| Message ID | 1573157463-14070-3-git-send-email-fabrizio.castro@bp.renesas.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add LCD panel support to iwg20d | expand |
Hello Laurent, Thank you for your feedback! > From: devicetree-owner@vger.kernel.org <devicetree-owner@vger.kernel.org> On Behalf Of Laurent Pinchart > Sent: 07 November 2019 20:35 > Subject: Re: [PATCH v3 2/7] drm/bridge: Repurpose lvds-encoder.c > > Hi Fabrizio, > > Thank you for the patch. > > On Thu, Nov 07, 2019 at 08:10:58PM +0000, Fabrizio Castro wrote: > > lvds-encoder.c implementation is also suitable for LVDS decoders, > > not just LVDS encoders. > > Instead of creating a new driver for addressing support for > > transparent LVDS decoders, repurpose lvds-encoder.c for the greater > > good. > > > > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > > > > --- > > v2->v3: > > * No change > > v1->v2: > > * No change > > --- > > drivers/gpu/drm/bridge/Kconfig | 8 +- > > drivers/gpu/drm/bridge/Makefile | 2 +- > > drivers/gpu/drm/bridge/lvds-codec.c | 131 ++++++++++++++++++++++++++++ > > drivers/gpu/drm/bridge/lvds-encoder.c | 155 ---------------------------------- > > 4 files changed, 136 insertions(+), 160 deletions(-) > > It would help if you added the -M1 option to git-format-patch to detect > the rename, the result would be easier to review. Will do, thank you for the hint > > > create mode 100644 drivers/gpu/drm/bridge/lvds-codec.c > > delete mode 100644 drivers/gpu/drm/bridge/lvds-encoder.c > > > > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig > > index 3436297..9e75ca4e 100644 > > --- a/drivers/gpu/drm/bridge/Kconfig > > +++ b/drivers/gpu/drm/bridge/Kconfig > > @@ -45,14 +45,14 @@ config DRM_DUMB_VGA_DAC > > Support for non-programmable RGB to VGA DAC bridges, such as ADI > > ADV7123, TI THS8134 and THS8135 or passive resistor ladder DACs. > > > > -config DRM_LVDS_ENCODER > > - tristate "Transparent parallel to LVDS encoder support" > > +config DRM_LVDS_CODEC > > + tristate "Transparent LVDS encoders and decoders support" > > depends on OF > > select DRM_KMS_HELPER > > select DRM_PANEL_BRIDGE > > help > > - Support for transparent parallel to LVDS encoders that don't require > > - any configuration. > > + Support for transparent LVDS encoders and LVDS decoders that don't > > + require any configuration. > > > > config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW > > tristate "MegaChips stdp4028-ge-b850v3-fw and stdp2690-ge-b850v3-fw" > > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile > > index 4934fcf..8a9178a 100644 > > --- a/drivers/gpu/drm/bridge/Makefile > > +++ b/drivers/gpu/drm/bridge/Makefile > > @@ -2,7 +2,7 @@ > > obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o > > obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o > > obj-$(CONFIG_DRM_DUMB_VGA_DAC) += dumb-vga-dac.o > > -obj-$(CONFIG_DRM_LVDS_ENCODER) += lvds-encoder.o > > +obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o > > obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o > > obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o > > obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o > > diff --git a/drivers/gpu/drm/bridge/lvds-codec.c b/drivers/gpu/drm/bridge/lvds-codec.c > > new file mode 100644 > > index 0000000..d57a8eb > > --- /dev/null > > +++ b/drivers/gpu/drm/bridge/lvds-codec.c > > @@ -0,0 +1,131 @@ > > +// SPDX-License-Identifier: GPL-2.0-or-later > > +/* > > + * Copyright (C) 2019 Renesas Electronics Corporation > > + * Copyright (C) 2016 Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > + */ > > + > > +#include <linux/gpio/consumer.h> > > +#include <linux/module.h> > > +#include <linux/of.h> > > +#include <linux/of_device.h> > > +#include <linux/of_graph.h> > > +#include <linux/platform_device.h> > > + > > +#include <drm/drm_bridge.h> > > +#include <drm/drm_panel.h> > > + > > +struct lvds_codec { > > + struct drm_bridge bridge; > > + struct drm_bridge *panel_bridge; > > + struct gpio_desc *powerdown_gpio; > > +}; > > + > > +static int lvds_codec_attach(struct drm_bridge *bridge) > > +{ > > + struct lvds_codec *lvds_codec = container_of(bridge, > > + struct lvds_codec, bridge); > > + > > + return drm_bridge_attach(bridge->encoder, lvds_codec->panel_bridge, > > + bridge); > > +} > > + > > +static void lvds_codec_enable(struct drm_bridge *bridge) > > +{ > > + struct lvds_codec *lvds_codec = container_of(bridge, > > + struct lvds_codec, bridge); > > + > > + if (lvds_codec->powerdown_gpio) > > + gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 0); > > +} > > + > > +static void lvds_codec_disable(struct drm_bridge *bridge) > > +{ > > + struct lvds_codec *lvds_codec = container_of(bridge, > > + struct lvds_codec, bridge); > > + > > + if (lvds_codec->powerdown_gpio) > > + gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 1); > > +} > > + > > +static struct drm_bridge_funcs funcs = { > > + .attach = lvds_codec_attach, > > + .enable = lvds_codec_enable, > > + .disable = lvds_codec_disable, > > +}; > > + > > +static int lvds_codec_probe(struct platform_device *pdev) > > +{ > > + struct device *dev = &pdev->dev; > > + struct device_node *panel_node; > > + struct drm_panel *panel; > > + struct lvds_codec *lvds_codec; > > + > > + lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL); > > + if (!lvds_codec) > > + return -ENOMEM; > > + > > + lvds_codec->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown", > > + GPIOD_OUT_HIGH); > > + if (IS_ERR(lvds_codec->powerdown_gpio)) > > + return PTR_ERR(lvds_codec->powerdown_gpio); > > The driver had an error message here, any reason it got removed ? I am quoting from https://www.spinics.net/lists/devicetree/msg318602.html : "I know it was there already, but this seems a bit unusual for the minimal gain of having a printout in the very unlikely case the gpiod_get() operations fails. I would just return PTR_ERR()." I am OK with reinstating it, just let me know what you want me to do here. > > > + > > + panel_node = of_graph_get_remote_node(dev->of_node, 1, 0); > > + if (!panel_node) { > > + dev_dbg(dev, "panel DT node not found\n"); > > + return -ENXIO; > > + } > > + > > + panel = of_drm_find_panel(panel_node); > > + of_node_put(panel_node); > > + if (IS_ERR(panel)) { > > + dev_dbg(dev, "panel not found, deferring probe\n"); > > + return PTR_ERR(panel); > > + } > > + > > + lvds_codec->panel_bridge = devm_drm_panel_bridge_add(dev, panel); > > This was devm_drm_panel_bridge_add_typed(), do you think there's a risk > of breaking userspace ? Of course as noted in the documentation of > devm_drm_panel_bridge_add_typed() the right solution is to fix panel > drivers, but I'm still slightly worried. Things break when the panel doesn't define connector_type, leading to the below check from devm_drm_panel_bridge_add: if (WARN_ON(panel->connector_type == DRM_MODE_CONNECTOR_Unknown)) return NULL; Please advise on the best course of action here. > > Actually, could you split this patch in two, with a patch that only > renames the driver (and the symbols internally) without any functional > change, and another patch that performs the modifications ? That would > be much easier to review and discuss. Will do > > > + if (IS_ERR(lvds_codec->panel_bridge)) > > + return PTR_ERR(lvds_codec->panel_bridge); > > + > > + /* The panel_bridge bridge is attached to the panel's of_node, > > + * but we need a bridge attached to our of_node for our user > > + * to look up. > > + */ > > + lvds_codec->bridge.of_node = dev->of_node; > > + lvds_codec->bridge.funcs = &funcs; > > + drm_bridge_add(&lvds_codec->bridge); > > + > > + platform_set_drvdata(pdev, lvds_codec); > > + > > + return 0; > > +} > > + > > +static int lvds_codec_remove(struct platform_device *pdev) > > +{ > > + struct lvds_codec *lvds_codec = platform_get_drvdata(pdev); > > + > > + drm_bridge_remove(&lvds_codec->bridge); > > + > > + return 0; > > +} > > + > > +static const struct of_device_id lvds_codec_match[] = { > > + { .compatible = "lvds-encoder" }, > > + { .compatible = "thine,thc63lvdm83d" }, > > + { .compatible = "lvds-decoder" }, > > + {}, > > +}; > > +MODULE_DEVICE_TABLE(of, lvds_codec_match); > > + > > +static struct platform_driver lvds_codec_driver = { > > + .probe = lvds_codec_probe, > > + .remove = lvds_codec_remove, > > + .driver = { > > + .name = "lvds-codec", > > + .of_match_table = lvds_codec_match, > > + }, > > +}; > > +module_platform_driver(lvds_codec_driver); > > + > > +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); > > +MODULE_DESCRIPTION("Driver for transparent LVDS encoders and LVDS decoders"); > > Maybe "LVDS encoders and decoders" ? > > > +MODULE_LICENSE("GPL"); > > [snip] > > -- > Regards, > > Laurent Pinchart
