| Message ID | 20191001100122.17730-4-richardw.yang@linux.intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | migration/postcopy: cleanup related to postcopy | expand |
* Wei Yang (richardw.yang@linux.intel.com) wrote: > Currently, we set PostcopyState blindly to RUNNING, even we found the > previous state is not LISTENING. This will lead to a corner case. > > First let's look at the code flow: > > qemu_loadvm_state_main() > ret = loadvm_process_command() > loadvm_postcopy_handle_run() > return -1; > if (ret < 0) { > if (postcopy_state_get() == POSTCOPY_INCOMING_RUNNING) > ... > } > > From above snippet, the corner case is loadvm_postcopy_handle_run() > always sets state to RUNNING. And then it checks the previous state. If > the previous state is not LISTENING, it will return -1. But at this > moment, PostcopyState is already been set to RUNNING. > > Then ret is checked in qemu_loadvm_state_main(), when it is -1 > PostcopyState is checked. Current logic would pause postcopy and retry > if PostcopyState is RUNNING. This is not what we expect, because > postcopy is not active yet. > > This patch makes sure state is set to RUNNING only previous state is > LISTENING by introducing an old_state parameter in postcopy_state_set(). > New state only would be set when current state equals to old_state. > > Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> OK, it's a shame to use a pointer there, but it works. Note, something else; using '-1' as the return value and checking for it is something we do a lot; but in this case it's an example of an error we could never recover from so it never makes sense to try and recover. We should probably look at different types of error. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Dave > --- > migration/migration.c | 2 +- > migration/postcopy-ram.c | 13 +++++++++---- > migration/postcopy-ram.h | 3 ++- > migration/savevm.c | 11 ++++++----- > 4 files changed, 18 insertions(+), 11 deletions(-) > > diff --git a/migration/migration.c b/migration/migration.c > index 34d5e66f06..369cf3826e 100644 > --- a/migration/migration.c > +++ b/migration/migration.c > @@ -447,7 +447,7 @@ static void process_incoming_migration_co(void *opaque) > assert(mis->from_src_file); > mis->migration_incoming_co = qemu_coroutine_self(); > mis->largest_page_size = qemu_ram_pagesize_largest(); > - postcopy_state_set(POSTCOPY_INCOMING_NONE); > + postcopy_state_set(POSTCOPY_INCOMING_NONE, NULL); > migrate_set_state(&mis->state, MIGRATION_STATUS_NONE, > MIGRATION_STATUS_ACTIVE); > ret = qemu_loadvm_state(mis->from_src_file); > diff --git a/migration/postcopy-ram.c b/migration/postcopy-ram.c > index b24c4a10c2..8f741d636d 100644 > --- a/migration/postcopy-ram.c > +++ b/migration/postcopy-ram.c > @@ -577,7 +577,7 @@ int postcopy_ram_incoming_cleanup(MigrationIncomingState *mis) > } > } > > - postcopy_state_set(POSTCOPY_INCOMING_END); > + postcopy_state_set(POSTCOPY_INCOMING_END, NULL); > > if (mis->postcopy_tmp_page) { > munmap(mis->postcopy_tmp_page, mis->largest_page_size); > @@ -626,7 +626,7 @@ int postcopy_ram_prepare_discard(MigrationIncomingState *mis) > return -1; > } > > - postcopy_state_set(POSTCOPY_INCOMING_DISCARD); > + postcopy_state_set(POSTCOPY_INCOMING_DISCARD, NULL); > > return 0; > } > @@ -1457,9 +1457,14 @@ PostcopyState postcopy_state_get(void) > } > > /* Set the state and return the old state */ > -PostcopyState postcopy_state_set(PostcopyState new_state) > +PostcopyState postcopy_state_set(PostcopyState new_state, > + const PostcopyState *old_state) > { > - return atomic_xchg(&incoming_postcopy_state, new_state); > + if (!old_state) { > + return atomic_xchg(&incoming_postcopy_state, new_state); > + } else { > + return atomic_cmpxchg(&incoming_postcopy_state, *old_state, new_state); > + } > } > > /* Register a handler for external shared memory postcopy > diff --git