Message ID | 20191024221416.14197-7-digetx@gmail.com (mailing list archive) |
---|---|
State | Not Applicable, archived |
Headers | show |
Series | NVIDIA Tegra20 CPUFreq driver major update | expand |
On Fri, 25 Oct 2019 01:14:05 +0300, Dmitry Osipenko wrote: > Add device-tree binding that describes CPU frequency-scaling hardware > found on NVIDIA Tegra20/30 SoCs. > > Acked-by: Viresh Kumar <viresh.kumar@linaro.org> > Signed-off-by: Dmitry Osipenko <digetx@gmail.com> > --- > .../cpufreq/nvidia,tegra20-cpufreq.txt | 56 +++++++++++++++++++ > 1 file changed, 56 insertions(+) > create mode 100644 Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt > Reviewed-by: Rob Herring <robh@kernel.org>
30.10.2019 00:42, Rob Herring пишет: > On Fri, 25 Oct 2019 01:14:05 +0300, Dmitry Osipenko wrote: >> Add device-tree binding that describes CPU frequency-scaling hardware >> found on NVIDIA Tegra20/30 SoCs. >> >> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> >> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> >> --- >> .../cpufreq/nvidia,tegra20-cpufreq.txt | 56 +++++++++++++++++++ >> 1 file changed, 56 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt >> > > Reviewed-by: Rob Herring <robh@kernel.org> > Thanks!
diff --git a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt new file mode 100644 index 000000000000..daeca6ae6b76 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt @@ -0,0 +1,56 @@ +Binding for NVIDIA Tegra20 CPUFreq +================================== + +Required properties: +- clocks: Must contain an entry for the CPU clock. + See ../clocks/clock-bindings.txt for details. +- operating-points-v2: See ../bindings/opp/opp.txt for details. +- #cooling-cells: Should be 2. See ../thermal/thermal.txt for details. + +For each opp entry in 'operating-points-v2' table: +- opp-supported-hw: Two bitfields indicating: + On Tegra20: + 1. CPU process ID mask + 2. SoC speedo ID mask + + On Tegra30: + 1. CPU process ID mask + 2. CPU speedo ID mask + + A bitwise AND is performed against these values and if any bit + matches, the OPP gets enabled. + +- opp-microvolt: CPU voltage triplet. + +Optional properties: +- cpu-supply: Phandle to the CPU power supply. + +Example: + regulators { + cpu_reg: regulator0 { + regulator-name = "vdd_cpu"; + }; + }; + + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + + opp@456000000 { + clock-latency-ns = <125000>; + opp-microvolt = <825000 825000 1125000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <456000000>; + }; + + ... + }; + + cpus { + cpu@0 { + compatible = "arm,cortex-a9"; + clocks = <&tegra_car TEGRA20_CLK_CCLK>; + operating-points-v2 = <&cpu0_opp_table>; + cpu-supply = <&cpu_reg>; + #cooling-cells = <2>; + }; + };