diff mbox series

[v9,QEMU,12/15] vfio: Add load state functions to SaveVMHandlers

Message ID 1573578324-8389-13-git-send-email-kwankhede@nvidia.com (mailing list archive)
State New, archived
Headers show
Series Add migration support for VFIO devices | expand

Commit Message

Kirti Wankhede Nov. 12, 2019, 5:05 p.m. UTC 
Sequence  during _RESUMING device state:
While data for this device is available, repeat below steps:
a. read data_offset from where user application should write data.
b. write data of data_size to migration region from data_offset.
c. write data_size which indicates vendor driver that data is written in
   staging buffer.

For user, data is opaque. User should write data in the same order as
received.

Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Neo Jia <cjia@nvidia.com>
---
 hw/vfio/migration.c  | 170 +++++++++++++++++++++++++++++++++++++++++++++++++++
 hw/vfio/trace-events |   3 +
 2 files changed, 173 insertions(+)

Comments

Alex Williamson Nov. 14, 2019, 5:05 a.m. UTC | #1 
On Tue, 12 Nov 2019 22:35:21 +0530
Kirti Wankhede <kwankhede@nvidia.com> wrote:

> Sequence  during _RESUMING device state:
> While data for this device is available, repeat below steps:
> a. read data_offset from where user application should write data.
> b. write data of data_size to migration region from data_offset.
> c. write data_size which indicates vendor driver that data is written in
>    staging buffer.
> 
> For user, data is opaque. User should write data in the same order as
> received.
> 
> Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
> Reviewed-by: Neo Jia <cjia@nvidia.com>
> ---
>  hw/vfio/migration.c  | 170 +++++++++++++++++++++++++++++++++++++++++++++++++++
>  hw/vfio/trace-events |   3 +
>  2 files changed, 173 insertions(+)
> 
> diff --git a/hw/vfio/migration.c b/hw/vfio/migration.c
> index f890e864e174..16e12586fe8b 100644
> --- a/hw/vfio/migration.c
> +++ b/hw/vfio/migration.c
> @@ -251,6 +251,33 @@ static int vfio_save_device_config_state(QEMUFile *f, void *opaque)
>      return qemu_file_get_error(f);
>  }
>  
> +static int vfio_load_device_config_state(QEMUFile *f, void *opaque)
> +{
> +    VFIODevice *vbasedev = opaque;
> +    uint64_t data;
> +
> +    if (vbasedev->ops && vbasedev->ops->vfio_load_config) {
> +        int ret;
> +
> +        ret = vbasedev->ops->vfio_load_config(vbasedev, f);
> +        if (ret) {
> +            error_report("%s: Failed to load device config space",
> +                         vbasedev->name);
> +            return ret;
> +        }
> +    }
> +
> +    data = qemu_get_be64(f);
> +    if (data != VFIO_MIG_FLAG_END_OF_STATE) {
> +        error_report("%s: Failed loading device config space, "
> +                     "end flag incorrect 0x%"PRIx64, vbasedev->name, data);
> +        return -EINVAL;
> +    }
> +
> +    trace_vfio_load_device_config_state(vbasedev->name);
> +    return qemu_file_get_error(f);
> +}
> +
>  /* ---------------------------------------------------------------------- */
>  
>  static int vfio_save_setup(QEMUFile *f, void *opaque)
> @@ -410,12 +437,155 @@ static int vfio_save_complete_precopy(QEMUFile *f, void *opaque)
>      return ret;
>  }
>  
> +static int vfio_load_setup(QEMUFile *f, void *opaque)
> +{
> +    VFIODevice *vbasedev = opaque;
> +    VFIOMigration *migration = vbasedev->migration;
> +    int ret = 0;
> +
> +    if (migration->region.mmaps) {
> +        ret = vfio_region_mmap(&migration->region);
> +        if (ret) {
> +            error_report("%s: Failed to mmap VFIO migration region %d: %s",
> +                         vbasedev->name, migration->region.nr,
> +                         strerror(-ret));
> +            return ret;
> +        }
> +    }
> +
> +    ret = vfio_migration_set_state(vbasedev, VFIO_DEVICE_STATE_RESUMING, 0);
> +    if (ret) {
> +        error_report("%s: Failed to set state RESUMING", vbasedev->name);
> +    }
> +    return ret;
> +}
> +
> +static int vfio_load_cleanup(void *opaque)
> +{
> +    vfio_save_cleanup(opaque);
> +    return 0;
> +}
> +
> +static int vfio_load_state(QEMUFile *f, void *opaque, int version_id)
> +{
> +    VFIODevice *vbasedev = opaque;
> +    VFIOMigration *migration = vbasedev->migration;
> +    int ret = 0;
> +    uint64_t data, data_size;
> +
> +    data = qemu_get_be64(f);
> +    while (data != VFIO_MIG_FLAG_END_OF_STATE) {
> +
> +        trace_vfio_load_state(vbasedev->name, data);
> +
> +        switch (data) {
> +        case VFIO_MIG_FLAG_DEV_CONFIG_STATE:
> +        {
> +            ret = vfio_load_device_config_state(f, opaque);
> +            if (ret) {
> +                return ret;
> +            }
> +            break;
> +        }
> +        case VFIO_MIG_FLAG_DEV_SETUP_STATE:
> +        {
> +            data = qemu_get_be64(f);
> +            if (data == VFIO_MIG_FLAG_END_OF_STATE) {
> +                return ret;
> +            } else {
> +                error_report("%s: SETUP STATE: EOS not found 0x%"PRIx64,
> +                             vbasedev->name, data);
> +                return -EINVAL;
> +            }
> +            break;
> +        }
> +        case VFIO_MIG_FLAG_DEV_DATA_STATE:
> +        {
> +            VFIORegion *region = &migration->region;
> +            void *buf = NULL;
> +            bool buffer_mmaped = false;
> +            uint64_t data_offset = 0;
> +
> +            data_size = qemu_get_be64(f);
> +            if (data_size == 0) {
> +                break;

