diff mbox series

[1/3] dt-bindings: media: ti-vpe: Document VPE driver

Message ID 20191009175628.20570-2-bparrot@ti.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: dra7: add vpe nodes | expand

Commit Message

Benoit Parrot Oct. 9, 2019, 5:56 p.m. UTC
Device Tree bindings for the Video Processing Engine (VPE) driver.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 .../devicetree/bindings/media/ti-vpe.txt      | 48 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 49 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/ti-vpe.txt

Comments

Rob Herring Oct. 15, 2019, 10:29 p.m. UTC | #1
On Wed, Oct 09, 2019 at 12:56:26PM -0500, Benoit Parrot wrote:
> Device Tree bindings for the Video Processing Engine (VPE) driver.
> 
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> ---
>  .../devicetree/bindings/media/ti-vpe.txt      | 48 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  2 files changed, 49 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/ti-vpe.txt

Please convert to DT schema format.

> 
> diff --git a/Documentation/devicetree/bindings/media/ti-vpe.txt b/Documentation/devicetree/bindings/media/ti-vpe.txt
> new file mode 100644
> index 000000000000..b2942fa8c3ea
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/ti-vpe.txt
> @@ -0,0 +1,48 @@
> +Texas Instruments DRA7x VIDEO PROCESSING ENGINE (VPE)
> +------------------------------------------------------
> +
> +The Video Processing Engine (VPE) is a key component for image post
> +processing applications. VPE consist of a single memory to memory
> +path which can perform chroma up/down sampling, deinterlacing,
> +scaling and color space conversion.
> +
> +Required properties:
> +- compatible: must be "ti,vpe"

Needs to have SoC specific compatibles.

> +- reg:	physical base address and length of the registers set for the 4
> +	memory regions required;
> +- reg-names: name associated with the memory regions described is <reg>;

The names need to be documented.

> +- interrupts: should contain IRQ line for VPE;
> +
> +Example:
> +
> +	target-module@1d0010 {                  /* 0x489d0000, ap 27 30.0 */
> +		compatible = "ti,sysc-omap4", "ti,sysc";
> +		reg = <0x1d0010 0x4>;
> +		reg-names = "sysc";
> +		ti,sysc-midle = <SYSC_IDLE_FORCE>,
> +				<SYSC_IDLE_NO>,
> +				<SYSC_IDLE_SMART>;
> +		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> +				<SYSC_IDLE_NO>,
> +				<SYSC_IDLE_SMART>;
> +		clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
> +		clock-names = "fck";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0x1d0000 0x10000>;

All this is outside the scope of this binding.

> +
> +		vpe: vpe@0 {
> +			compatible = "ti,vpe";
> +			reg = <0x0000 0x120>,
> +			      <0x0700 0x80>,
> +			      <0x5700 0x18>,
> +			      <0xd000 0x400>;
> +			reg-names = "vpe_top",
> +				    "sc",
> +				    "csc",
> +				    "vpdma";
> +			interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;

> +			#address-cells = <1>;
> +			#size-cells = <0>;

Not documented, nor needed as there are no child nodes.

> +		};
> +	};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8598f49fa2c8..63dcda51f8ae 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -16299,6 +16299,7 @@ W:	http://linuxtv.org/
>  Q:	http://patchwork.linuxtv.org/project/linux-media/list/
>  S:	Maintained
>  F:	drivers/media/platform/ti-vpe/
> +F:	Documentation/devicetree/bindings/media/ti-vpe.txt
>  
>  TI WILINK WIRELESS DRIVERS
>  L:	linux-wireless@vger.kernel.org
> -- 
> 2.17.1
>
Benoit Parrot Oct. 16, 2019, 1:22 p.m. UTC | #2
Rob Herring <robh@kernel.org> wrote on Tue [2019-Oct-15 17:29:47 -0500]:
> On Wed, Oct 09, 2019 at 12:56:26PM -0500, Benoit Parrot wrote:
> > Device Tree bindings for the Video Processing Engine (VPE) driver.
> > 
> > Signed-off-by: Benoit Parrot <bparrot@ti.com>
> > ---
> >  .../devicetree/bindings/media/ti-vpe.txt      | 48 +++++++++++++++++++
> >  MAINTAINERS                                   |  1 +
> >  2 files changed, 49 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/ti-vpe.txt
> 
> Please convert to DT schema format.

