diff mbox series

[v2,04/11] mmc: host: omap_hsmmc: add code for special init of wl1251 to get rid of pandora_wl1251_init_card

Message ID 0887d84402f796d1e7361261b88ec6057fbb0065.1571510481.git.hns@goldelico.com (mailing list archive)
State New, archived
Headers show
Series OpenPandora: make wl1251 connected to mmc3 sdio port of OpenPandora work again | expand

Commit Message

H. Nikolaus Schaller Oct. 19, 2019, 6:41 p.m. UTC
Pandora_wl1251_init_card was used to do special pdata based
setup of the sdio mmc interface. This does no longer work with
v4.7 and later. A fix requires a device tree based mmc3 setup.

Therefore we move the special setup to omap_hsmmc.c instead
of calling some pdata supplied init_card function.

The new code checks for a DT child node compatible to wl1251
so it will not affect other MMC3 use cases.

Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: <stable@vger.kernel.org> # 4.7.0
---
 drivers/mmc/host/omap_hsmmc.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

Comments

Ulf Hansson Oct. 30, 2019, 3:51 p.m. UTC | #1
On Sat, 19 Oct 2019 at 20:42, H. Nikolaus Schaller <hns@goldelico.com> wrote:
>
> Pandora_wl1251_init_card was used to do special pdata based
> setup of the sdio mmc interface. This does no longer work with
> v4.7 and later. A fix requires a device tree based mmc3 setup.
>
> Therefore we move the special setup to omap_hsmmc.c instead
> of calling some pdata supplied init_card function.
>
> The new code checks for a DT child node compatible to wl1251
> so it will not affect other MMC3 use cases.
>
> Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")
>
> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
> Cc: <stable@vger.kernel.org> # 4.7.0
> ---
>  drivers/mmc/host/omap_hsmmc.c | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
>
> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
> index 952fa4063ff8..03ba80bcf319 100644
> --- a/drivers/mmc/host/omap_hsmmc.c
> +++ b/drivers/mmc/host/omap_hsmmc.c
> @@ -1512,6 +1512,27 @@ static void omap_hsmmc_init_card(struct mmc_host *mmc, struct mmc_card *card)
>
>         if (mmc_pdata(host)->init_card)
>                 mmc_pdata(host)->init_card(card);
> +       else if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
> +               struct device_node *np = mmc_dev(mmc)->of_node;
> +
> +               np = of_get_compatible_child(np, "ti,wl1251");
> +               if (np) {
> +                       /*
> +                        * We have TI wl1251 attached to MMC3. Pass this information to
> +                        * SDIO core because it can't be probed by normal methods.
> +                        */
> +
> +                       dev_info(host->dev, "found wl1251\n");
> +                       card->quirks |= MMC_QUIRK_NONSTD_SDIO;
> +                       card->cccr.wide_bus = 1;
> +                       card->cis.vendor = 0x104c;
> +                       card->cis.device = 0x9066;
> +                       card->cis.blksize = 512;
> +                       card->cis.max_dtr = 24000000;
> +                       card->ocr = 0x80;

These things should really be figured out by the mmc core during SDIO
card initialization itself, not via the host ops ->init_card()
callback. That is just poor hack, which in the long run should go
away.

Moreover, I think we should add a subnode to the host node in the DT,
to describe the embedded SDIO card, rather than parsing the subnode
for the SDIO func - as that seems wrong to me.

To add a subnode for the SDIO card, we already have a binding that I
think we should extend. Please have a look at
Documentation/devicetree/bindings/mmc/mmc-card.txt.

If you want an example of how to implement this for your case, do a
git grep "broken-hpi" in the driver/mmc/core/, I think it will tell
you more of what I have in mind.

> +                       of_node_put(np);
> +               }
> +       }
>  }
>
>  static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
> --
> 2.19.1
>

Kind regards
Uffe
H. Nikolaus Schaller Oct. 30, 2019, 5:24 p.m. UTC | #2
Hi Ulf,

> Am 30.10.2019 um 16:51 schrieb Ulf Hansson <ulf.hansson@linaro.org>:
> 
>> +
>> +               np = of_get_compatible_child(np, "ti,wl1251");
>> +               if (np) {
>> +                       /*
>> +                        * We have TI wl1251 attached to MMC3. Pass this information to
>> +                        * SDIO core because it can't be probed by normal methods.
>> +                        */
>> +
>> +                       dev_info(host->dev, "found wl1251\n");
>> +                       card->quirks |= MMC_QUIRK_NONSTD_SDIO;
>> +                       card->cccr.wide_bus = 1;
>> +                       card->cis.vendor = 0x104c;
>> +                       card->cis.device = 0x9066;
>> +                       card->cis.blksize = 512;
>> +                       card->cis.max_dtr = 24000000;
>> +                       card->ocr = 0x80;
> 
> These things should really be figured out by the mmc core during SDIO
> card initialization itself, not via the host ops ->init_card()
> callback. That is just poor hack, which in the long run should go
> away.

Yes, I agree.

But I am just the poor guy who is trying to fix really broken code with
as low effort as possible.

I don't even have a significant clue what this code is exactly doing and what
the magic values mean. They were setup by pandora_wl1251_init_card() in the
same way so that I have just moved the code here and make it called in (almost)
the same situation.

> Moreover, I think we should add a subnode to the host node in the DT,
> to describe the embedded SDIO card, rather than parsing the subnode
> for the SDIO func - as that seems wrong to me.

You mean a second subnode?

The wl1251 is the child node of the mmc node and describes the SDIO card.
We just check if it is a wl1251 or e.g. wl1837 or something else or even
no child.

