| Message ID | 20191008223657.163366-1-evgreen@chromium.org (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | 363c53875aef8fce69d4a2d0873919ccc7d9e2ad |
| Headers | show |
| Series | Input: synaptics-rmi4 - Avoid processing unknown IRQs | expand |
Hi Evan, On 10/8/19 3:36 PM, Evan Green wrote: > rmi_process_interrupt_requests() calls handle_nested_irq() for > each interrupt status bit it finds. If the irq domain mapping for > this bit had not yet been set up, then it ends up calling > handle_nested_irq(0), which causes a NULL pointer dereference. > > There's already code that masks the irq_status bits coming out of the > hardware with current_irq_mask, presumably to avoid this situation. > However current_irq_mask seems to more reflect the actual mask set > in the hardware rather than the IRQs software has set up and registered > for. For example, in rmi_driver_reset_handler(), the current_irq_mask > is initialized based on what is read from the hardware. If the reset > value of this mask enables IRQs that Linux has not set up yet, then > we end up in this situation. > > There appears to be a third unused bitmask that used to serve this > purpose, fn_irq_bits. Use that bitmask instead of current_irq_mask > to avoid calling handle_nested_irq() on IRQs that have not yet been > set up. Yes, it looks like the code which ensured that there was a function handler to handle the IRQ was removed when the driver switched to using an irq domain. Setting the fn_irq_bits and using them instead of current_irq_mask in rmi_process_interrupt_requests() makes sense to me. Andrew > Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> > --- > > drivers/input/rmi4/rmi_driver.c | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > > diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c > index 772493b1f665..190b9974526b 100644 > --- a/drivers/input/rmi4/rmi_driver.c > +++ b/drivers/input/rmi4/rmi_driver.c > @@ -146,7 +146,7 @@ static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev) > } > > mutex_lock(&data->irq_mutex); > - bitmap_and(data->irq_status, data->irq_status, data->current_irq_mask, > + bitmap_and(data->irq_status, data->irq_status, data->fn_irq_bits, > data->irq_count); > /* > * At this point, irq_status has all bits that are set in the > @@ -385,6 +385,8 @@ static int rmi_driver_set_irq_bits(struct rmi_device *rmi_dev, > bitmap_copy(data->current_irq_mask, data->new_irq_mask, > data->num_of_irq_regs); > > + bitmap_or(data->fn_irq_bits, data->fn_irq_bits, mask, data->irq_count); > + > error_unlock: > mutex_unlock(&data->irq_mutex); > return error; > @@ -398,6 +400,8 @@ static int rmi_driver_clear_irq_bits(struct rmi_device *rmi_dev, > struct device *dev = &rmi_dev->dev; > > mutex_lock(&data->irq_mutex); > + bitmap_andnot(data->fn_irq_bits, > + data->fn_irq_bits, mask, data->irq_count); > bitmap_andnot(data->new_irq_mask, > data->current_irq_mask, mask, data->irq_count); >
On Fri, Oct 11, 2019 at 09:46:56PM +0000, Andrew Duggan wrote: > Hi Evan, > > On 10/8/19 3:36 PM, Evan Green wrote: > > rmi_process_interrupt_requests() calls handle_nested_irq() for > > each interrupt status bit it finds. If the irq domain mapping for > > this bit had not yet been set up, then it ends up calling > > handle_nested_irq(0), which causes a NULL pointer dereference. > > > > There's already code that masks the irq_status bits coming out of the > > hardware with current_irq_mask, presumably to avoid this situation. > > However current_irq_mask seems to more reflect the actual mask set > > in the hardware rather than the IRQs software has set up and registered > > for. For example, in rmi_driver_reset_handler(), the current_irq_mask > > is initialized based on what is read from the hardware. If the reset > > value of this mask enables IRQs that Linux has not set up yet, then > > we end up in this situation. > > > > There appears to be a third unused bitmask that used to serve this > > purpose, fn_irq_bits. Use that bitmask instead of current_irq_mask > > to avoid calling