diff mbox series

[9/9] xfs: Get rid of ->bmap

Message ID 20190911134315.27380-10-cmaiolino@redhat.com (mailing list archive)
State Deferred, archived
Headers show
Series New ->fiemap infrastructure and ->bmap removal | expand

Commit Message

Carlos Maiolino Sept. 11, 2019, 1:43 p.m. UTC
We don't need ->bmap anymore, only usage for it was FIBMAP, which is now
gone.

Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
---

Changelog:
	V5:
		- Properly rebase against 5.3
		- iomap_{bmap(),bmap_actor()} are now used also by GFS2, so
		  don't remove them anymore
	V2:
		- Kill iomap_bmap() and iomap_bmap_actor()

 fs/xfs/xfs_aops.c  | 24 ------------------------
 fs/xfs/xfs_trace.h |  1 -
 2 files changed, 25 deletions(-)

Comments

Darrick J. Wong Sept. 16, 2019, 5:50 p.m. UTC | #1
On Wed, Sep 11, 2019 at 03:43:15PM +0200, Carlos Maiolino wrote:
> We don't need ->bmap anymore, only usage for it was FIBMAP, which is now
> gone.
> 
> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
> ---
> 
> Changelog:
> 	V5:
> 		- Properly rebase against 5.3
> 		- iomap_{bmap(),bmap_actor()} are now used also by GFS2, so
> 		  don't remove them anymore
> 	V2:
> 		- Kill iomap_bmap() and iomap_bmap_actor()
> 
>  fs/xfs/xfs_aops.c  | 24 ------------------------
>  fs/xfs/xfs_trace.h |  1 -
>  2 files changed, 25 deletions(-)
> 
> diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
> index 4e4a4d7df5ac..a2884537d2c2 100644
> --- a/fs/xfs/xfs_aops.c
> +++ b/fs/xfs/xfs_aops.c
> @@ -1138,29 +1138,6 @@ xfs_vm_releasepage(
>  	return iomap_releasepage(page, gfp_mask);
>  }
>  
> -STATIC sector_t
> -xfs_vm_bmap(
> -	struct address_space	*mapping,
> -	sector_t		block)
> -{
> -	struct xfs_inode	*ip = XFS_I(mapping->host);
> -
> -	trace_xfs_vm_bmap(ip);
> -
> -	/*
> -	 * The swap code (ab-)uses ->bmap to get a block mapping and then
> -	 * bypasses the file system for actual I/O.  We really can't allow
> -	 * that on reflinks inodes, so we have to skip out here.  And yes,
> -	 * 0 is the magic code for a bmap error.
> -	 *
> -	 * Since we don't pass back blockdev info, we can't return bmap
> -	 * information for rt files either.
> -	 */
> -	if (xfs_is_cow_inode(ip) || XFS_IS_REALTIME_INODE(ip))

Uhhhh where does this check happen now?

--D

> -		return 0;
> -	return iomap_bmap(mapping, block, &xfs_iomap_ops);
> -}
> -
>  STATIC int
>  xfs_vm_readpage(
>  	struct file		*unused,
> @@ -1199,7 +1176,6 @@ const struct address_space_operations xfs_address_space_operations = {
>  	.set_page_dirty		= iomap_set_page_dirty,
>  	.releasepage		= xfs_vm_releasepage,
>  	.invalidatepage		= xfs_vm_invalidatepage,
> -	.bmap			= xfs_vm_bmap,
>  	.direct_IO		= noop_direct_IO,
>  	.migratepage		= iomap_migrate_page,
>  	.is_partially_uptodate  = iomap_is_partially_uptodate,
> diff --git a/fs/xfs/xfs_trace.h b/fs/xfs/xfs_trace.h
> index eaae275ed430..c226b562f5da 100644
> --- a/fs/xfs/xfs_trace.h
> +++ b/fs/xfs/xfs_trace.h
> @@ -626,7 +626,6 @@ DEFINE_INODE_EVENT(xfs_readdir);
>  #ifdef CONFIG_XFS_POSIX_ACL
>  DEFINE_INODE_EVENT(xfs_get_acl);
>  #endif
> -DEFINE_INODE_EVENT(xfs_vm_bmap);
>  DEFINE_INODE_EVENT(xfs_file_ioctl);
>  DEFINE_INODE_EVENT(xfs_file_compat_ioctl);
>  DEFINE_INODE_EVENT(xfs_ioctl_setattr);
> -- 
> 2.20.1
>
Carlos Maiolino Sept. 18, 2019, 8:13 a.m. UTC | #2
On Mon, Sep 16, 2019 at 10:50:49AM -0700, Darrick J. Wong wrote:
> On Wed, Sep 11, 2019 at 03:43:15PM +0200, Carlos Maiolino wrote:
> > We don't need ->bmap anymore, only usage for it was FIBMAP, which is now
> > gone.
> > 
> > Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
> > ---
> > 
> > Changelog:
> > 	V5:
> > 		- Properly rebase against 5.3
> > 		- iomap_{bmap(),bmap_actor()} are now used also by GFS2, so
> > 		  don't remove them anymore
> > 	V2:
> > 		- Kill iomap_bmap() and iomap_bmap_actor()
> > 
> >  fs/xfs/xfs_aops.c  | 24 ------------------------
> >  fs/xfs/xfs_trace.h |  1 -
> >  2 files changed, 25 deletions(-)
> > 
> > diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
> > index 4e4a4d7df5ac..a2884537d2c2 100644
> > --- a/fs/xfs/xfs_aops.c
> > +++ b/fs/xfs/xfs_aops.c
> > @@ -1138,29 +1138,6 @@ xfs_vm_releasepage(
> >  	return iomap_releasepage(page, gfp_mask);
> >  }
> >  
> > -STATIC sector_t
> > -xfs_vm_bmap(
> > -	struct address_space	*mapping,
> > -	sector_t		block)
> > -{
> > -	struct xfs_inode	*ip = XFS_I(mapping->host);
> > -
> > -	trace_xfs_vm_bmap(ip);
> > -
> > -	/*
> > -	 * The swap code (ab-)uses ->bmap to get a block mapping and then
> > -	 * bypasses the file system for actual I/O.  We really can't allow
> > -	 * that on reflinks inodes, so we have to skip out here.  And yes,
> > -	 * 0 is the magic code for a bmap error.
> > -	 *
> > -	 * Since we don't pass back blockdev info, we can't return bmap
> > -	 * information for rt files either.
> > -	 */
> > -	if (xfs_is_cow_inode(ip) || XFS_IS_REALTIME_INODE(ip))
> 
> Uhhhh where does this check happen now?

All checks are now made in the caller, bmap_fiemap() based on the filesystem's
returned flags in the fiemap structure. So, it will decide to pass the result
back, or just return -EINVAL.

Well, there is no way for iomap (or bmap_fiemap now) detect the block is in a
realtime device, since we have no flags for that.

Following Christoph's line of thought here, maybe we can add a new IOMAP_F_* so
the filesystem can notify iomap the extent is in a different device? I don't
know, just a thought.

This would still keep the consistency of leaving bmap_fiemap() with the decision
of passing or not.

Cheers.

> 
> --D
> 
> > -		return 0;
> > -	return iomap_bmap(mapping, block, &xfs_iomap_ops);
> > -}
> > -
> >  STATIC int
> >  xfs_vm_readpage(
> >  	struct file		*unused,
> > @@ -1199,7 +1176,6 @@ const struct address_space_operations xfs_address_space_operations = {
> >  	.set_page_dirty		= iomap_set_page_dirty,
> >  	.releasepage		= xfs_vm_releasepage,
> >  	.invalidatepage		= xfs_vm_invalidatepage,
> > -	.bmap			= xfs_vm_bmap,
> >  	.direct_IO		= noop_direct_IO,
> >  	.migratepage		= iomap_migrate_page,
> >  	.is_partially_uptodate  = iomap_is_partially_uptodate,
> > diff --git a/fs/xfs/xfs_trace.h b/fs/xfs/xfs_trace.h
> > index eaae275ed430..c226b562f5da 100644
> > --- a/fs/xfs/xfs_trace.h
> > +++ b/fs/xfs/xfs_trace.h
> > @@ -626,7 +626,6 @@ DEFINE_INODE_EVENT(xfs_readdir);
> >  #ifdef CONFIG_XFS_POSIX_ACL
> >  DEFINE_INODE_EVENT(xfs_get_acl);
> >  #endif
> > -DEFINE_INODE_EVENT(xfs_vm_bmap);
> >  DEFINE_INODE_EVENT(xfs_file_ioctl);
> >  DEFINE_INODE_EVENT(xfs_file_compat_ioctl);
> >  DEFINE_INODE_EVENT(xfs_ioctl_setattr);
> > -- 
> > 2.20.1
> >
Christoph Hellwig Sept. 18, 2019, 1:24 p.m. UTC | #3
On Wed, Sep 18, 2019 at 10:13:04AM +0200, Carlos Maiolino wrote:
> All checks are now made in the caller, bmap_fiemap() based on the filesystem's
> returned flags in the fiemap structure. So, it will decide to pass the result
> back, or just return -EINVAL.
> 
> Well, there is no way for iomap (or bmap_fiemap now) detect the block is in a
> realtime device, since we have no flags for that.
> 
> Following Christoph's line of thought here, maybe we can add a new IOMAP_F_* so
> the filesystem can notify iomap the extent is in a different device? I don't
> know, just a thought.
> 
> This would still keep the consistency of leaving bmap_fiemap() with the decision
> of passing or not.

