| Message ID | 20190913153714.30980-2-aford173@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [RFC,v2,1/2] ARM: dts: omap3: Add cpu trips and cooling map for omap3 family | expand |
On Sat, Sep 14, 2019 at 4:25 AM H. Nikolaus Schaller <hns@goldelico.com> wrote: > > > > Am 13.09.2019 um 17:37 schrieb Adam Ford <aford173@gmail.com>: > > > > Because the omap34xx, omap36xx and am3517 SoC's have the same > > thermal junction limits, there is no need to duplicate the entry > > multiple times. > > > > This patch removes the thermal references from omap36xx and > > omap34xx and pushes it into the common omap3.dtsi file with > > the added benefit of enabling the thermal info on the AM3517. > > > > Signed-off-by: Adam Ford <aford173@gmail.com> Disregard this patch. I'll drop it based on Nikolaus' comments below. > > --- > > V2: Add node name for cpu and add cooling-cells entry > > > > diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi > > index 4043ecb38016..84704eb3b604 100644 > > --- a/arch/arm/boot/dts/omap3.dtsi > > +++ b/arch/arm/boot/dts/omap3.dtsi > > @@ -32,7 +32,7 @@ > > #address-cells = <1>; > > #size-cells = <0>; > > > > - cpu@0 { > > + cpu: cpu@0 { > > compatible = "arm,cortex-a8"; > > device_type = "cpu"; > > reg = <0x0>; > > @@ -41,9 +41,14 @@ > > clock-names = "cpu"; > > > > clock-latency = <300000>; /* From omap-cpufreq driver */ > > + #cooling-cells = <2>; > > }; > > }; > > Looks ok. > > > > > + thermal_zones: thermal-zones { > > + #include "omap3-cpu-thermal.dtsi" > > + }; > > + > > I have observed one compile issue: we also include this indirectly by am3517.dtsi > and the included code refers to <&bandgap 0> but there is no bandgap definition in am3517.dtsi > > Therefore I studied the am35x TRM (SPRUGR0C) and compared to the am/dm37x TRM (SPRUGN4M). > > But I can't find a bandgap temperature sensor with ADC like it is described in > "13.4.6 Band Gap Voltage and Temperature Sensor" for the am/dm37x. Only > "BANDGAP Logic" exists in both and both have the CM_FCLKEN3_CORE but with > different meaning of bit 0. I didn't read the technical details, I just read there was a bandgap logic, so I assumed it existed. > > There is also no description of an CONTROL_TEMP_SENSOR (0x48002524) register for am35x. > (note: the register is also documented for omap3530). Thanks for looking into this. > > So this might mean that the am35x does not have this feature unless TI simply > did not document it because the chip is specified for a single OPP only where it > make no sense to monitor the temperature. > > We can find out only by looking at 0x48002524 if there is an undocumented > bandgap converter. I will try to read this register when I have some time, but I have to watch Chelsea FC play in 15 minutes. ;-) > > Which means we probably can't make thermal throttling work for it. And even > if the bandgap sensor exists we are lacking an value -> celsius table. I think it's probably best to abandon this patch, per my comment based on all your comments. > > > > pmu@54000000 { > > compatible = "arm,cortex-a8-pmu"; > > reg = <0x54000000 0x800000>; > > diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi > > index f572a477f74c..b80378d6e5c1 100644 > > --- a/arch/arm/boot/dts/omap34xx.dtsi > > +++ b/arch/arm/boot/dts/omap34xx.dtsi > > @@ -101,10 +101,6 @@ > > }; > > }; > > }; > > - > > - thermal_zones: thermal-zones { > > - #include "omap3-cpu-thermal.dtsi" > > - }; > > }; > > > > &ssi { > > diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi > > index 6fb23ada1f64..ff2dca63a04e 100644 > > --- a/arch/arm/boot/dts/omap36xx.dtsi > > +++ b/arch/arm/boot/dts/omap36xx.dtsi > > @@ -140,10 +140,6 @@ > > }; > > }; > > }; > > - > > - thermal_zones: thermal-zones { > > - #include "omap3-cpu-thermal.dtsi" > > - }; > > }; > > So if we have to exclude the am3517 we can not apply the rearrangement part > of this patch. > > I'd suggest to move the cpu: cpu@0 and #cooling-cells into 1/2 (also to make it > compile stand-alone). And have the consolidation separately - if we can fix the > am3517 bandgap sensor issue. I'll drop this, and leave everything in the omap3-cpu-thermal file and let omap34xx and omap36xx point to them as we do now. > > > > > /* OMAP3630 needs dss_96m_fck for VENC */ > > -- > > 2.17.1 > > > > Tested-by: H. Nikolaus Schaller <hns@goldelico.com> # on GTA04A5 with dm3730cbp100 >
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 4043ecb38016..84704eb3b604 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -32,7 +32,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu: cpu@0 { compatible = "arm,cortex-a8"; device_type = "cpu"; reg = <0x0>; @@ -41,9 +41,14 @@ clock-names = "cpu"; clock-latency = <300000>; /* From omap-cpufreq driver */ + #cooling-cells = <2>; }; }; + thermal_zones: thermal-zones { + #include "omap3-cpu-thermal.dtsi" + }; + pmu@54000000 { compatible = "arm,cortex-a8-pmu"; reg = <0x54000000 0x800000>; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index f572a477f74c..b80378d6e5c1 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -101,10 +101,6 @@ }; }; }; - - thermal_zones: thermal-zones { - #include "omap3-cpu-thermal.dtsi" - }; }; &ssi { diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 6fb23ada1f64..ff2dca63a04e 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -140,10 +140,6 @@ }; }; }; - - thermal_zones: thermal-zones { - #include "omap3-cpu-thermal.dtsi" - }; }; /* OMAP3630 needs dss_96m_fck for VENC */
Because the omap34xx, omap36xx and am3517 SoC's have the same thermal junction limits, there is no need to duplicate the entry multiple times. This patch removes the thermal references from omap36xx and omap34xx and pushes it into the common omap3.dtsi file with the added benefit of enabling the thermal info on the AM3517. Signed-off-by: Adam Ford <aford173@gmail.com> --- V2: Add node name for cpu and add cooling-cells entry