| Message ID | 20190924093609.22895-2-horms+renesas@verge.net.au (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | dt-bindings: bus: simple-pm-bus, renesas-bsc: convert bindings to json-schema | expand |
On Tue, Sep 24, 2019 at 11:36:07AM +0200, Simon Horman wrote: > Convert Simple Power-Managed Bus bindings documentation to json-schema. > > As a side effect of this change only simple-pm-bus is used in example. A > follow-up patch will provide an example for the separately documented > Renesas Bus State Controller (BSC) that uses "renesas,bsc-sh73a0" and > "renesas,bsc" compat strings. > > Signed-off-by: Simon Horman <horms+renesas@verge.net.au> > --- > * Based on v5.3 > * Tested using: > # ARCH=arm64 make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/bus/simple-pm-bus.yaml > # ARCH=arm make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/bus/simple-pm-bus.yaml > > v2 > * Add SPDX line > * Remove extra blank line > * Add $nodename > * Remove extra leading space in compatible > * Update compatible to allow override by other schemas > * Allow #size-cells to be 1 or 2 > * Do not limit ranges or clocks to 1 item > * Add anyOf requirement on ranges or clocks > * Update example based on msm8996.dtsi > --- > .../devicetree/bindings/bus/simple-pm-bus.txt | 44 ------------- > .../devicetree/bindings/bus/simple-pm-bus.yaml | 75 ++++++++++++++++++++++ > 2 files changed, 75 insertions(+), 44 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/bus/simple-pm-bus.txt > create mode 100644 Documentation/devicetree/bindings/bus/simple-pm-bus.yaml > > diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.txt b/Documentation/devicetree/bindings/bus/simple-pm-bus.txt > deleted file mode 100644 > index 6f15037131ed..000000000000 > --- a/Documentation/devicetree/bindings/bus/simple-pm-bus.txt > +++ /dev/null > @@ -1,44 +0,0 @@ > -Simple Power-Managed Bus > -======================== > - > -A Simple Power-Managed Bus is a transparent bus that doesn't need a real > -driver, as it's typically initialized by the boot loader. > - > -However, its bus controller is part of a PM domain, or under the control of a > -functional clock. Hence, the bus controller's PM domain and/or clock must be > -enabled for child devices connected to the bus (either on-SoC or externally) > -to function. > - > -While "simple-pm-bus" follows the "simple-bus" set of properties, as specified > -in the Devicetree Specification, it is not an extension of "simple-bus". > - > - > -Required properties: > - - compatible: Must contain at least "simple-pm-bus". > - Must not contain "simple-bus". > - It's recommended to let this be preceded by one or more > - vendor-specific compatible values. > - - #address-cells, #size-cells, ranges: Must describe the mapping between > - parent address and child address spaces. > - > -Optional platform-specific properties for clock or PM domain control (at least > -one of them is required): > - - clocks: Must contain a reference to the functional clock(s), > - - power-domains: Must contain a reference to the PM domain. > -Please refer to the binding documentation for the clock and/or PM domain > -providers for more details. > - > - > -Example: > - > - bsc: bus@fec10000 { > - compatible = "renesas,bsc-sh73a0", "renesas,bsc", > - "simple-pm-bus"; > - #address-cells = <1>; > - #size-cells = <1>; > - ranges = <0 0 0x20000000>; > - reg = <0xfec10000 0x400>; > - interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&zb_clk>; > - power-domains = <&pd_a4s>; > - }; > diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml > new file mode 100644 > index 000000000000..598b71d779b1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml > @@ -0,0 +1,75 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Simple Power-Managed Bus > + > +maintainers: > + - Geert Uytterhoeven <geert+renesas@glider.be> > + > +description: | > + A Simple Power-Managed Bus is a transparent bus that doesn't need a real > + driver, as it's typically initialized by the boot loader. > + > + However, its bus controller is part of a PM domain, or under the control > + of a functional clock. Hence, the bus controller's PM domain and/or > + clock must be enabled for child devices connected to the bus (either > + on-SoC or externally) to function. > + > + While "simple-pm-bus" follows the "simple-bus" set of properties, as > + specified in the Devicetree Specification, it is not an extension of > + "simple-bus". > + > +properties: > + $nodename: > + pattern: "^bus([@-][0-9a-f]+)?