I can do that.
Before posting/merging a .yaml, are we supposed to be able to pass these?
# make dt_binding_check
# make dtbs_check

Because currently with 5.4-rc3 these fails.

Is there a way to run these "test command" target a specific .yaml and not
the whole set?

> 
> > 
> > diff --git a/Documentation/devicetree/bindings/media/ti-vpe.txt b/Documentation/devicetree/bindings/media/ti-vpe.txt
> > new file mode 100644
> > index 000000000000..b2942fa8c3ea
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/ti-vpe.txt
> > @@ -0,0 +1,48 @@
> > +Texas Instruments DRA7x VIDEO PROCESSING ENGINE (VPE)
> > +------------------------------------------------------
> > +
> > +The Video Processing Engine (VPE) is a key component for image post
> > +processing applications. VPE consist of a single memory to memory
> > +path which can perform chroma up/down sampling, deinterlacing,
> > +scaling and color space conversion.
> > +
> > +Required properties:
> > +- compatible: must be "ti,vpe"
> 
> Needs to have SoC specific compatibles.

Yes, I'll fix that.

> 
> > +- reg:	physical base address and length of the registers set for the 4
> > +	memory regions required;
> > +- reg-names: name associated with the memory regions described is <reg>;
> 
> The names need to be documented.

Ok.

> 
> > +- interrupts: should contain IRQ line for VPE;
> > +
> > +Example:
> > +
> > +	target-module@1d0010 {                  /* 0x489d0000, ap 27 30.0 */
> > +		compatible = "ti,sysc-omap4", "ti,sysc";
> > +		reg = <0x1d0010 0x4>;
> > +		reg-names = "sysc";
> > +		ti,sysc-midle = <SYSC_IDLE_FORCE>,
> > +				<SYSC_IDLE_NO>,
> > +				<SYSC_IDLE_SMART>;
> > +		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> > +				<SYSC_IDLE_NO>,
> > +				<SYSC_IDLE_SMART>;
> > +		clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
> > +		clock-names = "fck";
> > +		#address-cells = <1>;
> > +		#size-cells = <1>;
> > +		ranges = <0x0 0x1d0000 0x10000>;
> 
> All this is outside the scope of this binding.

OK I was not sure if the whole interconnect thing was needed in the example
or not.

> 
> > +
> > +		vpe: vpe@0 {
> > +			compatible = "ti,vpe";
> > +			reg = <0x0000 0x120>,
> > +			      <0x0700 0x80>,
> > +			      <0x5700 0x18>,
> > +			      <0xd000 0x400>;
> > +			reg-names = "vpe_top",
> > +				    "sc",
> > +				    "csc",
> > +				    "vpdma";
> > +			interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> 
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> 
> Not documented, nor needed as there are no child nodes.

Yeah, I'll remove that.

> 
> > +		};
> > +	};
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 8598f49fa2c8..63dcda51f8ae 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -16299,6 +16299,7 @@ W:	http://linuxtv.org/
> >  Q:	http://patchwork.linuxtv.org/project/linux-media/list/
> >  S:	Maintained
> >  F:	drivers/media/platform/ti-vpe/
> > +F:	Documentation/devicetree/bindings/media/ti-vpe.txt

Now with the dt_schemas, I noticed that the maintainer's name is part of
the yaml file. Do we still need to add this to the MAINTAINERS file as
well?

