| Message ID | 20190722193939.125578-2-dianders@chromium.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | mmc: core: Fix Marvell WiFi reset by adding SDIO API to replug card | expand |
On Mon, 22 Jul 2019 at 21:41, Douglas Anderson <dianders@chromium.org> wrote: > > When using Marvell WiFi SDIO cards, it is not uncommon for Linux WiFi > driver to fully lose the communication channel to the firmware running > on the card. Presumably the firmware on the card has a bug or two in > it and occasionally crashes. > > The Marvell WiFi driver attempts to recover from this problem. > Specifically the driver has the function mwifiex_sdio_card_reset() > which is called when communcation problems are found. That function > attempts to reset the state of things by utilizing the mmc_hw_reset() > function. > > The current solution is a bit complex because the Marvell WiFi driver > needs to manually deinit and reinit the WiFi driver around the reset > call. This means it's going through a bunch of code paths that aren't > normally tested. However, complexity isn't our only problem. The > other (bigger) problem is that Marvell WiFi cards are often combo > WiFi/Bluetooth cards and Bluetooth runs on a second SDIO func. While > the WiFi driver knows that it should re-init its own state around the > mmc_hw_reset() call there is no good way to inform the Bluetooth > driver. That means that in Linux today when you reset the Marvell > WiFi driver you lose all Bluetooth communication. Doh! Thanks for a nice description to the problem! In principle it makes mmc_hw_reset() quite questionable to use for SDIO func drivers, at all. However, let's consider that for later. > > One way to fix the above problems is to leverage a more standard way > to reset the Marvell WiFi card where we go through the same code paths > as card unplug and the card plug. In this patch we introduce a new > API call for doing just that: sdio_trigger_replug(). This API call > will trigger an unplug of the SDIO card followed by a plug of the > card. As part of this the card will be nicely reset. I have been thinking back and forth on this, exploring various options, perhaps adding some callbacks that the core could invoke to inform the SDIO func drivers of what is going on. Although, in the end this boils done to complexity and I think your approach is simply the most superior in regards to this. However, I think there is a few things that we can do to even further simply your approach, let me comment on the code below. > > Signed-off-by: Douglas Anderson <dianders@chromium.org> > Reviewed-by: Matthias Kaehlcke <mka@chromium.org> > --- > > Changes in v2: > - s/routnine/routine (Brian Norris, Matthias Kaehlcke). > - s/contining/containing (Matthias Kaehlcke). > - Add Matthias Reviewed-by tag. > > drivers/mmc/core/core.c | 28 ++++++++++++++++++++++++++-- > drivers/mmc/core/sdio_io.c | 20 ++++++++++++++++++++ > include/linux/mmc/host.h | 15 ++++++++++++++- > include/linux/mmc/sdio_func.h | 2 ++ > 4 files changed, 62 insertions(+), 3 deletions(-) > > diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c > index 221127324709..5da365b1fdb4 100644 > --- a/drivers/mmc/core/core.c > +++ b/drivers/mmc/core/core.c > @@ -2161,6 +2161,12 @@ int mmc_sw_reset(struct mmc_host *host) > } > EXPORT_SYMBOL(mmc_sw_reset); > > +void mmc_trigger_replug(struct mmc_host *host) > +{ > + host->trigger_replug_state = MMC_REPLUG_STATE_UNPLUG; > + _mmc_detect_change(host, 0, false); > +} > + > static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq) > { > host->f_init = freq; > @@ -2214,6 +2220,11 @@ int _mmc_detect_card_removed(struct mmc_host *host) > if (!host->card || mmc_card_removed(host->card)) > return 1; > > + if (host->trigger_replug_state == MMC_REPLUG_STATE_UNPLUG) { > + mmc_card_set_removed(host->card); > + return 1; Do you really need to set state of the card to "removed"? If I understand correctly, what you need is to allow mmc_rescan() to run a second time, in particular for non removable cards. In that path, mmc_rescan should find the card being non-functional, thus it should remove it and then try to re-initialize it again. Etc. Do you want me to send a patch to show you what I mean!? [...] Kind regards Uffe
