>, Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@kernel.org>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org, Lubomir Rintel <lkundrak@v3.sk> Subject: [PATCH v3 16/16] ARM: dts: mmp3: Add MMP3 SoC dts file Date: Sat, 31 Aug 2019 00:07:43 +0200 Message-Id: <20190830220743.439670-17-lkundrak@v3.sk> In-Reply-To: <20190830220743.439670-1-lkundrak@v3.sk> References: <20190830220743.439670-1-lkundrak@v3.sk> MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Sender: linux-clk-owner@vger.kernel.org Precedence: bulk
Series	Initial support for Marvell MMP3 SoC \| expand [v3,00/16] Initial support for Marvell MMP3 SoC [v3,01/16] dt-bindings: arm: cpu: Add Marvell MMP3 SMP enable method [v3,02/16] dt-bindings: arm: Convert Marvell MMP board/soc bindings to json-schema [v3,03/16] dt-bindings: arm: mrvl: Document MMP3 compatible string [v3,04/16] dt-bindings: mrvl,intc: Add a MMP3 interrupt controller [v3,05/16] dt-bindings: phy-mmp3-usb: Add bindings [v3,06/16] ARM: l2c: add definition for FWA in PL310 aux register [v3,07/16] ARM: mmp: don't select CACHE_TAUROS2 on all ARCH_MMP [v3,08/16] ARM: mmp: map the PGU as well [v3,09/16] ARM: mmp: DT: convert timer driver to use TIMER_OF_DECLARE [v3,10/16] ARM: mmp: define MMP_CHIPID by the means of CIU_REG() [v3,11/16] ARM: mmp: add support for MMP3 SoC [v3,12/16] ARM: mmp: add SMP support [v3,13/16] ARM: mmp: move cputype.h to include/linux/soc/ [v3,14/16] ARM: mmp: remove MMP3 USB PHY registers from regs-usb.h [v3,15/16] phy: phy-mmp3-usb: add a new driver [v3,16/16] ARM: dts: mmp3: Add MMP3 SoC dts file

diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi new file mode 100644 index 0000000000000..5a6275257ebdd --- /dev/null +++ b/arch/arm/boot/dts/mmp3.dtsi @@ -0,0 +1,534 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk> + */ + +#include <dt-bindings/clock/marvell,mmp2.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "marvell,mmp3-smp"; + + cpu@0 { + compatible = "marvell,pj4b"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <0>; + }; + + cpu@1 { + compatible = "marvell,pj4b"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <1>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + axi@d4200000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd4200000 0x00200000>; + ranges; + + interrupt-controller@d4282000 { + compatible = "marvell,mmp3-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xd4282000 0x1000>, + <0xd4284000 0x100>; + mrvl,intc-nr-irqs = <64>; + }; + + pmic_mux: interrupt-controller@d4282150 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x150 0x4>, <0x168 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <4>; + }; + + rtc_mux: interrupt-controller@d4282154 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x154 0x4>, <0x16c 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + + hsi3_mux: interrupt-controller@d42821bc { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1bc 0x4>, <0x1a4 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <3>; + }; + + gpu_mux: interrupt-controller@d42821c0 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1c0 0x4>, <0x1a8 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <3>; + }; + + twsi_mux: interrupt-controller@d4282158 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x158 0x4>, <0x170 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <5>; + }; + + hsi2_mux: interrupt-controller@d42821c4 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1c4 0x4>, <0x1ac 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + + dxo_mux: interrupt-controller@d42821c8 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1c8 0x4>, <0x1b0 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + + misc1_mux: interrupt-controller@d428215c { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x15c 0x4>, <0x174 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <31>; + }; + + ci_mux: interrupt-controller@d42821cc { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1cc 0x4>, <0x1b4 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + + ssp_mux: interrupt-controller@d4282160 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x160 0x4>, <0x178 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <2>; + }; + + hsi1_mux: interrupt-controller@d4282184 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x184 0x4>, <0x17c 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <4>; + }; + + misc2_mux: interrupt-controller@d4282188 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x188 0x4>, <0x180 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <20>; + }; + + hsi0_mux: interrupt-controller@d42821d0 { + compatible = "mrvl,mmp2-mux-intc"; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x1d0 0x4>, <0x1b8 0x4>; + reg-names = "mux status", "mux mask"; + mrvl,intc-nr-irqs = <5>; + }; + + usb_otg_phy0: usb-otg-phy@d4207000 { + compatible = "marvell,mmp3-usb-phy"; + reg = <0xd4207000 0x40>; + #phy-cells = <0>; + status = "disabled"; + }; + + usb_otg0: usb-otg@d4208000 { + compatible = "marvell,pxau2o-ehci"; + reg = <0xd4208000 0x200>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_USB>; + clock-names = "USBCLK"; + phys = <&usb_otg_phy0>; + phy-names = "usb"; + status = "disabled"; + }; + + mmc1: mmc@d4280000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4280000 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH0>; + clock-names = "io"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc2: mmc@d4280800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4280800 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH1>; + clock-names = "io"; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc3: mmc@d4281000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4281000 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH2>; + clock-names = "io"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmc4: mmc@d4281800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4281800 0x120>; + clocks = <&soc_clocks MMP2_CLK_SDH3>; + clock-names = "io"; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + camera0: camera@d420a000 { + compatible = "marvell,mmp2-ccic"; + reg = <0xd420a000 0x800>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_CCIC0>; + clock-names = "axi"; + #clock-cells = <0>; + clock-output-names = "mclk"; + status = "disabled"; + }; + + camera1: camera@d420a800 { + compatible = "marvell,mmp2-ccic"; + reg = <0xd420a800 0x800>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_CCIC1>; + clock-names = "axi"; + #clock-cells = <0>; + clock-output-names = "mclk"; + status = "disabled"; + }; + }; + + apb@d4000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd4000000 0x00200000>; + ranges; + + timer: timer@d4014000 { + compatible = "mrvl,mmp-timer"; + reg = <0xd4014000 0x100>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_TIMER>; + }; + + uart1: uart@d4030000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4030000 0x1000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_UART0>; + resets = <&soc_clocks MMP2_CLK_UART0>; + reg-shift = <2>; + status = "disabled"; + }; + + uart2: uart@d4017000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4017000 0x1000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_UART1>; + resets = <&soc_clocks MMP2_CLK_UART1>; + reg-shift = <2>; + status = "disabled"; + }; + + uart3: uart@d4018000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4018000 0x1000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_UART2>; + resets = <&soc_clocks MMP2_CLK_UART2>; + reg-shift = <2>; + status = "disabled"; + }; + + uart4: uart@d4016000 { + compatible = "mrvl,mmp-uart"; + reg = <0xd4016000 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_UART3>; + resets = <&soc_clocks MMP2_CLK_UART3>; + reg-shift = <2>; + status = "disabled"; + }; + + gpio: gpio@d4019000 { + compatible = "marvell,mmp2-gpio"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xd4019000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpio_mux"; + clocks = <&soc_clocks MMP2_CLK_GPIO>; + resets = <&soc_clocks MMP2_CLK_GPIO>; + interrupt-controller; + #interrupt-cells = <2>; + ranges; + + gcb0: gpio@d4019000 { + reg = <0xd4019000 0x4>; + }; + + gcb1: gpio@d4019004 { + reg = <0xd4019004 0x4>; + }; + + gcb2: gpio@d4019008 { + reg = <0xd4019008 0x4>; + }; + + gcb3: gpio@d4019100 { + reg = <0xd4019100 0x4>; + }; + + gcb4: gpio@d4019104 { + reg = <0xd4019104 0x4>; + }; + + gcb5: gpio@d4019108 { + reg = <0xd4019108 0x4>; + }; + }; + + twsi1: i2c@d4011000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4011000 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_clocks MMP2_CLK_TWSI0>; + resets = <&soc_clocks MMP2_CLK_TWSI0>; + #address-cells = <1>; + #size-cells = <0>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + twsi2: i2c@d4031000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4031000 0x1000>; + interrupt-parent = <&twsi_mux>; + interrupts = <0>; + clocks = <&soc_clocks MMP2_CLK_TWSI1>; + resets = <&soc_clocks MMP2_CLK_TWSI1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + twsi3: i2c@d4032000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4032000 0x1000>; + interrupt-parent = <&twsi_mux>; + interrupts = <1>; + clocks = <&soc_clocks MMP2_CLK_TWSI2>; + resets = <&soc_clocks MMP2_CLK_TWSI2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + twsi4: i2c@d4033000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4033000 0x1000>; + interrupt-parent = <&twsi_mux>; + interrupts = <2>; + clocks = <&soc_clocks MMP2_CLK_TWSI3>; + resets = <&soc_clocks MMP2_CLK_TWSI3>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + + twsi5: i2c@d4033800 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4033800 0x1000>; + interrupt-parent = <&twsi_mux>; + interrupts = <3>; + clocks = <&soc_clocks MMP2_CLK_TWSI4>; + resets = <&soc_clocks MMP2_CLK_TWSI4>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + twsi6: i2c@d4034000 { + compatible = "mrvl,mmp-twsi"; + reg = <0xd4034000 0x1000>; + interrupt-parent = <&twsi_mux>; + interrupts = <4>; + clocks = <&soc_clocks MMP2_CLK_TWSI5>; + resets = <&soc_clocks MMP2_CLK_TWSI5>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + rtc: rtc@d4010000 { + compatible = "mrvl,mmp-rtc"; + reg = <0xd4010000 0x1000>; + interrupts = <1 0>; + interrupt-names = "rtc 1Hz", "rtc alarm"; + interrupt-parent = <&rtc_mux>; + clocks = <&soc_clocks MMP2_CLK_RTC>; + resets = <&soc_clocks MMP2_CLK_RTC>; + status = "disabled"; + }; + + ssp1: spi@d4035000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4035000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP0>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ssp2: spi@d4036000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4036000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP1>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ssp3: spi@d4037000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4037000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP2>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ssp4: spi@d4039000 { + compatible = "marvell,mmp2-ssp"; + reg = <0xd4039000 0x1000>; + clocks = <&soc_clocks MMP2_CLK_SSP3>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + l2: l2-cache-controller@d0020000 { + compatible = "marvell,tauros3-cache", "arm,pl310-cache"; + reg = <0xd0020000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + soc_clocks: clocks { + compatible = "marvell,mmp2-clock"; + reg = <0xd4050000 0x1000>, + <0xd4282800 0x400>, + <0xd4015000 0x1000>; + reg-names = "mpmu", "apmu", "apbc"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + snoop-control-unit@e0000000 { + compatible = "arm,arm11mp-scu"; + reg = <0xe0000000 0x100>; + }; + + gic: interrupt-controller@e0001000 { + compatible = "arm,arm11mp-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xe0001000 0x1000>, + <0xe0000100 0x100>; + }; + + local-timer@e0000600 { + compatible = "arm,arm11mp-twd-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; + reg = <0xe0000600 0x20>; + }; + + watchdog@2c000620 { + compatible = "arm,arm11mp-twd-wdt"; + reg = <0xe0000620 0x20>; + interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_EDGE_RISING)>; + }; + }; +};

[v3,16/16] ARM: dts: mmp3: Add MMP3 SoC dts file

Commit Message

Comments

Patch