| Message ID | 1573652826-23987-6-git-send-email-aleksandar.markovic@rt-rk.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | MAINTAINERS: Fine adjustment for (mostly mips) content | expand |
On 11/13/19 2:47 PM, Aleksandar Markovic wrote: > From: Aleksandar Markovic <amarkovic@wavecomp.com> > > Add two files that were recently introduced in a refactoring, > that Malta emulation relies on. They are added by this patch > to Malta section, but they are not added to the general MIPS > section, since they are really not MIPS-specific, and there > may be some non-MIPS hardware using them in future. > > Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> > --- > MAINTAINERS | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/MAINTAINERS b/MAINTAINERS > index ba9ca98..f8a1646 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -959,8 +959,10 @@ M: Philippe Mathieu-Daudé <philmd@redhat.com> > R: Hervé Poussineau <hpoussin@reactos.org> > R: Aurelien Jarno <aurelien@aurel32.net> > S: Maintained > +F: hw/isa/piix4.c Maybe: F: hw/*/piix4.c Or also add: F: hw/acpi/piix4.c > F: hw/mips/mips_malta.c > F: hw/mips/gt64xxx_pci.c > +F: include/hw/southbridge/piix.h > F: tests/acceptance/linux_ssh_mips_malta.py > > Mipssim > Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
On Fri, Nov 22, 2019 at 9:28 PM Philippe Mathieu-Daudé <philmd@redhat.com> wrote: > > On 11/13/19 2:47 PM, Aleksandar Markovic wrote: > > From: Aleksandar Markovic <amarkovic@wavecomp.com> > > > > Add two files that were recently introduced in a refactoring, > > that Malta emulation relies on. They are added by this patch > > to Malta section, but they are not added to the general MIPS > > section, since they are really not MIPS-specific, and there > > may be some non-MIPS hardware using them in future. > > > > Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> > > --- > > MAINTAINERS | 2 ++ > > 1 file changed, 2 insertions(+) > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index ba9ca98..f8a1646 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -959,8 +959,10 @@ M: Philippe Mathieu-Daudé <philmd@redhat.com> > > R: Hervé Poussineau <hpoussin@reactos.org> > > R: Aurelien Jarno <aurelien@aurel32.net> > > S: Maintained > > +F: hw/isa/piix4.c > > Maybe: > > F: hw/*/piix4.c > > Or also add: > > F: hw/acpi/piix4.c > Philippe, are you sure? hw/acpi/piix4.c is used in PC, not in Malta, no? > > F: hw/mips/mips_malta.c > > F: hw/mips/gt64xxx_pci.c > > +F: include/hw/southbridge/piix.h > > F: tests/acceptance/linux_ssh_mips_malta.py > > > > Mipssim > > > > Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> > >
On 11/22/19 9:37 PM, Aleksandar Markovic wrote: > On Fri, Nov 22, 2019 at 9:28 PM Philippe Mathieu-Daudé > <philmd@redhat.com> wrote: >> >> On 11/13/19 2:47 PM, Aleksandar Markovic wrote: >>> From: Aleksandar Markovic <amarkovic@wavecomp.com> >>> >>> Add two files that were recently introduced in a refactoring, >>> that Malta emulation relies on. They are added by this patch >>> to Malta section, but they are not added to the general MIPS >>> section, since they are really not MIPS-specific, and there >>> may be some non-MIPS hardware using them in future. >>> >>> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> >>> --- >>> MAINTAINERS | 2 ++ >>> 1 file changed, 2 insertions(+) >>> >>> diff --git a/MAINTAINERS b/MAINTAINERS >>> index ba9ca98..f8a1646 100644 >>> --- a/MAINTAINERS >>> +++ b/MAINTAINERS >>> @@ -959,8 +959,10 @@ M: Philippe Mathieu-Daudé <philmd@redhat.com> >>> R: Hervé Poussineau <hpoussin@reactos.org> >>> R: Aurelien Jarno <aurelien@aurel32.net> >>> S: Maintained >>> +F: hw/isa/piix4.c >> >> Maybe: >> >> F: hw/*/piix4.c >> >> Or also add: >> >> F: hw/acpi/piix4.c >> > > Philippe, are you sure? hw/acpi/piix4.c is used in PC, not in Malta, no? It is instantiated via: mips_malta_init -> piix4_create -> piix4_pm_init The ACPI block is part of the PIIX4 chipset and should be mapped unconditionally. The Malta indeed uses a PIIX4, which is a PIIX3 extended. The PC uses a Frankenstein PIIX3 with ACPI from PIIX4... I suppose because it started with a PIIX3, then we wanted power saving features but it was too late to switch to the PIIX4, so we abused of the fact than these blocks are exposed internally as PCI devices, so we can overload a PIIX3. See https://www.mail-archive.com/qemu-devel@nongnu.org/msg601512.html FYI I have a patch ready removing the 'if smbus' check in piix4_create(). >>> F: hw/mips/mips_malta.c >>> F: hw/mips/gt64xxx_pci.c >>> +F: include/hw/southbridge/piix.h >>> F: tests/acceptance/linux_ssh_mips_malta.py >>> >>> Mipssim >>> >> >> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> >> >>
On Saturday, November 23, 2019, Philippe Mathieu-Daudé <philmd@redhat.com> wrote: > On 11/22/19 9:37 PM, Aleksandar Markovic wrote: > >> On Fri, Nov 22, 2019 at 9:28 PM Philippe Mathieu-Daudé >> <philmd@redhat.com> wrote: >> >>> >>> On 11/13/19 2:47 PM, Aleksandar Markovic wrote: >>> >>>> From: Aleksandar Markovic <amarkovic@wavecomp.com> >>>> >>>> Add two files that were recently introduced in a refactoring, >>>> that Malta emulation relies on. They are added by this patch >>>> to Malta section, but they are not added to the general MIPS >>>> section, since they are really not MIPS-specific, and there >>>> may be some non-MIPS hardware using them in future. >>>> >>>> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> >>>> --- >>>> MAINTAINERS | 2 ++ >>>> 1 file changed, 2 insertions(+) >>>> >>>> diff --git a/MAINTAINERS b/MAINTAINERS >>>> index ba9ca98..f8a1646 100644 >>>> --- a/MAINTAINERS >>>> +++ b/MAINTAINERS >>>> @@ -959,8 +959,10 @@ M: Philippe Mathieu-Daudé <philmd@redhat.com> >>>> R: Hervé Poussineau <hpoussin@reactos.org> >>>> R: Aurelien Jarno <aurelien@aurel32.net> >>>> S: Maintained >>>> +F: hw/isa/piix4.c >>>> >>> >>> Maybe: >>> >>> F: hw/*/piix4.c >>> >>> Or also add: >>> >>> F: hw/acpi/piix4.c >>> >>> >> Philippe, are you sure? hw/acpi/piix4.c is used in PC, not in Malta, no? >> > > It is instantiated via: > > mips_malta_init -> piix4_create -> piix4_pm_init > > The ACPI block is part of the PIIX4 chipset and should be mapped > unconditionally. > > Philippe, OK, sorry I failed to notice this detail. It just looked odd to me that ACPI and MIPS could be connected, but stranger things happen. I am going to add F: hw/acpi/piix4.c in the next version of this series. Should any change happen in the future, I leave it to you to update the file list, of course. Have a great sunny weekend! Aleksandar > > The Malta indeed uses a PIIX4, which is a PIIX3 extended. > > The PC uses a Frankenstein PIIX3 with ACPI from PIIX4... I suppose because > it started with a PIIX3, then we wanted power saving features but it was > too late to switch to the PIIX4, so we abused of the fact than these blocks > are exposed internally as PCI devices, so we can overload a PIIX3. > > See https://www.mail-archive.com/qemu-devel@nongnu.org/msg601512.html > > > FYI I have a patch ready removing the 'if smbus' check in piix4_create(). > > F: hw/mips/mips_malta.c >>>> F: hw/mips/gt64xxx_pci.c >>>> +F: include/hw/southbridge/piix.h >>>> F: tests/acceptance/linux_ssh_mips_malta.py >>>> >>>> Mipssim >>>> >>>> >>> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> >>> >>> >>> >
diff --git a/MAINTAINERS b/MAINTAINERS index ba9ca98..f8a1646 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -959,8 +959,10 @@ M: Philippe Mathieu-Daudé <philmd@redhat.com> R: Hervé Poussineau <hpoussin@reactos.org> R: Aurelien Jarno <aurelien@aurel32.net> S: Maintained +F: hw/isa/piix4.c F: hw/mips/mips_malta.c F: hw/mips/gt64xxx_pci.c +F: include/hw/southbridge/piix.h F: tests/acceptance/linux_ssh_mips_malta.py Mipssim