[4/4] arm64: dts: allwinner: orange-pi-3: Enable USB 3.0 host support

Commit Message

Ondřej Jirman Oct. 20, 2019, 1:42 p.m. UTC

From: Ondrej Jirman <[e-mail]>

Enable Allwinner's USB 3.0 phy and the host controller. Orange Pi 3
board has GL3510 USB 3.0 4-port hub connected to the SoC's USB 3.0
port. All four ports are exposed via USB3-A connectors. VBUS is
always on, since it's powered directly from DCIN (VCC-5V) and
not switchable.

Signed-off-by: Ondrej Jirman <[e-mail]>
---
 arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Maxime Ripard Oct. 21, 2019, 11:09 a.m. UTC | #1

On Sun, Oct 20, 2019 at 03:42:29PM +0200, [e-mail] wrote:
> From: Ondrej Jirman <[e-mail]>
>
> Enable Allwinner's USB 3.0 phy and the host controller. Orange Pi 3
> board has GL3510 USB 3.0 4-port hub connected to the SoC's USB 3.0
> port. All four ports are exposed via USB3-A connectors. VBUS is
> always on, since it's powered directly from DCIN (VCC-5V) and
> not switchable.
>
> Signed-off-by: Ondrej Jirman <[e-mail]>

Those last two patches are fine with me, I'll merge them once the phy
driver will be merged.

Maxime

Ondřej Jirman Nov. 4, 2019, 12:16 p.m. UTC | #2

Hello Maxime,

On Mon, Oct 21, 2019 at 01:09:46PM +0200, Maxime Ripard wrote:
> On Sun, Oct 20, 2019 at 03:42:29PM +0200, [e-mail] wrote:
> > From: Ondrej Jirman <[e-mail]>
> >
> > Enable Allwinner's USB 3.0 phy and the host controller. Orange Pi 3
> > board has GL3510 USB 3.0 4-port hub connected to the SoC's USB 3.0
> > port. All four ports are exposed via USB3-A connectors. VBUS is
> > always on, since it's powered directly from DCIN (VCC-5V) and
> > not switchable.
> >
> > Signed-off-by: Ondrej Jirman <[e-mail]>
> 
> Those last two patches are fine with me, I'll merge them once the phy
> driver will be merged.

PHY driver has been merged. You can now pull these patches too, when
you like.

See here: https://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git/log/?h=next

Thank you,
	o.

> Maxime

Maxime Ripard Nov. 5, 2019, 10:45 a.m. UTC | #3

Hi,

On Mon, Nov 04, 2019 at 01:16:48PM +0100, Ondřej Jirman wrote:
> Hello Maxime,
>
> On Mon, Oct 21, 2019 at 01:09:46PM +0200, Maxime Ripard wrote:
> > On Sun, Oct 20, 2019 at 03:42:29PM +0200, [e-mail] wrote:
> > > From: Ondrej Jirman <[e-mail]>
> > >
> > > Enable Allwinner's USB 3.0 phy and the host controller. Orange Pi 3
> > > board has GL3510 USB 3.0 4-port hub connected to the SoC's USB 3.0
> > > port. All four ports are exposed via USB3-A connectors. VBUS is
> > > always on, since it's powered directly from DCIN (VCC-5V) and
> > > not switchable.
> > >
> > > Signed-off-by: Ondrej Jirman <[e-mail]>
> >
> > Those last two patches are fine with me, I'll merge them once the phy
> > driver will be merged.
>
> PHY driver has been merged. You can now pull these patches too, when
> you like.
>
> See here: https://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git/log/?h=next

Thanks for letting me know, I just applied it.

Maxime

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index eb379cd402ac..259af5b0f1a7 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -94,6 +94,10 @@ 
 	status = "okay";
 };
 
+&dwc3 {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -285,3 +289,7 @@ 
 	usb3_vbus-supply = <&reg_vcc5v>;
 	status = "okay";
 };
+
+&usb3phy {
+	status = "okay";
+};