diff mbox series

arm64: dts: rockchip: Split rk3399-roc-pc for with and without mezzanine board.

Message ID 075b3fa6-dab7-5fec-df68-b53f32bf061b@fivetechno.de (mailing list archive)
State New, archived
Headers show
Series arm64: dts: rockchip: Split rk3399-roc-pc for with and without mezzanine board. | expand

Commit Message

Markus Reichl Nov. 1, 2019, 4:54 p.m. UTC
For rk3399-roc-pc is a mezzanine board available that carries M.2 and
POE interfaces. Use it with a separate dts.

Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3399-roc-pc-mezz.dts  |  52 ++
 .../arm64/boot/dts/rockchip/rk3399-roc-pc.dts | 757 +----------------
 .../boot/dts/rockchip/rk3399-roc-pc.dtsi      | 767 ++++++++++++++++++
 4 files changed, 821 insertions(+), 756 deletions(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi

Comments

Jagan Teki Nov. 1, 2019, 5:18 p.m. UTC | #1
On Fri, Nov 1, 2019 at 10:24 PM Markus Reichl <m.reichl@fivetechno.de> wrote:
>
> For rk3399-roc-pc is a mezzanine board available that carries M.2 and
> POE interfaces. Use it with a separate dts.

Thanks for the patch. Indeed have an impression to go this via overlay
rather than a separate dts since it is HAT for base board, does it
make sense? or is this the way it is handling in rockchip dts files?
Markus Reichl Nov. 2, 2019, 3:51 p.m. UTC | #2
Hi Jagan,

Am 01.11.19 um 18:18 schrieb Jagan Teki:
> On Fri, Nov 1, 2019 at 10:24 PM Markus Reichl <m.reichl@fivetechno.de> wrote:
>>
>> For rk3399-roc-pc is a mezzanine board available that carries M.2 and
>> POE interfaces. Use it with a separate dts.
> 
> Thanks for the patch. Indeed have an impression to go this via overlay
> rather than a separate dts since it is HAT for base board, does it
> make sense? or is this the way it is handling in rockchip dts files?

Please see discussion here:
http://lists.infradead.org/pipermail/linux-rockchip/2019-November/027592.html

Btw. it looks like there is an upcoming roc-pc-plus board with sound and other 
peripherals on board. That could probably use the proposed rk3399-roc-pc.dtsi,
too. 


> 
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>
Heiko Stuebner Nov. 4, 2019, 12:12 p.m. UTC | #3
Hi Markus,

Am Freitag, 1. November 2019, 17:54:23 CET schrieb Markus Reichl:
> For rk3399-roc-pc is a mezzanine board available that carries M.2 and
> POE interfaces. Use it with a separate dts.
> 
> Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
> ---
>  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>  .../boot/dts/rockchip/rk3399-roc-pc-mezz.dts  |  52 ++
>  .../arm64/boot/dts/rockchip/rk3399-roc-pc.dts | 757 +----------------
>  .../boot/dts/rockchip/rk3399-roc-pc.dtsi      | 767 ++++++++++++++++++
>  4 files changed, 821 insertions(+), 756 deletions(-)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> 
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index a959434ad46e..80ee9f1fc5f5 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezz.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
> new file mode 100644
> index 000000000000..ee77677d2cf2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
> @@ -0,0 +1,52 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
> + * Copyright (c) 2019 Markus Reichl <m.reichl@fivetechno.de>
> + */
> +
> +/dts-v1/;
> +#include "rk3399-roc-pc.dtsi"
> +
> +/ {
> +	model = "Firefly ROC-RK3399-PC Mezzanine Board";
> +	compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";

different board with same compatible isn't possible, so
you'll need a new compatible for it and add a new line to
the roc-pc entry in
	Documentation/devicetree/bindings/arm/rockchip.yaml

Either you see it as
- a board + hat, using dt overlay and same compatible
- a completely separate board, which needs a separate
  compatible as well

And as discussed in the previous thread
http://lists.infradead.org/pipermail/linux-rockchip/2019-November/027592.html
but also in Jagan's response that really is somehow a grey area
for something relatively static as the M.2 extension.


