diff mbox series

PCI/PM: Note that PME can be generated from D0

Message ID 20191016194450.68959-1-helgaas@kernel.org (mailing list archive)
State Not Applicable, archived
Headers show
Series PCI/PM: Note that PME can be generated from D0 | expand

Commit Message

Bjorn Helgaas Oct. 16, 2019, 7:44 p.m. UTC
From: Bjorn Helgaas <bhelgaas@google.com>

Per PCIe r5.0 sec 7.5.2.1, PME may be generated from D0, so update
Documentation/power/pci.rst to reflect that.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 Documentation/power/pci.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Rafael J. Wysocki Oct. 17, 2019, 2:25 p.m. UTC | #1
On Wed, Oct 16, 2019 at 9:44 PM Bjorn Helgaas <helgaas@kernel.org> wrote:
>
> From: Bjorn Helgaas <bhelgaas@google.com>
>
> Per PCIe r5.0 sec 7.5.2.1, PME may be generated from D0, so update
> Documentation/power/pci.rst to reflect that.
>
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Good catch:

Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

> ---
>  Documentation/power/pci.rst | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/power/pci.rst b/Documentation/power/pci.rst
> index db41a770a2f5..a90e82c70a3b 100644
> --- a/Documentation/power/pci.rst
> +++ b/Documentation/power/pci.rst
> @@ -130,8 +130,8 @@ a full power-on reset sequence and the power-on defaults are restored to the
>  device by hardware just as at initial power up.
>
>  PCI devices supporting the PCI PM Spec can be programmed to generate PMEs
> -while in a low-power state (D1-D3), but they are not required to be capable
> -of generating PMEs from all supported low-power states.  In particular, the
> +while in any power state (D0-D3), but they are not required to be capable
> +of generating PMEs from all supported power states.  In particular, the
>  capability of generating PMEs from D3cold is optional and depends on the
>  presence of additional voltage (3.3Vaux) allowing the device to remain
>  sufficiently active to generate a wakeup signal.
> --
> 2.23.0.700.g56cf767bdb-goog
>
diff mbox series

Patch

diff --git a/Documentation/power/pci.rst b/Documentation/power/pci.rst
index db41a770a2f5..a90e82c70a3b 100644
--- a/Documentation/power/pci.rst
+++ b/Documentation/power/pci.rst
@@ -130,8 +130,8 @@  a full power-on reset sequence and the power-on defaults are restored to the
 device by hardware just as at initial power up.
 
 PCI devices supporting the PCI PM Spec can be programmed to generate PMEs
-while in a low-power state (D1-D3), but they are not required to be capable
-of generating PMEs from all supported low-power states.  In particular, the
+while in any power state (D0-D3), but they are not required to be capable
+of generating PMEs from all supported power states.  In particular, the
 capability of generating PMEs from D3cold is optional and depends on the
 presence of additional voltage (3.3Vaux) allowing the device to remain
 sufficiently active to generate a wakeup signal.