Hello, On Fri, Nov 08, 2019 at 09:22:56AM +0000, Fabrizio Castro wrote: > Hello Laurent, > > Thank you for your feedback! > > > From: devicetree-owner@vger.kernel.org <devicetree-owner@vger.kernel.org> On Behalf Of Laurent Pinchart > > Sent: 07 November 2019 20:35 > > Subject: Re: [PATCH v3 2/7] drm/bridge: Repurpose lvds-encoder.c > > > > Hi Fabrizio, > > > > Thank you for the patch. > > > > On Thu, Nov 07, 2019 at 08:10:58PM +0000, Fabrizio Castro wrote: > > > lvds-encoder.c implementation is also suitable for LVDS decoders, > > > not just LVDS encoders. > > > Instead of creating a new driver for addressing support for > > > transparent LVDS decoders, repurpose lvds-encoder.c for the greater > > > good. > > > > > > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > > > > > > --- > > > v2->v3: > > > * No change > > > v1->v2: > > > * No change > > > --- > > > drivers/gpu/drm/bridge/Kconfig | 8 +- > > > drivers/gpu/drm/bridge/Makefile | 2 +- > > > drivers/gpu/drm/bridge/lvds-codec.c | 131 ++++++++++++++++++++++++++++ > > > drivers/gpu/drm/bridge/lvds-encoder.c | 155 ---------------------------------- > > > 4 files changed, 136 insertions(+), 160 deletions(-) > > > > It would help if you added the -M1 option to git-format-patch to detect > > the rename, the result would be easier to review. > > Will do, thank you for the hint > > > > > > create mode 100644 drivers/gpu/drm/bridge/lvds-codec.c > > > delete mode 100644 drivers/gpu/drm/bridge/lvds-encoder.c > > > > > > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig > > > index 3436297..9e75ca4e 100644 > > > --- a/drivers/gpu/drm/bridge/Kconfig > > > +++ b/drivers/gpu/drm/bridge/Kconfig > > > @@ -45,14 +45,14 @@ config DRM_DUMB_VGA_DAC > > > Support for non-programmable RGB to VGA DAC bridges, such as ADI > > > ADV7123, TI THS8134 and THS8135 or passive resistor ladder DACs. > > > > > > -config DRM_LVDS_ENCODER > > > - tristate "Transparent parallel to LVDS encoder support" > > > +config DRM_LVDS_CODEC > > > + tristate "Transparent LVDS encoders and decoders support" > > > depends on OF > > > select DRM_KMS_HELPER > > > select DRM_PANEL_BRIDGE > > > help > > > - Support for transparent parallel to LVDS encoders that don't require > > > - any configuration. > > > + Support for transparent LVDS encoders and LVDS decoders that don't > > > + require any configuration. > > > > > > config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW > > > tristate "MegaChips stdp4028-ge-b850v3-fw and stdp2690-ge-b850v3-fw" > > > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile > > > index 4934fcf..8a9178a 100644 > > > --- a/drivers/gpu/drm/bridge/Makefile > > > +++ b/drivers/gpu/drm/bridge/Makefile > > > @@ -2,7 +2,7 @@ > > > obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o > > > obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o > > > obj-$(CONFIG_DRM_DUMB_VGA_DAC) += dumb-vga-dac.o > > > -obj-$(CONFIG_DRM_LVDS_ENCODER) += lvds-encoder.o > > > +obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o > > > obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o > > > obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o > > > obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o > > > diff --git a/drivers/gpu/drm/bridge/lvds-codec.c b/drivers/gpu/drm/bridge/lvds-codec.c > > > new file mode 100644 > > > index 0000000..d57a8eb > > > --- /dev/null > > > +++ b/drivers/gpu/drm/bridge/lvds-codec.c > > > @@ -0,0 +1,131 @@ > > > +// SPDX-License-Identifier: GPL-2.0-or-later > > > +/* > > > + * Copyright (C) 2019 Renesas Electronics Corporation > > > + * Copyright (C) 2016 Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > + */ > > > + > > > +#include <linux/gpio/consumer.h> > > > +#include <linux/module.h> > > > +#include <linux/of.h> > > > +#include <linux/of_device.h> > > > +#include <linux/of_graph.h> > > > +#include <linux/platform_device.h> > > > + > > > +#include <drm/drm_bridge.h> > > > +#include <drm/drm_panel.h> > > > + > > > +struct lvds_codec { > > > + struct drm_bridge bridge; > > > + struct drm_bridge *panel_bridge; > > > + struct gpio_desc *powerdown_gpio; > > > +}; > > > + > > > +static int lvds_codec_attach(struct drm_bridge *bridge) > > > +{ > > > + struct lvds_codec *lvds_codec = container_of(bridge, > > > + struct lvds_codec, bridge); > > > + > > > + return drm_bridge_attach(bridge->encoder, lvds_codec->panel_bridge, > > > + bridge); > > > +} > > > + > > > +static void lvds_codec_enable(struct drm_bridge *bridge) > > > +{ > > > + struct lvds_codec *lvds_codec = container_of(bridge, > > > + struct lvds_codec, bridge); > > > + > > > + if (lvds_codec->powerdown_gpio) > > > + gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 0); > > > +} > > > + > > > +static void lvds_codec_disable(struct drm_bridge *bridge) > > > +{ > > > + struct lvds_codec *lvds_codec = container_of(bridge, > > > + struct lvds_codec, bridge); > > > + > > > + if (lvds_codec->powerdown_gpio) > > > + gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 1); > > > +} > > > + > > > +static struct drm_bridge_funcs funcs = { > > > + .attach = lvds_codec_attach, > > > + .enable = lvds_codec_enable, > > > + .disable = lvds_codec_disable, > > > +}; > > > + > > > +static int lvds_codec_probe(struct platform_device *pdev) > > > +{ > > > + struct device *dev = &pdev->dev; > > > + struct device_node *panel_node; > > > + struct drm_panel *panel; > > > + struct lvds_codec *lvds_codec; > > > + > > > + lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL); > > > + if (!lvds_codec) > > > + return -ENOMEM; > > > + > > > + lvds_codec->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown", > > > + GPIOD_OUT_HIGH); > > > + if (IS_ERR(lvds_codec->powerdown_gpio)) > > > + return PTR_ERR(lvds_codec->powerdown_gpio); > > > > The driver had an error message here, any reason it got removed ? > > I am quoting from https://www.spinics.net/lists/devicetree/msg318602.html : > "I know it was there already, but this seems a bit unusual for the > minimal gain of having a printout in the very unlikely case the > gpiod_get() operations fails. I would just return PTR_ERR()." > > I am OK with reinstating it, just let me know what you want me to do here. > Yeah, I suggested that as it seemed to me quite unusual pattern for the minimal gain of having an error message in an unlikely case. Sorry Fab for the double effort if Laurent wants it back again. > > > > > + > > > + panel_node = of_graph_get_remote_node(dev->of_node, 1, 0); > > > + if (!panel_node) { > > > + dev_dbg(dev, "panel DT node not found\n"); > > > + return -ENXIO; > > > + } > > > + > > > + panel = of_drm_find_panel(panel_node); > > > + of_node_put(panel_node); > > > + if (IS_ERR(panel)) { > > > + dev_dbg(dev, "panel not found, deferring probe\n"); > > > + return PTR_ERR(panel); > > > + } > > > + > > > + lvds_codec->panel_bridge = devm_drm_panel_bridge_add(dev, panel); > > > > This was devm_drm_panel_bridge_add_typed(), do you think there's a risk > > of breaking userspace ? Of course as noted in the documentation of > > devm_drm_panel_bridge_add_typed() the right solution is to fix panel > > drivers, but I'm still slightly worried. > > Things break when the panel doesn't define connector_type, leading to the below > check from devm_drm_panel_bridge_add: > if (WARN_ON(panel->connector_type == DRM_MODE_CONNECTOR_Unknown)) > return NULL; > > Please advise on the best course of action here. I pointed out that function was described as deprecated and probably fixing the panel driver would be best. Why are you concerned about userspace ? is the panel driver that should correctly report its connector type, isn't it ? In case it's not, sorry again Fab for the double effort. > > > > > Actually, could you split this patch in two, with a patch that only > > renames the driver (and the symbols internally) without any functional > > change, and another patch that performs the modifications ? That would > > be much easier to review and discuss. This is more work for something that could be simply addressed by the reviewer by passing -M10 to git show. For such a simple driver isn't this fine the way it is ? > > Will do > > > > > > + if (IS_ERR(lvds_codec->panel_bridge)) > > > + return PTR_ERR(lvds_codec->panel_bridge); > > > + > > > + /* The panel_bridge bridge is attached to the panel's of_node, > > > + * but we need a bridge attached to our of_node for our user > > > + * to look up. > > > + */ > > > + lvds_codec->bridge.of_node = dev->of_node; > > > + lvds_codec->bridge.funcs = &funcs; > > > + drm_bridge_add(&lvds_codec->bridge); > > > + > > > + platform_set_drvdata(pdev, lvds_codec); > > > + > > > + return 0; > > > +} > > > + > > > +static int lvds_codec_remove(struct platform_device *pdev) > > > +{ > > > + struct lvds_codec *lvds_codec = platform_get_drvdata(pdev); > > > + > > > + drm_bridge_remove(&lvds_codec->bridge); > > > + > > > + return 0; > > > +} > > > + > > > +static const struct of_device_id lvds_codec_match[] = { > > > + { .compatible = "lvds-encoder" }, > > > + { .compatible = "thine,thc63lvdm83d" }, > > > + { .compatible = "lvds-decoder" }, > > > + {}, > > > +}; > > > +MODULE_DEVICE_TABLE(of, lvds_codec_match); > > > + > > > +static struct platform_driver lvds_codec_driver = { > > > + .probe = lvds_codec_probe, > > > + .remove = lvds_codec_remove, > > > + .driver = { > > > + .name = "lvds-codec", > > > + .of_match_table = lvds_codec_match, > > > + }, > > > +}; > > > +module_platform_driver(lvds_codec_driver); > > > + > > > +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); > > > +MODULE_DESCRIPTION("Driver for transparent LVDS encoders and LVDS decoders"); > > > > Maybe "LVDS encoders and decoders" ? > > > > > +MODULE_LICENSE("GPL"); > > > > [snip] > > > > -- > > Regards, > > > > Laurent Pinchart