We're not writing data_size = 0 to the migration region, so these
aren't used to synchronization, why are we writing them into the
migration stream?

> +            }
> +
> +            ret = pread(vbasedev->fd, &data_offset, sizeof(data_offset),
> +                        region->fd_offset +
> +                        offsetof(struct vfio_device_migration_info,
> +                        data_offset));
> +            if (ret != sizeof(data_offset)) {
> +                error_report("%s:Failed to get migration buffer data offset %d",
> +                             vbasedev->name, ret);
> +                return -EINVAL;
> +            }
> +
> +            if (region->mmaps) {
> +                buf = find_data_region(region, data_offset, data_size);
> +            }
> +
> +            buffer_mmaped = (buf != NULL) ? true : false;
> +
> +            if (!buffer_mmaped) {
> +                buf = g_try_malloc0(data_size);
> +                if (!buf) {
> +                    error_report("%s: Error allocating buffer ", __func__);
> +                    return -ENOMEM;
> +                }
> +            }
> +
> +            qemu_get_buffer(f, buf, data_size);
> +
> +            if (!buffer_mmaped) {
> +                ret = pwrite(vbasedev->fd, buf, data_size,
> +                             region->fd_offset + data_offset);
> +                g_free(buf);
> +
> +                if (ret != data_size) {
> +                    error_report("%s: Failed to set migration buffer %d",
> +                                 vbasedev->name, ret);
> +                    return -EINVAL;
> +                }
> +            }

Also assumes the entire data chunk with either mmap'd or not mmap'd,
which is not specified in our API.  Also susceptible to potentially
massive allocations.  The vendor driver can dictate the sequence of
writing data to the device, but it cannot dictate that QEMU sends an
arbitrarily sized contiguous chunk of data.  I think this gives the
vendor driver too much control of the migration responsiveness.  For
instance, QEMU should be able to say this device only gets a 100MB
chunk in the data stream at a time in order to play fairly with other
devices and have a deterministic iteration interval.

