diff mbox series

powerpc/devicetrees: Change 'gpios' to 'cs-gpios' on fsl,spi nodes

Message ID 7556683b57d8ce100855857f03d1cd3d2903d045.1574943062.git.christophe.leroy@c-s.fr (mailing list archive)
State Accepted
Commit 8c452a889821ca0cd2a5f2e3e87fbc01e56408cb
Headers show
Series powerpc/devicetrees: Change 'gpios' to 'cs-gpios' on fsl,spi nodes | expand

Commit Message

Christophe Leroy Nov. 28, 2019, 12:16 p.m. UTC
Since commit 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO
descriptors"), the prefered way to define chipselect GPIOs is using
'cs-gpios' property instead of the legacy 'gpios' property.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
 Documentation/devicetree/bindings/spi/fsl-spi.txt | 8 ++++----
 arch/powerpc/boot/dts/mgcoge.dts                  | 2 +-
 arch/powerpc/boot/dts/mpc832x_rdb.dts             | 2 +-
 arch/powerpc/boot/dts/mpc8610_hpcd.dts            | 2 +-
 4 files changed, 7 insertions(+), 7 deletions(-)

Comments

Linus Walleij Nov. 28, 2019, 12:21 p.m. UTC | #1
On Thu, Nov 28, 2019 at 1:16 PM Christophe Leroy
<christophe.leroy@c-s.fr> wrote:

> Since commit 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO
> descriptors"), the prefered way to define chipselect GPIOs is using
> 'cs-gpios' property instead of the legacy 'gpios' property.
>
> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
Rob Herring (Arm) Dec. 13, 2019, 9:34 p.m. UTC | #2
On Thu, Nov 28, 2019 at 12:16:35PM +0000, Christophe Leroy wrote:
> Since commit 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO
> descriptors"), the prefered way to define chipselect GPIOs is using
> 'cs-gpios' property instead of the legacy 'gpios' property.

This will break using a new dtb on a kernel without the above commit. Or 
with any OS that never made the change.

I'm fine with the doc change, but you should keep 'gpios' as deprecated.

> 
> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
> ---
>  Documentation/devicetree/bindings/spi/fsl-spi.txt | 8 ++++----
>  arch/powerpc/boot/dts/mgcoge.dts                  | 2 +-
>  arch/powerpc/boot/dts/mpc832x_rdb.dts             | 2 +-
>  arch/powerpc/boot/dts/mpc8610_hpcd.dts            | 2 +-
>  4 files changed, 7 insertions(+), 7 deletions(-)
Christophe Leroy Dec. 14, 2019, 7:30 a.m. UTC | #3
Le 13/12/2019 à 22:34, Rob Herring a écrit :
> On Thu, Nov 28, 2019 at 12:16:35PM +0000, Christophe Leroy wrote:
>> Since commit 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO
>> descriptors"), the prefered way to define chipselect GPIOs is using
>> 'cs-gpios' property instead of the legacy 'gpios' property.
> 
> This will break using a new dtb on a kernel without the above commit. Or
> with any OS that never made the change.

Why would anybody use a new dtb on an old kernel ? I have not tagged 
this change for stable, it will only apply to DTBs in new kernels, won't 
it ?

That's not the first time DTS have to change for new kernels. For 
instance, some time ago I had to replace all 'gpios' property by a set 
of 'rdy-gpio', 'nce-gpio', 'ale-gpio' and 'cle-gpio' properties to 
continue using 'gpio-control-nand' driver.

> 
> I'm fine with the doc change, but you should keep 'gpios' as deprecated.

