| Message ID | 20191028215919.83697-10-john.stultz@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Prereqs for HiKey960 USB support | expand |
Hi, John Stultz <john.stultz@linaro.org> writes: > Support configuring the default role the controller assumes as > host mode when the usb role is USB_ROLE_NONE > > This patch was split out from a larger patch originally by > Yu Chen <chenyu56@huawei.com> > > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Mark Rutland <mark.rutland@arm.com> > CC: ShuFan Lee <shufan_lee@richtek.com> > Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> > Cc: Suzuki K Poulose <suzuki.poulose@arm.com> > Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> > Cc: Yu Chen <chenyu56@huawei.com> > Cc: Felipe Balbi <balbi@kernel.org> > Cc: Hans de Goede <hdegoede@redhat.com> > Cc: Andy Shevchenko <andy.shevchenko@gmail.com> > Cc: Jun Li <lijun.kernel@gmail.com> > Cc: Valentin Schneider <valentin.schneider@arm.com> > Cc: Jack Pham <jackp@codeaurora.org> > Cc: linux-usb@vger.kernel.org > Cc: devicetree@vger.kernel.org > Signed-off-by: John Stultz <john.stultz@linaro.org> > --- > v3: Split this patch out from addition of usb-role-switch > handling > --- > drivers/usb/dwc3/core.h | 3 +++ > drivers/usb/dwc3/drd.c | 20 ++++++++++++++++---- > 2 files changed, 19 insertions(+), 4 deletions(-) > > diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h > index 6f19e9891767..3c879c9ab1aa 100644 > --- a/drivers/usb/dwc3/core.h > +++ b/drivers/usb/dwc3/core.h > @@ -953,6 +953,8 @@ struct dwc3_scratchpad_array { > * - USBPHY_INTERFACE_MODE_UTMI > * - USBPHY_INTERFACE_MODE_UTMIW > * @role_sw: usb_role_switch handle > + * @role_switch_default_mode: default operation mode of controller while > + * usb role is USB_ROLE_NONE. > * @usb2_phy: pointer to USB2 PHY > * @usb3_phy: pointer to USB3 PHY > * @usb2_generic_phy: pointer to USB2 PHY > @@ -1087,6 +1089,7 @@ struct dwc3 { > struct notifier_block edev_nb; > enum usb_phy_interface hsphy_mode; > struct usb_role_switch *role_sw; > + enum usb_dr_mode role_switch_default_mode; > > u32 fladj; > u32 irq_gadget; > diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c > index 61d4fd8aead4..0e3466fe5ac4 100644 > --- a/drivers/usb/dwc3/drd.c > +++ b/drivers/usb/dwc3/drd.c > @@ -489,7 +489,10 @@ static int dwc3_usb_role_switch_set(struct device *dev, enum usb_role role) > mode = DWC3_GCTL_PRTCAP_DEVICE; > break; > default: > - mode = DWC3_GCTL_PRTCAP_DEVICE; > + if (dwc->role_switch_default_mode == USB_DR_MODE_HOST) > + mode = DWC3_GCTL_PRTCAP_HOST; > + else > + mode = DWC3_GCTL_PRTCAP_DEVICE; > break; > } > > @@ -515,7 +518,10 @@ static enum usb_role dwc3_usb_role_switch_get(struct device *dev) > role = dwc->current_otg_role; > break; > default: > - role = USB_ROLE_DEVICE; > + if (dwc->role_switch_default_mode == USB_DR_MODE_HOST) > + role = USB_ROLE_HOST; look at this, we now have 3 different encodings for role which DWC3 needs to understand. One is its own PRTCAP_DIR, then there USB_DR_MODE_* and now USB_ROLE_*, can we make it so that we only have one private encoding and one generic encoding?