Heiko
Jagan Teki Nov. 18, 2019, 11:44 a.m. UTC | #4
On Mon, Nov 4, 2019 at 5:42 PM Heiko Stübner <heiko@sntech.de> wrote:
>
> Hi Markus,
>
> Am Freitag, 1. November 2019, 17:54:23 CET schrieb Markus Reichl:
> > For rk3399-roc-pc is a mezzanine board available that carries M.2 and
> > POE interfaces. Use it with a separate dts.
> >
> > Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
> > ---
> >  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
> >  .../boot/dts/rockchip/rk3399-roc-pc-mezz.dts  |  52 ++
> >  .../arm64/boot/dts/rockchip/rk3399-roc-pc.dts | 757 +----------------
> >  .../boot/dts/rockchip/rk3399-roc-pc.dtsi      | 767 ++++++++++++++++++
> >  4 files changed, 821 insertions(+), 756 deletions(-)
> >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
> >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> > index a959434ad46e..80ee9f1fc5f5 100644
> > --- a/arch/arm64/boot/dts/rockchip/Makefile
> > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> > @@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
> > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezz.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
> > new file mode 100644
> > index 000000000000..ee77677d2cf2
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
> > @@ -0,0 +1,52 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
> > + * Copyright (c) 2019 Markus Reichl <m.reichl@fivetechno.de>
> > + */
> > +
> > +/dts-v1/;
> > +#include "rk3399-roc-pc.dtsi"
> > +
> > +/ {
> > +     model = "Firefly ROC-RK3399-PC Mezzanine Board";
> > +     compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
>
> different board with same compatible isn't possible, so
> you'll need a new compatible for it and add a new line to
> the roc-pc entry in
>         Documentation/devicetree/bindings/arm/rockchip.yaml
>
> Either you see it as
> - a board + hat, using dt overlay and same compatible
> - a completely separate board, which needs a separate
>   compatible as well
>
> And as discussed in the previous thread
> http://lists.infradead.org/pipermail/linux-rockchip/2019-November/027592.html
> but also in Jagan's response that really is somehow a grey area
> for something relatively static as the M.2 extension.

Sorry for late response on this. I still think that the "overlay would
be a better suite" than having separate dts, since it is HAT which is
optional to insert and have possibility of having another HAT if it
really fit into it.

Comments?
Markus Reichl Nov. 18, 2019, 11:57 a.m. UTC | #5
Hi Jagan,

Am 18.11.19 um 12:44 schrieb Jagan Teki:
> On Mon, Nov 4, 2019 at 5:42 PM Heiko Stübner <heiko@sntech.de> wrote:
>>
>> Hi Markus,
>>
>> Am Freitag, 1. November 2019, 17:54:23 CET schrieb Markus Reichl:
>> > For rk3399-roc-pc is a mezzanine board available that carries M.2 and
>> > POE interfaces. Use it with a separate dts.
>> >
>> > Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
>> > ---
>> >  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>> >  .../boot/dts/rockchip/rk3399-roc-pc-mezz.dts  |  52 ++
>> >  .../arm64/boot/dts/rockchip/rk3399-roc-pc.dts | 757 +----------------
>> >  .../boot/dts/rockchip/rk3399-roc-pc.dtsi      | 767 ++++++++++++++++++
>> >  4 files changed, 821 insertions(+), 756 deletions(-)
>> >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
>> >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
>> >
>> > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
>> > index a959434ad46e..80ee9f1fc5f5 100644
>> > --- a/arch/arm64/boot/dts/rockchip/Makefile
>> > +++ b/arch/arm64/boot/dts/rockchip/Makefile
>> > @@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
>> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
>> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
>> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
>> > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezz.dtb
>> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb
>> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
>> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
>> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
>> > new file mode 100644
>> > index 000000000000..ee77677d2cf2
>> > --- /dev/null
>> > +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
>> > @@ -0,0 +1,52 @@
>> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> > +/*
>> > + * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
>> > + * Copyright (c) 2019 Markus Reichl <m.reichl@fivetechno.de>
>> > + */
>> > +
>> > +/dts-v1/;
>> > +#include "rk3399-roc-pc.dtsi"
>> > +
>> > +/ {
>> > +     model = "Firefly ROC-RK3399-PC Mezzanine Board";
>> > +     compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
>>
>> different board with same compatible isn't possible, so
>> you'll need a new compatible for it and add a new line to
>> the roc-pc entry in
>>         Documentation/devicetree/bindings/arm/rockchip.yaml
>>
>> Either you see it as
>> - a board + hat, using dt overlay and same compatible
>> - a completely separate board, which needs a separate
>>   compatible as well
>>
>> And as discussed in the previous thread
>> http://lists.infradead.org/pipermail/linux-rockchip/2019-November/027592.html
>> but also in Jagan's response that really is somehow a grey area
>> for something relatively static as the M.2 extension.
> 
> Sorry for late response on this. I still think that the "overlay would
> be a better suite" than having separate dts, since it is HAT which is
> optional to insert and have possibility of having another HAT if it
> really fit into it.
> 
> Comments?
Presently no other extension board does exist, I don't expect one.