Hi Fabrizio, On Fri, Nov 08, 2019 at 09:22:56AM +0000, Fabrizio Castro wrote: > On 07 November 2019 20:35 Laurent Pinchart wrote: > > On Thu, Nov 07, 2019 at 08:10:58PM +0000, Fabrizio Castro wrote: > > > lvds-encoder.c implementation is also suitable for LVDS decoders, > > > not just LVDS encoders. > > > Instead of creating a new driver for addressing support for > > > transparent LVDS decoders, repurpose lvds-encoder.c for the greater > > > good. > > > > > > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > > > > > > --- > > > v2->v3: > > > * No change > > > v1->v2: > > > * No change > > > --- > > > drivers/gpu/drm/bridge/Kconfig | 8 +- > > > drivers/gpu/drm/bridge/Makefile | 2 +- > > > drivers/gpu/drm/bridge/lvds-codec.c | 131 ++++++++++++++++++++++++++++ > > > drivers/gpu/drm/bridge/lvds-encoder.c | 155 ---------------------------------- > > > 4 files changed, 136 insertions(+), 160 deletions(-) > > > > It would help if you added the -M1 option to git-format-patch to detect > > the rename, the result would be easier to review. > > Will do, thank you for the hint > > > > create mode 100644 drivers/gpu/drm/bridge/lvds-codec.c > > > delete mode 100644 drivers/gpu/drm/bridge/lvds-encoder.c > > > > > > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig > > > index 3436297..9e75ca4e 100644 > > > --- a/drivers/gpu/drm/bridge/Kconfig > > > +++ b/drivers/gpu/drm/bridge/Kconfig > > > @@ -45,14 +45,14 @@ config DRM_DUMB_VGA_DAC > > > Support for non-programmable RGB to VGA DAC bridges, such as ADI > > > ADV7123, TI THS8134 and THS8135 or passive resistor ladder DACs. > > > > > > -config DRM_LVDS_ENCODER > > > - tristate "Transparent parallel to LVDS encoder support" > > > +config DRM_LVDS_CODEC > > > + tristate "Transparent LVDS encoders and decoders support" > > > depends on OF > > > select DRM_KMS_HELPER > > > select DRM_PANEL_BRIDGE > > > help > > > - Support for transparent parallel to LVDS encoders that don't require > > > - any configuration. > > > + Support for transparent LVDS encoders and LVDS decoders that don't > > > + require any configuration. > > > > > > config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW > > > tristate "MegaChips stdp4028-ge-b850v3-fw and stdp2690-ge-b850v3-fw" > > > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile > > > index 4934fcf..8a9178a 100644 > > > --- a/drivers/gpu/drm/bridge/Makefile > > > +++ b/drivers/gpu/drm/bridge/Makefile > > > @@ -2,7 +2,7 @@ > > > obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o > > > obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o > > > obj-$(CONFIG_DRM_DUMB_VGA_DAC) += dumb-vga-dac.o > > > -obj-$(CONFIG_DRM_LVDS_ENCODER) += lvds-encoder.o > > > +obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o > > > obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o > > > obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o > > > obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o > > > diff --git a/drivers/gpu/drm/bridge/lvds-codec.c b/drivers/gpu/drm/bridge/lvds-codec.c > > > new file mode 100644 > > > index 0000000..d57a8eb > > > --- /dev/null > > > +++ b/drivers/gpu/drm/bridge/lvds-codec.c > > > @@ -0,0 +1,131 @@ > > > +// SPDX-License-Identifier: GPL-2.0-or-later > > > +/* > > > + * Copyright (C) 2019 Renesas Electronics Corporation > > > + * Copyright (C) 2016 Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > + */ > > > + > > > +#include <linux/gpio/consumer.h> > > > +#include <linux/module.h> > > > +#include <linux/of.h> > > > +#include <linux/of_device.h> > > > +#include <linux/of_graph.h> > > > +#include <linux/platform_device.h> > > > + > > > +#include <drm/drm_bridge.h> > > > +#include <drm/drm_panel.h> > > > + > > > +struct lvds_codec { > > > + struct drm_bridge bridge; > > > + struct drm_bridge *panel_bridge; > > > + struct gpio_desc *powerdown_gpio; > > > +}; > > > + > > > +static int lvds_codec_attach(struct drm_bridge *bridge) > > > +{ > > > + struct lvds_codec *lvds_codec = container_of(bridge, > > > + struct lvds_codec, bridge); > > > + > > > + return drm_bridge_attach(bridge->encoder, lvds_codec->panel_bridge, > > > + bridge); > > > +} > > > + > > > +static void lvds_codec_enable(struct drm_bridge *bridge) > > > +{ > > > + struct lvds_codec *lvds_codec = container_of(bridge, > > > + struct lvds_codec, bridge); > > > + > > > + if (lvds_codec->powerdown_gpio) > > > + gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 0); > > > +} > > > + > > > +static void lvds_codec_disable(struct drm_bridge *bridge) > > > +{ > > > + struct lvds_codec *lvds_codec = container_of(bridge, > > > + struct lvds_codec, bridge); > > > + > > > + if (lvds_codec->powerdown_gpio) > > > + gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 1); > > > +} > > > + > > > +static struct drm_bridge_funcs funcs = { > > > + .attach = lvds_codec_attach, > > > + .enable = lvds_codec_enable, > > > + .disable = lvds_codec_disable, > > > +}; > > > + > > > +static int lvds_codec_probe(struct platform_device *pdev) > > > +{ > > > + struct device *dev = &pdev->dev; > > > + struct device_node *panel_node; > > > + struct drm_panel *panel; > > > + struct lvds_codec *lvds_codec; > > > + > > > + lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL); > > > + if (!lvds_codec) > > > + return -ENOMEM; > > > + > > > + lvds_codec->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown", > > > + GPIOD_OUT_HIGH); > > > + if (IS_ERR(lvds_codec->powerdown_gpio)) > > > + return PTR_ERR(lvds_codec->powerdown_gpio); > > > > The driver had an error message here, any reason it got removed ? > > I am quoting from https://www.spinics.net/lists/devicetree/msg318602.html : > "I know it was there already, but this seems a bit unusual for the > minimal gain of having a printout in the very unlikely case the > gpiod_get() operations fails. I would just return PTR_ERR()." > > I am OK with reinstating it, just let me know what you want me to do here. Debugging probe failures is annoying without proper error messages. As the GPIO is optional, though, it's probably safe to drop it, but if you decide to do so, please split that to a separate patch. What bothers me the most is that the change is hidden and not explained in the commit message. > > > + > > > + panel_node = of_graph_get_remote_node(dev->of_node, 1, 0); > > > + if (!panel_node) { > > > + dev_dbg(dev, "panel DT node not found\n"); > > > + return -ENXIO; > > > + } > > > + > > > + panel = of_drm_find_panel(panel_node); > > > + of_node_put(panel_node); > > > + if (IS_ERR(panel)) { > > > + dev_dbg(dev, "panel not found, deferring probe\n"); > > > + return PTR_ERR(panel); > > > + } > > > + > > > + lvds_codec->panel_bridge = devm_drm_panel_bridge_add(dev, panel); > > > > This was devm_drm_panel_bridge_add_typed(), do you think there's a risk > > of breaking userspace ? Of course as noted in the documentation of > > devm_drm_panel_bridge_add_typed() the right solution is to fix panel > > drivers, but I'm still slightly worried. > > Things break when the panel doesn't define connector_type, leading to the below > check from devm_drm_panel_bridge_add: > if (WARN_ON(panel->connector_type == DRM_MODE_CONNECTOR_Unknown)) > return NULL; > > Please advise on the best course of action here. It's a matter of risk management. Is there a system that uses a buggy panel driver with lvds-encoder out there ? If you think the risk is close to 0, this change is fine. Otherwise we need to keep using devm_drm_panel_bridge_add_typed() for the lvds-encoder case. In any case, please split this to a separate patch. > > Actually, could you split this patch in two, with a patch that only > > renames the driver (and the symbols internally) without any functional > > change, and another patch that performs the modifications ? That would > > be much easier to review and discuss. > > Will do > > > > + if (IS_ERR(lvds_codec->panel_bridge)) > > > + return PTR_ERR(lvds_codec->panel_bridge); > > > + > > > + /* The panel_bridge bridge is attached to the panel's of_node, > > > + * but we need a bridge attached to our of_node for our user > > > + * to look up. > > > + */ > > > + lvds_codec->bridge.of_node = dev->of_node; > > > + lvds_codec->bridge.funcs = &funcs; > > > + drm_bridge_add(&lvds_codec->bridge); > > > + > > > + platform_set_drvdata(pdev, lvds_codec); > > > + > > > + return 0; > > > +} > > > + > > > +static int lvds_codec_remove(struct platform_device *pdev) > > > +{ > > > + struct lvds_codec *lvds_codec = platform_get_drvdata(pdev); > > > + > > > + drm_bridge_remove(&lvds_codec->bridge); > > > + > > > + return 0; > > > +} > > > + > > > +static const struct of_device_id lvds_codec_match[] = { > > > + { .compatible = "lvds-encoder" }, > > > + { .compatible = "thine,thc63lvdm83d" }, > > > + { .compatible = "lvds-decoder" }, > > > + {}, > > > +}; > > > +MODULE_DEVICE_TABLE(of, lvds_codec_match); > > > + > > > +static struct platform_driver lvds_codec_driver = { > > > + .probe = lvds_codec_probe, > > > + .remove = lvds_codec_remove, > > > + .driver = { > > > + .name = "lvds-codec", > > > + .of_match_table = lvds_codec_match, > > > + }, > > > +}; > > > +module_platform_driver(lvds_codec_driver); > > > + > > > +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); > > > +MODULE_DESCRIPTION("Driver for transparent LVDS encoders and LVDS decoders"); > > > > Maybe "LVDS encoders and decoders" ? > > > > > +MODULE_LICENSE("GPL"); > > > > [snip]