a/migration/postcopy-ram.h b/migration/postcopy-ram.h > index d2668cc820..e3dde32155 100644 > --- a/migration/postcopy-ram.h > +++ b/migration/postcopy-ram.h > @@ -109,7 +109,8 @@ void *postcopy_get_tmp_page(MigrationIncomingState *mis); > > PostcopyState postcopy_state_get(void); > /* Set the state and return the old state */ > -PostcopyState postcopy_state_set(PostcopyState new_state); > +PostcopyState postcopy_state_set(PostcopyState new_state, > + const PostcopyState *old_state); > > void postcopy_fault_thread_notify(MigrationIncomingState *mis); > > diff --git a/migration/savevm.c b/migration/savevm.c > index f3292eb003..45474d9c95 100644 > --- a/migration/savevm.c > +++ b/migration/savevm.c > @@ -1599,7 +1599,7 @@ enum LoadVMExitCodes { > static int loadvm_postcopy_handle_advise(MigrationIncomingState *mis, > uint16_t len) > { > - PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_ADVISE); > + PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_ADVISE, NULL); > uint64_t remote_pagesize_summary, local_pagesize_summary, remote_tps; > Error *local_err = NULL; > > @@ -1628,7 +1628,7 @@ static int loadvm_postcopy_handle_advise(MigrationIncomingState *mis, > } > > if (!postcopy_ram_supported_by_host(mis)) { > - postcopy_state_set(POSTCOPY_INCOMING_NONE); > + postcopy_state_set(POSTCOPY_INCOMING_NONE, NULL); > return -1; > } > > @@ -1841,7 +1841,7 @@ static void *postcopy_ram_listen_thread(void *opaque) > /* After this message we must be able to immediately receive postcopy data */ > static int loadvm_postcopy_handle_listen(MigrationIncomingState *mis) > { > - PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_LISTENING); > + PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_LISTENING, NULL); > trace_loadvm_postcopy_handle_listen(); > Error *local_err = NULL; > > @@ -1929,10 +1929,11 @@ static void loadvm_postcopy_handle_run_bh(void *opaque) > /* After all discards we can start running and asking for pages */ > static int loadvm_postcopy_handle_run(MigrationIncomingState *mis) > { > - PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_RUNNING); > + PostcopyState old_ps = POSTCOPY_INCOMING_LISTENING; > + PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_RUNNING, &old_ps); > > trace_loadvm_postcopy_handle_run(); > - if (ps != POSTCOPY_INCOMING_LISTENING) { > + if (ps != old_ps) { > error_report("CMD_POSTCOPY_RUN in wrong postcopy state (%d)", ps); > return -1; > } > -- > 2.17.1 > -- Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
On Tue, Oct 08, 2019 at 05:40:46PM +0100, Dr. David Alan Gilbert wrote: >* Wei Yang (richardw.yang@linux.intel.com) wrote: >> Currently, we set PostcopyState blindly to RUNNING, even we found the >> previous state is not LISTENING. This will lead to a corner case. >> >> First let's look at the code flow: >> >> qemu_loadvm_state_main() >> ret = loadvm_process_command() >> loadvm_postcopy_handle_run() >> return -1; >> if (ret < 0) { >> if (postcopy_state_get() == POSTCOPY_INCOMING_RUNNING) >> ... >> } >> >> From above snippet, the corner case is loadvm_postcopy_handle_run() >> always sets state to RUNNING. And then it checks the previous state. If >> the previous state is not LISTENING, it will return -1. But at this >> moment, PostcopyState is already been set to RUNNING. >> >> Then ret is checked in qemu_loadvm_state_main(), when it is -1 >> PostcopyState is checked. Current logic would pause postcopy and retry >> if PostcopyState is RUNNING. This is not what we expect, because >> postcopy is not active yet. >> >> This patch makes sure state is set to RUNNING only previous state is >> LISTENING by introducing an old_state parameter in postcopy_state_set(). >> New state only would be set when current state equals to old_state. >> >> Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> > >OK, it's a shame to use a pointer there, but it