Message ID | 20190923161411.9236-6-krzk@kernel.org (mailing list archive) |
---|---|
State | Accepted |
Headers | show |
Series | [v4,1/8] dt-bindings: timer: Convert Exynos MCT bindings to json-schema | expand |
On 23.09.2019 18:14, Krzysztof Kozlowski wrote: > Multi Core Timer node has interrupts routed to two different parents - > GIC and combiner. This was modeled with a interrupt-map within a > subnode but can be expressed in an easier and more common way, directly > in the node itself. > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Works fine on Arndale and Snow boards. > > --- > > Not tested. > > Changes since v3: > 1. Use interrupts-extended instead of interrupts-map. > --- > arch/arm/boot/dts/exynos5250.dtsi | 23 ++++++----------------- > 1 file changed, 6 insertions(+), 17 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi > index 7a01349317a3..a549eafd2c64 100644 > --- a/arch/arm/boot/dts/exynos5250.dtsi > +++ b/arch/arm/boot/dts/exynos5250.dtsi > @@ -236,25 +236,14 @@ > timer@101c0000 { > compatible = "samsung,exynos4210-mct"; > reg = <0x101C0000 0x800>; > - interrupt-controller; > - #interrupt-cells = <2>; > - interrupt-parent = <&mct_map>; > - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, > - <4 0>, <5 0>; > clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; > clock-names = "fin_pll", "mct"; > - > - mct_map: mct-map { > - #interrupt-cells = <2>; > - #address-cells = <0>; > - #size-cells = <0>; > - interrupt-map = <0x0 0 &combiner 23 3>, > - <0x1 0 &combiner 23 4>, > - <0x2 0 &combiner 25 2>, > - <0x3 0 &combiner 25 3>, > - <0x4 0 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>, > - <0x5 0 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>; > - }; > + interrupts-extended = <&combiner 23 3>, > + <&combiner 23 4>, > + <&combiner 25 2>, > + <&combiner 25 3>, > + <&gic 0 120 IRQ_TYPE_LEVEL_HIGH>, > + <&gic 0 121 IRQ_TYPE_LEVEL_HIGH>; > }; > > pinctrl_0: pinctrl@11400000 { Best regards
On Tue, 24 Sep 2019 at 08:58, Marek Szyprowski <m.szyprowski@samsung.com> wrote: > > > On 23.09.2019 18:14, Krzysztof Kozlowski wrote: > > Multi Core Timer node has interrupts routed to two different parents - > > GIC and combiner. This was modeled with a interrupt-map within a > > subnode but can be expressed in an easier and more common way, directly > > in the node itself. > > > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> > > Works fine on Arndale and Snow boards. Thanks for testing!
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 7a01349317a3..a549eafd2c64 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -236,25 +236,14 @@ timer@101c0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&mct_map>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, - <4 0>, <5 0>; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; clock-names = "fin_pll", "mct"; - - mct_map: mct-map { - #interrupt-cells = <2>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0x0 0 &combiner 23 3>, - <0x1 0 &combiner 23 4>, - <0x2 0 &combiner 25 2>, - <0x3 0 &combiner 25 3>, - <0x4 0 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>, - <0x5 0 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>; - }; + interrupts-extended = <&combiner 23 3>, + <&combiner 23 4>, + <&combiner 25 2>, + <&combiner 25 3>, + <&gic 0 120 IRQ_TYPE_LEVEL_HIGH>, + <&gic 0 121 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_0: pinctrl@11400000 {
Multi Core Timer node has interrupts routed to two different parents - GIC and combiner. This was modeled with a interrupt-map within a subnode but can be expressed in an easier and more common way, directly in the node itself. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- Not tested. Changes since v3: 1. Use interrupts-extended instead of interrupts-map. --- arch/arm/boot/dts/exynos5250.dtsi | 23 ++++++----------------- 1 file changed, 6 insertions(+), 17 deletions(-)