Hello Jacopo, On Fri, Nov 08, 2019 at 10:39:27AM +0100, Jacopo Mondi wrote: > On Fri, Nov 08, 2019 at 09:22:56AM +0000, Fabrizio Castro wrote: > > On 07 November 2019 20:35 Laurent Pinchart wrote: > > > On Thu, Nov 07, 2019 at 08:10:58PM +0000, Fabrizio Castro wrote: > > > > lvds-encoder.c implementation is also suitable for LVDS decoders, > > > > not just LVDS encoders. > > > > Instead of creating a new driver for addressing support for > > > > transparent LVDS decoders, repurpose lvds-encoder.c for the greater > > > > good. > > > > > > > > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > > > > > > > > --- > > > > v2->v3: > > > > * No change > > > > v1->v2: > > > > * No change > > > > --- > > > > drivers/gpu/drm/bridge/Kconfig | 8 +- > > > > drivers/gpu/drm/bridge/Makefile | 2 +- > > > > drivers/gpu/drm/bridge/lvds-codec.c | 131 ++++++++++++++++++++++++++++ > > > > drivers/gpu/drm/bridge/lvds-encoder.c | 155 ---------------------------------- > > > > 4 files changed, 136 insertions(+), 160 deletions(-) > > > > > > It would help if you added the -M1 option to git-format-patch to detect > > > the rename, the result would be easier to review. > > > > Will do, thank you for the hint > > > > > > create mode 100644 drivers/gpu/drm/bridge/lvds-codec.c > > > > delete mode 100644 drivers/gpu/drm/bridge/lvds-encoder.c > > > > > > > > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig > > > > index 3436297..9e75ca4e 100644 > > > > --- a/drivers/gpu/drm/bridge/Kconfig > > > > +++ b/drivers/gpu/drm/bridge/Kconfig > > > > @@ -45,14 +45,14 @@ config DRM_DUMB_VGA_DAC > > > > Support for non-programmable RGB to VGA DAC bridges, such as ADI > > > > ADV7123, TI THS8134 and THS8135 or passive resistor ladder DACs. > > > > > > > > -config DRM_LVDS_ENCODER > > > > - tristate "Transparent parallel to LVDS encoder support" > > > > +config DRM_LVDS_CODEC > > > > + tristate "Transparent LVDS encoders and decoders support" > > > > depends on OF > > > > select DRM_KMS_HELPER > > > > select DRM_PANEL_BRIDGE > > > > help > > > > - Support for transparent parallel to LVDS encoders that don't require > > > > - any configuration. > > > > + Support for transparent LVDS encoders and LVDS decoders that don't > > > > + require any configuration. > > > > > > > > config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW > > > > tristate "MegaChips stdp4028-ge-b850v3-fw and stdp2690-ge-b850v3-fw" > > > > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile > > > > index 4934fcf..8a9178a 100644 > > > > --- a/drivers/gpu/drm/bridge/Makefile > > > > +++ b/drivers/gpu/drm/bridge/Makefile > > > > @@ -2,7 +2,7 @@ > > > > obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o > > > > obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o > > > > obj-$(CONFIG_DRM_DUMB_VGA_DAC) += dumb-vga-dac.o > > > > -obj-$(CONFIG_DRM_LVDS_ENCODER) += lvds-encoder.o > > > > +obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o > > > > obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o > > > > obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o > > > > obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o > > > > diff --git a/drivers/gpu/drm/bridge/lvds-codec.c b/drivers/gpu/drm/bridge/lvds-codec.c > > > > new file mode 100644 > > > > index 0000000..d57a8eb > > > > --- /dev/null > > > > +++ b/drivers/gpu/drm/bridge/lvds-codec.c > > > > @@ -0,0 +1,131 @@ > > > > +// SPDX-License-Identifier: GPL-2.0-or-later > > > > +/* > > > > + * Copyright (C) 2019 Renesas Electronics Corporation > > > > + * Copyright (C) 2016 Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > > + */ > > > > + > > > > +#include <linux/gpio/consumer.h> > > > > +#include <linux/module.h> > > > > +#include <linux/of.h> > > > > +#include <linux/of_device.h> > > > > +#include <linux/of_graph.h> > > > > +#include <linux/platform_device.h> > > > > + > > > > +#include <drm/drm_bridge.h> > > > > +#include <drm/drm_panel.h> > > > > + > > > > +struct lvds_codec { > > > > + struct drm_bridge bridge; > > > > + struct drm_bridge *panel_bridge; > > > > + struct gpio_desc *powerdown_gpio; > > > > +}; > > > > + > > > > +static int lvds_codec_attach(struct drm_bridge *bridge) > > > > +{ > > > > + struct lvds_codec *lvds_codec = container_of(bridge, > > > > + struct lvds_codec, bridge); > > > > + > > > > + return drm_bridge_attach(bridge->encoder, lvds_codec->panel_bridge, > > > > + bridge); > > > > +} > > > > + > > > > +static void lvds_codec_enable(struct drm_bridge *bridge) > > > > +{ > > > > + struct lvds_codec *lvds_codec = container_of(bridge, > > > > + struct lvds_codec, bridge); > > > > + > > > > + if (lvds_codec->powerdown_gpio) > > > > + gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 0); > > > > +} > > > > + > > > > +static void lvds_codec_disable(struct drm_bridge *bridge) > > > > +{ > > > > + struct lvds_codec *lvds_codec = container_of(bridge, > > > > + struct lvds_codec, bridge); > > > > + > > > > + if (lvds_codec->powerdown_gpio) > > > > + gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 1); > > > > +} > > > > + > > > > +static struct drm_bridge_funcs funcs = { > > > > + .attach = lvds_codec_attach, > > > > + .enable = lvds_codec_enable, > > > > + .disable = lvds_codec_disable, > > > > +}; > > > > + > > > > +static int lvds_codec_probe(struct platform_device *pdev) > > > > +{ > > > > + struct device *dev = &pdev->dev; > > > > + struct device_node *panel_node; > > > > + struct drm_panel *panel; > > > > + struct lvds_codec *lvds_codec; > > > > + > > > > + lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL); > > > > + if (!lvds_codec) > > > > + return -ENOMEM; > > > > + > > > > + lvds_codec->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown", > > > > + GPIOD_OUT_HIGH); > > > > + if (IS_ERR(lvds_codec->powerdown_gpio)) > > > > + return PTR_ERR(lvds_codec->powerdown_gpio); > > > > > > The driver had an error message here, any reason it got removed ? > > > > I am quoting from https://www.spinics.net/lists/devicetree/msg318602.html : > > "I know it was there already, but this seems a bit unusual for the > > minimal gain of having a printout in the very unlikely case the > > gpiod_get() operations fails. I would just return PTR_ERR()." > > > > I am OK with reinstating it, just let me know what you want me to do here. > > Yeah, I suggested that as it seemed to me quite unusual pattern for the > minimal gain of having an error message in an unlikely case. Sorry Fab > for the double effort if Laurent wants it back again. > > > > > + > > > > + panel_node = of_graph_get_remote_node(dev->of_node, 1, 0); > > > > + if (!panel_node) { > > > > + dev_dbg(dev, "panel DT node not found\n"); > > > > + return -ENXIO; > > > > + } > > > > + > > > > + panel = of_drm_find_panel(panel_node); > > > > + of_node_put(panel_node); > > > > + if (IS_ERR(panel)) { > > > > + dev_dbg(dev, "panel not found, deferring probe\n"); > > > > + return PTR_ERR(panel); > > > > + } > > > > + > > > > + lvds_codec->panel_bridge = devm_drm_panel_bridge_add(dev, panel); > > > > > > This was devm_drm_panel_bridge_add_typed(), do you think there's a risk > > > of breaking userspace ? Of course as noted in the documentation of > > > devm_drm_panel_bridge_add_typed() the right solution is to fix panel > > > drivers, but I'm still slightly worried. > > > > Things break when the panel doesn't define connector_type, leading to the below > > check from devm_drm_panel_bridge_add: > > if (WARN_ON(panel->connector_type == DRM_MODE_CONNECTOR_Unknown)) > > return NULL; > > > > Please advise on the best course of action here. > > I pointed out that function was described as deprecated and probably > fixing the panel driver would be best. Why are you concerned about > userspace ? is the panel driver that should correctly report its > connector type, isn't it ? In case it's not, sorry again Fab for the > double effort. I'm concerned that this change may turn a working system in a non-working system. The issue has to be fixed in panel drivers of course, but switching from devm_drm_panel_bridge_add_typed() to devm_drm_panel_bridge_add() should only be done once all the drivers that are used with lvds-encoder behave properly. > > > Actually, could you split this patch in two, with a patch that only > > > renames the driver (and the symbols internally) without any functional > > > change, and another patch that performs the modifications ? That would > > > be much easier to review and discuss. > > This is more work for something that could be simply addressed by the > reviewer by passing -M10 to git show. For such a simple driver isn't > this fine the way it is ? Don't make it difficult for the reviewer. I've reviewed this patch in my e-mail client, not in git. The patch itself should be generated with -M10, but in any case, such renames should not be bundled with other changes. One logical change by