works. You mean second parameter of postcopy_state_set()? I don't have a better idea. Or we introduce a new state POSTCOPY_INCOMING_NOCHECK. Do you feel better with this? >Note, something else; using '-1' as the return value and checking for it >is something we do a lot; but in this case it's an example of an error >we could never recover from so it never makes sense to try and recover. >We should probably look at different types of error. > > >Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> > >Dave > >> --- >> migration/migration.c | 2 +- >> migration/postcopy-ram.c | 13 +++++++++---- >> migration/postcopy-ram.h | 3 ++- >> migration/savevm.c | 11 ++++++----- >> 4 files changed, 18 insertions(+), 11 deletions(-) >> >> diff --git a/migration/migration.c b/migration/migration.c >> index 34d5e66f06..369cf3826e 100644 >> --- a/migration/migration.c >> +++ b/migration/migration.c >> @@ -447,7 +447,7 @@ static void process_incoming_migration_co(void *opaque) >> assert(mis->from_src_file); >> mis->migration_incoming_co = qemu_coroutine_self(); >> mis->largest_page_size = qemu_ram_pagesize_largest(); >> - postcopy_state_set(POSTCOPY_INCOMING_NONE); >> + postcopy_state_set(POSTCOPY_INCOMING_NONE, NULL); >> migrate_set_state(&mis->state, MIGRATION_STATUS_NONE, >> MIGRATION_STATUS_ACTIVE); >> ret = qemu_loadvm_state(mis->from_src_file); >> diff --git a/migration/postcopy-ram.c b/migration/postcopy-ram.c >> index b24c4a10c2..8f741d636d 100644 >> --- a/migration/postcopy-ram.c >> +++ b/migration/postcopy-ram.c >> @@ -577,7 +577,7 @@ int postcopy_ram_incoming_cleanup(MigrationIncomingState *mis) >> } >> } >> >> - postcopy_state_set(POSTCOPY_INCOMING_END); >> + postcopy_state_set(POSTCOPY_INCOMING_END, NULL); >> >> if (mis->postcopy_tmp_page) { >> munmap(mis->postcopy_tmp_page, mis->largest_page_size); >> @@ -626,7 +626,7 @@ int postcopy_ram_prepare_discard(MigrationIncomingState *mis) >> return -1; >> } >> >> - postcopy_state_set(POSTCOPY_INCOMING_DISCARD); >> + postcopy_state_set(POSTCOPY_INCOMING_DISCARD, NULL); >> >> return 0; >> } >> @@ -1457,9 +1457,14 @@ PostcopyState postcopy_state_get(void) >> } >> >> /* Set the state and return the old state */ >> -PostcopyState postcopy_state_set(PostcopyState new_state) >> +PostcopyState postcopy_state_set(PostcopyState new_state, >> + const PostcopyState *old_state) >> { >> - return atomic_xchg(&incoming_postcopy_state, new_state); >> + if (!old_state) { >> + return atomic_xchg(&incoming_postcopy_state, new_state); >> + } else { >> + return atomic_cmpxchg(&incoming_postcopy_state, *old_state, new_state); >> + } >> } >> >> /* Register a handler for external shared memory postcopy >> diff --git a/migration/postcopy-ram.h b/migration/postcopy-ram.h >> index d2668cc820..e3dde32155 100644 >> --- a/migration/postcopy-ram.h >> +++ b/migration/postcopy-ram.h >> @@ -109,7 +109,8 @@ void *postcopy_get_tmp_page(MigrationIncomingState *mis); >> >> PostcopyState postcopy_state_get(void); >> /* Set the state and return the old state */ >> -PostcopyState postcopy_state_set(PostcopyState new_state); >> +PostcopyState postcopy_state_set(PostcopyState new_state, >> + const PostcopyState *old_state); >> >> void postcopy_fault_thread_notify(MigrationIncomingState *mis); >> >> diff --git a/migration/savevm.c b/migration/savevm.c >> index f3292eb003..45474d9c95 100644 >> --- a/migration/savevm.c >> +++ b/migration/savevm.c >> @@ -1599,7 +1599,7 @@ enum LoadVMExitCodes { >> static int loadvm_postcopy_handle_advise(MigrationIncomingState *mis, >> uint16_t len) >> { >> - PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_ADVISE); >> + PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_ADVISE, NULL); >> uint64_t remote_pagesize_summary, local_pagesize_summary, remote_tps; >> Error *local_err = NULL; >> >> @@ -1628,7 +1628,7 @@ static int loadvm_postcopy_handle_advise(MigrationIncomingState *mis, >> } >> >> if (!postcopy_ram_supported_by_host(mis)) { >> - postcopy_state_set(POSTCOPY_INCOMING_NONE); >> + postcopy_state_set(POSTCOPY_INCOMING_NONE, NULL); >> return -1; >> } >> >> @@ -1841,7 +1841,7 @@ static void *postcopy_ram_listen_thread(void *opaque) >> /* After this message we must be able to immediately receive postcopy data */ >> static int loadvm_postcopy_handle_listen(MigrationIncomingState *mis) >> { >> - PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_LISTENING); >> + PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_LISTENING, NULL); >> trace_loadvm_postcopy_handle_listen(); >> Error *local_err = NULL; >> >> @@ -1929,10 +1929,11 @@ static void loadvm_postcopy_handle_run_bh(void *opaque) >> /* After all discards we can start running and asking for pages */ >> static int loadvm_postcopy_handle_run(MigrationIncomingState *mis) >> { >> - PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_RUNNING); >> + PostcopyState old_ps = POSTCOPY_INCOMING_LISTENING; >> + PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_RUNNING, &old_ps); >> >> trace_loadvm_postcopy_handle_run(); >> - if (ps != POSTCOPY_INCOMING_LISTENING) { >> + if (ps != old_ps) { >> error_report("CMD_POSTCOPY_RUN in wrong postcopy state (%d)", ps); >> return -1; >> } >> -- >> 2.17.1 >> >-- >Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
On Wed, Oct 09, 2019 at 09:02:04AM +0800, Wei Yang wrote: > On Tue, Oct 08, 2019 at 05:40:46PM +0100, Dr. David Alan Gilbert wrote: > >* Wei Yang (richardw.yang@linux.intel.com) wrote: > >> Currently, we set PostcopyState blindly to RUNNING, even we found the > >> previous state is not LISTENING. This will lead to a corner case. > >> > >> First let's look at the code flow: > >> > >> qemu_loadvm_state_main() > >> ret = loadvm_process_command() > >> loadvm_postcopy_handle_run() > >> return -1; > >> if (ret < 0) { > >> if (postcopy_state_get() == POSTCOPY_INCOMING_RUNNING) > >> ... > >> } > >> > >> From above snippet, the corner case is loadvm_postcopy_handle_run() > >> always sets state to RUNNING. And then it checks the previous state. If > >> the previous state is not LISTENING, it will return -1. But at this > >> moment, PostcopyState is already been set to RUNNING. > >> > >> Then ret is checked in qemu_loadvm_state_main(), when it is -1 > >> PostcopyState is checked. Current logic would pause postcopy and retry > >> if PostcopyState is RUNNING. This is not what we expect, because > >> postcopy is not active yet. > >> > >> This patch makes sure state is set to RUNNING only previous state is > >> LISTENING by introducing an old_state parameter in postcopy_state_set(). > >> New state only would be set when current state equals to old_state. > >> > >> Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> > > > >OK, it's a shame to use a pointer there, but it works. > > You mean second parameter of postcopy_state_set()? > > I don't have a better idea. Or we introduce a new state > POSTCOPY_INCOMING_NOCHECK. Do you feel better with this? Maybe simply fix loadvm_postcopy_handle_run() to set the state after the POSTCOPY_INCOMING_LISTENING check? > > >Note, something else; using '-1' as the return value and checking for it > >is something we do a lot; but in this case it's an example of an error > >we could never recover from so it never makes sense to try and recover. > >We should probably look at different types of error. It is true that we might hang on some real errors, but IMHO it might be no where better to quit QEMU if we're in postcopy... (What I'm thinking in mind here is that sometimes even if postcopy failed we might still have a chance to recover a full VM by dumping both src/dst of the during-postcopy VM instances and manually merge them by black magic, in very extreme cases) Regards,
On Wed, Oct 09, 2019 at 12:12:25PM +0800, Peter Xu wrote: >On Wed, Oct 09, 2019 at 09:02:04AM +0800, Wei Yang wrote: >> On Tue, Oct 08, 2019 at 05:40:46PM +0100, Dr. David Alan Gilbert wrote: >> >* Wei Yang (richardw.yang@linux.intel.com) wrote: >> >> Currently, we set PostcopyState blindly to RUNNING, even we found the >> >> previous state is not LISTENING. This will lead to a corner case. >> >> >> >> First let's look at the code flow: >> >> >> >> qemu_loadvm_state_main() >> >> ret = loadvm_process_command() >> >> loadvm_postcopy_handle_run() >> >> return -1; >> >> if (ret < 0) { >> >> if (postcopy_state_get() == POSTCOPY_INCOMING_RUNNING) >> >> ... >> >> } >> >> >> >> From above snippet, the corner case is loadvm_postcopy_handle_run() >> >> always sets state to RUNNING. And then it checks the previous state. If >> >> the previous state is not LISTENING, it will return -1. But at this >> >> moment, PostcopyState is already been set to RUNNING. >> >> >> >> Then ret is checked in qemu_loadvm_state_main(), when it is -1 >> >> PostcopyState is checked. Current logic would pause postcopy and retry >> >> if PostcopyState is RUNNING. This is not what we expect, because >> >> postcopy is not active yet. >> >> >> >> This patch makes sure state is set to RUNNING only previous state is >> >> LISTENING by introducing an old_state parameter in postcopy_state_set(). >> >> New state only would be set when current state equals to old_state. >> >> >> >> Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> >> > >> >OK, it's a shame to use a pointer there, but it works. >> >> You mean second parameter of postcopy_state_set()? >> >> I don't have a better idea. Or we introduce a new state >> POSTCOPY_INCOMING_NOCHECK. Do you feel better with this? > >Maybe simply fix loadvm_postcopy_handle_run() to set the state after >the POSTCOPY_INCOMING_LISTENING check? > Set state back to ps if ps is not POSTCOPY_INCOMING_LISTENING? Sounds like another option.
On Wed, Oct 09, 2019 at 01:07:56PM +0800, Wei Yang wrote: > On Wed, Oct 09, 2019 at 12:12:25PM +0800, Peter Xu wrote: > >On Wed, Oct 09, 2019 at 09:02:04AM +0800, Wei Yang wrote: > >> On Tue, Oct 08, 2019 at 05:40:46PM +0100, Dr. David Alan Gilbert wrote: > >> >* Wei Yang (richardw.yang@linux.intel.com) wrote: > >> >> Currently, we set PostcopyState blindly to RUNNING, even we found the > >> >> previous state is not LISTENING. This will lead to a corner case. > >> >> > >> >> First let's look at the code flow: > >> >> > >> >> qemu_loadvm_state_main() > >> >> ret = loadvm_process_command() > >> >> loadvm_postcopy_handle_run() > >> >> return -1; > >> >> if (ret < 0) { > >> >> if (postcopy_state_get() == POSTCOPY_INCOMING_RUNNING) > >> >> ... > >> >> } > >> >> > >> >> From above snippet, the corner case is loadvm_postcopy_handle_run() > >> >> always sets state to RUNNING. And then it checks the previous state. If > >> >> the previous state is not LISTENING, it will return -1. But at this > >> >> moment, PostcopyState is already been set to RUNNING. > >> >> > >> >> Then ret is checked in qemu_loadvm_state_main(), when it is -1 > >> >> PostcopyState is checked. Current logic would pause postcopy and retry > >> >> if PostcopyState is RUNNING. This is not what we expect, because > >> >> postcopy is not active yet. > >> >> > >> >> This patch makes sure state is set to RUNNING only previous state is > >> >> LISTENING by introducing an old_state parameter in postcopy_state_set(). > >> >> New state only would be set when current state equals to old_state. > >> >> > >> >> Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> > >> > > >> >OK, it's a shame to use a pointer there, but it works. > >> > >> You mean second parameter of postcopy_state_set()? > >> > >> I don't have a better idea. Or we introduce a new state > >> POSTCOPY_INCOMING_NOCHECK. Do you feel better with this? > > > >Maybe simply fix loadvm_postcopy_handle_run() to set the state after > >the POSTCOPY_INCOMING_LISTENING check? > > > > Set state back to ps if ps is not POSTCOPY_INCOMING_LISTENING? > > Sounds like another option. Even simpler? ps = postcopy_state_get(); if (ps != INCOMING) return -1; postcopy_state_set(RUNNING); Thanks,