Hi, On Thu, Oct 10, 2019 at 7:11 AM Ulf Hansson <ulf.hansson@linaro.org> wrote: > > On Mon, 22 Jul 2019 at 21:41, Douglas Anderson <dianders@chromium.org> wrote: > > > > When using Marvell WiFi SDIO cards, it is not uncommon for Linux WiFi > > driver to fully lose the communication channel to the firmware running > > on the card. Presumably the firmware on the card has a bug or two in > > it and occasionally crashes. > > > > The Marvell WiFi driver attempts to recover from this problem. > > Specifically the driver has the function mwifiex_sdio_card_reset() > > which is called when communcation problems are found. That function > > attempts to reset the state of things by utilizing the mmc_hw_reset() > > function. > > > > The current solution is a bit complex because the Marvell WiFi driver > > needs to manually deinit and reinit the WiFi driver around the reset > > call. This means it's going through a bunch of code paths that aren't > > normally tested. However, complexity isn't our only problem. The > > other (bigger) problem is that Marvell WiFi cards are often combo > > WiFi/Bluetooth cards and Bluetooth runs on a second SDIO func. While > > the WiFi driver knows that it should re-init its own state around the > > mmc_hw_reset() call there is no good way to inform the Bluetooth > > driver. That means that in Linux today when you reset the Marvell > > WiFi driver you lose all Bluetooth communication. Doh! > > Thanks for a nice description to the problem! > > In principle it makes mmc_hw_reset() quite questionable to use for > SDIO func drivers, at all. However, let's consider that for later. Yeah, unless you somehow knew that your card would only have one function. > > One way to fix the above problems is to leverage a more standard way > > to reset the Marvell WiFi card where we go through the same code paths > > as card unplug and the card plug. In this patch we introduce a new > > API call for doing just that: sdio_trigger_replug(). This API call > > will trigger an unplug of the SDIO card followed by a plug of the > > card. As part of this the card will be nicely reset. > > I have been thinking back and forth on this, exploring various > options, perhaps adding some callbacks that the core could invoke to > inform the SDIO func drivers of what is going on. > > Although, in the end this boils done to complexity and I think your > approach is simply the most superior in regards to this. However, I > think there is a few things that we can do to even further simply your > approach, let me comment on the code below. Right. Unplugging / re-plugging is sorta gross / inelegant, but it is definitely simpler and nice that it doesn't add so many new code paths. For cases where you're just trying to re-init things with a hammer it works pretty well. > > Signed-off-by: Douglas Anderson <dianders@chromium.org> > > Reviewed-by: Matthias Kaehlcke <mka@chromium.org> > > --- > > > > Changes in v2: > > - s/routnine/routine (Brian Norris, Matthias Kaehlcke). > > - s/contining/containing (Matthias Kaehlcke). > > - Add Matthias Reviewed-by tag. > > > > drivers/mmc/core/core.c | 28 ++++++++++++++++++++++++++-- > > drivers/mmc/core/sdio_io.c | 20 ++++++++++++++++++++ > > include/linux/mmc/host.h | 15 ++++++++++++++- > > include/linux/mmc/sdio_func.h | 2 ++ > > 4 files changed, 62 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c > > index 221127324709..5da365b1fdb4 100644 > > --- a/drivers/mmc/core/core.c > > +++ b/drivers/mmc/core/core.c > > @@ -2161,6 +2161,12 @@ int mmc_sw_reset(struct mmc_host *host) > > } > > EXPORT_SYMBOL(mmc_sw_reset); > > > > +void mmc_trigger_replug(struct mmc_host *host) > > +{ > > + host->trigger_replug_state = MMC_REPLUG_STATE_UNPLUG; > > + _mmc_detect_change(host, 0, false); > > +} > > + > > static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq) > > { > > host->f_init = freq; > > @@ -2214,6 +2220,11 @@ int _mmc_detect_card_removed(struct mmc_host *host) > > if (!host->card || mmc_card_removed(host->card)) > > return 1; > > > > + if (host->trigger_replug_state == MMC_REPLUG_STATE_UNPLUG) { > > + mmc_card_set_removed(host->card); > > + return 1; > > Do you really need to set state of the card to "removed"? > > If I understand correctly, what you need is to allow mmc_rescan() to > run a second time, in particular for non removable cards. > > In that path, mmc_rescan should find the card being non-functional, > thus it should remove it and then try to re-initialize it again. Etc. > > Do you want me to send a patch to show you what I mean!? If you don't mind, that would probably be easiest. I've totally swapped out all of the implementation details of this from my brain now, but if I saw a patch from you it would be easy for me to analyze it and test it. Thanks! -Doug
