diff mbox series

bnx2fc: Handle scope bits when array returns BUSY or TASK_SET_FULL

Message ID 1567801579-18674-1-git-send-email-loberman@redhat.com (mailing list archive)
State Superseded
Headers show
Series bnx2fc: Handle scope bits when array returns BUSY or TASK_SET_FULL | expand

Commit Message

Laurence Oberman Sept. 6, 2019, 8:26 p.m. UTC
The qla2xxx driver had this issue as well when the newer array
firmware returned the retry_delay_timer in the fcp_rsp.
The bnx2fc is not handling the masking of the scope bits either
so the retry_delay_timestamp value lands up being a large value
added to the timer timestamp delaying I/O for up to 27 Minutes.
This patch adds similar code to handle this to the
bnx2fc driver to avoid the huge delay.

Signed-off-by: Laurence Oberman <loberman@redhat.com>
---
 drivers/scsi/bnx2fc/bnx2fc_io.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

Comments

Laurence Oberman Sept. 6, 2019, 8:31 p.m. UTC | #1
On Fri, 2019-09-06 at 16:26 -0400, Laurence Oberman wrote:
> The qla2xxx driver had this issue as well when the newer array
> firmware returned the retry_delay_timer in the fcp_rsp.
> The bnx2fc is not handling the masking of the scope bits either
> so the retry_delay_timestamp value lands up being a large value
> added to the timer timestamp delaying I/O for up to 27 Minutes.
> This patch adds similar code to handle this to the
> bnx2fc driver to avoid the huge delay.
> 
> Signed-off-by: Laurence Oberman <loberman@redhat.com>
> ---
>  drivers/scsi/bnx2fc/bnx2fc_io.c | 23 ++++++++++++++++++++---
>  1 file changed, 20 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c
> b/drivers/scsi/bnx2fc/bnx2fc_io.c
> index 9e50e5b..39f4aeb 100644
> --- a/drivers/scsi/bnx2fc/bnx2fc_io.c
> +++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
> @@ -1928,6 +1928,7 @@ void bnx2fc_process_scsi_cmd_compl(struct
> bnx2fc_cmd *io_req,
>  	struct bnx2fc_rport *tgt = io_req->tgt;
>  	struct scsi_cmnd *sc_cmd;
>  	struct Scsi_Host *host;
> +	u16 scope, qualifier = 0;
>  
>  
>  	/* scsi_cmd_cmpl is called with tgt lock held */
> @@ -1997,12 +1998,28 @@ void bnx2fc_process_scsi_cmd_compl(struct
> bnx2fc_cmd *io_req,
>  
>  			if (io_req->cdb_status ==
> SAM_STAT_TASK_SET_FULL ||
>  			    io_req->cdb_status == SAM_STAT_BUSY) {
> +				/* Newer array firmware with BUSY or
> +				 * TASK_SET_FULL may return a status
> that needs
> +				 * the scope bits masked.
> +				 * Or a huge delay timestamp up to 27
> minutes
> +				 * can result.
> +				*/
> +				if (fcp_rsp->retry_delay_timer) {
> +					/* Upper 2 bits */
> +					scope = fcp_rsp-
> >retry_delay_timer
> +						& 0xC000;
> +					/* Lower 14 bits */
> +					qualifier = fcp_rsp-
> >retry_delay_timer
> +						& 0x3FFF;
> +				}
> +				if (scope > 0 && qualifier > 0 &&
> +					qualifier <= 0x3FEF) {
>  				/* Set the jiffies + retry_delay_timer
> * 100ms
>  				   for the rport/tgt */
> -				tgt->retry_delay_timestamp = jiffies +
> -					fcp_rsp->retry_delay_timer * HZ
> / 10;
> +					tgt->retry_delay_timestamp =
> jiffies +
> +						(qualifier * HZ / 10);
> +				}
>  			}
> -
>  		}
>  		if (io_req->fcp_resid)
>  			scsi_set_resid(sc_cmd, io_req->fcp_resid);

Hello 
Please add
Reported-by: David Jeffery <djeffery@redhat.com>
Apologies forgot to add that.
cdupuis1@gmail.com Sept. 8, 2019, 1:34 a.m. UTC | #2
On Fri, 2019-09-06 at 16:26 -0400, Laurence Oberman wrote:
> The qla2xxx driver had this issue as well when the newer array
> firmware returned the retry_delay_timer in the fcp_rsp.
> The bnx2fc is not handling the masking of the scope bits either
> so the retry_delay_timestamp value lands up being a large value
> added to the timer timestamp delaying I/O for up to 27 Minutes.
> This patch adds similar code to handle this to the
> bnx2fc driver to avoid the huge delay.
> 
> Signed-off-by: Laurence Oberman <loberman@redhat.com>
> ---
>  drivers/scsi/bnx2fc/bnx2fc_io.c | 23 ++++++++++++++++++++---
>  1 file changed, 20 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c
> b/drivers/scsi/bnx2fc/bnx2fc_io.c
> index 9e50e5b..39f4aeb 100644
> --- a/drivers/scsi/bnx2fc/bnx2fc_io.c
> +++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
> @@ -1928,6 +1928,7 @@ void bnx2fc_process_scsi_cmd_compl(struct
> bnx2fc_cmd *io_req,
>  	struct bnx2fc_rport *tgt = io_req->tgt;
>  	struct scsi_cmnd *sc_cmd;
>  	struct Scsi_Host *host;
> +	u16 scope, qualifier = 0;
>  
>  
>  	/* scsi_cmd_cmpl is called with tgt lock held */
> @@ -1997,12 +1998,28 @@ void bnx2fc_process_scsi_cmd_compl(struct
> bnx2fc_cmd *io_req,
>  
>  			if (io_req->cdb_status ==
> SAM_STAT_TASK_SET_FULL ||
>  			    io_req->cdb_status == SAM_STAT_BUSY) {
> +				/* Newer array firmware with BUSY or
> +				 * TASK_SET_FULL may return a status
> that needs
> +				 * the scope bits masked.
> +				 * Or a huge delay timestamp up to 27
> minutes
> +				 * can result.
> +				*/
> +				if (fcp_rsp->retry_delay_timer) {
> +					/* Upper 2 bits */
> +					scope = fcp_rsp-
> >retry_delay_timer
> +						& 0xC000;
> +					/* Lower 14 bits */
> +					qualifier = fcp_rsp-
> >retry_delay_timer
> +						& 0x3FFF;
> +				}
> +				if (scope > 0 && qualifier > 0 &&
> +					qualifier <= 0x3FEF) {
>  				/* Set the jiffies + retry_delay_timer
> * 100ms
>  				   for the rport/tgt */
> -				tgt->retry_delay_timestamp = jiffies +
> -					fcp_rsp->retry_delay_timer * HZ
> / 10;
> +					tgt->retry_delay_timestamp =
> jiffies +
> +						(qualifier * HZ / 10);
> +				}
>  			}
> -
>  		}
>  		if (io_req->fcp_resid)
>  			scsi_set_resid(sc_cmd, io_req->fcp_resid);

What better thing to be doing than reviewing patches on a Saturday
evening.  Looks good though I might suggest moving the indent of the
comment in the new if statement.

