| Message ID | 20191203130916.155779-1-linus.walleij@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/tilcdc: Switch to using GPIO descriptors | expand |
On 12/3/19 7:09 AM, Linus Walleij wrote: > The TI LCDC picks a GPIO line from the device tree to use > for DPMS power on/off. We can switch this to use a GPIO > descriptor pretty easily. Make sure to request the GPIO > "as is" so that the DPMS state that we start (boot) in is > preserved. > > Cc: Jyri Sarha <jsarha@ti.com> > Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> > Cc: David Lechner <david@lechnology.com> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- Reviewed-by: David Lechner <david@lechnology.com>
On 03/12/2019 15:09, Linus Walleij wrote: > The TI LCDC picks a GPIO line from the device tree to use > for DPMS power on/off. We can switch this to use a GPIO > descriptor pretty easily. Make sure to request the GPIO > "as is" so that the DPMS state that we start (boot) in is > preserved. > Hmmm, I have been considering ditching this driver all together since no mainline platform has ever used it. Also, if anybody ever wants to connect tfp410 to tilcdc, he should use drm/bridge/ti-tfp410.c instead. But since the patch is there, maybe I should pick it up, and remove the bundled driver later a bit later. BR, Jyri > Cc: Jyri Sarha <jsarha@ti.com> > Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> > Cc: David Lechner <david@lechnology.com> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > drivers/gpu/drm/tilcdc/tilcdc_tfp410.c | 30 ++++++++++++-------------- > 1 file changed, 14 insertions(+), 16 deletions(-) > > diff --git a/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c b/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c > index 530edb3b51cc..41cd9a7c4316 100644 > --- a/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c > +++ b/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c > @@ -4,9 +4,8 @@ > * Author: Rob Clark <robdclark@gmail.com> > */ > > -#include <linux/gpio.h> > +#include <linux/gpio/consumer.h> > #include <linux/mod_devicetable.h> > -#include <linux/of_gpio.h> > #include <linux/pinctrl/consumer.h> > #include <linux/platform_device.h> > > @@ -21,7 +20,7 @@ > struct tfp410_module { > struct tilcdc_module base; > struct i2c_adapter *i2c; > - int gpio; > + struct gpio_desc *power_gpiod; > }; > #define to_tfp410_module(x) container_of(x, struct tfp410_module, base) > > @@ -58,10 +57,10 @@ static void tfp410_encoder_dpms(struct drm_encoder *encoder, int mode) > > if (mode == DRM_MODE_DPMS_ON) { > DBG("Power on"); > - gpio_direction_output(tfp410_encoder->mod->gpio, 1); > + gpiod_direction_output(tfp410_encoder->mod->power_gpiod, 1); > } else { > DBG("Power off"); > - gpio_direction_output(tfp410_encoder->mod->gpio, 0); > + gpiod_direction_output(tfp410_encoder->mod->power_gpiod, 0); > } > > tfp410_encoder->dpms = mode; > @@ -318,17 +317,17 @@ static int tfp410_probe(struct platform_device *pdev) > > of_node_put(i2c_node); > > - tfp410_mod->gpio = of_get_named_gpio_flags(node, "powerdn-gpio", > - 0, NULL); > - if (tfp410_mod->gpio < 0) { > - dev_warn(&pdev->dev, "No power down GPIO\n"); > - } else { > - ret = gpio_request(tfp410_mod->gpio, "DVI_PDn"); > - if (ret) { > - dev_err(&pdev->dev, "could not get DVI_PDn gpio\n"); > - goto fail_adapter; > - } > + tfp410_mod->power_gpiod = devm_gpiod_get_optional(&pdev->dev, > + "powerdn", > + GPIOD_ASIS); > + if (IS_ERR(tfp410_mod->power_gpiod)) { > + dev_err(&pdev->dev, "could not get DVI_PDn gpio\n"); > + goto fail_adapter; > } > + if (!tfp410_mod->power_gpiod) > + dev_warn(&pdev->dev, "No power down GPIO\n"); > + else > + gpiod_set_consumer_name(tfp410_mod->power_gpiod, "DVI_PDn"); > > return 0; > > @@ -346,7 +345,6 @@ static int tfp410_remove(struct platform_device *pdev) > struct tfp410_module *tfp410_mod = to_tfp410_module(mod); > > i2c_put_adapter(tfp410_mod->i2c); > - gpio_free(tfp410_mod->gpio); > > tilcdc_module_cleanup(mod); > >