On Thu, 17 Oct 2019 at 02:22, Doug Anderson <dianders@chromium.org> wrote: > > Hi, > > On Thu, Oct 10, 2019 at 7:11 AM Ulf Hansson <ulf.hansson@linaro.org> wrote: > > > > On Mon, 22 Jul 2019 at 21:41, Douglas Anderson <dianders@chromium.org> wrote: > > > > > > When using Marvell WiFi SDIO cards, it is not uncommon for Linux WiFi > > > driver to fully lose the communication channel to the firmware running > > > on the card. Presumably the firmware on the card has a bug or two in > > > it and occasionally crashes. > > > > > > The Marvell WiFi driver attempts to recover from this problem. > > > Specifically the driver has the function mwifiex_sdio_card_reset() > > > which is called when communcation problems are found. That function > > > attempts to reset the state of things by utilizing the mmc_hw_reset() > > > function. > > > > > > The current solution is a bit complex because the Marvell WiFi driver > > > needs to manually deinit and reinit the WiFi driver around the reset > > > call. This means it's going through a bunch of code paths that aren't > > > normally tested. However, complexity isn't our only problem. The > > > other (bigger) problem is that Marvell WiFi cards are often combo > > > WiFi/Bluetooth cards and Bluetooth runs on a second SDIO func. While > > > the WiFi driver knows that it should re-init its own state around the > > > mmc_hw_reset() call there is no good way to inform the Bluetooth > > > driver. That means that in Linux today when you reset the Marvell > > > WiFi driver you lose all Bluetooth communication. Doh! > > > > Thanks for a nice description to the problem! > > > > In principle it makes mmc_hw_reset() quite questionable to use for > > SDIO func drivers, at all. However, let's consider that for later. > > Yeah, unless you somehow knew that your card would only have one function. > > > > > One way to fix the above problems is to leverage a more standard way > > > to reset the Marvell WiFi card where we go through the same code paths > > > as card unplug and the card plug. In this patch we introduce a new > > > API call for doing just that: sdio_trigger_replug(). This API call > > > will trigger an unplug of the SDIO card followed by a plug of the > > > card. As part of this the card will be nicely reset. > > > > I have been thinking back and forth on this, exploring various > > options, perhaps adding some callbacks that the core could invoke to > > inform the SDIO func drivers of what is going on. > > > > Although, in the end this boils done to complexity and I think your > > approach is simply the most superior in regards to this. However, I > > think there is a few things that we can do to even further simply your > > approach, let me comment on the code below. > > Right. Unplugging / re-plugging is sorta gross / inelegant, but it is > definitely simpler and nice that it doesn't add so many new code > paths. For cases where you're just trying to re-init things with a > hammer it works pretty well. > > > > > Signed-off-by: Douglas Anderson <dianders@chromium.org> > > > Reviewed-by: Matthias Kaehlcke <mka@chromium.org> > > > --- > > > > > > Changes in v2: > > > - s/routnine/routine (Brian Norris, Matthias Kaehlcke). > > > - s/contining/containing (Matthias Kaehlcke). > > > - Add Matthias Reviewed-by tag. > > > > > > drivers/mmc/core/core.c | 28 ++++++++++++++++++++++++++-- > > > drivers/mmc/core/sdio_io.c | 20 ++++++++++++++++++++ > > > include/linux/mmc/host.h | 15 ++++++++++++++- > > > include/linux/mmc/sdio_func.h | 2 ++ > > > 4 files changed, 62 insertions(+), 3 deletions(-) > > > > > > diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c > > > index 221127324709..5da365b1fdb4 100644 > > > --- a/drivers/mmc/core/core.c > > > +++ b/drivers/mmc/core/core.c > > > @@ -2161,6 +2161,12 @@ int mmc_sw_reset(struct mmc_host *host) > > > } > > > EXPORT_SYMBOL(mmc_sw_reset); > > > > > > +void mmc_trigger_replug(struct mmc_host *host) > > > +{ > > > + host->trigger_replug_state = MMC_REPLUG_STATE_UNPLUG; > > > + _mmc_detect_change(host, 0, false); > > > +} > > > + > > > static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq) > > > { > > > host->f_init = freq; > > > @@ -2214,6 +2220,11 @@ int _mmc_detect_card_removed(struct mmc_host *host) > > > if (!host->card || mmc_card_removed(host->card)) > > > return 1; > > > > > > + if (host->trigger_replug_state == MMC_REPLUG_STATE_UNPLUG) { > > > + mmc_card_set_removed(host->card); > > > + return 1; > > > > Do you really need to set state of the card to "removed"? > > > > If I understand correctly, what you need is to allow mmc_rescan() to > > run a second time, in particular for non removable cards. > > > > In that path, mmc_rescan should find the card being non-functional, > > thus it should remove it and then try to re-initialize it again. Etc. > > > > Do you want me to send a patch to show you what I mean!? > > If you don't mind, that would probably be easiest. I've totally > swapped out all of the implementation details of this from my brain > now, but if I saw a patch from you it would be easy for me to analyze > it and test it. Alright, I think I owe you that because of my slow review pase. :-) Patches are coming soon! Kind regards Uffe