patch is the rule, and we can sometimes bundle a semi-unrelated minor change (such as a typo or indentation fix), but certainly not a potentially dangerous functional change that needs to be carefully reviewed. > > Will do > > > > > > + if (IS_ERR(lvds_codec->panel_bridge)) > > > > + return PTR_ERR(lvds_codec->panel_bridge); > > > > + > > > > + /* The panel_bridge bridge is attached to the panel's of_node, > > > > + * but we need a bridge attached to our of_node for our user > > > > + * to look up. > > > > + */ > > > > + lvds_codec->bridge.of_node = dev->of_node; > > > > + lvds_codec->bridge.funcs = &funcs; > > > > + drm_bridge_add(&lvds_codec->bridge); > > > > + > > > > + platform_set_drvdata(pdev, lvds_codec); > > > > + > > > > + return 0; > > > > +} > > > > + > > > > +static int lvds_codec_remove(struct platform_device *pdev) > > > > +{ > > > > + struct lvds_codec *lvds_codec = platform_get_drvdata(pdev); > > > > + > > > > + drm_bridge_remove(&lvds_codec->bridge); > > > > + > > > > + return 0; > > > > +} > > > > + > > > > +static const struct of_device_id lvds_codec_match[] = { > > > > + { .compatible = "lvds-encoder" }, > > > > + { .compatible = "thine,thc63lvdm83d" }, > > > > + { .compatible = "lvds-decoder" }, > > > > + {}, > > > > +}; > > > > +MODULE_DEVICE_TABLE(of, lvds_codec_match); > > > > + > > > > +static struct platform_driver lvds_codec_driver = { > > > > + .probe = lvds_codec_probe, > > > > + .remove = lvds_codec_remove, > > > > + .driver = { > > > > + .name = "lvds-codec", > > > > + .of_match_table = lvds_codec_match, > > > > + }, > > > > +}; > > > > +module_platform_driver(lvds_codec_driver); > > > > + > > > > +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); > > > > +MODULE_DESCRIPTION("Driver for transparent LVDS encoders and LVDS decoders"); > > > > > > Maybe "LVDS encoders and decoders" ? > > > > > > > +MODULE_LICENSE("GPL"); > > > > > > [snip]
Hi Laurent, On Fri, Nov 08, 2019 at 01:06:58PM +0200, Laurent Pinchart wrote: > Hello Jacopo, > > On Fri, Nov 08, 2019 at 10:39:27AM +0100, Jacopo Mondi wrote: > > On Fri, Nov 08, 2019 at 09:22:56AM +0000, Fabrizio Castro wrote: > > > On 07 November 2019 20:35 Laurent Pinchart wrote: > > > > On Thu, Nov 07, 2019 at 08:10:58PM +0000, Fabrizio Castro wrote: > > > > > lvds-encoder.c implementation is also suitable for LVDS decoders, > > > > > not just LVDS encoders. > > > > > Instead of creating a new driver for addressing support for > > > > > transparent LVDS decoders, repurpose lvds-encoder.c for the greater > > > > > good. > > > > > > > > > > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > > > > > > > > > > --- > > > > > v2->v3: > > > > > * No change > > > > > v1->v2: > > > > > * No change > > > > > --- > > > > > drivers/gpu/drm/bridge/Kconfig | 8 +- > > > > > drivers/gpu/drm/bridge/Makefile | 2 +- > > > > > drivers/gpu/drm/bridge/lvds-codec.c | 131 ++++++++++++++++++++++++++++ > > > > > drivers/gpu/drm/bridge/lvds-encoder.c | 155 ---------------------------------- > > > > > 4 files changed, 136 insertions(+), 160 deletions(-) > > > > > > > > It would help if you added the -M1 option to git-format-patch to detect > > > > the rename, the result would be easier to review. > > > > > > Will do, thank you for the hint > > > > > > > > create mode 100644 drivers/gpu/drm/bridge/lvds-codec.c > > > > > delete mode 100644 drivers/gpu/drm/bridge/lvds-encoder.c > > > > > > > > > > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig > > > > > index 3436297..9e75ca4e 100644 > > > > > --- a/drivers/gpu/drm/bridge/Kconfig > > > > > +++ b/drivers/gpu/drm/bridge/Kconfig > > > > > @@ -45,14 +45,14 @@ config DRM_DUMB_VGA_DAC > > > > > Support for non-programmable RGB to VGA DAC bridges, such as ADI > > > > > ADV7123, TI THS8134 and THS8135 or passive resistor ladder DACs. > > > > > > > > > > -config DRM_LVDS_ENCODER > > > > > - tristate "Transparent parallel to LVDS encoder support" > > > > > +config DRM_LVDS_CODEC > > > > > + tristate "Transparent LVDS encoders and decoders support" > > > > > depends on OF > > > > > select DRM_KMS_HELPER > > > > > select DRM_PANEL_BRIDGE > > > > > help > > > > > - Support for transparent parallel to LVDS encoders that don't require > > > > > - any configuration. > > > > > + Support for transparent LVDS encoders and LVDS decoders that don't > > > > > + require any configuration. > > > > > > > > > > config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW > > > > > tristate "MegaChips stdp4028-ge-b850v3-fw and stdp2690-ge-b850v3-fw" > > > > > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile > > > > > index 4934fcf..8a9178a 100644 > > > > > --- a/drivers/gpu/drm/bridge/Makefile > > > > > +++ b/drivers/gpu/drm/bridge/Makefile > > > > > @@ -2,7 +2,7 @@ > > > > > obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o > > > > > obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o > > > > > obj-$(CONFIG_DRM_DUMB_VGA_DAC) += dumb-vga-dac.o > > > > > -obj-$(CONFIG_DRM_LVDS_ENCODER) += lvds-encoder.o > > > > > +obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o > > > > > obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o > > > > > obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o > > > > > obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o > > > > > diff --git a/drivers/gpu/drm/bridge/lvds-codec.c b/drivers/gpu/drm/bridge/lvds-codec.c > > > > > new file mode 100644 > > > > > index 0000000..d57a8eb > > > > > --- /dev/null > > > > > +++ b/drivers/gpu/drm/bridge/lvds-codec.c > > > > > @@ -0,0 +1,131 @@ > > > > > +// SPDX-License-Identifier: GPL-2.0-or-later > > > > > +/* > > > > > + * Copyright (C) 2019 Renesas Electronics Corporation > > > > > + * Copyright (C) 2016 Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > > > + */ > > > > > + > > > > > +#include <linux/gpio/consumer.h> > > > > > +#include <linux/module.h> > > > > > +#include <linux/of.h> > > > > > +#include <linux/of_device.h> > > > > > +#include <linux/of_graph.h> > > > > > +#include <linux/platform_device.h> > > > > > + > > > > > +#include <drm/drm_bridge.h> > > > > > +#include <drm/drm_panel.h> > > > > > + > > > > > +struct lvds_codec { > > > > > + struct drm_bridge bridge; > > > > > + struct drm_bridge *panel_bridge; > > > > > + struct gpio_desc *powerdown_gpio; > > > > > +}; > > > > > + > > > > > +static int lvds_codec_attach(struct drm_bridge *bridge) > > > > > +{ > > > > > + struct lvds_codec *lvds_codec = container_of(bridge, > > > > > + struct lvds_codec, bridge); > > > > > + > > > > > + return drm_bridge_attach(bridge->encoder, lvds_codec->panel_bridge, > > > > > + bridge); > > > > > +} > > > > > + > > > > > +static void lvds_codec_enable(struct drm_bridge *bridge) > > > > > +{ > > > > > + struct lvds_codec *lvds_codec = container_of(bridge, > > > > > + struct lvds_codec, bridge); > > > > > + > > > > > + if (lvds_codec->powerdown_gpio) > > > > > + gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 0); > > > > > +} > > > > > + > > > > > +static void lvds_codec_disable(struct drm_bridge *bridge) > > > > > +{ > > > > > + struct lvds_codec *lvds_codec = container_of(bridge, > > > > > + struct lvds_codec, bridge); > > > > > + > > > > > + if (lvds_codec->powerdown_gpio) > > > > > + gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 1); > > > > > +} > > > > > + > > > > > +static struct drm_bridge_funcs funcs = { > > > > > + .attach = lvds_codec_attach, > > > > > + .enable = lvds_codec_enable, > > > > > + .disable = lvds_codec_disable, > > > > > +}; > > > > > + > > > > > +static int lvds_codec_probe(struct platform_device *pdev) > > > > > +{ > > > > > + struct device *dev = &pdev->dev; > > > > > + struct device_node *panel_node; > > > > > + struct drm_panel *panel; > > > > > + struct lvds_codec *lvds_codec; > > > > > + > > > > > + lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL); > > > > > + if (!lvds_codec) > > > > > + return -ENOMEM; > > > > > + > > > > > + lvds_codec->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown", > > > > > + GPIOD_OUT_HIGH); > > > > > + if (IS_ERR(lvds_codec->powerdown_gpio)) > > > > > + return PTR_ERR(lvds_codec->powerdown_gpio); > > > > > > > > The driver had an error message here, any reason it got removed ? > > > > > > I am quoting from https://www.spinics.net/lists/devicetree/msg318602.html : > > > "I know it was there already, but this seems a bit unusual for the > > > minimal gain of having a printout in the very unlikely case the > > > gpiod_get() operations fails. I would just return PTR_ERR()." > > > > > > I am OK with reinstating it, just let me know what you want me to do here. > > > > Yeah, I suggested that as it seemed to me quite unusual pattern for the > > minimal gain of having an error message in an unlikely case. Sorry Fab > > for the double effort if Laurent wants it back again. > > > > > > > + > > > > > + panel_node = of_graph_get_remote_node(dev->of_node, 1, 0); > > > > > + if (!panel_node) { > > > > > + dev_dbg(dev, "panel DT node not found\n"); > > > > > + return -ENXIO; > > > > > + } > > > > > + > > > > > + panel = of_drm_find_panel(panel_node); > > > > > + of_node_put(panel_node); > > > > > + if (IS_ERR(panel)) { > > > > > + dev_dbg(dev, "panel not