Hi Jyri. On Tue, Dec 03, 2019 at 08:29:45PM +0200, Jyri Sarha wrote: > On 03/12/2019 15:09, Linus Walleij wrote: > > The TI LCDC picks a GPIO line from the device tree to use > > for DPMS power on/off. We can switch this to use a GPIO > > descriptor pretty easily. Make sure to request the GPIO > > "as is" so that the DPMS state that we start (boot) in is > > preserved. > > > > Hmmm, I have been considering ditching this driver all together since no > mainline platform has ever used it. Also, if anybody ever wants to > connect tfp410 to tilcdc, he should use drm/bridge/ti-tfp410.c instead. > > But since the patch is there, maybe I should pick it up, and remove the > bundled driver later a bit later. IMO much better to just get rid of it now - as there is anyway no users. No reason to patch code that is essential dead. You just postpone the task for no gain. Sam
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c b/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c index 530edb3b51cc..41cd9a7c4316 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c @@ -4,9 +4,8 @@ * Author: Rob Clark <robdclark@gmail.com> */ -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/mod_devicetable.h> -#include <linux/of_gpio.h> #include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> @@ -21,7 +20,7 @@ struct tfp410_module { struct tilcdc_module base; struct i2c_adapter *i2c; - int gpio; + struct gpio_desc *power_gpiod; }; #define to_tfp410_module(x) container_of(x, struct tfp410_module, base) @@ -58,10 +57,10 @@ static void tfp410_encoder_dpms(struct drm_encoder *encoder, int mode) if (mode == DRM_MODE_DPMS_ON) { DBG("Power on"); - gpio_direction_output(tfp410_encoder->mod->gpio, 1); + gpiod_direction_output(tfp410_encoder->mod->power_gpiod, 1); } else { DBG("Power off"); - gpio_direction_output(tfp410_encoder->mod->gpio, 0); + gpiod_direction_output(tfp410_encoder->mod->power_gpiod, 0); } tfp410_encoder->dpms = mode; @@ -318,17 +317,17 @@ static int tfp410_probe(struct platform_device *pdev) of_node_put(i2c_node); - tfp410_mod->gpio = of_get_named_gpio_flags(node, "powerdn-gpio", - 0, NULL); - if (tfp410_mod->gpio < 0) { - dev_warn(&pdev->dev, "No power down GPIO\n"); - } else { - ret = gpio_request(tfp410_mod->gpio, "DVI_PDn"); - if (ret) { - dev_err(&pdev->dev, "could not get DVI_PDn gpio\n"); - goto fail_adapter; - } + tfp410_mod->power_gpiod = devm_gpiod_get_optional(&pdev->dev, + "powerdn", + GPIOD_ASIS); + if (IS_ERR(tfp410_mod->power_gpiod)) { + dev_err(&pdev->dev, "could not get DVI_PDn gpio\n"); + goto fail_adapter; } + if (!tfp410_mod->power_gpiod) + dev_warn(&pdev->dev, "No power down GPIO\n"); + else + gpiod_set_consumer_name(tfp410_mod->power_gpiod, "DVI_PDn"); return 0; @@ -346,7 +345,6 @@ static int tfp410_remove(struct platform_device *pdev) struct tfp410_module *tfp410_mod = to_tfp410_module(mod); i2c_put_adapter(tfp410_mod->i2c); - gpio_free(tfp410_mod->gpio); tilcdc_module_cleanup(mod);
The TI LCDC picks a GPIO line from the device tree to use for DPMS power on/off. We can switch this to use a GPIO descriptor pretty easily. Make sure to request the GPIO "as is" so that the DPMS state that we start (boot) in is preserved. Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Lechner <david@lechnology.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/gpu/drm/tilcdc/tilcdc_tfp410.c | 30 ++++++++++++-------------- 1 file changed, 14 insertions(+), 16 deletions(-)