Ok

Christophe
Michael Ellerman Jan. 29, 2020, 5:17 a.m. UTC | #4
On Thu, 2019-11-28 at 12:16:35 UTC, Christophe Leroy wrote:
> Since commit 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO
> descriptors"), the prefered way to define chipselect GPIOs is using
> 'cs-gpios' property instead of the legacy 'gpios' property.
> 
> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>

Applied to powerpc next, thanks.

https://git.kernel.org/powerpc/c/8c452a889821ca0cd2a5f2e3e87fbc01e56408cb

cheers
patchwork-bot+linux-spi@kernel.org Feb. 10, 2020, 2:25 p.m. UTC | #5
Hello:

The following patches were marked "accepted", because they were applied to
broonie/spi.git (refs/heads/for-next):

Series: add device tree for SAM9X60 SoC and SAM9X60-EK board
  Submitter: Claudiu Beznea <claudiu.beznea@microchip.com>
  Patchwork: https://patchwork.kernel.org/project/spi-devel-general/list/?series=229897
    Patches: [v5,1/2] dt-bindings: atmel-usart: remove wildcard
             [v5,2/2] dt-bindings: atmel-usart: add microchip,sam9x60-{usart, dbgu}

Patch: powerpc/devicetrees: Change 'gpios' to 'cs-gpios' on fsl,spi nodes
  Submitter: Christophe Leroy <christophe.leroy@c-s.fr>
  Patchwork: https://patchwork.kernel.org/project/spi-devel-general/list/?series=209489

Total patches: 3
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/fsl-spi.txt b/Documentation/devicetree/bindings/spi/fsl-spi.txt
index 411375eac54d..0654380eb751 100644
--- a/Documentation/devicetree/bindings/spi/fsl-spi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-spi.txt
@@ -15,13 +15,13 @@  Required properties:
 - clock-frequency : input clock frequency to non FSL_SOC cores
 
 Optional properties:
-- gpios : specifies the gpio pins to be used for chipselects.
+- cs-gpios : specifies the gpio pins to be used for chipselects.
   The gpios will be referred to as reg = <index> in the SPI child nodes.
   If unspecified, a single SPI device without a chip select can be used.
 - fsl,spisel_boot : for the MPC8306 and MPC8309, specifies that the
   SPISEL_BOOT signal is used as chip select for a slave device. Use
   reg = <number of gpios> in the corresponding child node, i.e. 0 if
-  the gpios property is not present.
+  the cs-gpios property is not present.
 
 Example:
 	spi@4c0 {
@@ -31,8 +31,8 @@  Example:
 		interrupts = <82 0>;
 		interrupt-parent = <700>;
 		mode = "cpu";
-		gpios = <&gpio 18 1	// device reg=<0>
-			 &gpio 19 1>;	// device reg=<1>
+		cs-gpios = <&gpio 18 1		// device reg=<0>
+			    &gpio 19 1>;	// device reg=<1>
 	};
 
 
diff --git a/arch/powerpc/boot/dts/mgcoge.dts b/arch/powerpc/boot/dts/mgcoge.dts
index a2dd5f1da621..7de068991bde 100644
--- a/arch/powerpc/boot/dts/mgcoge.dts
+++ b/arch/powerpc/boot/dts/mgcoge.dts
@@ -224,7 +224,7 @@ 
 				reg = <0x11a80 0x40 0x89fc 0x2>;
 				interrupts = <2 8>;
 				interrupt-parent = <&PIC>;
-				gpios = < &cpm2_pio_d 19 0>;
+				cs-gpios = < &cpm2_pio_d 19 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				ds3106@1 {
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index b6257186528e..ecebc27a2898 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -249,7 +249,7 @@ 
 			reg = <0x4c0 0x40>;
 			interrupts = <2>;
 			interrupt-parent = <&qeic>;
-			gpios = <&qe_pio_d 13 0>;
+			cs-gpios = <&qe_pio_d 13 0>;
 			mode = "cpu-qe";
 
 			mmc-slot@0 {
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 1a8321ac105a..33bbe58c1ad0 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -200,7 +200,7 @@ 
 			interrupts = <59 2>;
 			interrupt-parent = <&mpic>;
 			mode = "cpu";
-			gpios = <&sdcsr_pio 7 0>;
+			cs-gpios = <&sdcsr_pio 7 0>;
 			sleep = <&pmc 0x00000800 0>;
 
 			mmc-slot@0 {