I think this actually is a problem with FIEMAP as well, as it
doesn't report that things are on a different device.  So I guess for
now we should fail FIEMAP on the RT device as well.
Darrick J. Wong Sept. 18, 2019, 4:12 p.m. UTC | #4
On Wed, Sep 18, 2019 at 03:24:36PM +0200, Christoph Hellwig wrote:
> On Wed, Sep 18, 2019 at 10:13:04AM +0200, Carlos Maiolino wrote:
> > All checks are now made in the caller, bmap_fiemap() based on the filesystem's
> > returned flags in the fiemap structure. So, it will decide to pass the result
> > back, or just return -EINVAL.
> > 
> > Well, there is no way for iomap (or bmap_fiemap now) detect the block is in a
> > realtime device, since we have no flags for that.
> > 
> > Following Christoph's line of thought here, maybe we can add a new IOMAP_F_* so
> > the filesystem can notify iomap the extent is in a different device? I don't
> > know, just a thought.
> > 
> > This would still keep the consistency of leaving bmap_fiemap() with the decision
> > of passing or not.
> 
> I think this actually is a problem with FIEMAP as well, as it
> doesn't report that things are on a different device.  So I guess for
> now we should fail FIEMAP on the RT device as well.

Or enhance FIEMAP to report some kind of device id like I suggested a
while back...

--D
Carlos Maiolino Sept. 23, 2019, 8:52 a.m. UTC | #5
On Wed, Sep 18, 2019 at 09:12:41AM -0700, Darrick J. Wong wrote:
> On Wed, Sep 18, 2019 at 03:24:36PM +0200, Christoph Hellwig wrote:
> > On Wed, Sep 18, 2019 at 10:13:04AM +0200, Carlos Maiolino wrote:
> > > All checks are now made in the caller, bmap_fiemap() based on the filesystem's
> > > returned flags in the fiemap structure. So, it will decide to pass the result
> > > back, or just return -EINVAL.
> > > 
> > > Well, there is no way for iomap (or bmap_fiemap now) detect the block is in a
> > > realtime device, since we have no flags for that.
> > > 
> > > Following Christoph's line of thought here, maybe we can add a new IOMAP_F_* so
> > > the filesystem can notify iomap the extent is in a different device? I don't
> > > know, just a thought.
> > > 
> > > This would still keep the consistency of leaving bmap_fiemap() with the decision
> > > of passing or not.
> > 
> > I think this actually is a problem with FIEMAP as well, as it
> > doesn't report that things are on a different device.  So I guess for
> > now we should fail FIEMAP on the RT device as well.
> 
> Or enhance FIEMAP to report some kind of device id like I suggested a
> while back...

Yes, this is in my todo list Darrick, but as agreed previously, this will be in
a different patchset. It simply does not belong here and will make this patchset
much more complex than it should be.

About this patch itself, there isn't much I can do here, and I think a XFS fix
to make it reject FIEMAP for RT devices as Christoph suggested, belongs to a
xfs-only patch, not to this one.

I can do that too, but on a different patch, changing FS semantics simply does
not belong in this patchset.

Cheers.

> 
> --D
diff mbox series

Patch

diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
index 4e4a4d7df5ac..a2884537d2c2 100644
--- a/fs/xfs/xfs_aops.c
+++ b/fs/xfs/xfs_aops.c
@@ -1138,29 +1138,6 @@  xfs_vm_releasepage(
 	return iomap_releasepage(page, gfp_mask);
 }
 
-STATIC sector_t
-xfs_vm_bmap(
-	struct address_space	*mapping,
-	sector_t		block)
-{
-	struct xfs_inode	*ip = XFS_I(mapping->host);
-
-	trace_xfs_vm_bmap(ip);
-
-	/*
-	 * The swap code (ab-)uses ->bmap to get a block mapping and then
-	 * bypasses the file system for actual I/O.  We really can't allow
-	 * that on reflinks inodes, so we have to skip out here.  And yes,
-	 * 0 is the magic code for a bmap error.
-	 *
-	 * Since we don't pass back blockdev info, we can't return bmap
-	 * information for rt files either.
-	 */
-	if (xfs_is_cow_inode(ip) || XFS_IS_REALTIME_INODE(ip))
-		return 0;
-	return iomap_bmap(mapping, block, &xfs_iomap_ops);
-}
-
 STATIC int
 xfs_vm_readpage(
 	struct file		*unused,
@@ -1199,7 +1176,6 @@  const struct address_space_operations xfs_address_space_operations = {
 	.set_page_dirty		= iomap_set_page_dirty,
 	.releasepage		= xfs_vm_releasepage,
 	.invalidatepage		= xfs_vm_invalidatepage,
-	.bmap			= xfs_vm_bmap,
 	.direct_IO		= noop_direct_IO,
 	.migratepage		= iomap_migrate_page,
 	.is_partially_uptodate  = iomap_is_partially_uptodate,
diff --git a/fs/xfs/xfs_trace.h b/fs/xfs/xfs_trace.h
index eaae275ed430..c226b562f5da 100644
--- a/fs/xfs/xfs_trace.h
+++ b/fs/xfs/xfs_trace.h
@@ -626,7 +626,6 @@  DEFINE_INODE_EVENT(xfs_readdir);
 #ifdef CONFIG_XFS_POSIX_ACL
 DEFINE_INODE_EVENT(xfs_get_acl);
 #endif
-DEFINE_INODE_EVENT(xfs_vm_bmap);
 DEFINE_INODE_EVENT(xfs_file_ioctl);
 DEFINE_INODE_EVENT(xfs_file_compat_ioctl);
 DEFINE_INODE_EVENT(xfs_ioctl_setattr);