> +
> +            ret = pwrite(vbasedev->fd, &data_size, sizeof(data_size),
> +                         region->fd_offset +
> +                       offsetof(struct vfio_device_migration_info, data_size));
> +            if (ret != sizeof(data_size)) {
> +                error_report("%s: Failed to set migration buffer data size %d",
> +                             vbasedev->name, ret);
> +                if (!buffer_mmaped) {
> +                    g_free(buf);
> +                }
> +                return -EINVAL;
> +            }
> +
> +            trace_vfio_load_state_device_data(vbasedev->name, data_offset,
> +                                              data_size);
> +            break;
> +        }
> +        }
> +
> +        ret = qemu_file_get_error(f);
> +        if (ret) {
> +            return ret;
> +        }
> +        data = qemu_get_be64(f);
> +    }
> +
> +    return ret;
> +}
> +
>  static SaveVMHandlers savevm_vfio_handlers = {
>      .save_setup = vfio_save_setup,
>      .save_cleanup = vfio_save_cleanup,
>      .save_live_pending = vfio_save_pending,
>      .save_live_iterate = vfio_save_iterate,
>      .save_live_complete_precopy = vfio_save_complete_precopy,
> +    .load_setup = vfio_load_setup,
> +    .load_cleanup = vfio_load_cleanup,
> +    .load_state = vfio_load_state,
>  };
>  
>  /* ---------------------------------------------------------------------- */
> diff --git a/hw/vfio/trace-events b/hw/vfio/trace-events
> index bdf40ba368c7..ac065b559f4e 100644
> --- a/hw/vfio/trace-events
> +++ b/hw/vfio/trace-events
> @@ -157,3 +157,6 @@ vfio_save_device_config_state(char *name) " (%s)"
>  vfio_save_pending(char *name, uint64_t precopy, uint64_t postcopy, uint64_t compatible) " (%s) precopy 0x%"PRIx64" postcopy 0x%"PRIx64" compatible 0x%"PRIx64
>  vfio_save_iterate(char *name, int data_size) " (%s) data_size %d"
>  vfio_save_complete_precopy(char *name) " (%s)"
> +vfio_load_device_config_state(char *name) " (%s)"
> +vfio_load_state(char *name, uint64_t data) " (%s) data 0x%"PRIx64
> +vfio_load_state_device_data(char *name, uint64_t data_offset, uint64_t data_size) " (%s) Offset 0x%"PRIx64" size 0x%"PRIx64
Dr. David Alan Gilbert Nov. 20, 2019, 6:32 p.m. UTC | #2 
* Kirti Wankhede (kwankhede@nvidia.com) wrote:
> Sequence  during _RESUMING device state:
> While data for this device is available, repeat below steps:
> a. read data_offset from where user application should write data.
> b. write data of data_size to migration region from data_offset.
> c. write data_size which indicates vendor driver that data is written in
>    staging buffer.
> 
> For user, data is opaque. User should write data in the same order as
> received.
> 
> Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
> Reviewed-by: Neo Jia <cjia@nvidia.com>
> ---
>  hw/vfio/migration.c  | 170 +++++++++++++++++++++++++++++++++++++++++++++++++++
>  hw/vfio/trace-events |   3 +
>  2 files changed, 173 insertions(+)
> 
> diff --git a/hw/vfio/migration.c b/hw/vfio/migration.c
> index f890e864e174..16e12586fe8b 100644
> --- a/hw/vfio/migration.c
> +++ b/hw/vfio/migration.c
> @@ -251,6 +251,33 @@ static int vfio_save_device_config_state(QEMUFile *f, void *opaque)
>      return qemu_file_get_error(f);
>  }
>  
> +static int vfio_load_device_config_state(QEMUFile *f, void *opaque)
> +{
> +    VFIODevice *vbasedev = opaque;
> +    uint64_t data;
> +
> +    if (vbasedev->ops && vbasedev->ops->vfio_load_config) {
> +        int ret;
> +
> +        ret = vbasedev->ops->vfio_load_config(vbasedev, f);
> +        if (ret) {
> +            error_report("%s: Failed to load device config space",
> +                         vbasedev->name);
> +            return ret;
> +        }
> +    }
> +
> +    data = qemu_get_be64(f);
> +    if (data != VFIO_MIG_FLAG_END_OF_STATE) {
> +        error_report("%s: Failed loading device config space, "
> +                     "end flag incorrect 0x%"PRIx64, vbasedev->name, data);
> +        return -EINVAL;
> +    }
> +
> +    trace_vfio_load_device_config_state(vbasedev->name);
> +    return qemu_file_get_error(f);
> +}
> +
>  /* ---------------------------------------------------------------------- */
>  
>  static int vfio_save_setup(QEMUFile *f, void *opaque)
> @@ -410,12 +437,155 @@ static int vfio_save_complete_precopy(QEMUFile *f, void *opaque)
>      return ret;
>  }
>  
> +static int vfio_load_setup(QEMUFile *f, void *opaque)
> +{
> +    VFIODevice *vbasedev = opaque;
> +    VFIOMigration *migration = vbasedev->migration;
> +    int ret = 0;
> +
> +    if (migration->region.mmaps) {
> +        ret = vfio_region_mmap(&migration->region);
> +        if (ret) {
> +            error_report("%s: Failed to mmap VFIO migration region %d: %s",
> +                         vbasedev->name, migration->region.nr,
> +                         strerror(-ret));
> +            return ret;
> +        }
> +    }
> +
> +    ret = vfio_migration_set_state(vbasedev, VFIO_DEVICE_STATE_RESUMING, 0);
> +    if (ret) {
> +        error_report("%s: Failed to set state RESUMING", vbasedev->name);
> +    }
> +    return ret;
> +}
> +
> +static int vfio_load_cleanup(void *opaque)
> +{
> +    vfio_save_cleanup(opaque);
> +    return 0;
> +}
> +
> +static int vfio_load_state(QEMUFile *f, void *opaque, int version_id)
> +{
> +    VFIODevice *vbasedev = opaque;
> +    VFIOMigration *migration = vbasedev->migration;
> +    int ret = 0;
> +    uint64_t data, data_size;
> +
> +    data = qemu_get_be64(f);
> +    while (data != VFIO_MIG_FLAG_END_OF_STATE) {
> +
> +        trace_vfio_load_state(vbasedev->name, data);
> +
> +        switch (data) {
> +        case VFIO_MIG_FLAG_DEV_CONFIG_STATE:
> +        {
> +            ret = vfio_load_device_config_state(f, opaque);
> +            if (ret) {
> +                return ret;
> +            }
> +            break;
> +        }
> +        case VFIO_MIG_FLAG_DEV_SETUP_STATE:
> +        {
> +            data = qemu_get_be64(f);
> +            if (data == VFIO_MIG_FLAG_END_OF_STATE) {
> +                return ret;
> +            } else {
> +                error_report("%s: SETUP STATE: EOS not found 0x%"PRIx64,
> +                             vbasedev->name, data);
> +                return -EINVAL;
> +            }
> +            break;
> +        }
> +        case VFIO_MIG_FLAG_DEV_DATA_STATE:
> +        {
> +            VFIORegion *region = &migration->region;
> +            void *buf = NULL;
> +            bool buffer_mmaped = false;
> +            uint64_t data_offset = 0;
> +
> +            data_size = qemu_get_be64(f);
> +            if (data_size == 0) {
> +                break;
> +            }
> +
> +            ret = pread(vbasedev->fd, &data_offset, sizeof(data_offset),
> +                        region->fd_offset +
> +                        offsetof(struct vfio_device_migration_info,
> +                        data_offset));
> +            if (ret != sizeof(data_offset)) {
> +                error_report("%s:Failed to get migration buffer data offset %d",
> +                             vbasedev->name, ret);
> +                return -EINVAL;
> +            }
> +
> +            if (region->mmaps) {
> +                buf = find_data_region(region, data_offset, data_size);
> +            }
> +
> +            buffer_mmaped = (buf != NULL) ? true : false;
> +
> +            if (!buffer_mmaped) {
> +                buf = g_try_malloc0(data_size);
> +                if (!buf) {
> +                    error_report("%s: Error allocating buffer ", __func__);
> +                    return -ENOMEM;
> +                }
> +            }
> +
> +            qemu_get_buffer(f, buf, data_size);
> +
> +            if (!buffer_mmaped) {
> +                ret = pwrite(vbasedev->fd, buf, data_size,
> +                             region->fd_offset + data_offset);
> +                g_free(buf);
> +
> +                if (ret != data_size) {
> +                    error_report("%s: Failed to set migration buffer %d",
> +                                 vbasedev->name, ret);
> +                    return -EINVAL;
> +                }
> +            }
> +
> +            ret = pwrite(vbasedev->fd, &data_size, sizeof(data_size),
> +                         region->fd_offset +
> +                       offsetof(struct vfio_device_migration_info, data_size));
> +            if (ret != sizeof(data_size)) {
> +                error_report("%s: Failed to set migration buffer data size %d",
> +                             vbasedev->name, ret);
> +                if (!buffer_mmaped) {
> +                    g_free(buf);
> +                }
> +                return -EINVAL;
> +            }
> +
> +            trace_vfio_load_state_device_data(vbasedev->name, data_offset,
> +                                              data_size);
> +            break;
> +        }
> +        }
> +
> +        ret = qemu_file_get_error(f);
> +        if (ret) {
> +            return ret;
> +        }
> +        data = qemu_get_be64(f);

