@@ -18,7 +18,7 @@ an optional sub-node. For "samsung,exynos5433-lpass" compatible this includes:
UART, SLIMBUS, PCM, I2S, DMAC, Timers 0...4, VIC, WDT 0...1 devices.
Bindings of the sub-nodes are described in:
- ../serial/samsung_uart.txt
+ ../serial/samsung_uart.yaml
../sound/samsung-i2s.txt
../dma/arm-pl330.txt
deleted file mode 100644
@@ -1,58 +0,0 @@
-* Samsung's UART Controller
-
-The Samsung's UART controller is used for interfacing SoC with serial
-communicaion devices.
-
-Required properties:
-- compatible: should be one of following:
- - "samsung,exynos4210-uart" - Exynos4210 SoC,
- - "samsung,s3c2410-uart" - compatible with ports present on S3C2410 SoC,
- - "samsung,s3c2412-uart" - compatible with ports present on S3C2412 SoC,
- - "samsung,s3c2440-uart" - compatible with ports present on S3C2440 SoC,
- - "samsung,s3c6400-uart" - compatible with ports present on S3C6400 SoC,
- - "samsung,s5pv210-uart" - compatible with ports present on S5PV210 SoC.
-
-- reg: base physical address of the controller and length of memory mapped
- region.
-
-- interrupts: a single interrupt signal to SoC interrupt controller,
- according to interrupt bindings documentation [1].
-
-- clock-names: input names of clocks used by the controller:
- - "uart" - controller bus clock,
- - "clk_uart_baudN" - Nth baud base clock input (N = 0, 1, ...),
- according to SoC User's Manual (only N = 0 is allowedfor SoCs without
- internal baud clock mux).
-- clocks: phandles and specifiers for all clocks specified in "clock-names"
- property, in the same order, according to clock bindings documentation [2].
-
-[1] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Optional properties:
-- samsung,uart-fifosize: The fifo size supported by the UART channel
-
-Note: Each Samsung UART should have an alias correctly numbered in the
-"aliases" node, according to serialN format, where N is the port number
-(non-negative decimal integer) as specified by User's Manual of respective
-SoC.
-
-Example:
- aliases {
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- };
-
-Example:
- uart1: serial@7f005400 {
- compatible = "samsung,s3c6400-uart";
- reg = <0x7f005400 0x100>;
- interrupt-parent = <&vic1>;
- interrupts = <6>;
- clock-names = "uart", "clk_uart_baud2",
- "clk_uart_baud3";
- clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
- <&clocks SCLK_UART>;
- samsung,uart-fifosize = <16>;
- };
new file mode 100644
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/samsung_uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C, S5P and Exynos SoC UART Controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+ - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+description: |+
+ Each Samsung UART should have an alias correctly numbered in the "aliases"
+ node, according to serialN format, where N is the port number (non-negative
+ decimal integer) as specified by User's Manual of respective SoC.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - samsung,s3c2410-uart
+ - samsung,s3c2412-uart
+ - samsung,s3c2440-uart
+ - samsung,s3c6400-uart
+ - samsung,s5pv210-uart
+ - samsung,exynos4210-uart
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ maxItems: 5
+
+ clock-names:
+ description: N = 0 is allowed for SoCs without internal baud clock mux.
+ minItems: 2
+ maxItems: 5
+ items:
+ - const: uart
+ - pattern: '^clk_uart_baud[0-3]$'
+ - pattern: '^clk_uart_baud[0-3]$'
+ - pattern: '^clk_uart_baud[0-3]$'
+ - pattern: '^clk_uart_baud[0-3]$'
+
+ interrupts:
+ description: RX interrupt and optionally TX interrupt.
+ minItems: 1
+ maxItems: 2
+
+ samsung,uart-fifosize:
+ description: The fifo size supported by the UART channel.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [16, 64, 256]
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - interrupts
+ - reg
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,s3c2410-uart
+ - samsung,s5pv210-uart
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 3
+ clock-names:
+ minItems: 2
+ maxItems: 3
+ items:
+ - const: uart
+ - pattern: '^clk_uart_baud[0-1]$'
+ - pattern: '^clk_uart_baud[0-1]$'
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,exynos4210-uart
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 2
+ clock-names:
+ minItems: 2
+ maxItems: 2
+ items:
+ - const: uart
+ - const: clk_uart_baud0
+
+examples:
+ - |
+ #include <dt-bindings/clock/samsung,s3c64xx-clock.h>
+
+ uart0: serial@7f005000 {
+ compatible = "samsung,s3c6400-uart";
+ reg = <0x7f005000 0x100>;
+ interrupt-parent = <&vic1>;
+ interrupts = <5>;
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+ <&clocks SCLK_UART>;
+ samsung,uart-fifosize = <16>;
+ };
Convert Samsung S3C/S5P/Exynos Serial/UART bindings to DT schema format using json-schema. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- Changes since v1: 1. Simplify 'clock-names' patters after Rob's suggestions, 2. Add description to 'interrupts', 3. Remove 'uniqueItems' where not needed, 4. Remove aliases from example. --- .../bindings/mfd/samsung,exynos5433-lpass.txt | 2 +- .../bindings/serial/samsung_uart.txt | 58 --------- .../bindings/serial/samsung_uart.yaml | 118 ++++++++++++++++++ 3 files changed, 119 insertions(+), 59 deletions(-) delete mode 100644 Documentation/devicetree/bindings/serial/samsung_uart.txt create mode 100644 Documentation/devicetree/bindings/serial/samsung_uart.yaml