| Message ID | 1571849351-819-2-git-send-email-asutoshd@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | None | expand |
Hi Asutosh, Please check comments. -----Original Message----- From: Asutosh Das <asutoshd@codeaurora.org> Sent: Wednesday, October 23, 2019 5:49 PM To: cang@codeaurora.org; rnayak@codeaurora.org; vinholikatti@gmail.com; jejb@linux.vnet.ibm.com; martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org; kernel-team@android.com; saravanak@google.com; salyzyn@google.com; Asutosh Das <asutoshd@codeaurora.org>; Andy Gross <agross@kernel.org>; Alim Akhtar <alim.akhtar@samsung.com>; Avri Altman <avri.altman@wdc.com>; Pedro Sousa <pedrom.sousa@synopsys.com>; James E.J. Bottomley <jejb@linux.ibm.com>; open list:ARM/QUALCOMM SUPPORT <linux-arm-msm@vger.kernel.org>; open list <linux-kernel@vger.kernel.org> Subject: [PATCH v3 2/2] scsi: ufs-qcom: enter and exit hibern8 during clock scaling Qualcomm controller needs to be in hibern8 before scaling clocks. This change puts the controller in hibern8 state before scaling and brings it out after scaling of clocks. Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> --- drivers/scsi/ufs/ufs-qcom.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c index a5b7148..55b1de5 100644 --- a/drivers/scsi/ufs/ufs-qcom.c +++ b/drivers/scsi/ufs/ufs-qcom.c @@ -1305,18 +1305,27 @@ static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba, int err = 0; if (status == PRE_CHANGE) { + err = ufshcd_uic_hibern8_enter(hba); + if (err) + return err; if (scale_up) err = ufs_qcom_clk_scale_up_pre_change(hba); else err = ufs_qcom_clk_scale_down_pre_change(hba); + if (err) + ufshcd_uic_hibern8_exit(hba); + } else { if (scale_up) err = ufs_qcom_clk_scale_up_post_change(hba); else err = ufs_qcom_clk_scale_down_post_change(hba); - if (err || !dev_req_params) + + if (err || !dev_req_params) { + ufshcd_uic_hibern8_exit(hba); goto out; + } ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx, @@ -1324,6 +1333,7 @@ static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba, dev_req_params->hs_rate, false); ufs_qcom_update_bus_bw_vote(host); + ufshcd_uic_hibern8_exit(hba); Here you are creating the possibility of returning a success even if hibern8 exit fails. If hibern8 exit fails the ufs recovery will be triggered and "err" variable will not get updated in this function, how is this handled? Did you tested this possibility? } out:
Hi Pedro, On 11/11/2019 7:54 AM, Pedro Sousa wrote: > Hi Asutosh, > > Please check comments. Sorry for missing out on this and thanks for your review. > > -----Original Message----- > From: Asutosh Das <asutoshd@codeaurora.org> > Sent: Wednesday, October 23, 2019 5:49 PM > To: cang@codeaurora.org; rnayak@codeaurora.org; vinholikatti@gmail.com; jejb@linux.vnet.ibm.com; martin.petersen@oracle.com > Cc: linux-scsi@vger.kernel.org; kernel-team@android.com; saravanak@google.com; salyzyn@google.com; Asutosh Das <asutoshd@codeaurora.org>; Andy Gross <agross@kernel.org>; Alim Akhtar <alim.akhtar@samsung.com>; Avri Altman <avri.altman@wdc.com>; Pedro Sousa <pedrom.sousa@synopsys.com>; James E.J. Bottomley <jejb@linux.ibm.com>; open list:ARM/QUALCOMM SUPPORT <linux-arm-msm@vger.kernel.org>; open list <linux-kernel@vger.kernel.org> > Subject: [PATCH v3 2/2] scsi: ufs-qcom: enter and exit hibern8 during clock scaling > > Qualcomm controller needs to be in hibern8 before scaling clocks. > This change puts the controller in hibern8 state before scaling > and brings it out after scaling of clocks. > > Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> > --- > drivers/scsi/ufs/ufs-qcom.c | 12 +++++++++++- > 1 file changed, 11 insertions(+), 1 deletion(-) > > diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c > index a5b7148..55b1de5 100644 > --- a/drivers/scsi/ufs/ufs-qcom.c > +++ b/drivers/scsi/ufs/ufs-qcom.c > @@ -1305,18 +1305,27 @@ static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba, > int err = 0; > > if (status == PRE_CHANGE) { > + err = ufshcd_uic_hibern8_enter(hba); > + if (err) > + return err; > if (scale_up) > err = ufs_qcom_clk_scale_up_pre_change(hba); > else > err = ufs_qcom_clk_scale_down_pre_change(hba); > + if (err) > + ufshcd_uic_hibern8_exit(hba); > + > } else { > if (scale_up) > err = ufs_qcom_clk_scale_up_post_change(hba); > else > err = ufs_qcom_clk_scale_down_post_change(hba); > > - if (err || !dev_req_params) > + > + if (err || !dev_req_params) { > + ufshcd_uic_hibern8_exit(hba); > goto out; > + } > > ufs_qcom_cfg_timers(hba, > dev_req_params->gear_rx, > @@ -1324,6 +1333,7 @@ static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba, > dev_req_params->hs_rate, > false); > ufs_qcom_update_bus_bw_vote(host); > + ufshcd_uic_hibern8_exit(hba); > > Here you are creating the possibility of returning a success even if hibern8 exit fails. > If hibern8 exit fails the ufs recovery will be triggered and "err" variable will not get updated > in this function, how is this handled? Did you tested this possibility? > > } > > out: > Yes - I agree with your comment. The error should be propagated from this function correctly to the caller. I'll push another version.
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c index a5b7148..55b1de5 100644 --- a/drivers/scsi/ufs/ufs-qcom.c +++ b/drivers/scsi/ufs/ufs-qcom.c @@ -1305,18 +1305,27 @@ static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba, int err = 0; if (status == PRE_CHANGE) { + err = ufshcd_uic_hibern8_enter(hba); + if (err) + return err; if (scale_up) err = ufs_qcom_clk_scale_up_pre_change(hba); else err = ufs_qcom_clk_scale_down_pre_change(hba); + if (err) + ufshcd_uic_hibern8_exit(hba); + } else { if (scale_up) err = ufs_qcom_clk_scale_up_post_change(hba); else err = ufs_qcom_clk_scale_down_post_change(hba); - if (err || !dev_req_params) + + if (err || !dev_req_params) { + ufshcd_uic_hibern8_exit(hba); goto out; + } ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx, @@ -1324,6 +1333,7 @@ static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba, dev_req_params->hs_rate, false); ufs_qcom_update_bus_bw_vote(host); + ufshcd_uic_hibern8_exit(hba); } out:
Qualcomm controller needs to be in hibern8 before scaling clocks. This change puts the controller in hibern8 state before scaling and brings it out after scaling of clocks. Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> --- drivers/scsi/ufs/ufs-qcom.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)