$" Why the '-' (bus-)? That's only for a few cases where there's no addressing like i2c-gpio. > + > + compatible: > + contains: > + const: simple-pm-bus > + description: > + Shall contain "simple-pm-bus" in addition to a optional bus-specific > + compatible strings defined in individual pm-bus bindings. > + > + '#address-cells': > + const: 1 This too can be 2 cells... > + > + '#size-cells': > + enum: [ 1, 2 ] > + > + ranges: true > + > + clocks: true > + # Functional clocks > + # Required if power-domains is absent, optional otherwise > + > + power-domains: > + # Required if clocks is absent, optional otherwise > + minItems: 1 > + > +required: > + - compatible > + - '#address-cells' > + - '#size-cells' > + - ranges > + > +anyOf: > + - required: > + - clocks > + - required: > + - power-domains > + > +examples: > + - | > + #include <dt-bindings/clock/qcom,gcc-msm8996.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + > + bus { > + power-domains = <&gcc AGGRE0_NOC_GDSC>; > + compatible = "simple-pm-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + }; > -- > 2.11.0 >
On Fri, Sep 27, 2019 at 01:38:44PM -0500, Rob Herring wrote: > On Tue, Sep 24, 2019 at 11:36:07AM +0200, Simon Horman wrote: > > Convert Simple Power-Managed Bus bindings documentation to json-schema. > > > > As a side effect of this change only simple-pm-bus is used in example. A > > follow-up patch will provide an example for the separately documented > > Renesas Bus State Controller (BSC) that uses "renesas,bsc-sh73a0" and > > "renesas,bsc" compat strings. > > > > Signed-off-by: Simon Horman <horms+renesas@verge.net.au> > > --- > > * Based on v5.3 > > * Tested using: > > # ARCH=arm64 make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/bus/simple-pm-bus.yaml > > # ARCH=arm make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/bus/simple-pm-bus.yaml > > > > v2 > > * Add SPDX line > > * Remove extra blank line > > * Add $nodename > > * Remove extra leading space in compatible > > * Update compatible to allow override by other schemas > > * Allow #size-cells to be 1 or 2 > > * Do not limit ranges or clocks to 1 item > > * Add anyOf requirement on ranges or clocks > > * Update example based on msm8996.dtsi > > --- > > .../devicetree/bindings/bus/simple-pm-bus.txt | 44 ------------- > > .../devicetree/bindings/bus/simple-pm-bus.yaml | 75 ++++++++++++++++++++++ > > 2 files changed, 75 insertions(+), 44 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/bus/simple-pm-bus.txt > > create mode 100644 Documentation/devicetree/bindings/bus/simple-pm-bus.yaml > > > > diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.txt b/Documentation/devicetree/bindings/bus/simple-pm-bus.txt > > deleted file mode 100644 > > index 6f15037131ed..000000000000 > > --- a/Documentation/devicetree/bindings/bus/simple-pm-bus.txt > > +++ /dev/null > > @@ -1,44 +0,0 @@ > > -Simple Power-Managed Bus > > -======================== > > - > > -A Simple Power-Managed Bus is a transparent bus that doesn't need a real > > -driver, as it's typically initialized by the boot loader. > > - > > -However, its bus controller is part of a PM domain, or under the control of a > > -functional clock. Hence, the bus controller's PM domain and/or clock must be > > -enabled for child devices connected to the bus (either on-SoC or externally) > > -to function. > > - > > -While "simple-pm-bus" follows the "simple-bus" set of properties, as specified > > -in the Devicetree Specification, it is not an extension of "simple-bus". > > - > > - > > -Required properties: > > - - compatible: Must contain at least "simple-pm-bus". > > - Must