handle_nested_irq() on IRQs that have not yet been > > set up. > > Yes, it looks like the code which ensured that there was a function > handler to handle the IRQ was removed when the driver switched to using > an irq domain. Setting the fn_irq_bits and using them instead of > current_irq_mask in rmi_process_interrupt_requests() makes sense to me. > > Andrew > > > Signed-off-by: Evan Green <evgreen@chromium.org> > Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Applied, thank you. > > --- > > > > drivers/input/rmi4/rmi_driver.c | 6 +++++- > > 1 file changed, 5 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c > > index 772493b1f665..190b9974526b 100644 > > --- a/drivers/input/rmi4/rmi_driver.c > > +++ b/drivers/input/rmi4/rmi_driver.c > > @@ -146,7 +146,7 @@ static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev) > > } > > > > mutex_lock(&data->irq_mutex); > > - bitmap_and(data->irq_status, data->irq_status, data->current_irq_mask, > > + bitmap_and(data->irq_status, data->irq_status, data->fn_irq_bits, > > data->irq_count); > > /* > > * At this point, irq_status has all bits that are set in the > > @@ -385,6 +385,8 @@ static int rmi_driver_set_irq_bits(struct rmi_device *rmi_dev, > > bitmap_copy(data->current_irq_mask, data->new_irq_mask, > > data->num_of_irq_regs); > > > > + bitmap_or(data->fn_irq_bits, data->fn_irq_bits, mask, data->irq_count); > > + > > error_unlock: > > mutex_unlock(&data->irq_mutex); > > return error; > > @@ -398,6 +400,8 @@ static int rmi_driver_clear_irq_bits(struct rmi_device *rmi_dev, > > struct device *dev = &rmi_dev->dev; > > > > mutex_lock(&data->irq_mutex); > > + bitmap_andnot(data->fn_irq_bits, > > + data->fn_irq_bits, mask, data->irq_count); > > bitmap_andnot(data->new_irq_mask, > > data->current_irq_mask, mask, data->irq_count); > >
diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c index 772493b1f665..190b9974526b 100644 --- a/drivers/input/rmi4/rmi_driver.c +++ b/drivers/input/rmi4/rmi_driver.c @@ -146,7 +146,7 @@ static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev) } mutex_lock(&data->irq_mutex); - bitmap_and(data->irq_status, data->irq_status, data->current_irq_mask, + bitmap_and(data->irq_status, data->irq_status, data->fn_irq_bits, data->irq_count); /* * At this point, irq_status has all bits that are set in the @@ -385,6 +385,8 @@ static int rmi_driver_set_irq_bits(struct rmi_device *rmi_dev, bitmap_copy(data->current_irq_mask, data->new_irq_mask, data->num_of_irq_regs); + bitmap_or(data->fn_irq_bits, data->fn_irq_bits, mask, data->irq_count); + error_unlock: mutex_unlock(&data->irq_mutex); return error; @@ -398,6 +400,8 @@ static int rmi_driver_clear_irq_bits(struct rmi_device *rmi_dev, struct device *dev = &rmi_dev->dev; mutex_lock(&data->irq_mutex); + bitmap_andnot(data->fn_irq_bits, + data->fn_irq_bits, mask, data->irq_count); bitmap_andnot(data->new_irq_mask, data->current_irq_mask, mask, data->irq_count);
rmi_process_interrupt_requests() calls handle_nested_irq() for each interrupt status bit it finds. If the irq domain mapping for this bit had not yet been set up, then it ends up calling handle_nested_irq(0), which causes a NULL pointer dereference. There's already code that masks the irq_status bits coming out of the hardware with current_irq_mask, presumably to avoid this situation. However current_irq_mask seems to more reflect the actual mask set in the hardware rather than the IRQs software has set up and registered for. For example, in rmi_driver_reset_handler(), the current_irq_mask is initialized based on what is read from the hardware. If the reset value of this mask enables IRQs that Linux has not set up yet, then we end up in this situation. There appears to be a third unused bitmask that used to serve this purpose, fn_irq_bits. Use that bitmask instead of current_irq_mask to avoid calling handle_nested_irq() on IRQs that have not yet been set up. Signed-off-by: Evan Green <evgreen@chromium.org> --- drivers/input/rmi4/rmi_driver.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)