| Message ID | 20190918104634.15216-10-s.nawrocki@samsung.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v1,1/9] ASoC: wm8994: Do not register inapplicable controls for WM1811 | expand |
On Wed, Sep 18, 2019 at 12:46:34PM +0200, Sylwester Nawrocki wrote: > Add sound node and the clock configurations for the I2S controller > for audio support on the Exynos5250 SoC Arndale boards with > WM1811 based audio daugther board. > > We need to increase drive strength of the I2S bus, otherwise > the audio CODEC doesn't work. Likely the CODEC's master clock > is the main issue here. > > Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> > --- > arch/arm/boot/dts/exynos5250-arndale.dts | 27 +++++++++++++++++++++++- > 1 file changed, 26 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts > index dc6fa6fe83f1..62aa6720aa88 100644 > --- a/arch/arm/boot/dts/exynos5250-arndale.dts > +++ b/arch/arm/boot/dts/exynos5250-arndale.dts > @@ -11,6 +11,7 @@ > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/input/input.h> > #include <dt-bindings/clock/samsung,s2mps11.h> > +#include <dt-bindings/sound/samsung-i2s.h> > #include "exynos5250.dtsi" > > / { > @@ -135,6 +136,12 @@ > }; > }; > > + sound { > + compatible = "samsung,arndale-wm1811"; > + samsung,audio-cpu = <&i2s0>; > + samsung,audio-codec = <&wm1811>; > + }; > + > fixed-rate-clocks { > xxti { > compatible = "samsung,clock-xxti"; > @@ -499,12 +506,24 @@ > }; > }; > > +&clock { > + assigned-clocks = <&clock CLK_FOUT_EPLL>; > + assigned-clock-rates = <49152000>; > +}; > + > +&clock_audss { > + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>; > + assigned-clock-parents = <&clock CLK_FOUT_EPLL>; > +}; Put them before "cpu" so alphabetical order is preserved. Best regards, Krzysztof > + > &i2c_3 { > status = "okay"; > > - wm1811a@1a { > + wm1811: codec@1a { > compatible = "wlf,wm1811"; > reg = <0x1a>; > + clocks = <&i2s0 CLK_I2S_CDCLK>; > + clock-names = "MCLK1"; > > AVDD2-supply = <&main_dc_reg>; > CPVDD-supply = <&main_dc_reg>; > @@ -540,9 +559,15 @@ > }; > > &i2s0 { > + assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; > + assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>; > status = "okay"; > }; > > +&i2s0_bus { > + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>; > +}; > + > &mixer { > status = "okay"; > }; > -- > 2.17.1 >
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index dc6fa6fe83f1..62aa6720aa88 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -11,6 +11,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include <dt-bindings/clock/samsung,s2mps11.h> +#include <dt-bindings/sound/samsung-i2s.h> #include "exynos5250.dtsi" / { @@ -135,6 +136,12 @@ }; }; + sound { + compatible = "samsung,arndale-wm1811"; + samsung,audio-cpu = <&i2s0>; + samsung,audio-codec = <&wm1811>; + }; + fixed-rate-clocks { xxti { compatible = "samsung,clock-xxti"; @@ -499,12 +506,24 @@ }; }; +&clock { + assigned-clocks = <&clock CLK_FOUT_EPLL>; + assigned-clock-rates = <49152000>; +}; + +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-parents = <&clock CLK_FOUT_EPLL>; +}; + &i2c_3 { status = "okay"; - wm1811a@1a { + wm1811: codec@1a { compatible = "wlf,wm1811"; reg = <0x1a>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + clock-names = "MCLK1"; AVDD2-supply = <&main_dc_reg>; CPVDD-supply = <&main_dc_reg>; @@ -540,9 +559,15 @@ }; &i2s0 { + assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; + assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>; status = "okay"; }; +&i2s0_bus { + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>; +}; + &mixer { status = "okay"; };
Add sound node and the clock configurations for the I2S controller for audio support on the Exynos5250 SoC Arndale boards with WM1811 based audio daugther board. We need to increase drive strength of the I2S bus, otherwise the audio CODEC doesn't work. Likely the CODEC's master clock is the main issue here. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> --- arch/arm/boot/dts/exynos5250-arndale.dts | 27 +++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-)