I use it with rootfs on NVME on the mezzanine board.
It is convenient to have the NVME up before going to user space.

The board has SPI-NOR MTD storage to host U-Boot. 
In future U-Boot could boot from NVME directly without needing
an SD or MMC to host the boot kernel.

Gruß,
Heiko Stuebner Nov. 18, 2019, 12:01 p.m. UTC | #6
Am Montag, 18. November 2019, 12:57:16 CET schrieb Markus Reichl:
> Hi Jagan,
> 
> Am 18.11.19 um 12:44 schrieb Jagan Teki:
> > On Mon, Nov 4, 2019 at 5:42 PM Heiko Stübner <heiko@sntech.de> wrote:
> >>
> >> Hi Markus,
> >>
> >> Am Freitag, 1. November 2019, 17:54:23 CET schrieb Markus Reichl:
> >> > For rk3399-roc-pc is a mezzanine board available that carries M.2 and
> >> > POE interfaces. Use it with a separate dts.
> >> >
> >> > Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
> >> > ---
> >> >  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
> >> >  .../boot/dts/rockchip/rk3399-roc-pc-mezz.dts  |  52 ++
> >> >  .../arm64/boot/dts/rockchip/rk3399-roc-pc.dts | 757 +----------------
> >> >  .../boot/dts/rockchip/rk3399-roc-pc.dtsi      | 767 ++++++++++++++++++
> >> >  4 files changed, 821 insertions(+), 756 deletions(-)
> >> >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
> >> >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> >> >
> >> > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> >> > index a959434ad46e..80ee9f1fc5f5 100644
> >> > --- a/arch/arm64/boot/dts/rockchip/Makefile
> >> > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> >> > @@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
> >> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
> >> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
> >> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
> >> > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezz.dtb
> >> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb
> >> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
> >> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
> >> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
> >> > new file mode 100644
> >> > index 000000000000..ee77677d2cf2
> >> > --- /dev/null
> >> > +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
> >> > @@ -0,0 +1,52 @@
> >> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> >> > +/*
> >> > + * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
> >> > + * Copyright (c) 2019 Markus Reichl <m.reichl@fivetechno.de>
> >> > + */
> >> > +
> >> > +/dts-v1/;
> >> > +#include "rk3399-roc-pc.dtsi"
> >> > +
> >> > +/ {
> >> > +     model = "Firefly ROC-RK3399-PC Mezzanine Board";
> >> > +     compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
> >>
> >> different board with same compatible isn't possible, so
> >> you'll need a new compatible for it and add a new line to
> >> the roc-pc entry in
> >>         Documentation/devicetree/bindings/arm/rockchip.yaml
> >>
> >> Either you see it as
> >> - a board + hat, using dt overlay and same compatible
> >> - a completely separate board, which needs a separate
> >>   compatible as well
> >>
> >> And as discussed in the previous thread
> >> http://lists.infradead.org/pipermail/linux-rockchip/2019-November/027592.html
> >> but also in Jagan's response that really is somehow a grey area
> >> for something relatively static as the M.2 extension.
> > 
> > Sorry for late response on this. I still think that the "overlay would
> > be a better suite" than having separate dts, since it is HAT which is
> > optional to insert and have possibility of having another HAT if it
> > really fit into it.
> > 
> > Comments?
> Presently no other extension board does exist, I don't expect one.
> 
> I use it with rootfs on NVME on the mezzanine board.
> It is convenient to have the NVME up before going to user space.

And that is exactly the reason while I think it's sane to have this
as a separate board. For more common hats with random
extended functionality this might be different.

But people attaching the nvme-"hat" will in most all cases do so quite
permanently as well ;-) .

Heiko
Jagan Teki Nov. 18, 2019, 12:03 p.m. UTC | #7
Hi Markus,

On Mon, Nov 18, 2019 at 5:27 PM Markus Reichl <m.reichl@fivetechno.de> wrote:
>
> Hi Jagan,
>
> Am 18.11.19 um 12:44 schrieb Jagan Teki:
> > On Mon, Nov 4, 2019 at 5:42 PM Heiko Stübner <heiko@sntech.de> wrote:
> >>
> >> Hi Markus,
> >>
> >> Am Freitag, 1. November 2019, 17:54:23 CET schrieb Markus Reichl:
> >> > For rk3399-roc-pc is a mezzanine board available that carries M.2 and
> >> > POE interfaces. Use it with a separate dts.
> >> >
> >> > Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
> >> > ---
> >> >  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
> >> >  .../boot/dts/rockchip/rk3399-roc-pc-mezz.dts  |  52 ++
> >> >  .../arm64/boot/dts/rockchip/rk3399-roc-pc.dts | 757 +----------------
> >> >  .../boot/dts/rockchip/rk3399-roc-pc.dtsi      | 767 ++++++++++++++++++
> >> >  4 files changed, 821 insertions(+), 756 deletions(-)
> >> >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
> >> >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> >> >
> >> > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> >> > index a959434ad46e..80ee9f1fc5f5 100644
> >> > --- a/arch/arm64/boot/dts/rockchip/Makefile
> >> > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> >> > @@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
> >> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
> >> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
> >> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
> >> > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezz.dtb
> >> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb
> >> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
> >> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
> >> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
> >> > new file mode 100644
> >> > index 000000000000..ee77677d2cf2
> >> > --- /dev/null
> >> > +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
> >> > @@ -0,0 +1,52 @@
> >> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> >> > +/*
> >> > + * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
> >> > + * Copyright (c) 2019 Markus Reichl <m.reichl@fivetechno.de>
> >> > + */
> >> > +
> >> > +/dts-v1/;
> >> > +#include "rk3399-roc-pc.dtsi"
> >> > +
> >> > +/ {
> >> > +     model = "Firefly ROC-RK3399-PC Mezzanine Board";
> >> > +     compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
> >>
> >> different board with same compatible isn't possible, so
> >> you'll need a new compatible for it and add a new line to
> >> the roc-pc entry in
> >>         Documentation/devicetree/bindings/arm/rockchip.yaml
> >>
> >> Either you see it as
> >> - a board + hat, using dt overlay and same compatible
> >> - a completely separate board, which needs a separate
> >>   compatible as well
> >>
> >> And as discussed in the previous thread
> >> http://lists.infradead.org/pipermail/linux-rockchip/2019-November/027592.html
> >> but also in Jagan's response that really is somehow a grey area
> >> for something relatively static as the M.2 extension.
> >
> > Sorry for late response on this. I still think that the "overlay would
> > be a better suite" than having separate dts, since it is HAT which is
> > optional to insert and have possibility of having another HAT if it
> > really fit into it.
> >
> > Comments?
> Presently no other extension board does exist, I don't expect one.
>
> I use it with rootfs on NVME on the mezzanine board.
> It is convenient to have the NVME up before going to user space.
>
> The board has SPI-NOR MTD storage to host U-Boot.
> In future U-Boot could boot from NVME directly without needing
> an SD or MMC to host the boot kernel.

