new file mode 100644
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/amlogic,meson-mx-sdhc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson SDHC controller Device Tree Bindings
+
+allOf:
+ - $ref: "mmc-controller.yaml"
+
+maintainers:
+ - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+description: |
+ The SDHC MMC host controller on Amlogic SoCs provides an eMMC and MMC
+ card interface with 1/4/8-bit bus width.
+ It supports eMMC spec 4.4x/4.5x including HS200 (up to 100MHz clock).
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - amlogic,meson8-sdhc
+ - amlogic,meson8b-sdhc
+ - amlogic,meson8m2-sdhc
+ - const: amlogic,meson-mx-sdhc
+
+ reg:
+ minItems: 1
+
+ interrupts:
+ minItems: 1
+
+ clocks:
+ minItems: 5
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: clkin0
+ - const: clkin1
+ - const: clkin2
+ - const: clkin3
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ mmc@8e00 {
+ compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+ reg = <0x8e00 0x42>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&sdhc_pclk>, <&xtal>, <&fclk_div4>, <&fclk_div3>, <&fclk_div5>;
+ clock-names = "pclk", "clkin0", "clkin1", "clkin2", "clkin3";
+ };
This documents the devicetree bindings for the SDHC MMC host controller found in Meson6, Meson8, Meson8b and Meson8m2 SoCs. It can use a bus-width of 1/4/8-bit and it supports eMMC spec 4.4x/4.5x including HS200 mode (up to 100MHz clock). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- .../bindings/mmc/amlogic,meson-mx-sdhc.yaml | 64 +++++++++++++++++++ 1 file changed, 64 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml