diff mbox series

[v3,1/3] watchdog: sama5d4_wdt: cleanup the bit definitions

Message ID 1573474383-21915-1-git-send-email-eugen.hristev@microchip.com (mailing list archive)
State New, archived
Headers show
Series [v3,1/3] watchdog: sama5d4_wdt: cleanup the bit definitions | expand

Commit Message

Eugen Hristev Nov. 11, 2019, 12:13 p.m. UTC 
From: Eugen Hristev <eugen.hristev@microchip.com>

Cleanup the macro definitions to use BIT and align with two spaces.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
Changes in v3:
- new patch as requested from review on ML

 drivers/watchdog/at91sam9_wdt.h | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

Comments

Guenter Roeck Nov. 12, 2019, 1:47 p.m. UTC | #1 
On 11/11/19 4:13 AM, Eugen.Hristev@microchip.com wrote:
> From: Eugen Hristev <eugen.hristev@microchip.com>
> 
> Cleanup the macro definitions to use BIT and align with two spaces.
> 
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
> ---
> Changes in v3:
> - new patch as requested from review on ML
> 
>   drivers/watchdog/at91sam9_wdt.h | 30 +++++++++++++++---------------
>   1 file changed, 15 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/watchdog/at91sam9_wdt.h b/drivers/watchdog/at91sam9_wdt.h
> index 390941c..2ca5fc5 100644
> --- a/drivers/watchdog/at91sam9_wdt.h
> +++ b/drivers/watchdog/at91sam9_wdt.h
> @@ -14,23 +14,23 @@
>   #define AT91_WDT_H
>   
>   #define AT91_WDT_CR		0x00			/* Watchdog Control Register */
> -#define		AT91_WDT_WDRSTT		(1    << 0)		/* Restart */
> -#define		AT91_WDT_KEY		(0xa5 << 24)		/* KEY Password */
> +#define  AT91_WDT_WDRSTT	BIT(0)			/* Restart */

Using BIT() requires including linux/bits.h.

> +#define  AT91_WDT_KEY		(0xa5 << 24)		/* KEY Password */
>   
>   #define AT91_WDT_MR		0x04			/* Watchdog Mode Register */
> -#define		AT91_WDT_WDV		(0xfff << 0)		/* Counter Value */
> -#define			AT91_WDT_SET_WDV(x)	((x) & AT91_WDT_WDV)
> -#define		AT91_WDT_WDFIEN		(1     << 12)		/* Fault Interrupt Enable */
> -#define		AT91_WDT_WDRSTEN	(1     << 13)		/* Reset Processor */
> -#define		AT91_WDT_WDRPROC	(1     << 14)		/* Timer Restart */
> -#define		AT91_WDT_WDDIS		(1     << 15)		/* Watchdog Disable */
> -#define		AT91_WDT_WDD		(0xfff << 16)		/* Delta Value */
> -#define			AT91_WDT_SET_WDD(x)	(((x) << 16) & AT91_WDT_WDD)
> -#define		AT91_WDT_WDDBGHLT	(1     << 28)		/* Debug Halt */
> -#define		AT91_WDT_WDIDLEHLT	(1     << 29)		/* Idle Halt */
> +#define  AT91_WDT_WDV		(0xfff << 0)		/* Counter Value */
> +#define  AT91_WDT_SET_WDV(x)	((x) & AT91_WDT_WDV)
> +#define  AT91_WDT_WDFIEN	BIT(12)		/* Fault Interrupt Enable */
> +#define  AT91_WDT_WDRSTEN	BIT(13)		/* Reset Processor */
> +#define  AT91_WDT_WDRPROC	BIT(14)		/* Timer Restart */
> +#define  AT91_WDT_WDDIS		BIT(15)		/* Watchdog Disable */
> +#define  AT91_WDT_WDD		(0xfff << 16)		/* Delta Value */
> +#define  AT91_WDT_SET_WDD(x)	(((x) << 16) & AT91_WDT_WDD)
> +#define  AT91_WDT_WDDBGHLT	BIT(28)		/* Debug Halt */
> +#define  AT91_WDT_WDIDLEHLT	BIT(29)		/* Idle Halt */
>   
> -#define AT91_WDT_SR		0x08			/* Watchdog Status Register */
> -#define		AT91_WDT_WDUNF		(1 << 0)		/* Watchdog Underflow */
> -#define		AT91_WDT_WDERR		(1 << 1)		/* Watchdog Error */
> +#define AT91_WDT_SR		0x08		/* Watchdog Status Register */
> +#define  AT91_WDT_WDUNF		BIT(0)		/* Watchdog Underflow */
> +#define  AT91_WDT_WDERR		BIT(1)		/* Watchdog Error */
>   
>   #endif
>
Eugen Hristev Nov. 14, 2019, 11:34 a.m. UTC | #2 
On 12.11.2019 15:47, Guenter Roeck wrote:

