Message ID | 20191027140549.26272-6-damien.lemoal@wdc.com (mailing list archive) |
---|---|
State | Not Applicable |
Headers | show |
Series | Zone management commands support | expand |
On 27.10.2019 23:05, Damien Le Moal wrote: >From: Ajay Joshi <ajay.joshi@wdc.com> > >Introduce three new ioctl commands BLKOPENZONE, BLKCLOSEZONE and >BLKFINISHZONE to allow applications to control the condition of zones >on a zoned block device through the execution of the REQ_OP_ZONE_OPEN, >REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH operations. > >Contains contributions from Matias Bjorling, Hans Holmberg, >Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig. > >Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com> >Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com> >Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> >Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> >Signed-off-by: Keith Busch <kbusch@kernel.org> >Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> >--- > block/blk-zoned.c | 28 +++++++++++++++++++++++----- > block/ioctl.c | 5 ++++- > include/linux/blkdev.h | 10 +++++----- > include/uapi/linux/blkzoned.h | 17 ++++++++++++++--- > 4 files changed, 46 insertions(+), 14 deletions(-) > >diff --git a/block/blk-zoned.c b/block/blk-zoned.c >index dab34dc48fb6..481eaf7d04d4 100644 >--- a/block/blk-zoned.c >+++ b/block/blk-zoned.c >@@ -357,15 +357,16 @@ int blkdev_report_zones_ioctl(struct block_device *bdev, fmode_t mode, > } > > /* >- * BLKRESETZONE ioctl processing. >+ * BLKRESETZONE, BLKOPENZONE, BLKCLOSEZONE and BLKFINISHZONE ioctl processing. > * Called from blkdev_ioctl. > */ >-int blkdev_reset_zones_ioctl(struct block_device *bdev, fmode_t mode, >- unsigned int cmd, unsigned long arg) >+int blkdev_zone_mgmt_ioctl(struct block_device *bdev, fmode_t mode, >+ unsigned int cmd, unsigned long arg) > { > void __user *argp = (void __user *)arg; > struct request_queue *q; > struct blk_zone_range zrange; >+ enum req_opf op; > > if (!argp) > return -EINVAL; >@@ -386,8 +387,25 @@ int blkdev_reset_zones_ioctl(struct block_device *bdev, fmode_t mode, > if (copy_from_user(&zrange, argp, sizeof(struct blk_zone_range))) > return -EFAULT; > >- return blkdev_zone_mgmt(bdev, REQ_OP_ZONE_RESET, >- zrange.sector, zrange.nr_sectors, GFP_KERNEL); >+ switch (cmd) { >+ case BLKRESETZONE: >+ op = REQ_OP_ZONE_RESET; >+ break; >+ case BLKOPENZONE: >+ op = REQ_OP_ZONE_OPEN; >+ break; >+ case BLKCLOSEZONE: >+ op = REQ_OP_ZONE_CLOSE; >+ break; >+ case BLKFINISHZONE: >+ op = REQ_OP_ZONE_FINISH; >+ break; >+ default: >+ return -ENOTTY; >+ } >+ >+ return blkdev_zone_mgmt(bdev, op, zrange.sector, zrange.nr_sectors, >+ GFP_KERNEL); > } > > static inline unsigned long *blk_alloc_zone_bitmap(int node, >diff --git a/block/ioctl.c b/block/ioctl.c >index 15a0eb80ada9..8756efb1419e 100644 >--- a/block/ioctl.c >+++ b/block/ioctl.c >@@ -532,7 +532,10 @@ int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd, > case BLKREPORTZONE: > return blkdev_report_zones_ioctl(bdev, mode, cmd, arg); > case BLKRESETZONE: >- return blkdev_reset_zones_ioctl(bdev, mode, cmd, arg); >+ case BLKOPENZONE: >+ case BLKCLOSEZONE: >+ case BLKFINISHZONE: >+ return blkdev_zone_mgmt_ioctl(bdev, mode, cmd, arg); > case BLKGETZONESZ: > return put_uint(arg, bdev_zone_sectors(bdev)); > case BLKGETNRZONES: >diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h >index bf797a63388c..dbef541c2530 100644 >--- a/include/linux/blkdev.h >+++ b/include/linux/blkdev.h >@@ -367,8 +367,8 @@ extern int blk_revalidate_disk_zones(struct gendisk *disk); > > extern int blkdev_report_zones_ioctl(struct block_device *bdev, fmode_t