Benoit


> >  
> >  TI WILINK WIRELESS DRIVERS
> >  L:	linux-wireless@vger.kernel.org
> > -- 
> > 2.17.1
> >
Rob Herring Oct. 16, 2019, 3:36 p.m. UTC | #3
On Wed, Oct 16, 2019 at 8:20 AM Benoit Parrot <bparrot@ti.com> wrote:
>
> Rob Herring <robh@kernel.org> wrote on Tue [2019-Oct-15 17:29:47 -0500]:
> > On Wed, Oct 09, 2019 at 12:56:26PM -0500, Benoit Parrot wrote:
> > > Device Tree bindings for the Video Processing Engine (VPE) driver.
> > >
> > > Signed-off-by: Benoit Parrot <bparrot@ti.com>
> > > ---
> > >  .../devicetree/bindings/media/ti-vpe.txt      | 48 +++++++++++++++++++
> > >  MAINTAINERS                                   |  1 +
> > >  2 files changed, 49 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/media/ti-vpe.txt
> >
> > Please convert to DT schema format.
>
> I can do that.
> Before posting/merging a .yaml, are we supposed to be able to pass these?
> # make dt_binding_check
> # make dtbs_check

Only dt_binding_check needs to be warning free. It is good to test
your schema with dtbs_check and make sure any warnings seem valid.

> Because currently with 5.4-rc3 these fails.

Yeah, still waiting on regulator and media fixes. :( linux-next is fixed.

> Is there a way to run these "test command" target a specific .yaml and not
> the whole set?

Yes, it's documented in writing-schema.rst. Use DT_SCHEMA_FILES  to
test just your schema file.

[...]

> > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > index 8598f49fa2c8..63dcda51f8ae 100644
> > > --- a/MAINTAINERS
> > > +++ b/MAINTAINERS
> > > @@ -16299,6 +16299,7 @@ W:  http://linuxtv.org/
> > >  Q: http://patchwork.linuxtv.org/project/linux-media/list/
> > >  S: Maintained
> > >  F: drivers/media/platform/ti-vpe/
> > > +F: Documentation/devicetree/bindings/media/ti-vpe.txt
>
> Now with the dt_schemas, I noticed that the maintainer's name is part of
> the yaml file. Do we still need to add this to the MAINTAINERS file as
> well?

Within the schema is really preparation for having schema outside of
the kernel tree and because lots of bindings don't have a MAINTAINERS
entry. So yes, you can still have both.

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/ti-vpe.txt b/Documentation/devicetree/bindings/media/ti-vpe.txt
new file mode 100644
index 000000000000..b2942fa8c3ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti-vpe.txt
@@ -0,0 +1,48 @@ 
+Texas Instruments DRA7x VIDEO PROCESSING ENGINE (VPE)
+------------------------------------------------------
+
+The Video Processing Engine (VPE) is a key component for image post
+processing applications. VPE consist of a single memory to memory
+path which can perform chroma up/down sampling, deinterlacing,
+scaling and color space conversion.
+
+Required properties:
+- compatible: must be "ti,vpe"
+- reg:	physical base address and length of the registers set for the 4
+	memory regions required;
+- reg-names: name associated with the memory regions described is <reg>;
+- interrupts: should contain IRQ line for VPE;
+
+Example:
+
+	target-module@1d0010 {                  /* 0x489d0000, ap 27 30.0 */
+		compatible = "ti,sysc-omap4", "ti,sysc";
+		reg = <0x1d0010 0x4>;
+		reg-names = "sysc";
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>;
+		clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x1d0000 0x10000>;
+
+		vpe: vpe@0 {
+			compatible = "ti,vpe";
+			reg = <0x0000 0x120>,
+			      <0x0700 0x80>,
+			      <0x5700 0x18>,
+			      <0xd000 0x400>;
+			reg-names = "vpe_top",
+				    "sc",
+				    "csc",
+				    "vpdma";
+			interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 8598f49fa2c8..63dcda51f8ae 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16299,6 +16299,7 @@  W:	http://linuxtv.org/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 S:	Maintained
 F:	drivers/media/platform/ti-vpe/
+F:	Documentation/devicetree/bindings/media/ti-vpe.txt
 
 TI WILINK WIRELESS DRIVERS
 L:	linux-wireless@vger.kernel.org