This is purely a use-case scenario, I can still use SPI-NOR alone with
final boot via initramfs and use on board storage peripherals for
distributions separately. What I'm saying we can have overlay for
those are optional based on the user instead of making it for
constant.
Jagan Teki Nov. 18, 2019, 12:06 p.m. UTC | #8
On Mon, Nov 18, 2019 at 5:31 PM Heiko Stübner <heiko@sntech.de> wrote:
>
> Am Montag, 18. November 2019, 12:57:16 CET schrieb Markus Reichl:
> > Hi Jagan,
> >
> > Am 18.11.19 um 12:44 schrieb Jagan Teki:
> > > On Mon, Nov 4, 2019 at 5:42 PM Heiko Stübner <heiko@sntech.de> wrote:
> > >>
> > >> Hi Markus,
> > >>
> > >> Am Freitag, 1. November 2019, 17:54:23 CET schrieb Markus Reichl:
> > >> > For rk3399-roc-pc is a mezzanine board available that carries M.2 and
> > >> > POE interfaces. Use it with a separate dts.
> > >> >
> > >> > Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
> > >> > ---
> > >> >  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
> > >> >  .../boot/dts/rockchip/rk3399-roc-pc-mezz.dts  |  52 ++
> > >> >  .../arm64/boot/dts/rockchip/rk3399-roc-pc.dts | 757 +----------------
> > >> >  .../boot/dts/rockchip/rk3399-roc-pc.dtsi      | 767 ++++++++++++++++++
> > >> >  4 files changed, 821 insertions(+), 756 deletions(-)
> > >> >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
> > >> >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
> > >> >
> > >> > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> > >> > index a959434ad46e..80ee9f1fc5f5 100644
> > >> > --- a/arch/arm64/boot/dts/rockchip/Makefile
> > >> > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> > >> > @@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
> > >> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
> > >> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
> > >> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
> > >> > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezz.dtb
> > >> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb
> > >> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
> > >> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
> > >> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
> > >> > new file mode 100644
> > >> > index 000000000000..ee77677d2cf2
> > >> > --- /dev/null
> > >> > +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
> > >> > @@ -0,0 +1,52 @@
> > >> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > >> > +/*
> > >> > + * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
> > >> > + * Copyright (c) 2019 Markus Reichl <m.reichl@fivetechno.de>
> > >> > + */
> > >> > +
> > >> > +/dts-v1/;
> > >> > +#include "rk3399-roc-pc.dtsi"
> > >> > +
> > >> > +/ {
> > >> > +     model = "Firefly ROC-RK3399-PC Mezzanine Board";
> > >> > +     compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
> > >>
> > >> different board with same compatible isn't possible, so
> > >> you'll need a new compatible for it and add a new line to
> > >> the roc-pc entry in
> > >>         Documentation/devicetree/bindings/arm/rockchip.yaml
> > >>
> > >> Either you see it as
> > >> - a board + hat, using dt overlay and same compatible
> > >> - a completely separate board, which needs a separate
> > >>   compatible as well
> > >>
> > >> And as discussed in the previous thread
> > >> http://lists.infradead.org/pipermail/linux-rockchip/2019-November/027592.html
> > >> but also in Jagan's response that really is somehow a grey area
> > >> for something relatively static as the M.2 extension.
> > >
> > > Sorry for late response on this. I still think that the "overlay would
> > > be a better suite" than having separate dts, since it is HAT which is
> > > optional to insert and have possibility of having another HAT if it
> > > really fit into it.
> > >
> > > Comments?
> > Presently no other extension board does exist, I don't expect one.
> >
> > I use it with rootfs on NVME on the mezzanine board.
> > It is convenient to have the NVME up before going to user space.
>
> And that is exactly the reason while I think it's sane to have this
> as a separate board. For more common hats with random
> extended functionality this might be different.
>
> But people attaching the nvme-"hat" will in most all cases do so quite
> permanently as well ;-) .

I did understand this completely and I do agree this point and use-case.

