| Message ID | 20190927184352.28759-4-glaroque@baylibre.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support of New Amlogic temperature sensor for G12 SoCs | expand |
On 27/09/2019 20:43, Guillaume La Roque wrote: > Add cpu and ddr temperature sensors for G12 Socs > > Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > Tested-by: Christian Hewitt <christianshewitt@gmail.com> > Tested-by: Kevin Hilman <khilman@baylibre.com> > Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> > --- > .../boot/dts/amlogic/meson-g12-common.dtsi | 20 +++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi > index 38d70ce1cfc7..0660d9ef6a86 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi > @@ -1353,6 +1353,26 @@ > }; > }; > > + cpu_temp: temperature-sensor@34800 { > + compatible = "amlogic,g12a-cpu-thermal", > + "amlogic,g12a-thermal"; > + reg = <0x0 0x34800 0x0 0x50>; > + interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>; > + clocks = <&clkc CLKID_TS>; > + #thermal-sensor-cells = <0>; > + amlogic,ao-secure = <&sec_AO>; > + }; > + > + ddr_temp: temperature-sensor@34c00 { > + compatible = "amlogic,g12a-ddr-thermal", > + "amlogic,g12a-thermal"; > + reg = <0x0 0x34c00 0x0 0x50>; > + interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>; > + clocks = <&clkc CLKID_TS>; > + #thermal-sensor-cells = <0>; > + amlogic,ao-secure = <&sec_AO>; > + }; > + > usb2_phy0: phy@36000 { > compatible = "amlogic,g12a-usb2-phy"; > reg = <0x0 0x36000 0x0 0x2000>; > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
On Sat, Sep 28, 2019 at 12:14 AM Guillaume La Roque <glaroque@baylibre.com> wrote: > > Add cpu and ddr temperature sensors for G12 Socs > > Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > Tested-by: Christian Hewitt <christianshewitt@gmail.com> > Tested-by: Kevin Hilman <khilman@baylibre.com> > Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> > --- > .../boot/dts/amlogic/meson-g12-common.dtsi | 20 +++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi > index 38d70ce1cfc7..0660d9ef6a86 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi > @@ -1353,6 +1353,26 @@ > }; > }; > > + cpu_temp: temperature-sensor@34800 { > + compatible = "amlogic,g12a-cpu-thermal", > + "amlogic,g12a-thermal"; > + reg = <0x0 0x34800 0x0 0x50>; > + interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>; > + clocks = <&clkc CLKID_TS>; > + #thermal-sensor-cells = <0>; > + amlogic,ao-secure = <&sec_AO>; > + }; > + > + ddr_temp: temperature-sensor@34c00 { > + compatible = "amlogic,g12a-ddr-thermal", > + "amlogic,g12a-thermal"; > + reg = <0x0 0x34c00 0x0 0x50>; > + interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>; > + clocks = <&clkc CLKID_TS>; > + #thermal-sensor-cells = <0>; > + amlogic,ao-secure = <&sec_AO>; > + }; > + > usb2_phy0: phy@36000 { > compatible = "amlogic,g12a-usb2-phy"; > reg = <0x0 0x36000 0x0 0x2000>; > -- > 2.17.1 >
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 38d70ce1cfc7..0660d9ef6a86 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -1353,6 +1353,26 @@ }; }; + cpu_temp: temperature-sensor@34800 { + compatible = "amlogic,g12a-cpu-thermal", + "amlogic,g12a-thermal"; + reg = <0x0 0x34800 0x0 0x50>; + interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_TS>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; + + ddr_temp: temperature-sensor@34c00 { + compatible = "amlogic,g12a-ddr-thermal", + "amlogic,g12a-thermal"; + reg = <0x0 0x34c00 0x0 0x50>; + interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_TS>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; + usb2_phy0: phy@36000 { compatible = "amlogic,g12a-usb2-phy"; reg = <0x0 0x36000 0x0 0x2000>;