> 
> On 11/11/19 4:13 AM, Eugen.Hristev@microchip.com wrote:
>> From: Eugen Hristev <eugen.hristev@microchip.com>
>>
>> Cleanup the macro definitions to use BIT and align with two spaces.
>>
>> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
>> ---
>> Changes in v3:
>> - new patch as requested from review on ML
>>
>>   drivers/watchdog/at91sam9_wdt.h | 30 +++++++++++++++---------------
>>   1 file changed, 15 insertions(+), 15 deletions(-)
>>
>> diff --git a/drivers/watchdog/at91sam9_wdt.h 
>> b/drivers/watchdog/at91sam9_wdt.h
>> index 390941c..2ca5fc5 100644
>> --- a/drivers/watchdog/at91sam9_wdt.h
>> +++ b/drivers/watchdog/at91sam9_wdt.h
>> @@ -14,23 +14,23 @@
>>   #define AT91_WDT_H
>>   #define AT91_WDT_CR        0x00            /* Watchdog Control 
>> Register */
>> -#define        AT91_WDT_WDRSTT        (1    << 0)        /* Restart */
>> -#define        AT91_WDT_KEY        (0xa5 << 24)        /* KEY 
>> Password */
>> +#define  AT91_WDT_WDRSTT    BIT(0)            /* Restart */
> 
> Using BIT() requires including linux/bits.h.


Hi Guenter,

The C files include/will include the bits.h as the drivers use this 
definition header, or, you have something else in mind ?

Thanks,
Eugen

> 
>> +#define  AT91_WDT_KEY        (0xa5 << 24)        /* KEY Password */
>>   #define AT91_WDT_MR        0x04            /* Watchdog Mode Register */
>> -#define        AT91_WDT_WDV        (0xfff << 0)        /* Counter 
>> Value */
>> -#define            AT91_WDT_SET_WDV(x)    ((x) & AT91_WDT_WDV)
>> -#define        AT91_WDT_WDFIEN        (1     << 12)        /* Fault 
>> Interrupt Enable */
>> -#define        AT91_WDT_WDRSTEN    (1     << 13)        /* Reset 
>> Processor */
>> -#define        AT91_WDT_WDRPROC    (1     << 14)        /* Timer 
>> Restart */
>> -#define        AT91_WDT_WDDIS        (1     << 15)        /* Watchdog 
>> Disable */
>> -#define        AT91_WDT_WDD        (0xfff << 16)        /* Delta 
>> Value */
>> -#define            AT91_WDT_SET_WDD(x)    (((x) << 16) & AT91_WDT_WDD)
>> -#define        AT91_WDT_WDDBGHLT    (1     << 28)        /* Debug 
>> Halt */
>> -#define        AT91_WDT_WDIDLEHLT    (1     << 29)        /* Idle 
>> Halt */
>> +#define  AT91_WDT_WDV        (0xfff << 0)        /* Counter Value */
>> +#define  AT91_WDT_SET_WDV(x)    ((x) & AT91_WDT_WDV)
>> +#define  AT91_WDT_WDFIEN    BIT(12)        /* Fault Interrupt Enable */
>> +#define  AT91_WDT_WDRSTEN    BIT(13)        /* Reset Processor */
>> +#define  AT91_WDT_WDRPROC    BIT(14)        /* Timer Restart */
>> +#define  AT91_WDT_WDDIS        BIT(15)        /* Watchdog Disable */
>> +#define  AT91_WDT_WDD        (0xfff << 16)        /* Delta Value */
>> +#define  AT91_WDT_SET_WDD(x)    (((x) << 16) & AT91_WDT_WDD)
>> +#define  AT91_WDT_WDDBGHLT    BIT(28)        /* Debug Halt */
>> +#define  AT91_WDT_WDIDLEHLT    BIT(29)        /* Idle Halt */
>> -#define AT91_WDT_SR        0x08            /* Watchdog Status 
>> Register */
>> -#define        AT91_WDT_WDUNF        (1 << 0)        /* Watchdog 
>> Underflow */
>> -#define        AT91_WDT_WDERR        (1 << 1)        /* Watchdog 
>> Error */
>> +#define AT91_WDT_SR        0x08        /* Watchdog Status Register */
>> +#define  AT91_WDT_WDUNF        BIT(0)        /* Watchdog Underflow */
>> +#define  AT91_WDT_WDERR        BIT(1)        /* Watchdog Error */
>>   #endif
>>
>
Guenter Roeck Nov. 14, 2019, 4:08 p.m. UTC | #3 
On Thu, Nov 14, 2019 at 11:34:31AM +0000, Eugen.Hristev@microchip.com wrote:
> 
> 
> On 12.11.2019 15:47, Guenter Roeck wrote:
> 
> > 
> > On 11/11/19 4:13 AM, Eugen.Hristev@microchip.com wrote:
> >> From: Eugen Hristev <eugen.hristev@microchip.com>
> >>
> >> Cleanup the macro definitions to use BIT and align with two spaces.
> >>
> >> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
> >> ---
> >> Changes in v3:
> >> - new patch as requested from review on ML
> >>
> >>   drivers/watchdog/at91sam9_wdt.h | 30 +++++++++++++++---------------
> >>   1 file changed, 15 insertions(+), 15 deletions(-)
> >>
> >> diff --git a/drivers/watchdog/at91sam9_wdt.h 
> >> b/drivers/watchdog/at91sam9_wdt.h
> >> index 390941c..2ca5fc5 100644
> >> --- a/drivers/watchdog/at91sam9_wdt.h
> >> +++ b/drivers/watchdog/at91sam9_wdt.h
> >> @@ -14,23 +14,23 @@
> >>   #define AT91_WDT_H
> >>   #define AT91_WDT_CR        0x00            /* Watchdog Control 
> >> Register */
> >> -#define        AT91_WDT_WDRSTT        (1    << 0)        /* Restart */
> >> -#define        AT91_WDT_KEY        (0xa5 << 24)        /* KEY 
> >> Password */
> >> +#define  AT91_WDT_WDRSTT    BIT(0)            /* Restart */
> > 
> > Using BIT() requires including linux/bits.h.
> 
> 
> Hi Guenter,
> 
> The C files include/will include the bits.h as the drivers use this 
> definition header, or, you have something else in mind ?
> 
You are supposed to include the file where it is used. If the C file
uses it again, it will need to include it again.