But what if we have overlay, and give tendency to use it at bootloader
level for nvme-"hat" so it can satisfy both common and random HAT
functionalities.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index a959434ad46e..80ee9f1fc5f5 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -28,6 +28,7 @@  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezz.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
new file mode 100644
index 000000000000..ee77677d2cf2
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
@@ -0,0 +1,52 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ * Copyright (c) 2019 Markus Reichl <m.reichl@fivetechno.de>
+ */
+
+/dts-v1/;
+#include "rk3399-roc-pc.dtsi"
+
+/ {
+	model = "Firefly ROC-RK3399-PC Mezzanine Board";
+	compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
+
+	vcc3v3_pcie: vcc3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_pcie_en>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_perst>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	pcie {
+		vcc3v3_pcie_en: vcc3v3-pcie-en {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_perst: pcie-perst {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
index 7e07dae33d0f..cd4195425309 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
@@ -4,764 +4,9 @@ 
  */
 
 /dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
+#include "rk3399-roc-pc.dtsi"
 
 / {
 	model = "Firefly ROC-RK3399-PC Board";
 	compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm0 0 25000 0>;
-	};
-
-	clkin_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "clkin_gmac";
-		#clock-cells = <0>;
-	};
-
-	adc-keys {
-		compatible = "adc-keys";
-		io-channels = <&saradc 1>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1500000>;
-		poll-interval = <100>;
-
-		recovery {
-			label = "Recovery";
-			linux,code = <KEY_VENDOR>;
-			press-threshold-microvolt = <18000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwr_key_l>;
-
-		power {
-			debounce-interval = <100>;
-			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "GPIO Key Power";
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>;
-
-		work-led {
-			label = "green:work";
-			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		diy-led {
-			label = "red:diy";
-			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc1";
-		};
-
-		yellow-led {
-			label = "yellow:yellow-led";
-			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_enable_h>;
-
-		/*
-		 * On the module itself this is one of these (depending
-		 * on the actual card populated):
-		 * - SDIO_RESET_L_WL_REG_ON
-		 * - PDN (power down when low)
-		 */
-		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
-	};
-
-	vcc_vbus_typec0: vcc-vbus-typec0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_vbus_typec0";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	/*
-	 * should be placed inside mp8859, but not until mp8859 has
-	 * its own dt-binding.
-	 */
-	dc_12v: mp8859-dcdc1 {
-		compatible = "regulator-fixed";
-		regulator-name = "dc_12v";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		vin-supply = <&vcc_vbus_typec0>;
-	};
-
-	/* switched by pmic_sleep */
-	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc1v8_s3";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_1v8>;
-	};
-
-	vcc3v3_sys: vcc3v3-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&dc_12v>;
-	};
-
-	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
-	vcc5v0_host: vcc5v0-host-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
-		regulator-name = "vcc5v0_host";
-		regulator-always-on;
-		vin-supply = <&vcc_sys>;
-	};
-
-	vcc_vbus_typec1: vcc-vbus-typec1 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc_vbus_typec1_en>;
-		regulator-name = "vcc_vbus_typec1";
-		regulator-always-on;
-		vin-supply = <&vcc_sys>;
-	};
-
-	vcc_sys: vcc-sys {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc_sys_en>;
-		regulator-name = "vcc_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&dc_12v>;
-	};
-
-	vdd_log: vdd-log {
-		compatible = "pwm-regulator";
-		pwms = <&pwm2 0 25000 1>;
-		regulator-name = "vdd_log";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
-		vin-supply = <&vcc3v3_sys>;
-	};
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
-	status = "okay";
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	assigned-clock-parents = <&clkin_gmac>;
-	clock_in_out = "input";
-	phy-supply = <&vcc_lan>;
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x28>;
-	rx_delay = <0x11>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_cec>;
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <168>;
-	i2c-scl-falling-time-ns = <4>;
-	status = "okay";
-
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		reg = <0x1b>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-		#clock-cells = <1>;
-		clock-output-names = "xin32k", "rk808-clkout2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
-		rockchip,system-power-controller;
-		wakeup-source;