> To add a subnode for the SDIO card, we already have a binding that I
> think we should extend. Please have a look at
> Documentation/devicetree/bindings/mmc/mmc-card.txt.
> 
> If you want an example of how to implement this for your case, do a
> git grep "broken-hpi" in the driver/mmc/core/, I think it will tell
> you more of what I have in mind.

So while I agree that it should be improved in the long run, we should
IMHO fix the hack first (broken since v4.9!), even if it remains a hack
for now. Improving this part seems to be quite independent and focussed
on the mmc subsystem, while the other patches involve other subsystems.

Maybe should we make a REVISIT note in the code? Or add something to
the commit message about the idea how it should be done right?

> 
>> +                       of_node_put(np);
>> +               }
>> +       }
>> }
>> 
>> static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
>> --
>> 2.19.1
>> 
> 
> Kind regards
> Uffe


BR and thanks,
Nikolaus
Ulf Hansson Oct. 31, 2019, 4:23 p.m. UTC | #3
On Wed, 30 Oct 2019 at 18:25, H. Nikolaus Schaller <hns@goldelico.com> wrote:
>
> Hi Ulf,
>
> > Am 30.10.2019 um 16:51 schrieb Ulf Hansson <ulf.hansson@linaro.org>:
> >
> >> +
> >> +               np = of_get_compatible_child(np, "ti,wl1251");
> >> +               if (np) {
> >> +                       /*
> >> +                        * We have TI wl1251 attached to MMC3. Pass this information to
> >> +                        * SDIO core because it can't be probed by normal methods.
> >> +                        */
> >> +
> >> +                       dev_info(host->dev, "found wl1251\n");
> >> +                       card->quirks |= MMC_QUIRK_NONSTD_SDIO;
> >> +                       card->cccr.wide_bus = 1;
> >> +                       card->cis.vendor = 0x104c;
> >> +                       card->cis.device = 0x9066;
> >> +                       card->cis.blksize = 512;
> >> +                       card->cis.max_dtr = 24000000;
> >> +                       card->ocr = 0x80;
> >
> > These things should really be figured out by the mmc core during SDIO
> > card initialization itself, not via the host ops ->init_card()
> > callback. That is just poor hack, which in the long run should go
> > away.
>
> Yes, I agree.
>
> But I am just the poor guy who is trying to fix really broken code with
> as low effort as possible.

I see. Thanks for looking at this mess!

In general, as long as we improve the code, I am happy to move forward.

However, my main concern at this point, is to make sure we get the DT
bindings and the DTS files updated correctly. We don't want to come
back to this again.

>
> I don't even have a significant clue what this code is exactly doing and what
> the magic values mean. They were setup by pandora_wl1251_init_card() in the
> same way so that I have just moved the code here and make it called in (almost)
> the same situation.

Okay!

>
> > Moreover, I think we should add a subnode to the host node in the DT,
> > to describe the embedded SDIO card, rather than parsing the subnode
> > for the SDIO func - as that seems wrong to me.
>
> You mean a second subnode?
>
> The wl1251 is the child node of the mmc node and describes the SDIO card.
> We just check if it is a wl1251 or e.g. wl1837 or something else or even
> no child.

The reason why I brought this up, was because there are sometimes
cases where an SDIO card is shared between more than one SDIO func.
WiFi+Bluetooth for example, but if I am correct, that is not the case
for wl1251?

That said, I am happy to continue with your approach.

>
> > To add a subnode for the SDIO card, we already have a binding that I
> > think we should extend. Please have a look at
> > Documentation/devicetree/bindings/mmc/mmc-card.txt.
> >
> > If you want an example of how to implement this for your case, do a
> > git grep "broken-hpi" in the driver/mmc/core/, I think it will tell
> > you more of what I have in mind.
>
> So while I agree that it should be improved in the long run, we should
> IMHO fix the hack first (broken since v4.9!), even if it remains a hack
> for now. Improving this part seems to be quite independent and focussed
> on the mmc subsystem, while the other patches involve other subsystems.

I agree.

>
> Maybe should we make a REVISIT note in the code? Or add something to
> the commit message about the idea how it should be done right?

Just add a note that we should move this DT parsing of the subnode to
the mmc core, but that we are leaving that as a future improvement.
That's good enough. Then I can have a look as a second step, and when
I get some time, to move this to the mmc core.

However, there is one thing I would like you to add to the series. That is:

In the struct omap_hsmmc_platform_data, there is an ->init_card()
callback. Beyond the changes of this series, there is no longer any
users of that, unless I am mistaken. Going forward, let's make sure it
doesn't get used again, so can you please remove it!?

[...]

Kind regards
Uffe
diff mbox series

Patch

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 952fa4063ff8..03ba80bcf319 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1512,6 +1512,27 @@  static void omap_hsmmc_init_card(struct mmc_host *mmc, struct mmc_card *card)
 
 	if (mmc_pdata(host)->init_card)
 		mmc_pdata(host)->init_card(card);
+	else if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
+		struct device_node *np = mmc_dev(mmc)->of_node;
+
+		np = of_get_compatible_child(np, "ti,wl1251");
+		if (np) {
+			/*
+			 * We have TI wl1251 attached to MMC3. Pass this information to
+			 * SDIO core because it can't be probed by normal methods.
+			 */
+
+			dev_info(host->dev, "found wl1251\n");
+			card->quirks |= MMC_QUIRK_NONSTD_SDIO;
+			card->cccr.wide_bus = 1;
+			card->cis.vendor = 0x104c;
+			card->cis.device = 0x9066;
+			card->cis.blksize = 512;
+			card->cis.max_dtr = 24000000;
+			card->ocr = 0x80;
+			of_node_put(np);
+		}
+	}
 }
 
 static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable)