| Message ID | 20190907171443.16181-2-anshuman.gupta@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | DC3CO Support for TGL | expand |
On 9/7/2019 10:44 PM, Anshuman Gupta wrote: > Adding following definition to i915_reg.h > 1. DC_STATE_EN register DC3CO bit fields and masks. > 2. Transcoder EXITLINE register and its bit fields and mask. > > Cc: Jani Nikula <jani.nikula@intel.com> > Cc: Imre Deak <imre.deak@intel.com> > Cc: Animesh Manna <animesh.manna@intel.com> > Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> > --- > drivers/gpu/drm/i915/i915_reg.h | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h > index 006cffd56be2..273a4ed8b3e9 100644 > --- a/drivers/gpu/drm/i915/i915_reg.h > +++ b/drivers/gpu/drm/i915/i915_reg.h > @@ -4135,6 +4135,7 @@ enum { > #define _VTOTAL_A 0x6000c > #define _VBLANK_A 0x60010 > #define _VSYNC_A 0x60014 > +#define _EXITLINE_A 0x60018 > #define _PIPEASRC 0x6001c > #define _BCLRPAT_A 0x60020 > #define _VSYNCSHIFT_A 0x60028 > @@ -4181,11 +4182,16 @@ enum { > #define VTOTAL(trans) _MMIO_TRANS2(trans, _VTOTAL_A) > #define VBLANK(trans) _MMIO_TRANS2(trans, _VBLANK_A) > #define VSYNC(trans) _MMIO_TRANS2(trans, _VSYNC_A) > +#define EXITLINE(trans) _MMIO_TRANS2(trans, _EXITLINE_A) > #define BCLRPAT(trans) _MMIO_TRANS2(trans, _BCLRPAT_A) > #define VSYNCSHIFT(trans) _MMIO_TRANS2(trans, _VSYNCSHIFT_A) > #define PIPESRC(trans) _MMIO_TRANS2(trans, _PIPEASRC) > #define PIPE_MULT(trans) _MMIO_TRANS2(trans, _PIPE_MULT_A) > > +#define EXITLINE_ENABLE (1 << 31) Need one extra space and same applicable below. REG_BIT can be used. Please refer kernel doc added as header of this file. Regards, Animesh > +#define EXITLINE_MASK (0x1fff) > +#define EXITLINE_SHIFT 0 > + > /* > * HSW+ eDP PSR registers > * > @@ -10114,6 +10120,8 @@ enum skl_power_gate { > /* GEN9 DC */ > #define DC_STATE_EN _MMIO(0x45504) > #define DC_STATE_DISABLE 0 > +#define DC_STATE_EN_DC3CO (1 << 30) > +#define DC_STATE_DC3CO_STATUS (1 << 29) > #define DC_STATE_EN_UPTO_DC5 (1 << 0) > #define DC_STATE_EN_DC9 (1 << 3) > #define DC_STATE_EN_UPTO_DC6 (2 << 0)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 006cffd56be2..273a4ed8b3e9 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -4135,6 +4135,7 @@ enum { #define _VTOTAL_A 0x6000c #define _VBLANK_A 0x60010 #define _VSYNC_A 0x60014 +#define _EXITLINE_A 0x60018 #define _PIPEASRC 0x6001c #define _BCLRPAT_A 0x60020 #define _VSYNCSHIFT_A 0x60028 @@ -4181,11 +4182,16 @@ enum { #define VTOTAL(trans) _MMIO_TRANS2(trans, _VTOTAL_A) #define VBLANK(trans) _MMIO_TRANS2(trans, _VBLANK_A) #define VSYNC(trans) _MMIO_TRANS2(trans, _VSYNC_A) +#define EXITLINE(trans) _MMIO_TRANS2(trans, _EXITLINE_A) #define BCLRPAT(trans) _MMIO_TRANS2(trans, _BCLRPAT_A) #define VSYNCSHIFT(trans) _MMIO_TRANS2(trans, _VSYNCSHIFT_A) #define PIPESRC(trans) _MMIO_TRANS2(trans, _PIPEASRC) #define PIPE_MULT(trans) _MMIO_TRANS2(trans, _PIPE_MULT_A) +#define EXITLINE_ENABLE (1 << 31) +#define EXITLINE_MASK (0x1fff) +#define EXITLINE_SHIFT 0 + /* * HSW+ eDP PSR registers * @@ -10114,6 +10120,8 @@ enum skl_power_gate { /* GEN9 DC */ #define DC_STATE_EN _MMIO(0x45504) #define DC_STATE_DISABLE 0 +#define DC_STATE_EN_DC3CO (1 << 30) +#define DC_STATE_DC3CO_STATUS (1 << 29) #define DC_STATE_EN_UPTO_DC5 (1 << 0) #define DC_STATE_EN_DC9 (1 << 3) #define DC_STATE_EN_UPTO_DC6 (2 << 0)
Adding following definition to i915_reg.h 1. DC_STATE_EN register DC3CO bit fields and masks. 2. Transcoder EXITLINE register and its bit fields and mask. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> --- drivers/gpu/drm/i915/i915_reg.h | 8 ++++++++ 1 file changed, 8 insertions(+)