Reviewed-by: Chad Dupuis <cdupuis1@gmail.com>
Laurence Oberman Sept. 9, 2019, 11:52 a.m. UTC | #3
On Sat, 2019-09-07 at 21:34 -0400, cdupuis1@gmail.com wrote:
> On Fri, 2019-09-06 at 16:26 -0400, Laurence Oberman wrote:
> > The qla2xxx driver had this issue as well when the newer array
> > firmware returned the retry_delay_timer in the fcp_rsp.
> > The bnx2fc is not handling the masking of the scope bits either
> > so the retry_delay_timestamp value lands up being a large value
> > added to the timer timestamp delaying I/O for up to 27 Minutes.
> > This patch adds similar code to handle this to the
> > bnx2fc driver to avoid the huge delay.
> > 
> > Signed-off-by: Laurence Oberman <loberman@redhat.com>
> > ---
> >  drivers/scsi/bnx2fc/bnx2fc_io.c | 23 ++++++++++++++++++++---
> >  1 file changed, 20 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c
> > b/drivers/scsi/bnx2fc/bnx2fc_io.c
> > index 9e50e5b..39f4aeb 100644
> > --- a/drivers/scsi/bnx2fc/bnx2fc_io.c
> > +++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
> > @@ -1928,6 +1928,7 @@ void bnx2fc_process_scsi_cmd_compl(struct
> > bnx2fc_cmd *io_req,
> >  	struct bnx2fc_rport *tgt = io_req->tgt;
> >  	struct scsi_cmnd *sc_cmd;
> >  	struct Scsi_Host *host;
> > +	u16 scope, qualifier = 0;
> >  
> >  
> >  	/* scsi_cmd_cmpl is called with tgt lock held */
> > @@ -1997,12 +1998,28 @@ void bnx2fc_process_scsi_cmd_compl(struct
> > bnx2fc_cmd *io_req,
> >  
> >  			if (io_req->cdb_status ==
> > SAM_STAT_TASK_SET_FULL ||
> >  			    io_req->cdb_status == SAM_STAT_BUSY) {
> > +				/* Newer array firmware with BUSY or
> > +				 * TASK_SET_FULL may return a status
> > that needs
> > +				 * the scope bits masked.
> > +				 * Or a huge delay timestamp up to 27
> > minutes
> > +				 * can result.
> > +				*/
> > +				if (fcp_rsp->retry_delay_timer) {
> > +					/* Upper 2 bits */
> > +					scope = fcp_rsp-
> > > retry_delay_timer
> > 
> > +						& 0xC000;
> > +					/* Lower 14 bits */
> > +					qualifier = fcp_rsp-
> > > retry_delay_timer
> > 
> > +						& 0x3FFF;
> > +				}
> > +				if (scope > 0 && qualifier > 0 &&
> > +					qualifier <= 0x3FEF) {
> >  				/* Set the jiffies + retry_delay_timer
> > * 100ms
> >  				   for the rport/tgt */
> > -				tgt->retry_delay_timestamp = jiffies +
> > -					fcp_rsp->retry_delay_timer * HZ
> > / 10;
> > +					tgt->retry_delay_timestamp =
> > jiffies +
> > +						(qualifier * HZ / 10);
> > +				}
> >  			}
> > -
> >  		}
> >  		if (io_req->fcp_resid)
> >  			scsi_set_resid(sc_cmd, io_req->fcp_resid);
> 
> What better thing to be doing than reviewing patches on a Saturday
> evening.  Looks good though I might suggest moving the indent of the
> comment in the new if statement.
> 
> Reviewed-by: Chad Dupuis <cdupuis1@gmail.com>
> 

The qla2xxx driver had this issue as well when the newer array
firmware returned the retry_delay_timer in the fcp_rsp.
The bnx2fc is not handling the masking of the scope bits either
so the retry_delay_timestamp value lands up being a large value
added to the timer timestamp delaying I/O for up to 27 Minutes.
This patch adds similar code to handle this to the
bnx2fc driver to avoid the huge delay.

V2. Indent comments as suggested

Signed-off-by: Laurence Oberman <loberman@redhat.com>
Reported-by: David Jeffery <djeffery@redhat.com>

---
 drivers/scsi/bnx2fc/bnx2fc_io.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c
b/drivers/scsi/bnx2fc/bnx2fc_io.c
index 9e50e5b..39f4aeb 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -1928,6 +1928,7 @@ void bnx2fc_process_scsi_cmd_compl(struct
bnx2fc_cmd *io_req,
 	struct bnx2fc_rport *tgt = io_req->tgt;
 	struct scsi_cmnd *sc_cmd;
 	struct Scsi_Host *host;
+	u16 scope, qualifier = 0;
 
 
 	/* scsi_cmd_cmpl is called with tgt lock held */
@@ -1997,12 +1998,28 @@ void bnx2fc_process_scsi_cmd_compl(struct
bnx2fc_cmd *io_req,
 