On Wed, Oct 09, 2019 at 01:36:34PM +0800, Peter Xu wrote: >On Wed, Oct 09, 2019 at 01:07:56PM +0800, Wei Yang wrote: >> On Wed, Oct 09, 2019 at 12:12:25PM +0800, Peter Xu wrote: >> >On Wed, Oct 09, 2019 at 09:02:04AM +0800, Wei Yang wrote: >> >> On Tue, Oct 08, 2019 at 05:40:46PM +0100, Dr. David Alan Gilbert wrote: >> >> >* Wei Yang (richardw.yang@linux.intel.com) wrote: >> >> >> Currently, we set PostcopyState blindly to RUNNING, even we found the >> >> >> previous state is not LISTENING. This will lead to a corner case. >> >> >> >> >> >> First let's look at the code flow: >> >> >> >> >> >> qemu_loadvm_state_main() >> >> >> ret = loadvm_process_command() >> >> >> loadvm_postcopy_handle_run() >> >> >> return -1; >> >> >> if (ret < 0) { >> >> >> if (postcopy_state_get() == POSTCOPY_INCOMING_RUNNING) >> >> >> ... >> >> >> } >> >> >> >> >> >> From above snippet, the corner case is loadvm_postcopy_handle_run() >> >> >> always sets state to RUNNING. And then it checks the previous state. If >> >> >> the previous state is not LISTENING, it will return -1. But at this >> >> >> moment, PostcopyState is already been set to RUNNING. >> >> >> >> >> >> Then ret is checked in qemu_loadvm_state_main(), when it is -1 >> >> >> PostcopyState is checked. Current logic would pause postcopy and retry >> >> >> if PostcopyState is RUNNING. This is not what we expect, because >> >> >> postcopy is not active yet. >> >> >> >> >> >> This patch makes sure state is set to RUNNING only previous state is >> >> >> LISTENING by introducing an old_state parameter in postcopy_state_set(). >> >> >> New state only would be set when current state equals to old_state. >> >> >> >> >> >> Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> >> >> > >> >> >OK, it's a shame to use a pointer there, but it works. >> >> >> >> You mean second parameter of postcopy_state_set()? >> >> >> >> I don't have a better idea. Or we introduce a new state >> >> POSTCOPY_INCOMING_NOCHECK. Do you feel better with this? >> > >> >Maybe simply fix loadvm_postcopy_handle_run() to set the state after >> >the POSTCOPY_INCOMING_LISTENING check? >> > >> >> Set state back to ps if ps is not POSTCOPY_INCOMING_LISTENING? >> >> Sounds like another option. > >Even simpler? > > ps = postcopy_state_get(); > if (ps != INCOMING) > return -1; > postcopy_state_set(RUNNING); > Looks good to me. Dave, Do you feel good with it? >Thanks, > >-- >Peter Xu
* Wei Yang (richardw.yang@linux.intel.com) wrote: > On Wed, Oct 09, 2019 at 01:36:34PM +0800, Peter Xu wrote: > >On Wed, Oct 09, 2019 at 01:07:56PM +0800, Wei Yang wrote: > >> On Wed, Oct 09, 2019 at 12:12:25PM +0800, Peter Xu wrote: > >> >On Wed, Oct 09, 2019 at 09:02:04AM +0800, Wei Yang wrote: > >> >> On Tue, Oct 08, 2019 at 05:40:46PM +0100, Dr. David Alan Gilbert wrote: > >> >> >* Wei Yang (richardw.yang@linux.intel.com) wrote: > >> >> >> Currently, we set PostcopyState blindly to RUNNING, even we found the > >> >> >> previous state is not LISTENING. This will lead to a corner case. > >> >> >> > >> >> >> First let's look at the code flow: > >> >> >> > >> >> >> qemu_loadvm_state_main() > >> >> >> ret = loadvm_process_command() > >> >> >> loadvm_postcopy_handle_run() > >> >> >> return -1; > >> >> >> if (ret < 0) { > >> >> >> if (postcopy_state_get() == POSTCOPY_INCOMING_RUNNING) > >> >> >> ... > >> >> >> } > >> >> >> > >> >> >> From above snippet, the corner case is loadvm_postcopy_handle_run() > >> >> >> always sets state to RUNNING. And then it checks the previous state. If > >> >> >> the previous state is not LISTENING, it will return -1. But at