found, deferring probe\n"); > > > > > + return PTR_ERR(panel); > > > > > + } > > > > > + > > > > > + lvds_codec->panel_bridge = devm_drm_panel_bridge_add(dev, panel); > > > > > > > > This was devm_drm_panel_bridge_add_typed(), do you think there's a risk > > > > of breaking userspace ? Of course as noted in the documentation of > > > > devm_drm_panel_bridge_add_typed() the right solution is to fix panel > > > > drivers, but I'm still slightly worried. > > > > > > Things break when the panel doesn't define connector_type, leading to the below > > > check from devm_drm_panel_bridge_add: > > > if (WARN_ON(panel->connector_type == DRM_MODE_CONNECTOR_Unknown)) > > > return NULL; > > > > > > Please advise on the best course of action here. > > > > I pointed out that function was described as deprecated and probably > > fixing the panel driver would be best. Why are you concerned about > > userspace ? is the panel driver that should correctly report its > > connector type, isn't it ? In case it's not, sorry again Fab for the > > double effort. > > I'm concerned that this change may turn a working system in a > non-working system. The issue has to be fixed in panel drivers of > course, but switching from devm_drm_panel_bridge_add_typed() to > devm_drm_panel_bridge_add() should only be done once all the drivers > that are used with lvds-encoder behave properly. > I see.. It's probably most safer then to keep the _typed() version. However, I understand not breaking working system is of course desirable, but this would not be a userspace breakage, but a driver change that requires other associated drivers to be updated accordingly, like it happens at every release. I however fear a change like this if blindly ported to a BSP would break it, and yes, doing that in this single commit won't help identifying where the issue comes from. Sorry Fabrizio for the bad suggestion, you should keep the _typed version and eventually switch to the new one in a separate commit if you feel like to. > > > > Actually, could you split this patch in two, with a patch that only > > > > renames the driver (and the symbols internally) without any functional > > > > change, and another patch that performs the modifications ? That would > > > > be much easier to review and discuss. > > > > This is more work for something that could be simply addressed by the > > reviewer by passing -M10 to git show. For such a simple driver isn't > > this fine the way it is ? > > Don't make it difficult for the reviewer. I've reviewed this patch in my > e-mail client, not in git. The patch itself should be generated with > -M10, but in any case, such renames should not be bundled with other > changes. One logical change by patch is the rule, and we can sometimes > bundle a semi-unrelated minor change (such as a typo or indentation > fix), but certainly not a potentially dangerous functional change that > needs to be carefully reviewed. Ack Thanks j > > > > Will do > > > > > > > > + if (IS_ERR(lvds_codec->panel_bridge)) > > > > > + return PTR_ERR(lvds_codec->panel_bridge); > > > > > + > > > > > + /* The panel_bridge bridge is attached to the panel's of_node, > > > > > + * but we need a bridge attached to our of_node for our user > > > > > + * to look up. > > > > > + */ > > > > > + lvds_codec->bridge.of_node = dev->of_node; > > > > > + lvds_codec->bridge.funcs = &funcs; > > > > > + drm_bridge_add(&lvds_codec->bridge); > > > > > + > > > > > + platform_set_drvdata(pdev, lvds_codec); > > > > > + > > > > > + return 0; > > > > > +} > > > > > + > > > > > +static int lvds_codec_remove(struct platform_device *pdev) > > > > > +{ > > > > > + struct lvds_codec *lvds_codec = platform_get_drvdata(pdev); > > > > > + > > > > > + drm_bridge_remove(&lvds_codec->bridge); > > > > > + > > > > > + return 0; > > > > > +} > > > > > + > > > > > +static const struct of_device_id lvds_codec_match[] = { > > > > > + { .compatible = "lvds-encoder" }, > > > > > + { .compatible = "thine,thc63lvdm83d" }, > > > > > + { .compatible = "lvds-decoder" }, > > > > > + {}, > > > > > +}; > > > > > +MODULE_DEVICE_TABLE(of, lvds_codec_match); > > > > > + > > > > > +static struct platform_driver lvds_codec_driver = { > > > > > + .probe = lvds_codec_probe, > > > > > + .remove = lvds_codec_remove, > > > > > + .driver = { > > > > > + .name = "lvds-codec", > > > > > + .of_match_table = lvds_codec_match, > > > > > + }, > > > > > +}; > > > > > +module_platform_driver(lvds_codec_driver); > > > > > + > > > > > +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); > > > > > +MODULE_DESCRIPTION("Driver for transparent LVDS encoders and LVDS decoders"); > > > > > > > > Maybe "LVDS encoders and decoders" ? > > > > > > > > > +MODULE_LICENSE("GPL"); > > > > > > > > [snip] > > -- > Regards, > > Laurent Pinchart
Hi Jacopo, On Fri, Nov 08, 2019 at 12:37:37PM +0100, Jacopo Mondi wrote: > On Fri, Nov 08, 2019 at 01:06:58PM +0200, Laurent Pinchart wrote: > > On Fri, Nov 08, 2019 at 10:39:27AM +0100, Jacopo Mondi wrote: > > > On Fri, Nov 08, 2019 at 09:22:56AM +0000, Fabrizio Castro wrote: > > > > On 07 November 2019 20:35 Laurent Pinchart wrote: > > > > > On Thu, Nov 07, 2019 at 08:10:58PM +0000, Fabrizio Castro wrote: > > > > > > lvds-encoder.c implementation is also suitable for LVDS decoders, > > > > > > not just LVDS encoders. > > > > > > Instead of creating a new driver for addressing support for > > > > > > transparent LVDS decoders, repurpose lvds-encoder.c for the greater > > > > > > good. > > > > > > > > > > > > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > > > > > > > > > > > > --- > > > > > > v2->v3: > > > > > > * No change > > > > > > v1->v2: > > > > > > * No change > > > > > > --- > > > > > > drivers/gpu/drm/bridge/Kconfig | 8 +- > > > > > > drivers/gpu/drm/bridge/Makefile | 2 +- > > > > > > drivers/gpu/drm/bridge/lvds-codec.c | 131 ++++++++++++++++++++++++++++ > > > > > > drivers/gpu/drm/bridge/lvds-encoder.c | 155 ---------------------------------- > > > > > > 4 files changed, 136 insertions(+), 160 deletions(-) > > > > > > > > > > It would help if you added the -M1 option to git-format-patch to detect > > > > > the rename, the result would be easier to review. > > > > > > > > Will do, thank you for the hint > > > > > > > > > > create mode 100644 drivers/gpu/drm/bridge/lvds-codec.c > > > > > > delete mode 100644 drivers/gpu/drm/bridge/lvds-encoder.c > > > > > > > > > > > > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig > > > > > > index 3436297..9e75ca4e 100644 > > > > > > --- a/drivers/gpu/drm/bridge/Kconfig > > > > > > +++ b/drivers/gpu/drm/bridge/Kconfig > > > > > > @@ -45,14 +45,14 @@ config DRM_DUMB_VGA_DAC > > > > > > Support for non-programmable RGB to VGA DAC bridges, such as ADI > > > > > > ADV7123, TI THS8134 and THS8135 or passive resistor ladder DACs. > > > > > > > > > > > > -config DRM_LVDS_ENCODER > > > > > > - tristate "Transparent parallel to LVDS encoder support" > > > > > > +config DRM_LVDS_CODEC > > > > > > + tristate "Transparent LVDS encoders and decoders support" > > > > > > depends on OF > > > > > > select DRM_KMS_HELPER > > > > > > select DRM_PANEL_BRIDGE > > > > > > help > > > > > > - Support for transparent parallel to LVDS encoders that don't require > > > > > > - any configuration. > > > > > > + Support for transparent LVDS encoders and LVDS decoders that don't > > > > > > + require any configuration. > > > > > > > > > > > > config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW > > > > > > tristate "MegaChips stdp4028-ge-b850v3-fw and stdp2690-ge-b850v3-fw" > > > > > > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile > > > > > > index 4934fcf..8a9178a 100644 > > > > > > --- a/drivers/gpu/drm/bridge/Makefile > > > > > > +++ b/drivers/gpu/drm/bridge/Makefile > > > > > > @@ -2,7 +2,7 @@ > > > > > > obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o > > > > > > obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o > > > > > > obj-$(CONFIG_DRM_DUMB_VGA_DAC) += dumb-vga-dac.o > > > > > > -obj-$(CONFIG_DRM_LVDS_ENCODER) += lvds-encoder.o > > > > > > +obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o > > > > > > obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o > > > > > > obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o > > > > > > obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o > > > > > > diff --git a/drivers/gpu/drm/bridge/lvds-codec.c b/drivers/gpu/drm/bridge/lvds-codec.c > > > > > > new file mode 100644 > > > > > > index 0000000..d57a8eb > > > > > > --- /dev/null > > > > > > +++ b/drivers/gpu/drm/bridge/lvds-codec.c > > > > > > @@ -0,0 +1,131 @@ > > > > > > +// SPDX-License-Identifier: GPL-2.0-or-later > > > > > > +/* > > > > > > + * Copyright (C) 2019 Renesas Electronics Corporation > > > > > > + * Copyright (C) 2016 Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > > > > + */ > > > > > > + > > > > > > +#include <linux/gpio/consumer.h> > > > > > > +#include <linux/module.h> > > > > > > +#include <linux/of.h> > > > > > > +#include <linux/of_device.h> > > > > > > +#include <linux/of_graph.h> > > > > > > +#include <linux/platform_device.h> > > > > > > + > > > > > > +#include <drm/drm_bridge.h> > > > > > > +#include <drm/drm_panel.h> > > > > > > + > > > > > > +struct lvds_codec { > > > > > > + struct drm_bridge bridge; > > > > > > + struct drm_bridge *panel_bridge; > > > > > > + struct gpio_desc *powerdown_gpio; > > > > > > +}; > > > > > > + > > > > > > +static int lvds_codec_attach(struct drm_bridge *bridge) > > > > > > +{ > > > > > > + struct lvds_codec *lvds_codec = container_of(bridge, > > > > > > + struct lvds_codec, bridge); > > > > > > + > > > > > > + return drm_bridge_attach(bridge->encoder, lvds_codec->panel_bridge, > > > > > > + bridge); > > > > > > +} > > > > > > + > > > > > > +static void lvds_codec_enable(struct drm_bridge *bridge) > > > > > > +{ > > > > > > + struct lvds_codec *lvds_codec = container_of(bridge, > > > > > > + struct lvds_codec, bridge); > > > > > > + > > > > > > + if (lvds_codec->powerdown_gpio) > > > > > > + gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 0); > > > > > > +} > > > > > > + > > > > > > +static void lvds_codec_disable(struct drm_bridge *bridge) > > > > > > +{ > > > > > > + struct lvds_codec *lvds_codec = container_of(bridge, > > > > > > + struct lvds_codec, bridge); > > > > > > + > > > > > > + if (lvds_codec->powerdown_gpio) > > > > > > + gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 1); > > > > > > +} > > > > > > + > > > > > > +static struct drm_bridge_funcs funcs = { > > > > > > + .attach = lvds_codec_attach, > > > > > > + .enable = lvds_codec_enable, > > > > > > + .disable = lvds_codec_disable, > > > > > > +}; > > > > > > + > > > > > > +static int lvds_codec_probe(struct platform_device *pdev) > > > > > > +{ > > > > > > + struct device *dev = &pdev->dev; > > > > > > + struct device_node *panel_node; > > > > > > + struct drm_panel *panel; > > > > > > + struct lvds_codec *lvds_codec; > > > > > > + > > > > > > + lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL); > > > > > > + if (!lvds_codec) > > > > > > + return -ENOMEM; > > > > > > + > > > > > > + lvds_codec->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown", > > > > > > + GPIOD_OUT_HIGH); > > > > > > + if (IS_ERR(lvds_codec->powerdown_gpio)) > > > > > > + return PTR_ERR(lvds_codec->powerdown_gpio); > > > > > > > > > > The driver had an error message here, any reason it got removed ? > > > > > > > > I am quoting from https://www.spinics.net/lists/devicetree/msg318602.html : > > > > "I know it was there already, but this seems a bit unusual for the > > > > minimal gain of having a printout in the very unlikely case the > > > > gpiod_get() operations fails. I would just return PTR_ERR()." > > > > > > > > I am OK with reinstating it, just let me know what you want me to do here. > > > > > > Yeah, I suggested that as it seemed to me quite unusual pattern for the > > > minimal gain of having an error message in an unlikely case. Sorry Fab > > > for the double effort if Laurent wants it back again. > > > > > > > > > + > > > > > > + panel_node = of_graph_get_remote_node(dev->of_node, 1, 0); > > > > > > + if (!panel_node) { > > > > > > + dev_dbg(dev, "panel DT node not found\n"); > > > > > > + return -ENXIO; > > > > > > + } > > > > > > + > > > > > > + panel = of_drm_find_panel(panel_node); > > > > > > + of_node_put(panel_node); > > > > > > + if (IS_ERR(panel)) { > > > > > > + dev_dbg(dev, "panel not found, deferring probe\n"); > > > > > > + return PTR_ERR(panel); > > > > > > + } > > > > > > + > > > > > > + lvds_codec->panel_bridge = devm_drm_panel_bridge_add(dev, panel); > > > > > > > > > > This was devm_drm_panel_bridge_add_typed(), do you think there's a risk > > > > > of breaking userspace ? Of course as noted in the documentation of > > > > > devm_drm_panel_bridge_add_typed() the right solution is to fix panel > > > > > drivers, but I'm still slightly worried. > > > > > > > > Things break when the panel doesn't define connector_type, leading to the below > > > > check from devm_drm_panel_bridge_add: > > > > if (WARN_ON(panel->connector_type == DRM_MODE_CONNECTOR_Unknown)) > > > > return NULL; > > > > > > > > Please advise on the best course of action here. > > > > > > I pointed out that function was described as deprecated and probably > > > fixing the panel driver would be best. Why are you concerned about > > > userspace ? is the panel driver that should correctly report its > > > connector type, isn't it ? In case it's not, sorry again Fab for the > > > double effort. > > > > I'm concerned that this change may turn a working system in a > > non-working system. The issue has to be fixed in panel drivers of > > course, but switching from devm_drm_panel_bridge_add_typed() to > > devm_drm_panel_bridge_add() should only be done once all the drivers > > that are used with lvds-encoder behave properly. > > > > I see.. It's probably most safer then to keep the _typed() version. > > However, I understand not breaking working system is of course > desirable, but this would not be a userspace breakage, but a driver > change that requires other associated drivers to be updated > accordingly, like it happens at every release. Sure, but we're then expected to do this in lock-step, not push the first change, wait for someone to complain, and then fix other drivers :-) If we're confident that panel drivers are already behaving properly (which, in this case, more or less means that all LVDS panel drivers should report that they are LVDS panel drivers), then we can already move forward, but in any case, in a separate patch. > I however fear a > change like this if blindly ported to a BSP would break it, and yes, > doing that in this single commit won't help identifying where the > issue comes from. Sorry Fabrizio for the bad suggestion, you should > keep the _typed version and eventually switch to the new one in a > separate commit if you feel like to. > > > > > > Actually, could you split this patch in two, with a patch that only > > > > > renames the driver (and the symbols internally) without any functional > > > > > change, and another patch that performs the modifications ? That would > > > > > be much easier to review and discuss. > > > > > > This is more work for something that could be simply addressed by the > > > reviewer by passing -M10 to git show. For such a simple driver isn't > > > this fine the way it is ? > > > > Don't make it difficult for the reviewer. I've reviewed this patch in my > > e-mail client, not in git. The patch itself should be generated with > > -M10, but in any case, such renames should not be bundled with other > > changes. One logical change by patch is the rule, and we can sometimes > > bundle a semi-unrelated minor change (such as a typo or indentation > > fix), but certainly not a potentially dangerous functional change that > > needs to be carefully reviewed. > > Ack > > > > > Will do > > > > > > > > > > + if (IS_ERR(lvds_codec->panel_bridge)) > > > > > > + return PTR_ERR(lvds_codec->panel_bridge); > > > > > > + > > > > > > + /* The panel_bridge bridge is attached to the panel's of_node, > > > > > > + * but we need a bridge attached to our of_node for our user > > > > > > + * to look up. > > > > > > + */ > > > > > > + lvds_codec->bridge.of_node = dev->of_node; > > > > > > + lvds_codec->bridge.funcs = &funcs; > > > > > > + drm_bridge_add(&lvds_codec->bridge); > > > > > > + > > > > > > + platform_set_drvdata(pdev, lvds_codec); > > > > > > + > > > > > > + return 0; > > > > > > +} > > > > > > + > > > > > > +static int lvds_codec_remove(struct platform_device *pdev) > > > > > > +{ > > > > > > + struct lvds_codec *lvds_codec = platform_get_drvdata(pdev); > > > > > > + > > > > > > + drm_bridge_remove(&lvds_codec->bridge); > > > > > > + > > > > > > + return 0; > > > > > > +} > > > > > > + > > > > > > +static const struct of_device_id lvds_codec_match[] = { > > > > > > + { .compatible = "lvds-encoder" }, > > > > > > + { .compatible = "thine,thc63lvdm83d" }, > > > > > > + { .compatible = "lvds-decoder" }, > > > > > > + {}, > > > > > > +}; > > > > > > +MODULE_DEVICE_TABLE(of, lvds_codec_match); > > > > > > + > > > > > > +static struct platform_driver lvds_codec_driver = { > > > > > > + .probe = lvds_codec_probe, > > > > > > + .remove = lvds_codec_remove, > > > > > > + .driver = { > > > > > > + .name = "lvds-codec", > > > > > > + .of_match_table = lvds_codec_match, > > > > > > + }, > > > > > > +}; > > > > > > +module_platform_driver(lvds_codec_driver); > > > > > > + > > > > > > +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); > > > > > > +MODULE_DESCRIPTION("Driver for transparent LVDS encoders and LVDS decoders"); > > > > > > > > > > Maybe "LVDS encoders and decoders" ? > > > > > > > > > > > +MODULE_LICENSE("GPL"); > > > > > > > > > > [snip]
