diff mbox series

brcmsmac: Use DIV_ROUND_CLOSEST directly to make it readable

Message ID 1567700648-28162-1-git-send-email-zhongjiang@huawei.com (mailing list archive)
State Accepted
Commit 3dfb22003f98ab076c2c19121f05d8fe9e150e17
Delegated to: Kalle Valo
Headers show
Series brcmsmac: Use DIV_ROUND_CLOSEST directly to make it readable | expand

Commit Message

zhong jiang Sept. 5, 2019, 4:24 p.m. UTC 
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
but is perhaps more readable.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
---
 .../net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c   | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

Comments

Kalle Valo Sept. 13, 2019, 2:20 p.m. UTC | #1 
zhong jiang <zhongjiang@huawei.com> wrote:

> The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
> but is perhaps more readable.
> 
> Signed-off-by: zhong jiang <zhongjiang@huawei.com>

Patch applied to wireless-drivers-next.git, thanks.

3dfb22003f98 brcmsmac: Use DIV_ROUND_CLOSEST directly to make it readable
diff mbox series

Patch

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c
index 07f61d6..3bf152d 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c
@@ -17748,7 +17748,7 @@  static void wlc_phy_txpwrctrl_pwr_setup_nphy(struct brcms_phy *pi)
 			num = 8 *
 			      (16 * b0[tbl_id - 26] + b1[tbl_id - 26] * idx);
 			den = 32768 + a1[tbl_id - 26] * idx;
-			pwr_est = max(((4 * num + den / 2) / den), -8);
+			pwr_est = max(DIV_ROUND_CLOSEST(4 * num, den), -8);
 			if (NREV_LT(pi->pubpi.phy_rev, 3)) {
 				if (idx <=
 				    (uint) (31 - idle_tssi[tbl_id - 26] + 1))
@@ -26990,8 +26990,8 @@  static void wlc_phy_rxcal_phycleanup_nphy(struct brcms_phy *pi, u8 rx_core)
 				     NPHY_RXCAL_TONEAMP, 0, cal_type, false);
 
 		wlc_phy_rx_iq_est_nphy(pi, est, num_samps, 32, 0);
-		i_pwr = (est[rx_core].i_pwr + num_samps / 2) / num_samps;
-		q_pwr = (est[rx_core].q_pwr + num_samps / 2) / num_samps;
+		i_pwr = DIV_ROUND_CLOSEST(est[rx_core].i_pwr, num_samps);
+		q_pwr = DIV_ROUND_CLOSEST(est[rx_core].q_pwr, num_samps);
 		curr_pwr = i_pwr + q_pwr;
 
 		switch (gainctrl_dirn) {
@@ -27673,10 +27673,10 @@  static int wlc_phy_cal_rxiq_nphy_rev3(struct brcms_phy *pi,
 					wlc_phy_rx_iq_est_nphy(pi, est,
 							       num_samps, 32,
 							       0);
-					i_pwr =	(est[rx_core].i_pwr +
-						 num_samps / 2) / num_samps;
-					q_pwr =	(est[rx_core].q_pwr +
-						 num_samps / 2) / num_samps;
+					i_pwr = DIV_ROUND_CLOSEST(est[rx_core].i_pwr,
+									 num_samps);
+					q_pwr = DIV_ROUND_CLOSEST(est[rx_core].q_pwr,
+									 num_samps);
 					tot_pwr[gain_pass] = i_pwr + q_pwr;
 				} else {