this > >> >> >> moment, PostcopyState is already been set to RUNNING. > >> >> >> > >> >> >> Then ret is checked in qemu_loadvm_state_main(), when it is -1 > >> >> >> PostcopyState is checked. Current logic would pause postcopy and retry > >> >> >> if PostcopyState is RUNNING. This is not what we expect, because > >> >> >> postcopy is not active yet. > >> >> >> > >> >> >> This patch makes sure state is set to RUNNING only previous state is > >> >> >> LISTENING by introducing an old_state parameter in postcopy_state_set(). > >> >> >> New state only would be set when current state equals to old_state. > >> >> >> > >> >> >> Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> > >> >> > > >> >> >OK, it's a shame to use a pointer there, but it works. > >> >> > >> >> You mean second parameter of postcopy_state_set()? > >> >> > >> >> I don't have a better idea. Or we introduce a new state > >> >> POSTCOPY_INCOMING_NOCHECK. Do you feel better with this? > >> > > >> >Maybe simply fix loadvm_postcopy_handle_run() to set the state after > >> >the POSTCOPY_INCOMING_LISTENING check? > >> > > >> > >> Set state back to ps if ps is not POSTCOPY_INCOMING_LISTENING? > >> > >> Sounds like another option. > > > >Even simpler? > > > > ps = postcopy_state_get(); > > if (ps != INCOMING) ^^ LISTENING > > return -1; > > postcopy_state_set(RUNNING); > > > > Looks good to me. > > Dave, > > Do you feel good with it? Yes, I think so; it's simpler. Dave > >Thanks, > > > >-- > >Peter Xu > > -- > Wei Yang > Help you, Help me -- Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
On Wed, Oct 09, 2019 at 10:08:42AM +0100, Dr. David Alan Gilbert wrote: >> >> > >> >> >Maybe simply fix loadvm_postcopy_handle_run() to set the state after >> >> >the POSTCOPY_INCOMING_LISTENING check? >> >> > >> >> >> >> Set state back to ps if ps is not POSTCOPY_INCOMING_LISTENING? >> >> >> >> Sounds like another option. >> > >> >Even simpler? >> > >> > ps = postcopy_state_get(); >> > if (ps != INCOMING) > > ^^ LISTENING > oops >> > return -1; >> > postcopy_state_set(RUNNING); >> > >> >> Looks good to me. >> >> Dave, >> >> Do you feel good with it? > >Yes, I think so; it's simpler. > I will prepare v2. >Dave > >> >Thanks, >> > >> >-- >> >Peter Xu >> >> -- >> Wei Yang >> Help you, Help me >-- >Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
diff --git a/migration/migration.c b/migration/migration.c index 34d5e66f06..369cf3826e 100644 --- a/migration/migration.c +++ b/migration/migration.c @@ -447,7 +447,7 @@ static void process_incoming_migration_co(void *opaque) assert(mis->from_src_file); mis->migration_incoming_co = qemu_coroutine_self(); mis->largest_page_size = qemu_ram_pagesize_largest(); - postcopy_state_set(POSTCOPY_INCOMING_NONE); + postcopy_state_set(POSTCOPY_INCOMING_NONE, NULL); migrate_set_state(&mis->state, MIGRATION_STATUS_NONE, MIGRATION_STATUS_ACTIVE); ret = qemu_loadvm_state(mis->from_src_file); diff --git a/migration/postcopy-ram.c b/migration/postcopy-ram.c index b24c4a10c2..8f741d636d 100644 --- a/migration/postcopy-ram.c +++ b/migration/postcopy-ram.c @@ -577,7 +577,7 @@ int postcopy_ram_incoming_cleanup(MigrationIncomingState *mis) } } - postcopy_state_set(POSTCOPY_INCOMING_END); + postcopy_state_set(POSTCOPY_INCOMING_END, NULL); if (mis->postcopy_tmp_page) { munmap(mis->postcopy_tmp_page, mis->largest_page_size); @@ -626,7 +626,7 @@ int postcopy_ram_prepare_discard(MigrationIncomingState *mis) return -1; } - postcopy_state_set(POSTCOPY_INCOMING_DISCARD); + postcopy_state_set(POSTCOPY_INCOMING_DISCARD, NULL); return 0; } @@ -1457,9 +1457,14 @@ PostcopyState postcopy_state_get(void) } /* Set the state and return the old state */ -PostcopyState postcopy_state_set(PostcopyState new_state) +PostcopyState postcopy_state_set(PostcopyState new_state, + const PostcopyState *old_state) { - return atomic_xchg(&incoming_postcopy_state, new_state); + if (!old_state) { + return atomic_xchg(&incoming_postcopy_state, new_state); + } else { + return atomic_cmpxchg(&incoming_postcopy_state, *old_state, new_state); + } } /* Register a handler for external shared memory postcopy diff --git a/migration/postcopy-ram.h b/migration/postcopy-ram.h index d2668cc820..e3dde32155 100644 --- a/migration/postcopy-ram.h +++ b/migration/postcopy-ram.h @@ -109,7 +109,8 @@ void *postcopy_get_tmp_page(MigrationIncomingState *mis); PostcopyState postcopy_state_get(void); /* Set the state and return the old state */ -PostcopyState postcopy_state_set(PostcopyState new_state); +PostcopyState postcopy_state_set(PostcopyState new_state, + const PostcopyState *old_state); void postcopy_fault_thread_notify(MigrationIncomingState *mis); diff --git a/migration/savevm.c b/migration/savevm.c index f3292eb003..45474d9c95 100644 --- a/migration/savevm.c +++ b/migration/savevm.c @@ -1599,7 +1599,7 @@ enum LoadVMExitCodes { static int loadvm_postcopy_handle_advise(MigrationIncomingState *mis, uint16_t len) { - PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_ADVISE); + PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_ADVISE, NULL); uint64_t remote_pagesize_summary, local_pagesize_summary, remote_tps; Error *local_err = NULL; @@ -1628,7 +1628,7 @@ static int loadvm_postcopy_handle_advise(MigrationIncomingState *mis, } if (!postcopy_ram_supported_by_host(mis)) { - postcopy_state_set(POSTCOPY_INCOMING_NONE); + postcopy_state_set(POSTCOPY_INCOMING_NONE, NULL); return -1; } @@ -1841,7 +1841,7 @@ static void *postcopy_ram_listen_thread(void *opaque) /* After this message we must be able to immediately receive postcopy data */ static int loadvm_postcopy_handle_listen(MigrationIncomingState *mis) { - PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_LISTENING); + PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_LISTENING, NULL); trace_loadvm_postcopy_handle_listen(); Error *local_err = NULL; @@ -1929,10 +1929,11 @@ static void loadvm_postcopy_handle_run_bh(void *opaque) /* After all discards we can start running and asking for pages */ static int loadvm_postcopy_handle_run(MigrationIncomingState *mis) { - PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_RUNNING); + PostcopyState old_ps = POSTCOPY_INCOMING_LISTENING; + PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_RUNNING, &old_ps); trace_loadvm_postcopy_handle_run(); - if (ps != POSTCOPY_INCOMING_LISTENING) { + if (ps != old_ps) { error_report("CMD_POSTCOPY_RUN in wrong postcopy state (%d)", ps); return -1; }
Currently, we set PostcopyState blindly to RUNNING, even we found the previous state is not LISTENING. This will lead to a corner case. First let's look at the code flow: qemu_loadvm_state_main() ret = loadvm_process_command() loadvm_postcopy_handle_run() return -1; if (ret < 0) { if (postcopy_state_get() == POSTCOPY_INCOMING_RUNNING) ... } From above snippet, the corner case is loadvm_postcopy_handle_run() always sets state to RUNNING. And then it checks the previous state. If the previous state is not LISTENING, it will return -1. But at this moment, PostcopyState is already been set to RUNNING. Then ret is checked in qemu_loadvm_state_main(), when it is -1 PostcopyState is checked. Current logic would pause postcopy and retry if PostcopyState is RUNNING. This is not what we expect, because postcopy is not active yet. This patch makes sure state is set to RUNNING only previous state is LISTENING by introducing an old_state parameter in postcopy_state_set(). New state only would be set when current state equals to old_state. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> --- migration/migration.c | 2 +- migration/postcopy-ram.c | 13 +++++++++---- migration/postcopy-ram.h | 3 ++- migration/savevm.c | 11 ++++++----- 4 files changed, 18 insertions(+), 11 deletions(-)