It might be useful to check the error flag here as well; since if you've
not really read data then the next case iteration is going to go wrong.

Dave

> +    }
> +
> +    return ret;
> +}
> +
>  static SaveVMHandlers savevm_vfio_handlers = {
>      .save_setup = vfio_save_setup,
>      .save_cleanup = vfio_save_cleanup,
>      .save_live_pending = vfio_save_pending,
>      .save_live_iterate = vfio_save_iterate,
>      .save_live_complete_precopy = vfio_save_complete_precopy,
> +    .load_setup = vfio_load_setup,
> +    .load_cleanup = vfio_load_cleanup,
> +    .load_state = vfio_load_state,
>  };
>  
>  /* ---------------------------------------------------------------------- */
> diff --git a/hw/vfio/trace-events b/hw/vfio/trace-events
> index bdf40ba368c7..ac065b559f4e 100644
> --- a/hw/vfio/trace-events
> +++ b/hw/vfio/trace-events
> @@ -157,3 +157,6 @@ vfio_save_device_config_state(char *name) " (%s)"
>  vfio_save_pending(char *name, uint64_t precopy, uint64_t postcopy, uint64_t compatible) " (%s) precopy 0x%"PRIx64" postcopy 0x%"PRIx64" compatible 0x%"PRIx64
>  vfio_save_iterate(char *name, int data_size) " (%s) data_size %d"
>  vfio_save_complete_precopy(char *name) " (%s)"
> +vfio_load_device_config_state(char *name) " (%s)"
> +vfio_load_state(char *name, uint64_t data) " (%s) data 0x%"PRIx64
> +vfio_load_state_device_data(char *name, uint64_t data_offset, uint64_t data_size) " (%s) Offset 0x%"PRIx64" size 0x%"PRIx64
> -- 
> 2.7.0
> 
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
diff mbox series

Patch

diff --git a/hw/vfio/migration.c b/hw/vfio/migration.c
index f890e864e174..16e12586fe8b 100644
--- a/hw/vfio/migration.c
+++ b/hw/vfio/migration.c
@@ -251,6 +251,33 @@  static int vfio_save_device_config_state(QEMUFile *f, void *opaque)
     return qemu_file_get_error(f);
 }
 
+static int vfio_load_device_config_state(QEMUFile *f, void *opaque)
+{
+    VFIODevice *vbasedev = opaque;
+    uint64_t data;
+
+    if (vbasedev->ops && vbasedev->ops->vfio_load_config) {
+        int ret;
+
+        ret = vbasedev->ops->vfio_load_config(vbasedev, f);
+        if (ret) {
+            error_report("%s: Failed to load device config space",
+                         vbasedev->name);
+            return ret;
+        }
+    }
+
+    data = qemu_get_be64(f);
+    if (data != VFIO_MIG_FLAG_END_OF_STATE) {
+        error_report("%s: Failed loading device config space, "
+                     "end flag incorrect 0x%"PRIx64, vbasedev->name, data);
+        return -EINVAL;
+    }
+
+    trace_vfio_load_device_config_state(vbasedev->name);
+    return qemu_file_get_error(f);
+}
+
 /* ---------------------------------------------------------------------- */
 
 static int vfio_save_setup(QEMUFile *f, void *opaque)
@@ -410,12 +437,155 @@  static int vfio_save_complete_precopy(QEMUFile *f, void *opaque)
     return ret;
 }
 