mode, > unsigned int cmd, unsigned long arg); >-extern int blkdev_reset_zones_ioctl(struct block_device *bdev, fmode_t mode, >- unsigned int cmd, unsigned long arg); >+extern int blkdev_zone_mgmt_ioctl(struct block_device *bdev, fmode_t mode, >+ unsigned int cmd, unsigned long arg); > > #else /* CONFIG_BLK_DEV_ZONED */ > >@@ -389,9 +389,9 @@ static inline int blkdev_report_zones_ioctl(struct block_device *bdev, > return -ENOTTY; > } > >-static inline int blkdev_reset_zones_ioctl(struct block_device *bdev, >- fmode_t mode, unsigned int cmd, >- unsigned long arg) >+static inline int blkdev_zone_mgmt_ioctl(struct block_device *bdev, >+ fmode_t mode, unsigned int cmd, >+ unsigned long arg) > { > return -ENOTTY; > } >diff --git a/include/uapi/linux/blkzoned.h b/include/uapi/linux/blkzoned.h >index 498eec813494..0cdef67135f0 100644 >--- a/include/uapi/linux/blkzoned.h >+++ b/include/uapi/linux/blkzoned.h >@@ -120,9 +120,11 @@ struct blk_zone_report { > }; > > /** >- * struct blk_zone_range - BLKRESETZONE ioctl request >- * @sector: starting sector of the first zone to issue reset write pointer >- * @nr_sectors: Total number of sectors of 1 or more zones to reset >+ * struct blk_zone_range - BLKRESETZONE/BLKOPENZONE/ >+ * BLKCLOSEZONE/BLKFINISHZONE ioctl >+ * requests >+ * @sector: Starting sector of the first zone to operate on. >+ * @nr_sectors: Total number of sectors of all zones to operate on. > */ > struct blk_zone_range { > __u64 sector; >@@ -139,10 +141,19 @@ struct blk_zone_range { > * sector range. The sector range must be zone aligned. > * @BLKGETZONESZ: Get the device zone size in number of 512 B sectors. > * @BLKGETNRZONES: Get the total number of zones of the device. >+ * @BLKOPENZONE: Open the zones in the specified sector range. >+ * The 512 B sector range must be zone aligned. >+ * @BLKCLOSEZONE: Close the zones in the specified sector range. >+ * The 512 B sector range must be zone aligned. >+ * @BLKFINISHZONE: Mark the zones as full in the specified sector range. >+ * The 512 B sector range must be zone aligned. > */ > #define BLKREPORTZONE _IOWR(0x12, 130, struct blk_zone_report) > #define BLKRESETZONE _IOW(0x12, 131, struct blk_zone_range) > #define BLKGETZONESZ _IOR(0x12, 132, __u32) > #define BLKGETNRZONES _IOR(0x12, 133, __u32) >+#define BLKOPENZONE _IOW(0x12, 134, struct blk_zone_range) >+#define BLKCLOSEZONE _IOW(0x12, 135, struct blk_zone_range) >+#define BLKFINISHZONE _IOW(0x12, 136, struct blk_zone_range) > > #endif /* _UAPI_BLKZONED_H */ >-- >2.21.0 > Looks good. Reviewed-by: Javier González <javier@javigon.com>
Looks good,
Reviewed-by: Christoph Hellwig <hch@lst.de>
diff --git a/block/blk-zoned.c b/block/blk-zoned.c index dab34dc48fb6..481eaf7d04d4 100644 --- a/block/blk-zoned.c +++ b/block/blk-zoned.c @@ -357,15 +357,16 @@ int blkdev_report_zones_ioctl(struct block_device *bdev, fmode_t mode, } /* - * BLKRESETZONE ioctl processing. + * BLKRESETZONE, BLKOPENZONE, BLKCLOSEZONE and BLKFINISHZONE ioctl processing. * Called from blkdev_ioctl. */ -int blkdev_reset_zones_ioctl(struct block_device *bdev, fmode_t mode, - unsigned int cmd, unsigned long arg) +int blkdev_zone_mgmt_ioctl(struct block_device *bdev, fmode_t mode, + unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; struct request_queue *q; struct blk_zone_range zrange; + enum req_opf op; if (!argp) return -EINVAL; @@ -386,8 +387,25 @@ int blkdev_reset_zones_ioctl(struct block_device *bdev, fmode_t mode, if (copy_from_user(&zrange, argp, sizeof(struct blk_zone_range))) return -EFAULT; - return blkdev_zone_mgmt(bdev, REQ_OP_ZONE_RESET, - zrange.sector, zrange.nr_sectors, GFP_KERNEL); + switch (cmd) { + case BLKRESETZONE: + op = REQ_OP_ZONE_RESET; + break; + case BLKOPENZONE: + op = REQ_OP_ZONE_OPEN; + break; + case BLKCLOSEZONE: + op = REQ_OP_ZONE_CLOSE; + break; + case BLKFINISHZONE: + op = REQ_OP_ZONE_FINISH; + break; + default: + return -ENOTTY; + } + + return blkdev_zone_mgmt(bdev, op, zrange.sector, zrange.nr_sectors, + GFP_KERNEL); } static inline unsigned long *blk_alloc_zone_bitmap(int node, diff --git a/block/ioctl.c b/block/ioctl.c index 15a0eb80ada9..8756efb1419e 100644 --- a/block/ioctl.c +++ b/block/ioctl.c @@ -532,7 +532,10 @@ int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd, case BLKREPORTZONE: return blkdev_report_zones_ioctl(bdev, mode, cmd, arg); case BLKRESETZONE: - return blkdev_reset_zones_ioctl(bdev, mode, cmd, arg); + case BLKOPENZONE: + case BLKCLOSEZONE: + case BLKFINISHZONE: + return blkdev_zone_mgmt_ioctl(bdev, mode, cmd, arg); case BLKGETZONESZ: return put_uint(arg, bdev_zone_sectors(bdev)); case BLKGETNRZONES: diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index bf797a63388c..dbef541c2530 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -367,8 +367,8 @@ extern int blk_revalidate_disk_zones(struct gendisk *disk); extern int blkdev_report_zones_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg); -extern int blkdev_reset_zones_ioctl(struct block_device *bdev, fmode_t mode, - unsigned int cmd, unsigned long arg); +extern int blkdev_zone_mgmt_ioctl(struct block_device *bdev, fmode_t mode, + unsigned int cmd, unsigned long arg); #else /* CONFIG_BLK_DEV_ZONED */ @@ -389,9 +389,9 @@ static inline int blkdev_report_zones_ioctl(struct block_device *bdev, return -ENOTTY; } -static inline int blkdev_reset_zones_ioctl(struct block_device *bdev, - fmode_t mode, unsigned int cmd, - unsigned long arg) +static inline int blkdev_zone_mgmt_ioctl(struct block_device *bdev, + fmode_t mode, unsigned int cmd, + unsigned long arg) { return -ENOTTY; } diff --git a/include/uapi/linux/blkzoned.h b/include/uapi/linux/blkzoned.h index 498eec813494..0cdef67135f0 100644 --- a/include/uapi/linux/blkzoned.h +++ b/include/uapi/linux/blkzoned.h @@ -120,9 +120,11 @@ struct blk_zone_report { }; /** - * struct blk_zone_range - BLKRESETZONE ioctl request - * @sector: starting sector of the first zone to issue reset write pointer - * @nr_sectors: Total number of sectors of 1 or more zones to reset + * struct blk_zone_range - BLKRESETZONE/BLKOPENZONE/ + * BLKCLOSEZONE/BLKFINISHZONE ioctl + * requests + * @sector: Starting sector of the first zone to operate on. + * @nr_sectors: Total number of sectors of all zones to operate on. */ struct blk_zone_range { __u64 sector; @@ -139,10 +141,19 @@ struct blk_zone_range { * sector range. The sector range must be zone aligned. * @BLKGETZONESZ: Get the device zone size in number of 512 B sectors. * @BLKGETNRZONES: Get the total number of zones of the device. + * @BLKOPENZONE: Open the zones in the specified sector range. + * The 512 B sector range must be zone aligned. + * @BLKCLOSEZONE: Close the zones in the specified sector range. + * The 512 B sector range must be zone aligned. + * @BLKFINISHZONE: Mark the zones as full in the specified sector range. + * The 512 B sector range must be zone aligned. */ #define BLKREPORTZONE _IOWR(0x12, 130, struct blk_zone_report) #define BLKRESETZONE _IOW(0x12, 131, struct blk_zone_range) #define BLKGETZONESZ _IOR(0x12, 132, __u32) #define BLKGETNRZONES _IOR(0x12, 133, __u32) +#define BLKOPENZONE _IOW(0x12, 134, struct blk_zone_range) +#define BLKCLOSEZONE _IOW(0x12, 135, struct blk_zone_range) +#define BLKFINISHZONE _IOW(0x12, 136, struct blk_zone_range) #endif /* _UAPI_BLKZONED_H */