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 221127324709..5da365b1fdb4 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2161,6 +2161,12 @@ int mmc_sw_reset(struct mmc_host *host) } EXPORT_SYMBOL(mmc_sw_reset); +void mmc_trigger_replug(struct mmc_host *host) +{ + host->trigger_replug_state = MMC_REPLUG_STATE_UNPLUG; + _mmc_detect_change(host, 0, false); +} + static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq) { host->f_init = freq; @@ -2214,6 +2220,11 @@ int _mmc_detect_card_removed(struct mmc_host *host) if (!host->card || mmc_card_removed(host->card)) return 1; + if (host->trigger_replug_state == MMC_REPLUG_STATE_UNPLUG) { + mmc_card_set_removed(host->card); + return 1; + } + ret = host->bus_ops->alive(host); /* @@ -2326,8 +2337,21 @@ void mmc_rescan(struct work_struct *work) mmc_bus_put(host); mmc_claim_host(host); - if (mmc_card_is_removable(host) && host->ops->get_cd && - host->ops->get_cd(host) == 0) { + + /* + * Move through the state machine if we're triggering an unplug + * followed by a re-plug. + */ + if (host->trigger_replug_state == MMC_REPLUG_STATE_UNPLUG) { + host->trigger_replug_state = MMC_REPLUG_STATE_PLUG; + _mmc_detect_change(host, 0, false); + } else if (host->trigger_replug_state == MMC_REPLUG_STATE_PLUG) { + host->trigger_replug_state = MMC_REPLUG_STATE_NONE; + } + + if (host->trigger_replug_state == MMC_REPLUG_STATE_PLUG || + (mmc_card_is_removable(host) && host->ops->get_cd && + host->ops->get_cd(host) == 0)) { mmc_power_off(host); mmc_release_host(host); goto out; diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c index 2ba00acf64e6..9b96267ac855 100644 --- a/drivers/mmc/core/sdio_io.c +++ b/drivers/mmc/core/sdio_io.c @@ -811,3 +811,23 @@ void sdio_retune_release(struct sdio_func *func) mmc_retune_release(func->card->host); } EXPORT_SYMBOL_GPL(sdio_retune_release); + +/** + * sdio_trigger_replug - trigger an "unplug" + "plug" of the card + * @func: SDIO function attached to host + * + * When you call this function we will schedule events that will + * make it look like the card containing the given SDIO func was + * unplugged and then re-plugged-in. This is as close as possible + * to a full reset of the card that can be achieved. + * + * NOTE: routine will temporarily make the card look as if it is + * removable even if it is marked non-removable. + * + * This function should be called while the host is claimed. + */ +void sdio_trigger_replug(struct sdio_func *func) +{ + mmc_trigger_replug(func->card->host); +} +EXPORT_SYMBOL(sdio_trigger_replug); diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 4a351cb7f20f..40f21b3e6aaf 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -407,6 +407,12 @@ struct mmc_host { bool trigger_card_event; /* card_event necessary */ + /* state machine for triggering unplug/replug */ +#define MMC_REPLUG_STATE_NONE 0 /* not doing unplug/replug */ +#define MMC_REPLUG_STATE_UNPLUG 1 /* do unplug next */ +#define MMC_REPLUG_STATE_PLUG 2 /* do plug next */ + u8 trigger_replug_state; + struct mmc_card *card; /* device attached to this host */ wait_queue_head_t wq; @@ -527,7 +533,12 @@ int mmc_regulator_get_supply(struct mmc_host *mmc); static inline int mmc_card_is_removable(struct mmc_host *host) { - return !(host->caps & MMC_CAP_NONREMOVABLE); + /* + * A non-removable card briefly looks removable if code has forced + * a re-plug of the card. + */ + return host->trigger_replug_state != MMC_REPLUG_STATE_NONE || + !(host->caps & MMC_CAP_NONREMOVABLE); } static inline int mmc_card_keep_power(struct mmc_host *host) @@ -580,4 +591,6 @@ static inline enum dma_data_direction mmc_get_dma_dir(struct mmc_data *data) int mmc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error); int mmc_abort_tuning(struct mmc_host *host, u32 opcode); +void mmc_trigger_replug(struct mmc_host *host); + #endif /* LINUX_MMC_HOST_H */ diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h index 5a177f7a83c3..0d6c73768ae3 100644 --- a/include/linux/mmc/sdio_func.h +++ b/include/linux/mmc/sdio_func.h @@ -173,4 +173,6 @@ extern void sdio_retune_crc_enable(struct sdio_func *func); extern void sdio_retune_hold_now(struct sdio_func *func); extern void sdio_retune_release(struct sdio_func *func); +extern void sdio_trigger_replug(struct sdio_func *func); + #endif /* LINUX_MMC_SDIO_FUNC_H */