diff mbox series

dt-bindings: crypto: Convert stm32 QSPI bindings to json-schema

Message ID 20191115142318.2909-1-benjamin.gaignard@st.com (mailing list archive)
State New, archived
Headers show
Series dt-bindings: crypto: Convert stm32 QSPI bindings to json-schema | expand

Commit Message

Benjamin GAIGNARD Nov. 15, 2019, 2:23 p.m. UTC 
Convert the STM32 QSPI binding to DT schema format using json-schema

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
---
 .../devicetree/bindings/spi/spi-stm32-qspi.txt     | 47 -----------
 .../devicetree/bindings/spi/st,stm32-qspi.yaml     | 91 ++++++++++++++++++++++
 2 files changed, 91 insertions(+), 47 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt
 create mode 100644 Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml

Comments

Rob Herring Nov. 20, 2019, 6:04 p.m. UTC | #1 
On Fri, Nov 15, 2019 at 03:23:18PM +0100, Benjamin Gaignard wrote:
> Convert the STM32 QSPI binding to DT schema format using json-schema

Leftover 'crypto' in the subject.

> 
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
> ---
>  .../devicetree/bindings/spi/spi-stm32-qspi.txt     | 47 -----------
>  .../devicetree/bindings/spi/st,stm32-qspi.yaml     | 91 ++++++++++++++++++++++
>  2 files changed, 91 insertions(+), 47 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt
>  create mode 100644 Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml

[...]

> diff --git a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
> new file mode 100644
> index 000000000000..955405d39966
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
> @@ -0,0 +1,91 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spi/st,stm32-qspi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectronics STM32 Quad Serial Peripheral Interface (QSPI) bindings
> +
> +maintainers:
> +  - Christophe Kerello <christophe.kerello@st.com>
> +  - Patrice Chotard <patrice.chotard@st.com>
> +
> +allOf:
> +  - $ref: "spi-controller.yaml#"
> +
> +properties:
> +  compatible:
> +    const: st,stm32f469-qspi
> +
> +  reg:
> +    items:
> +      - description: registers
> +      - description: memory mapping
> +    minItems: 2
> +    maxItems: 2

Implied by the 'items' length.

> +
> +  reg-names:
> +    items:
> +     - const: qspi
> +     - const: qspi_mm
> +    minItems: 2
> +    maxItems: 2

Implied by the 'items' length.

> +
> +  clocks:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +  dmas:
> +    items:
> +      - description: tx DMA channel
> +      - description: rx DMA channel
> +    minItems: 2
> +    maxItems: 2

Implied by the 'items' length.

> +
> +  dma-names:
> +    items:
> +      - const: tx
> +      - const: rx
> +    minItems: 2
> +    maxItems: 2

Implied by the 'items' length.

> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - clocks
> +  - interrupts
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/stm32mp1-clks.h>
> +    #include <dt-bindings/reset/stm32mp1-resets.h>
> +    spi@58003000 {
> +      compatible = "st,stm32f469-qspi";
> +      reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
> +      reg-names = "qspi", "qspi_mm";
> +      interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
> +      dmas = <&mdma1 22 0x10 0x100002 0x0 0x0>,
> +             <&mdma1 22 0x10 0x100008 0x0 0x0>;
> +      dma-names = "tx", "rx";
> +      clocks = <&rcc QSPI_K>;
> +      resets = <&rcc QSPI_R>;
> +
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      flash@0 {
> +        compatible = "jedec,spi-nor";
> +        reg = <0>;
> +        spi-rx-bus-width = <4>;
> +        spi-max-frequency = <108000000>;
> +      };
> +    };
> +
> +...
> -- 
> 2.15.0
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt b/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt
deleted file mode 100644
index bfc038b9478d..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt
+++ /dev/null
@@ -1,47 +0,0 @@ 
-* STMicroelectronics Quad Serial Peripheral Interface(QSPI)
-
-Required properties:
-- compatible: should be "st,stm32f469-qspi"
-- reg: the first contains the register location and length.
-       the second contains the memory mapping address and length
-- reg-names: should contain the reg names "qspi" "qspi_mm"
-- interrupts: should contain the interrupt for the device
-- clocks: the phandle of the clock needed by the QSPI controller
-- A pinctrl must be defined to set pins in mode of operation for QSPI transfer
-
-Optional properties:
-- resets: must contain the phandle to the reset controller.
-
-A spi flash (NOR/NAND) must be a child of spi node and could have some
-properties. Also see jedec,spi-nor.txt.
-
-Required properties:
-- reg: chip-Select number (QSPI controller may connect 2 flashes)
-- spi-max-frequency: max frequency of spi bus
-
-Optional properties:
-- spi-rx-bus-width: see ./spi-bus.txt for the description
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
-Documentation/devicetree/bindings/dma/dma.txt.
-- dma-names: DMA request names should include "tx" and "rx" if present.
-
-Example:
-
-qspi: spi@a0001000 {
-	compatible = "st,stm32f469-qspi";
-	reg = <0xa0001000 0x1000>, <0x90000000 0x10000000>;
-	reg-names = "qspi", "qspi_mm";
-	interrupts = <91>;
-	resets = <&rcc STM32F4_AHB3_RESET(QSPI)>;
-	clocks = <&rcc 0 STM32F4_AHB3_CLOCK(QSPI)>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi0>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-rx-bus-width = <4>;
-		spi-max-frequency = <108000000>;
-		...
-	};
-};
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
new file mode 100644
index 000000000000..955405d39966
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
@@ -0,0 +1,91 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/st,stm32-qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Quad Serial Peripheral Interface (QSPI) bindings
+
+maintainers:
+  - Christophe Kerello <christophe.kerello@st.com>
+  - Patrice Chotard <patrice.chotard@st.com>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+properties:
+  compatible:
+    const: st,stm32f469-qspi
+
+  reg:
+    items:
+      - description: registers
+      - description: memory mapping
+    minItems: 2
+    maxItems: 2
+
+  reg-names:
+    items:
+     - const: qspi
+     - const: qspi_mm
+    minItems: 2
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: tx DMA channel
+      - description: rx DMA channel
+    minItems: 2
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+    minItems: 2
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    spi@58003000 {
+      compatible = "st,stm32f469-qspi";
+      reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+      reg-names = "qspi", "qspi_mm";
+      interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+      dmas = <&mdma1 22 0x10 0x100002 0x0 0x0>,
+             <&mdma1 22 0x10 0x100008 0x0 0x0>;
+      dma-names = "tx", "rx";
+      clocks = <&rcc QSPI_K>;
+      resets = <&rcc QSPI_R>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      flash@0 {
+        compatible = "jedec,spi-nor";
+        reg = <0>;
+        spi-rx-bus-width = <4>;
+        spi-max-frequency = <108000000>;
+      };
+    };
+
+...