-
-		vcc1-supply = <&vcc3v3_sys>;
-		vcc2-supply = <&vcc3v3_sys>;
-		vcc3-supply = <&vcc3v3_sys>;
-		vcc4-supply = <&vcc3v3_sys>;
-		vcc6-supply = <&vcc3v3_sys>;
-		vcc7-supply = <&vcc3v3_sys>;
-		vcc8-supply = <&vcc3v3_sys>;
-		vcc9-supply = <&vcc3v3_sys>;
-		vcc10-supply = <&vcc3v3_sys>;
-		vcc11-supply = <&vcc3v3_sys>;
-		vcc12-supply = <&vcc3v3_sys>;
-		vcc13-supply = <&vcc3v3_sys>;
-		vcc14-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcc_3v0>;
-
-		regulators {
-			vdd_center: DCDC_REG1 {
-				regulator-name = "vdd_center";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_l: DCDC_REG2 {
-				regulator-name = "vdd_cpu_l";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_1v8: DCDC_REG4 {
-				regulator-name = "vcc_1v8";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcca1v8_codec: LDO_REG1 {
-				regulator-name = "vcca1v8_codec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc1v8_hdmi: LDO_REG2 {
-				regulator-name = "vcc1v8_hdmi";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc1v8_pmu: LDO_REG3 {
-				regulator-name = "vcc1v8_pmu";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc_sdio: LDO_REG4 {
-				regulator-name = "vcc_sdio";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcca3v0_codec: LDO_REG5 {
-				regulator-name = "vcca3v0_codec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v5: LDO_REG6 {
-				regulator-name = "vcc_1v5";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1500000>;
-				};
-			};
-
-			vcca0v9_hdmi: LDO_REG7 {
-				regulator-name = "vcca0v9_hdmi";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <900000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v0: LDO_REG8 {
-				regulator-name = "vcc_3v0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
-				regulator-name = "vcc3v3_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc3v3_s0: SWITCH_REG2 {
-				regulator-name = "vcc3v3_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-
-	vdd_cpu_b: regulator@40 {
-		compatible = "silergy,syr827";
-		reg = <0x40>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_gpio>;
-		regulator-name = "vdd_cpu_b";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc3v3_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_gpu: regulator@41 {
-		compatible = "silergy,syr828";
-		reg = <0x41>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_gpio>;
-		regulator-name = "vdd_gpu";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc3v3_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-};
-
-&i2c1 {
-	i2c-scl-rising-time-ns = <300>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-};
-
-&i2c3 {
-	i2c-scl-rising-time-ns = <450>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-};
-
-&i2c4 {
-	i2c-scl-rising-time-ns = <600>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-
-	fusb1: usb-typec@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&fusb1_int>;
-		vbus-supply = <&vcc_vbus_typec1>;
-		status = "okay";
-	};
-};
-
-&i2c7 {
-	i2c-scl-rising-time-ns = <600>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-
-	fusb0: usb-typec@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&fusb0_int>;
-		vbus-supply = <&vcc_vbus_typec0>;
-		status = "okay";
-	};
-};
-
-&i2s0 {
-	rockchip,playback-channels = <8>;
-	rockchip,capture-channels = <8>;
-	status = "okay";
-};
-
-&i2s1 {
-	rockchip,playback-channels = <2>;
-	rockchip,capture-channels = <2>;
-	status = "okay";
-};
-
-&i2s2 {
-	status = "okay";
-};
-
-&io_domains {
-	audio-supply = <&vcca1v8_codec>;
-	bt656-supply = <&vcc_3v0>;
-	gpio1830-supply = <&vcc_3v0>;
-	sdmmc-supply = <&vcc_sdio>;
-	status = "okay";
-};
-
-&pmu_io_domains {
-	pmu1830-supply = <&vcc_3v0>;
-	status = "okay";
-};
-
-&pinctrl {
-	buttons {
-		pwr_key_l: pwr-key-l {
-			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	lcd-panel {
-		lcd_panel_reset: lcd-panel-reset {
-			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	leds {
-		diy_led_gpio: diy_led-gpio {
-			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		work_led_gpio: work_led-gpio {
-			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		yellow_led_gpio: yellow_led-gpio {
-			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		vsel1_gpio: vsel1-gpio {
-			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-
-		vsel2_gpio: vsel2-gpio {
-			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	sdio-pwrseq {
-		wifi_enable_h: wifi-enable-h {
-			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	usb2 {
-		vcc5v0_host_en: vcc5v0-host-en {
-			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		vcc_sys_en: vcc-sys-en {
-			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		hub_rst: hub-rst {
-			rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
-		};
-	};
-
-	usb-typec {
-		vcc_vbus_typec1_en: vcc-vbus-typec1-en {
-			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	fusb30x {
-		fusb0_int: fusb0-int {
-			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		fusb1_int: fusb1-int {