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 3436297..9e75ca4e 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -45,14 +45,14 @@ config DRM_DUMB_VGA_DAC Support for non-programmable RGB to VGA DAC bridges, such as ADI ADV7123, TI THS8134 and THS8135 or passive resistor ladder DACs. -config DRM_LVDS_ENCODER - tristate "Transparent parallel to LVDS encoder support" +config DRM_LVDS_CODEC + tristate "Transparent LVDS encoders and decoders support" depends on OF select DRM_KMS_HELPER select DRM_PANEL_BRIDGE help - Support for transparent parallel to LVDS encoders that don't require - any configuration. + Support for transparent LVDS encoders and LVDS decoders that don't + require any configuration. config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW tristate "MegaChips stdp4028-ge-b850v3-fw and stdp2690-ge-b850v3-fw" diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index 4934fcf..8a9178a 100644 --- a/drivers/gpu/drm/bridge/Makefile +++ b/drivers/gpu/drm/bridge/Makefile @@ -2,7 +2,7 @@ obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o obj-$(CONFIG_DRM_DUMB_VGA_DAC) += dumb-vga-dac.o -obj-$(CONFIG_DRM_LVDS_ENCODER) += lvds-encoder.o +obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o diff --git a/drivers/gpu/drm/bridge/lvds-codec.c b/drivers/gpu/drm/bridge/lvds-codec.c new file mode 100644 index 0000000..d57a8eb --- /dev/null +++ b/drivers/gpu/drm/bridge/lvds-codec.c @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2019 Renesas Electronics Corporation + * Copyright (C) 2016 Laurent Pinchart <laurent.pinchart@ideasonboard.com> + */ + +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_graph.h> +#include <linux/platform_device.h> + +#include <drm/drm_bridge.h> +#include <drm/drm_panel.h> + +struct lvds_codec { + struct drm_bridge bridge; + struct drm_bridge *panel_bridge; + struct gpio_desc *powerdown_gpio; +}; + +static int lvds_codec_attach(struct drm_bridge *bridge) +{ + struct lvds_codec *lvds_codec = container_of(bridge, + struct lvds_codec, bridge); + + return drm_bridge_attach(bridge->encoder, lvds_codec->panel_bridge, + bridge); +} + +static void lvds_codec_enable(struct drm_bridge *bridge) +{ + struct lvds_codec *lvds_codec = container_of(bridge, + struct lvds_codec, bridge); + + if (lvds_codec->powerdown_gpio) + gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 0); +} + +static void lvds_codec_disable(struct drm_bridge *bridge) +{ + struct lvds_codec *lvds_codec = container_of(bridge, + struct lvds_codec, bridge); + + if (lvds_codec->powerdown_gpio) + gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 1); +} + +static struct drm_bridge_funcs funcs = { + .attach = lvds_codec_attach, + .enable = lvds_codec_enable, + .disable = lvds_codec_disable, +}; + +static int lvds_codec_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *panel_node; + struct drm_panel *panel; + struct lvds_codec *lvds_codec; + + lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL); + if (!lvds_codec) + return -ENOMEM; + + lvds_codec->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown", + GPIOD_OUT_HIGH); + if (IS_ERR(lvds_codec->powerdown_gpio)) + return PTR_ERR(lvds_codec->powerdown_gpio); + + panel_node = of_graph_get_remote_node(dev->of_node, 1, 0); + if (!panel_node) { + dev_dbg(dev, "panel DT node not found\n"); + return -ENXIO; + } + + panel = of_drm_find_panel(panel_node); + of_node_put(panel_node); + if (IS_ERR(panel)) { + dev_dbg(dev, "panel not found, deferring probe\n"); + return PTR_ERR(panel); + } + + lvds_codec->panel_bridge = devm_drm_panel_bridge_add(dev, panel); + if (IS_ERR(lvds_codec->panel_bridge)) + return PTR_ERR(lvds_codec->panel_bridge); + + /* The panel_bridge bridge is attached to the panel's of_node, + * but we need a bridge attached to our of_node for our user + * to look up. + */ + lvds_codec->bridge.of_node = dev->of_node; + lvds_codec->bridge.funcs = &funcs; + drm_bridge_add(&lvds_codec->bridge); + + platform_set_drvdata(pdev, lvds_codec); + + return 0; +} + +static int lvds_codec_remove(struct platform_device *pdev) +{ + struct lvds_codec *lvds_codec = platform_get_drvdata(pdev); + + drm_bridge_remove(&lvds_codec->bridge); + + return 0; +} + +static const struct of_device_id lvds_codec_match[] = { + { .compatible = "lvds-encoder" }, + { .compatible = "thine,thc63lvdm83d" }, + { .compatible = "lvds-decoder" }, + {}, +}; +MODULE_DEVICE_TABLE(of, lvds_codec_match); + +static struct platform_driver lvds_codec_driver = { + .probe = lvds_codec_probe, + .remove = lvds_codec_remove, + .driver = { + .name = "lvds-codec", + .of_match_table = lvds_codec_match, + }, +}; +module_platform_driver(lvds_codec_driver); + +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); +MODULE_DESCRIPTION("Driver for transparent LVDS encoders and LVDS decoders"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/bridge/lvds-encoder.c b/drivers/gpu/drm/bridge/lvds-encoder.c deleted file mode 100644 index e2132a8..0000000 --- a/drivers/gpu/drm/bridge/lvds-encoder.c +++ /dev/null @@ -1,155 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2016 Laurent Pinchart <laurent.pinchart@ideasonboard.com> - */ - -#include <linux/gpio/consumer.h> -#include <linux/module.h> -#include <linux/of.h> -#include <linux/of_graph.h> -#include <linux/platform_device.h> - -#include <drm/drm_bridge.h> -#include <drm/drm_panel.h> - -struct lvds_encoder { - struct drm_bridge bridge; - struct drm_bridge *panel_bridge; - struct gpio_desc *powerdown_gpio; -}; - -static int lvds_encoder_attach(struct drm_bridge *bridge) -{ - struct lvds_encoder *lvds_encoder = container_of(bridge, - struct lvds_encoder, - bridge); - - return drm_bridge_attach(bridge->encoder, lvds_encoder->panel_bridge, - bridge); -} - -static void lvds_encoder_enable(struct drm_bridge *bridge) -{ - struct lvds_encoder *lvds_encoder = container_of(bridge, - struct lvds_encoder, - bridge); - - if (lvds_encoder->powerdown_gpio) - gpiod_set_value_cansleep(lvds_encoder->powerdown_gpio, 0); -} - -static void lvds_encoder_disable(struct drm_bridge *bridge) -{ - struct lvds_encoder *lvds_encoder = container_of(bridge, - struct lvds_encoder, - bridge); - - if (lvds_encoder->powerdown_gpio) - gpiod_set_value_cansleep(lvds_encoder->powerdown_gpio, 1); -} - -static struct drm_bridge_funcs funcs = { - .attach = lvds_encoder_attach, - .enable = lvds_encoder_enable, - .disable = lvds_encoder_disable, -}; - -static int lvds_encoder_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct device_node *port; - struct device_node *endpoint; - struct device_node *panel_node; - struct drm_panel *panel; - struct lvds_encoder *lvds_encoder; - - lvds_encoder = devm_kzalloc(dev, sizeof(*lvds_encoder), GFP_KERNEL); - if (!lvds_encoder) - return -ENOMEM; - - lvds_encoder->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown", - GPIOD_OUT_HIGH); - if (IS_ERR(lvds_encoder->powerdown_gpio)) { - int err = PTR_ERR(lvds_encoder->powerdown_gpio); - - if (err != -EPROBE_DEFER) - dev_err(dev, "powerdown GPIO failure: %d\n", err); - return err; - } - - /* Locate the panel DT node. */ - port = of_graph_get_port_by_id(dev->of_node, 1); - if (!port) { - dev_dbg(dev, "port 1 not found\n"); - return -ENXIO; - } - - endpoint = of_get_child_by_name(port, "endpoint"); - of_node_put(port); - if (!endpoint) { - dev_dbg(dev, "no endpoint for port 1\n"); - return -ENXIO; - } - - panel_node = of_graph_get_remote_port_parent(endpoint); - of_node_put(endpoint); - if (!panel_node) { - dev_dbg(dev, "no remote endpoint for port 1\n"); - return -ENXIO; - } - - panel = of_drm_find_panel(panel_node); - of_node_put(panel_node); - if (IS_ERR(panel)) { - dev_dbg(dev, "panel not found, deferring probe\n"); - return PTR_ERR(panel); - } - - lvds_encoder->panel_bridge = - devm_drm_panel_bridge_add_typed(dev, panel, - DRM_MODE_CONNECTOR_LVDS); - if (IS_ERR(lvds_encoder->panel_bridge)) - return PTR_ERR(lvds_encoder->panel_bridge); - - /* The panel_bridge bridge is attached to the panel's of_node, - * but we need a bridge attached to our of_node for our user - * to look up. - */ - lvds_encoder->bridge.of_node = dev->of_node; - lvds_encoder->bridge.funcs = &funcs; - drm_bridge_add(&lvds_encoder->bridge); - - platform_set_drvdata(pdev, lvds_encoder); - - return 0; -} - -static int lvds_encoder_remove(struct platform_device *pdev) -{ - struct lvds_encoder *lvds_encoder = platform_get_drvdata(pdev); - - drm_bridge_remove(&lvds_encoder->bridge); - - return 0; -} - -static const struct of_device_id lvds_encoder_match[] = { - { .compatible = "lvds-encoder" }, - { .compatible = "thine,thc63lvdm83d" }, - {}, -}; -MODULE_DEVICE_TABLE(of, lvds_encoder_match); - -static struct platform_driver lvds_encoder_driver = { - .probe = lvds_encoder_probe, - .remove = lvds_encoder_remove, - .driver = { - .name = "lvds-encoder", - .of_match_table = lvds_encoder_match, - }, -}; -module_platform_driver(lvds_encoder_driver); - -MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); -MODULE_DESCRIPTION("Transparent parallel to LVDS encoder"); -MODULE_LICENSE("GPL");
lvds-encoder.c implementation is also suitable for LVDS decoders, not just LVDS encoders. Instead of creating a new driver for addressing support for transparent LVDS decoders, repurpose lvds-encoder.c for the greater good. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> --- v2->v3: * No change v1->v2: * No change --- drivers/gpu/drm/bridge/Kconfig | 8 +- drivers/gpu/drm/bridge/Makefile | 2 +- drivers/gpu/drm/bridge/lvds-codec.c | 131 ++++++++++++++++++++++++++++ drivers/gpu/drm/bridge/lvds-encoder.c | 155 ---------------------------------- 4 files changed, 136 insertions(+), 160 deletions(-) create mode 100644 drivers/gpu/drm/bridge/lvds-codec.c delete mode 100644 drivers/gpu/drm/bridge/lvds-encoder.c