not contain "simple-bus". > > - It's recommended to let this be preceded by one or more > > - vendor-specific compatible values. > > - - #address-cells, #size-cells, ranges: Must describe the mapping between > > - parent address and child address spaces. > > - > > -Optional platform-specific properties for clock or PM domain control (at least > > -one of them is required): > > - - clocks: Must contain a reference to the functional clock(s), > > - - power-domains: Must contain a reference to the PM domain. > > -Please refer to the binding documentation for the clock and/or PM domain > > -providers for more details. > > - > > - > > -Example: > > - > > - bsc: bus@fec10000 { > > - compatible = "renesas,bsc-sh73a0", "renesas,bsc", > > - "simple-pm-bus"; > > - #address-cells = <1>; > > - #size-cells = <1>; > > - ranges = <0 0 0x20000000>; > > - reg = <0xfec10000 0x400>; > > - interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; > > - clocks = <&zb_clk>; > > - power-domains = <&pd_a4s>; > > - }; > > diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml > > new file mode 100644 > > index 000000000000..598b71d779b1 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml > > @@ -0,0 +1,75 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Simple Power-Managed Bus > > + > > +maintainers: > > + - Geert Uytterhoeven <geert+renesas@glider.be> > > + > > +description: | > > + A Simple Power-Managed Bus is a transparent bus that doesn't need a real > > + driver, as it's typically initialized by the boot loader. > > + > > + However, its bus controller is part of a PM domain, or under the control > > + of a functional clock. Hence, the bus controller's PM domain and/or > > + clock must be enabled for child devices connected to the bus (either > > + on-SoC or externally) to function. > > + > > + While "simple-pm-bus" follows the "simple-bus" set of properties, as > > + specified in the Devicetree Specification, it is not an extension of > > + "simple-bus". > > + > > +properties: > > + $nodename: > > + pattern: "^bus([@-][0-9a-f]+)?$" > > Why the '-' (bus-)? That's only for a few cases where there's no > addressing like i2c-gpio. Thanks, I will drop the '-'. > > > + > > + compatible: > > + contains: > > + const: simple-pm-bus > > + description: > > + Shall contain "simple-pm-bus" in addition to a optional bus-specific > > + compatible strings defined in individual pm-bus bindings. > > + > > + '#address-cells': > > + const: 1 > > This too can be 2 cells... Thanks, I'll fix that. > > + > > + '#size-cells': > > + enum: [ 1, 2 ] > > + > > + ranges: true > > + > > + clocks: true > > + # Functional clocks > > + # Required if power-domains is absent, optional otherwise > > + > > + power-domains: > > + # Required if clocks is absent, optional otherwise > > + minItems: 1 > > + > > +required: > > + - compatible > > + - '#address-cells' > > + - '#size-cells' > > + - ranges > > + > > +anyOf: > > + - required: > > + - clocks > > + - required: > > + - power-domains > > + > > +examples: > > + - | > > + #include <dt-bindings/clock/qcom,gcc-msm8996.h> > > + #include <dt-bindings/interrupt-controller/irq.h> > > + > > + bus { > > + power-domains = <&gcc AGGRE0_NOC_GDSC>; > > + compatible = "simple-pm-bus"; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges; > > + }; > > -- > > 2.11.0 > > >
diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.txt b/Documentation/devicetree/bindings/bus/simple-pm-bus.txt deleted file mode 100644 index 6f15037131ed..000000000000 --- a/Documentation/devicetree/bindings/bus/simple-pm-bus.txt +++ /dev/null @@ -1,44 +0,0 @@ -Simple Power-Managed Bus -======================== - -A Simple Power-Managed Bus is a transparent bus that doesn't need a real -driver, as it's typically initialized by the boot loader. - -However, its bus controller is part of a PM domain, or under the control of a -functional clock. Hence, the bus controller's PM domain and/or clock must be -enabled for child devices connected to the bus (either on-SoC or externally) -to function. - -While "simple-pm-bus" follows