+static int vfio_load_setup(QEMUFile *f, void *opaque)
+{
+    VFIODevice *vbasedev = opaque;
+    VFIOMigration *migration = vbasedev->migration;
+    int ret = 0;
+
+    if (migration->region.mmaps) {
+        ret = vfio_region_mmap(&migration->region);
+        if (ret) {
+            error_report("%s: Failed to mmap VFIO migration region %d: %s",
+                         vbasedev->name, migration->region.nr,
+                         strerror(-ret));
+            return ret;
+        }
+    }
+
+    ret = vfio_migration_set_state(vbasedev, VFIO_DEVICE_STATE_RESUMING, 0);
+    if (ret) {
+        error_report("%s: Failed to set state RESUMING", vbasedev->name);
+    }
+    return ret;
+}
+
+static int vfio_load_cleanup(void *opaque)
+{
+    vfio_save_cleanup(opaque);
+    return 0;
+}
+
+static int vfio_load_state(QEMUFile *f, void *opaque, int version_id)
+{
+    VFIODevice *vbasedev = opaque;
+    VFIOMigration *migration = vbasedev->migration;
+    int ret = 0;
+    uint64_t data, data_size;
+
+    data = qemu_get_be64(f);
+    while (data != VFIO_MIG_FLAG_END_OF_STATE) {
+
+        trace_vfio_load_state(vbasedev->name, data);
+
+        switch (data) {
+        case VFIO_MIG_FLAG_DEV_CONFIG_STATE:
+        {
+            ret = vfio_load_device_config_state(f, opaque);
+            if (ret) {
+                return ret;
+            }
+            break;
+        }
+        case VFIO_MIG_FLAG_DEV_SETUP_STATE:
+        {
+            data = qemu_get_be64(f);
+            if (data == VFIO_MIG_FLAG_END_OF_STATE) {
+                return ret;
+            } else {
+                error_report("%s: SETUP STATE: EOS not found 0x%"PRIx64,
+                             vbasedev->name, data);
+                return -EINVAL;
+            }
+            break;
+        }
+        case VFIO_MIG_FLAG_DEV_DATA_STATE:
+        {
+            VFIORegion *region = &migration->region;
+            void *buf = NULL;
+            bool buffer_mmaped = false;
+            uint64_t data_offset = 0;
+
+            data_size = qemu_get_be64(f);
+            if (data_size == 0) {
+                break;
+            }
+
+            ret = pread(vbasedev->fd, &data_offset, sizeof(data_offset),
+                        region->fd_offset +
+                        offsetof(struct vfio_device_migration_info,
+                        data_offset));
+            if (ret != sizeof(data_offset)) {
+                error_report("%s:Failed to get migration buffer data offset %d",
+                             vbasedev->name, ret);
+                return -EINVAL;
+            }
+
+            if (region->mmaps) {
+                buf = find_data_region(region, data_offset, data_size);
+            }
+
+            buffer_mmaped = (buf != NULL) ? true : false;
+
+            if (!buffer_mmaped) {
+                buf = g_try_malloc0(data_size);
+                if (!buf) {
+                    error_report("%s: Error allocating buffer ", __func__);
+                    return -ENOMEM;
+                }
+            }
+
+            qemu_get_buffer(f, buf, data_size);
+
+            if (!buffer_mmaped) {
+                ret = pwrite(vbasedev->fd, buf, data_size,
+                             region->fd_offset + data_offset);
+                g_free(buf);
+
+                if (ret != data_size) {
+                    error_report("%s: Failed to set migration buffer %d",
+                                 vbasedev->name, ret);
+                    return -EINVAL;
+                }
+            }
+
+            ret = pwrite(vbasedev->fd, &data_size, sizeof(data_size),
+                         region->fd_offset +
+                       offsetof(struct vfio_device_migration_info, data_size));
+            if (ret != sizeof(data_size)) {
+                error_report("%s: Failed to set migration buffer data size %d",
+                             vbasedev->name, ret);
+                if (!buffer_mmaped) {
+                    g_free(buf);
+                }
+                return -EINVAL;
+            }
+
+            trace_vfio_load_state_device_data(vbasedev->name, data_offset,
+                                              data_size);
+            break;
+        }
+        }
+
+        ret = qemu_file_get_error(f);
+        if (ret) {
+            return ret;
+        }
+        data = qemu_get_be64(f);
+    }
+
+    return ret;
+}
+
 static SaveVMHandlers savevm_vfio_handlers = {
     .save_setup = vfio_save_setup,
     .save_cleanup = vfio_save_cleanup,
     .save_live_pending = vfio_save_pending,
     .save_live_iterate = vfio_save_iterate,
     .save_live_complete_precopy = vfio_save_complete_precopy,
+    .load_setup = vfio_load_setup,
+    .load_cleanup = vfio_load_cleanup,
+    .load_state = vfio_load_state,
 };
 
 /* ---------------------------------------------------------------------- */
diff --git a/hw/vfio/trace-events b/hw/vfio/trace-events
index bdf40ba368c7..ac065b559f4e 100644
--- a/hw/vfio/trace-events
+++ b/hw/vfio/trace-events
@@ -157,3 +157,6 @@  vfio_save_device_config_state(char *name) " (%s)"
 vfio_save_pending(char *name, uint64_t precopy, uint64_t postcopy, uint64_t compatible) " (%s) precopy 0x%"PRIx64" postcopy 0x%"PRIx64" compatible 0x%"PRIx64
 vfio_save_iterate(char *name, int data_size) " (%s) data_size %d"
 vfio_save_complete_precopy(char *name) " (%s)"
+vfio_load_device_config_state(char *name) " (%s)"
+vfio_load_state(char *name, uint64_t data) " (%s) data 0x%"PRIx64
+vfio_load_state_device_data(char *name, uint64_t data_offset, uint64_t data_size) " (%s) Offset 0x%"PRIx64" size 0x%"PRIx64