Guenter

> Thanks,
> Eugen
> 
> > 
> >> +#define  AT91_WDT_KEY        (0xa5 << 24)        /* KEY Password */
> >>   #define AT91_WDT_MR        0x04            /* Watchdog Mode Register */
> >> -#define        AT91_WDT_WDV        (0xfff << 0)        /* Counter 
> >> Value */
> >> -#define            AT91_WDT_SET_WDV(x)    ((x) & AT91_WDT_WDV)
> >> -#define        AT91_WDT_WDFIEN        (1     << 12)        /* Fault 
> >> Interrupt Enable */
> >> -#define        AT91_WDT_WDRSTEN    (1     << 13)        /* Reset 
> >> Processor */
> >> -#define        AT91_WDT_WDRPROC    (1     << 14)        /* Timer 
> >> Restart */
> >> -#define        AT91_WDT_WDDIS        (1     << 15)        /* Watchdog 
> >> Disable */
> >> -#define        AT91_WDT_WDD        (0xfff << 16)        /* Delta 
> >> Value */
> >> -#define            AT91_WDT_SET_WDD(x)    (((x) << 16) & AT91_WDT_WDD)
> >> -#define        AT91_WDT_WDDBGHLT    (1     << 28)        /* Debug 
> >> Halt */
> >> -#define        AT91_WDT_WDIDLEHLT    (1     << 29)        /* Idle 
> >> Halt */
> >> +#define  AT91_WDT_WDV        (0xfff << 0)        /* Counter Value */
> >> +#define  AT91_WDT_SET_WDV(x)    ((x) & AT91_WDT_WDV)
> >> +#define  AT91_WDT_WDFIEN    BIT(12)        /* Fault Interrupt Enable */
> >> +#define  AT91_WDT_WDRSTEN    BIT(13)        /* Reset Processor */
> >> +#define  AT91_WDT_WDRPROC    BIT(14)        /* Timer Restart */
> >> +#define  AT91_WDT_WDDIS        BIT(15)        /* Watchdog Disable */
> >> +#define  AT91_WDT_WDD        (0xfff << 16)        /* Delta Value */
> >> +#define  AT91_WDT_SET_WDD(x)    (((x) << 16) & AT91_WDT_WDD)
> >> +#define  AT91_WDT_WDDBGHLT    BIT(28)        /* Debug Halt */
> >> +#define  AT91_WDT_WDIDLEHLT    BIT(29)        /* Idle Halt */
> >> -#define AT91_WDT_SR        0x08            /* Watchdog Status 
> >> Register */
> >> -#define        AT91_WDT_WDUNF        (1 << 0)        /* Watchdog 
> >> Underflow */
> >> -#define        AT91_WDT_WDERR        (1 << 1)        /* Watchdog 
> >> Error */
> >> +#define AT91_WDT_SR        0x08        /* Watchdog Status Register */
> >> +#define  AT91_WDT_WDUNF        BIT(0)        /* Watchdog Underflow */
> >> +#define  AT91_WDT_WDERR        BIT(1)        /* Watchdog Error */
> >>   #endif
> >>
> >
diff mbox series