On Tue, Oct 29, 2019 at 2:25 AM Felipe Balbi <balbi@kernel.org> wrote: > John Stultz <john.stultz@linaro.org> writes: > > diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c > > index 61d4fd8aead4..0e3466fe5ac4 100644 > > --- a/drivers/usb/dwc3/drd.c > > +++ b/drivers/usb/dwc3/drd.c > > @@ -489,7 +489,10 @@ static int dwc3_usb_role_switch_set(struct device *dev, enum usb_role role) > > mode = DWC3_GCTL_PRTCAP_DEVICE; > > break; > > default: > > - mode = DWC3_GCTL_PRTCAP_DEVICE; > > + if (dwc->role_switch_default_mode == USB_DR_MODE_HOST) > > + mode = DWC3_GCTL_PRTCAP_HOST; > > + else > > + mode = DWC3_GCTL_PRTCAP_DEVICE; > > break; > > } > > > > @@ -515,7 +518,10 @@ static enum usb_role dwc3_usb_role_switch_get(struct device *dev) > > role = dwc->current_otg_role; > > break; > > default: > > - role = USB_ROLE_DEVICE; > > + if (dwc->role_switch_default_mode == USB_DR_MODE_HOST) > > + role = USB_ROLE_HOST; > > look at this, we now have 3 different encodings for role which DWC3 > needs to understand. One is its own PRTCAP_DIR, then there USB_DR_MODE_* > and now USB_ROLE_*, can we make it so that we only have one private > encoding and one generic encoding? And you left out the DWC3_OTG_ROLE_* set too! So I agree it can be easy to muddle up. The enums are *almost* equivalent: include/linux/usb/role.h: enum usb_role { USB_ROLE_NONE, USB_ROLE_HOST, USB_ROLE_DEVICE, }; include/linux/usb/otg.h: enum usb_dr_mode { USB_DR_MODE_UNKNOWN, USB_DR_MODE_HOST, USB_DR_MODE_PERIPHERAL, USB_DR_MODE_OTG, }; But both are widely used: $ git grep USB_ROLE_ | wc -l 123 $ git grep USB_DR_MODE_ | wc -l 190 So I'm not sure how easy it will be to condense down, since the usage is coming from different usb subsystems (otg and role switching) and I worry assuming them equivalent in just one driver may run into trouble eventually if the values diverge (ie someone adds USB_ROLE_BRICK or something). Heikki/Greg: Any thoughts on this? Does it make sense to try to drop the usb_role enum and users and replace it with usb_dr_mode? thanks -john
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 6f19e9891767..3c879c9ab1aa 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -953,6 +953,8 @@ struct dwc3_scratchpad_array { * - USBPHY_INTERFACE_MODE_UTMI * - USBPHY_INTERFACE_MODE_UTMIW * @role_sw: usb_role_switch handle + * @role_switch_default_mode: default operation mode of controller while + * usb role is USB_ROLE_NONE. * @usb2_phy: pointer to USB2 PHY * @usb3_phy: pointer to USB3 PHY * @usb2_generic_phy: pointer to USB2 PHY @@ -1087,6 +1089,7 @@ struct dwc3 { struct notifier_block edev_nb; enum usb_phy_interface hsphy_mode; struct usb_role_switch *role_sw; + enum usb_dr_mode role_switch_default_mode; u32 fladj; u32 irq_gadget; diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c index 61d4fd8aead4..0e3466fe5ac4 100644 --- a/drivers/usb/dwc3/drd.c +++ b/drivers/usb/dwc3/drd.c @@ -489,7 +489,10 @@ static int dwc3_usb_role_switch_set(struct device *dev, enum usb_role role) mode = DWC3_GCTL_PRTCAP_DEVICE; break; default: - mode = DWC3_GCTL_PRTCAP_DEVICE; + if (dwc->role_switch_default_mode == USB_DR_MODE_HOST) + mode = DWC3_GCTL_PRTCAP_HOST; + else + mode = DWC3_GCTL_PRTCAP_DEVICE; break; } @@ -515,7 +518,10 @@ static enum usb_role dwc3_usb_role_switch_get(struct device *dev) role = dwc->current_otg_role; break; default: - role = USB_ROLE_DEVICE; + if (dwc->role_switch_default_mode == USB_DR_MODE_HOST) + role = USB_ROLE_HOST; + else + role = USB_ROLE_DEVICE; break; } spin_unlock_irqrestore(&dwc->lock, flags); @@ -534,8 +540,14 @@ int dwc3_drd_init(struct dwc3 *dwc) struct usb_role_switch_desc dwc3_role_switch = {NULL}; u32 mode; - mode = DWC3_GCTL_PRTCAP_DEVICE; - + if (device_property_read_bool(dwc->dev, + "role-switch-default-host")) { + dwc->role_switch_default_mode = USB_DR_MODE_HOST; + mode = DWC3_GCTL_PRTCAP_HOST; + } else { + dwc->role_switch_default_mode = USB_DR_MODE_PERIPHERAL; + mode = DWC3_GCTL_PRTCAP_DEVICE; + } dwc3_role_switch.fwnode = dev_fwnode(dwc->dev); dwc3_role_switch.set = dwc3_usb_role_switch_set; dwc3_role_switch.get = dwc3_usb_role_switch_get;
Support configuring the default role the controller assumes as host mode when the usb role is USB_ROLE_NONE This patch was split out from a larger patch originally by Yu Chen <chenyu56@huawei.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> CC: ShuFan Lee <shufan_lee@richtek.com> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Yu Chen <chenyu56@huawei.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Jun Li <lijun.kernel@gmail.com> Cc: Valentin Schneider <valentin.schneider@arm.com> Cc: Jack Pham <jackp@codeaurora.org> Cc: linux-usb@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: John Stultz <john.stultz@linaro.org> --- v3: Split this patch out from addition of usb-role-switch handling --- drivers/usb/dwc3/core.h | 3 +++ drivers/usb/dwc3/drd.c | 20 ++++++++++++++++---- 2 files changed, 19 insertions(+), 4 deletions(-)