 			if (io_req->cdb_status ==
SAM_STAT_TASK_SET_FULL ||
 			    io_req->cdb_status == SAM_STAT_BUSY) {
+				/* Newer array firmware with BUSY or
+				 * TASK_SET_FULL may return a status
that needs
+				 * the scope bits masked.
+				 * Or a huge delay timestamp up to 27
minutes
+				 * can result.
+				*/
+				if (fcp_rsp->retry_delay_timer) {
+					/* Upper 2 bits */
+					scope = fcp_rsp-
>retry_delay_timer
+						& 0xC000;
+					/* Lower 14 bits */
+					qualifier = fcp_rsp-
>retry_delay_timer
+						& 0x3FFF;
+				}
+				if (scope > 0 && qualifier > 0 &&
+					qualifier <= 0x3FEF) {
 					/* Set the jiffies +
retry_delay_timer * 100ms
 				   	for the rport/tgt */
-				tgt->retry_delay_timestamp = jiffies +
-					fcp_rsp->retry_delay_timer * HZ
/ 10;
+					tgt->retry_delay_timestamp =
jiffies +
+						(qualifier * HZ / 10);
+				}
 			}
-
 		}
 		if (io_req->fcp_resid)
 			scsi_set_resid(sc_cmd, io_req->fcp_resid);
Laurence Oberman Sept. 9, 2019, 12:04 p.m. UTC | #4
On Mon, 2019-09-09 at 07:52 -0400, Laurence Oberman wrote:
> On Sat, 2019-09-07 at 21:34 -0400, cdupuis1@gmail.com wrote:
> > On Fri, 2019-09-06 at 16:26 -0400, Laurence Oberman wrote:
> > > The qla2xxx driver had this issue as well when the newer array
> > > firmware returned the retry_delay_timer in the fcp_rsp.
> > > The bnx2fc is not handling the masking of the scope bits either
> > > so the retry_delay_timestamp value lands up being a large value
> > > added to the timer timestamp delaying I/O for up to 27 Minutes.
> > > This patch adds similar code to handle this to the
> > > bnx2fc driver to avoid the huge delay.
> > > 
> > > Signed-off-by: Laurence Oberman <loberman@redhat.com>
> > > ---
> > >  drivers/scsi/bnx2fc/bnx2fc_io.c | 23 ++++++++++++++++++++---
> > >  1 file changed, 20 insertions(+), 3 deletions(-)
> > > 
> > > diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c
> > > b/drivers/scsi/bnx2fc/bnx2fc_io.c
> > > index 9e50e5b..39f4aeb 100644
> > > --- a/drivers/scsi/bnx2fc/bnx2fc_io.c
> > > +++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
> > > @@ -1928,6 +1928,7 @@ void bnx2fc_process_scsi_cmd_compl(struct
> > > bnx2fc_cmd *io_req,
> > >  	struct bnx2fc_rport *tgt = io_req->tgt;
> > >  	struct scsi_cmnd *sc_cmd;
> > >  	struct Scsi_Host *host;
> > > +	u16 scope, qualifier = 0;
> > >  
> > >  
> > >  	/* scsi_cmd_cmpl is called with tgt lock held */
> > > @@ -1997,12 +1998,28 @@ void bnx2fc_process_scsi_cmd_compl(struct
> > > bnx2fc_cmd *io_req,
> > >  
> > >  			if (io_req->cdb_status ==
> > > SAM_STAT_TASK_SET_FULL ||
> > >  			    io_req->cdb_status == SAM_STAT_BUSY) {
> > > +				/* Newer array firmware with BUSY or
> > > +				 * TASK_SET_FULL may return a status
> > > that needs
> > > +				 * the scope bits masked.
> > > +				 * Or a huge delay timestamp up to 27
> > > minutes
> > > +				 * can result.
> > > +				*/
> > > +				if (fcp_rsp->retry_delay_timer) {
> > > +					/* Upper 2 bits */
> > > +					scope = fcp_rsp-
> > > > retry_delay_timer
> > > 
> > > +						& 0xC000;
> > > +					/* Lower 14 bits */
> > > +					qualifier = fcp_rsp-
> > > > retry_delay_timer
> > > 
> > > +						& 0x3FFF;
> > > +				}
> > > +				if (scope > 0 && qualifier > 0 &&
> > > +					qualifier <= 0x3FEF) {
> > >  				/* Set the jiffies + retry_delay_timer
> > > * 100ms
> > >  				   for the rport/tgt */
> > > -				tgt->retry_delay_timestamp = jiffies +
> > > -					fcp_rsp->retry_delay_timer * HZ
> > > / 10;
> > > +					tgt->retry_delay_timestamp =
> > > jiffies +
> > > +						(qualifier * HZ / 10);
> > > +				}
> > >  			}
> > > -
> > >  		}
> > >  		if (io_req->fcp_resid)
> > >  			scsi_set_resid(sc_cmd, io_req->fcp_resid);
> > 
> > What better thing to be doing than reviewing patches on a Saturday
> > evening.  Looks good though I might suggest moving the indent of
> > the
> > comment in the new if statement.
> > 
> > Reviewed-by: Chad Dupuis <cdupuis1@gmail.com>
> > 
> 
> The qla2xxx driver had this issue as well when the newer array
> firmware returned the retry_delay_timer in the fcp_rsp.
> The bnx2fc is not handling the masking of the scope bits either
> so the retry_delay_timestamp value lands up being a large value
> added to the timer timestamp delaying I/O for up to 27 Minutes.
> This patch adds similar code to handle this to the
> bnx2fc driver to avoid the huge delay.
> 
> V2. Indent comments as suggested
> 
> Signed-off-by: Laurence Oberman <loberman@redhat.com>
> Reported-by: David Jeffery <djeffery@redhat.com>
> 
> ---
>  drivers/scsi/bnx2fc/bnx2fc_io.c | 23 ++++++++++++++++++++---
>  1 file changed, 20 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c
> b/drivers/scsi/bnx2fc/bnx2fc_io.c
> index 9e50e5b..39f4aeb 100644
> --- a/drivers/scsi/bnx2fc/bnx2fc_io.c
> +++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
> @@ -1928,6 +1928,7 @@ void bnx2fc_process_scsi_cmd_compl(struct
> bnx2fc_cmd *io_req,
>  	struct bnx2fc_rport *tgt = io_req->tgt;
>  	struct scsi_cmnd *sc_cmd;
>  	struct Scsi_Host *host;
> +	u16 scope, qualifier = 0;
>  
>  
>  	/* scsi_cmd_cmpl is called with tgt lock held */
> @@ -1997,12 +1998,28 @@ void bnx2fc_process_scsi_cmd_compl(struct
> bnx2fc_cmd *io_req,
>  
>  			if (io_req->cdb_status ==
> SAM_STAT_TASK_SET_FULL ||
>  			    io_req->cdb_status == SAM_STAT_BUSY) {
> +				/* Newer array firmware with BUSY or
> +				 * TASK_SET_FULL may return a status
> that needs
> +				 * the scope bits masked.
> +				 * Or a huge delay timestamp up to 27
> minutes
> +				 * can result.
> +				*/
> +				if (fcp_rsp->retry_delay_timer) {
> +					/* Upper 2 bits */
> +					scope = fcp_rsp-
> > retry_delay_timer
> 
> +						& 0xC000;
> +					/* Lower 14 bits */
> +					qualifier = fcp_rsp-
> > retry_delay_timer
> 
> +						& 0x3FFF;
> +				}
> +				if (scope > 0 && qualifier > 0 &&
> +					qualifier <= 0x3FEF) {
>  					/* Set the jiffies +
> retry_delay_timer * 100ms
>  				   	for the rport/tgt */
> -				tgt->retry_delay_timestamp = jiffies +
> -					fcp_rsp->retry_delay_timer * HZ
> / 10;
> +					tgt->retry_delay_timestamp =
> jiffies +
> +						(qualifier * HZ / 10);
> +				}
>  			}
> -
>  		}
>  		if (io_req->fcp_resid)
>  			scsi_set_resid(sc_cmd, io_req->fcp_resid);