Patch

diff --git a/drivers/watchdog/at91sam9_wdt.h b/drivers/watchdog/at91sam9_wdt.h
index 390941c..2ca5fc5 100644
--- a/drivers/watchdog/at91sam9_wdt.h
+++ b/drivers/watchdog/at91sam9_wdt.h
@@ -14,23 +14,23 @@ 
 #define AT91_WDT_H
 
 #define AT91_WDT_CR		0x00			/* Watchdog Control Register */
-#define		AT91_WDT_WDRSTT		(1    << 0)		/* Restart */
-#define		AT91_WDT_KEY		(0xa5 << 24)		/* KEY Password */
+#define  AT91_WDT_WDRSTT	BIT(0)			/* Restart */
+#define  AT91_WDT_KEY		(0xa5 << 24)		/* KEY Password */
 
 #define AT91_WDT_MR		0x04			/* Watchdog Mode Register */
-#define		AT91_WDT_WDV		(0xfff << 0)		/* Counter Value */
-#define			AT91_WDT_SET_WDV(x)	((x) & AT91_WDT_WDV)
-#define		AT91_WDT_WDFIEN		(1     << 12)		/* Fault Interrupt Enable */
-#define		AT91_WDT_WDRSTEN	(1     << 13)		/* Reset Processor */
-#define		AT91_WDT_WDRPROC	(1     << 14)		/* Timer Restart */
-#define		AT91_WDT_WDDIS		(1     << 15)		/* Watchdog Disable */
-#define		AT91_WDT_WDD		(0xfff << 16)		/* Delta Value */
-#define			AT91_WDT_SET_WDD(x)	(((x) << 16) & AT91_WDT_WDD)
-#define		AT91_WDT_WDDBGHLT	(1     << 28)		/* Debug Halt */
-#define		AT91_WDT_WDIDLEHLT	(1     << 29)		/* Idle Halt */
+#define  AT91_WDT_WDV		(0xfff << 0)		/* Counter Value */
+#define  AT91_WDT_SET_WDV(x)	((x) & AT91_WDT_WDV)
+#define  AT91_WDT_WDFIEN	BIT(12)		/* Fault Interrupt Enable */
+#define  AT91_WDT_WDRSTEN	BIT(13)		/* Reset Processor */
+#define  AT91_WDT_WDRPROC	BIT(14)		/* Timer Restart */
+#define  AT91_WDT_WDDIS		BIT(15)		/* Watchdog Disable */
+#define  AT91_WDT_WDD		(0xfff << 16)		/* Delta Value */
+#define  AT91_WDT_SET_WDD(x)	(((x) << 16) & AT91_WDT_WDD)
+#define  AT91_WDT_WDDBGHLT	BIT(28)		/* Debug Halt */
+#define  AT91_WDT_WDIDLEHLT	BIT(29)		/* Idle Halt */
 
-#define AT91_WDT_SR		0x08			/* Watchdog Status Register */
-#define		AT91_WDT_WDUNF		(1 << 0)		/* Watchdog Underflow */
-#define		AT91_WDT_WDERR		(1 << 1)		/* Watchdog Error */
+#define AT91_WDT_SR		0x08		/* Watchdog Status Register */
+#define  AT91_WDT_WDUNF		BIT(0)		/* Watchdog Underflow */
+#define  AT91_WDT_WDERR		BIT(1)		/* Watchdog Error */
 
 #endif