-			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-};
-
-&pwm0 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&vcca1v8_s3>;
-	status = "okay";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	max-frequency = <150000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
-	status = "okay";
-};
-
-&sdhci {
-	bus-width = <8>;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
-	non-removable;
-	status = "okay";
-};
-
-&tcphy0 {
-	status = "okay";
-};
-
-&tcphy1 {
-	status = "okay";
-};
-
-&tsadc {
-	/* tshut mode 0:CRU 1:GPIO */
-	rockchip,hw-tshut-mode = <1>;
-	/* tshut polarity 0:LOW 1:HIGH */
-	rockchip,hw-tshut-polarity = <1>;
-	status = "okay";
-};
-
-&u2phy0 {
-	status = "okay";
-
-	u2phy0_otg: otg-port {
-		phy-supply = <&vcc_vbus_typec0>;
-		status = "okay";
-	};
-
-	u2phy0_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
-};
-
-&u2phy1 {
-	status = "okay";
-
-	u2phy1_otg: otg-port {
-		phy-supply = <&vcc_vbus_typec1>;
-		status = "okay";
-	};
-
-	u2phy1_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_cts>;
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&usbdrd3_0 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_0 {
-	status = "okay";
-};
-
-&usbdrd3_1 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
new file mode 100644
index 000000000000..7e07dae33d0f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -0,0 +1,767 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Firefly ROC-RK3399-PC Board";
+	compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1500000>;
+		poll-interval = <100>;
+
+		recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key_l>;
+
+		power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>;
+
+		work-led {
+			label = "green:work";
+			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		diy-led {
+			label = "red:diy";
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+
+		yellow-led {
+			label = "yellow:yellow-led";
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_vbus_typec0: vcc-vbus-typec0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_vbus_typec0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	/*
+	 * should be placed inside mp8859, but not until mp8859 has
+	 * its own dt-binding.
+	 */
+	dc_12v: mp8859-dcdc1 {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&vcc_vbus_typec0>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_vbus_typec1: vcc-vbus-typec1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_vbus_typec1_en>;
+		regulator-name = "vcc_vbus_typec1";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_sys_en>;
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		vcc10-supply = <&vcc3v3_sys>;
+		vcc11-supply = <&vcc3v3_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vcc13-supply = <&vcc3v3_sys>;
+		vcc14-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_3v0>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG1 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcc1v8_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcca0v9_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_gpio>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_gpio>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	fusb1: usb-typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb1_int>;
+		vbus-supply = <&vcc_vbus_typec1>;
+		status = "okay";
+	};
+};
+
+&i2c7 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	fusb0: usb-typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int>;
+		vbus-supply = <&vcc_vbus_typec0>;
+		status = "okay";
+	};
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	audio-supply = <&vcca1v8_codec>;
+	bt656-supply = <&vcc_3v0>;
+	gpio1830-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pinctrl {
+	buttons {
+		pwr_key_l: pwr-key-l {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	lcd-panel {
+		lcd_panel_reset: lcd-panel-reset {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		diy_led_gpio: diy_led-gpio {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		work_led_gpio: work_led-gpio {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		yellow_led_gpio: yellow_led-gpio {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		vsel1_gpio: vsel1-gpio {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_gpio: vsel2-gpio {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc_sys_en: vcc-sys-en {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		hub_rst: hub-rst {
+			rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	usb-typec {
+		vcc_vbus_typec1_en: vcc-vbus-typec1-en {
+			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	fusb30x {
+		fusb0_int: fusb0-int {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		fusb1_int: fusb1-int {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		phy-supply = <&vcc_vbus_typec0>;
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		phy-supply = <&vcc_vbus_typec1>;
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};