I will send a V2 from git this got munged by the mailer on the reply. 
Also comments line landed up exceeding 79 column width
diff mbox series

Patch

diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c
index 9e50e5b..39f4aeb 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -1928,6 +1928,7 @@  void bnx2fc_process_scsi_cmd_compl(struct bnx2fc_cmd *io_req,
 	struct bnx2fc_rport *tgt = io_req->tgt;
 	struct scsi_cmnd *sc_cmd;
 	struct Scsi_Host *host;
+	u16 scope, qualifier = 0;
 
 
 	/* scsi_cmd_cmpl is called with tgt lock held */
@@ -1997,12 +1998,28 @@  void bnx2fc_process_scsi_cmd_compl(struct bnx2fc_cmd *io_req,
 
 			if (io_req->cdb_status == SAM_STAT_TASK_SET_FULL ||
 			    io_req->cdb_status == SAM_STAT_BUSY) {
+				/* Newer array firmware with BUSY or
+				 * TASK_SET_FULL may return a status that needs
+				 * the scope bits masked.
+				 * Or a huge delay timestamp up to 27 minutes
+				 * can result.
+				*/
+				if (fcp_rsp->retry_delay_timer) {
+					/* Upper 2 bits */
+					scope = fcp_rsp->retry_delay_timer
+						& 0xC000;
+					/* Lower 14 bits */
+					qualifier = fcp_rsp->retry_delay_timer
+						& 0x3FFF;
+				}
+				if (scope > 0 && qualifier > 0 &&
+					qualifier <= 0x3FEF) {
 				/* Set the jiffies + retry_delay_timer * 100ms
 				   for the rport/tgt */
-				tgt->retry_delay_timestamp = jiffies +
-					fcp_rsp->retry_delay_timer * HZ / 10;
+					tgt->retry_delay_timestamp = jiffies +
+						(qualifier * HZ / 10);
+				}
 			}
-
 		}
 		if (io_req->fcp_resid)
 			scsi_set_resid(sc_cmd, io_req->fcp_resid);