the "simple-bus" set of properties, as specified -in the Devicetree Specification, it is not an extension of "simple-bus". - - -Required properties: - - compatible: Must contain at least "simple-pm-bus". - Must not contain "simple-bus". - It's recommended to let this be preceded by one or more - vendor-specific compatible values. - - #address-cells, #size-cells, ranges: Must describe the mapping between - parent address and child address spaces. - -Optional platform-specific properties for clock or PM domain control (at least -one of them is required): - - clocks: Must contain a reference to the functional clock(s), - - power-domains: Must contain a reference to the PM domain. -Please refer to the binding documentation for the clock and/or PM domain -providers for more details. - - -Example: - - bsc: bus@fec10000 { - compatible = "renesas,bsc-sh73a0", "renesas,bsc", - "simple-pm-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0x20000000>; - reg = <0xfec10000 0x400>; - interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&zb_clk>; - power-domains = <&pd_a4s>; - }; diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml new file mode 100644 index 000000000000..598b71d779b1 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Simple Power-Managed Bus + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: | + A Simple Power-Managed Bus is a transparent bus that doesn't need a real + driver, as it's typically initialized by the boot loader. + + However, its bus controller is part of a PM domain, or under the control + of a functional clock. Hence, the bus controller's PM domain and/or + clock must be enabled for child devices connected to the bus (either + on-SoC or externally) to function. + + While "simple-pm-bus" follows the "simple-bus" set of properties, as + specified in the Devicetree Specification, it is not an extension of + "simple-bus". + +properties: + $nodename: + pattern: "^bus([@-][0-9a-f]+)?$" + + compatible: + contains: + const: simple-pm-bus + description: + Shall contain "simple-pm-bus" in addition to a optional bus-specific + compatible strings defined in individual pm-bus bindings. + + '#address-cells': + const: 1 + + '#size-cells': + enum: [ 1, 2 ] + + ranges: true + + clocks: true + # Functional clocks + # Required if power-domains is absent, optional otherwise + + power-domains: + # Required if clocks is absent, optional otherwise + minItems: 1 + +required: + - compatible + - '#address-cells' + - '#size-cells' + - ranges + +anyOf: + - required: + - clocks + - required: + - power-domains + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8996.h> + #include <dt-bindings/interrupt-controller/irq.h> + + bus { + power-domains = <&gcc AGGRE0_NOC_GDSC>; + compatible = "simple-pm-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + };
Convert Simple Power-Managed Bus bindings documentation to json-schema. As a side effect of this change only simple-pm-bus is used in example. A follow-up patch will provide an example for the separately documented Renesas Bus State Controller (BSC) that uses "renesas,bsc-sh73a0" and "renesas,bsc" compat strings. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- * Based on v5.3 * Tested using: # ARCH=arm64 make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/bus/simple-pm-bus.yaml # ARCH=arm make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/bus/simple-pm-bus.yaml v2 * Add SPDX line * Remove extra blank line * Add $nodename * Remove extra leading space in compatible * Update compatible to allow override by other schemas * Allow #size-cells to be 1 or 2 * Do not limit ranges or clocks to 1 item * Add anyOf requirement on ranges or clocks * Update example based on msm8996.dtsi --- .../devicetree/bindings/bus/simple-pm-bus.txt | 44 ------------- .../devicetree/bindings/bus/simple-pm-bus.yaml | 75 ++++++++++++++++++++++ 2 files changed, 75 insertions(+), 44 deletions(-) delete mode 100644 Documentation/devicetree/bindings/bus/simple-pm-bus.txt create mode 100644 Documentation/devicetree/bindings/bus/simple-pm-bus.yaml