diff mbox series

Input: elants_i2c - Add Remark ID check flow in firmware update function

Message ID 003d01d59e9e$8b0a3120$a11e9360$@emc.com.tw (mailing list archive)
State Superseded
Headers show
Series Input: elants_i2c - Add Remark ID check flow in firmware update function | expand

Commit Message

Johnny.Chuang Nov. 19, 2019, 5:59 a.m. UTC
This patch add Remark ID check flow to firmware update function of elan
touchscreen driver.

It avoids firmware update with mismatched Remark ID.

This function is supported by our latest version of boot code, but it
cooperates well with earlier versions.

Our driver will decide if enable Remark ID check with boot code version.

Signed-off-by: Johnny Chuang <johnny.chuang@emc.com.tw>
---
 drivers/input/touchscreen/elants_i2c.c | 108
++++++++++++++++++++++++++++++---
 1 file changed, 100 insertions(+), 8 deletions(-)

 			__func__, (int)cmd_size, cmd);
@@ -556,6 +563,8 @@ static int elants_i2c_initialize(struct elants_data *ts)
 
 	/* hw version is available even if device in recovery state */
 	error2 = elants_i2c_query_hw_version(ts);
+	if (!error2)
+		error2 = elants_i2c_query_bc_version(ts);
 	if (!error)
 		error = error2;
 
@@ -564,8 +573,6 @@ static int elants_i2c_initialize(struct elants_data *ts)
 	if (!error)
 		error = elants_i2c_query_test_version(ts);
 	if (!error)
-		error = elants_i2c_query_bc_version(ts);
-	if (!error)
 		error = elants_i2c_query_ts_info(ts);
 
 	if (error)
@@ -613,39 +620,124 @@ static int elants_i2c_fw_write_page(struct i2c_client
*client,
 	return error;
 }
 
+static int elants_i2c_query_remark_id(struct elants_data *ts) {
+	struct i2c_client *client = ts->client;
+	int error;
+	const u8 cmd[] = { CMD_HEADER_ROM_READ, 0x80, 0x1F, 0x00, 0x00, 0x21
};
+	u8 resp[6] = { 0 };
+
+	error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
+					resp, sizeof(resp));
+	if (error) {
+		dev_err(&client->dev, "get Remark ID failed: %d.\n", error);
+		return error;
+	}
+
+	ts->remark_id = get_unaligned_be16(&resp[3]);
+	dev_info(&client->dev, "remark_id=0x%04x.\n", ts->remark_id);
+
+	return 0;
+}
+
+static int elants_i2c_validate_remark_id(struct elants_data *ts,
+					 const struct firmware *fw)
+{
+	struct i2c_client *client = ts->client;
+	int error;
+	u16 fw_remark_id = 0;
+
+	/* Compare TS Remark ID and FW Remark ID */
+	error = elants_i2c_query_remark_id(ts);
+	if (error) {
+		dev_err(&client->dev, "failed to query Remark ID: %d\n",
error);
+		return error;
+	}
+
+	fw_remark_id = get_unaligned_le16(&fw->data[fw->size - 4]);
+	dev_info(&client->dev, "fw_remark_id=0x%04x.\n", fw_remark_id);
+	if (fw_remark_id != ts->remark_id) {
+		dev_err(&client->dev,
+			"Remark ID Mismatched: ts_remark_id=0x%04x,
fw_remark_id=0x%x.\n",
+			ts->remark_id, fw_remark_id);
+		return -ENODATA;
+	}
+
+	return 0;
+}
+
 static int elants_i2c_do_update_firmware(struct i2c_client *client,
 					 const struct firmware *fw,
 					 bool force)
 {
+	struct elants_data *ts = i2c_get_clientdata(client);
+	static const u8 w_flashkey[] = { 0x54, 0xC0, 0xE1, 0x5A };
 	const u8 enter_iap[] = { 0x45, 0x49, 0x41, 0x50 };
 	const u8 enter_iap2[] = { 0x54, 0x00, 0x12, 0x34 };
 	const u8 iap_ack[] = { 0x55, 0xaa, 0x33, 0xcc };
-	const u8 close_idle[] = {0x54, 0x2c, 0x01, 0x01};
+	const u8 close_idle[] = { 0x54, 0x2c, 0x01, 0x01 };
 	u8 buf[HEADER_SIZE];
 	u16 send_id;
 	int page, n_fw_pages;
 	int error;
+	bool check_remark_id = ts->iap_version >= 0x60;
 
 	/* Recovery mode detection! */
 	if (force) {
 		dev_dbg(&client->dev, "Recovery mode procedure\n");
+
+		if (check_remark_id == true) {
+			/* Validate Remark ID */
+			error = elants_i2c_validate_remark_id(ts, fw);
+			if (error) {
+				dev_err(&client->dev,
+					"failed to validate Remark ID:
%d\n",
+					error);
+				return error;
+			}
+		}
+
+		error = elants_i2c_send(client, w_flashkey,
sizeof(w_flashkey));
+		if (error)
+			dev_err(&client->dev, "failed to write flash key:
%d\n",
+				error);
+
 		error = elants_i2c_send(client, enter_iap2,
sizeof(enter_iap2));
+		if (error) {
+			dev_err(&client->dev, "failed to enter IAP mode:
%d\n",
+				error);
+			return error;
+		}
+		msleep(20);
 	} else {
 		/* Start IAP Procedure */
 		dev_dbg(&client->dev, "Normal IAP procedure\n");
+
 		/* Close idle mode */
 		error = elants_i2c_send(client, close_idle,
sizeof(close_idle));
 		if (error)
 			dev_err(&client->dev, "Failed close idle: %d\n",
error);
 		msleep(60);
+
 		elants_i2c_sw_reset(client);
 		msleep(20);
-		error = elants_i2c_send(client, enter_iap,
sizeof(enter_iap));
-	}
 
-	if (error) {
-		dev_err(&client->dev, "failed to enter IAP mode: %d\n",
error);
-		return error;
+		if (check_remark_id == true) {
+			/* Validate Remark ID */
+			error = elants_i2c_validate_remark_id(ts, fw);
+			if (error) {
+				dev_err(&client->dev, "failed to validate
Remark ID: %d\n",
+					error);
+				return error;
+			}
+		}
+
+		error = elants_i2c_send(client, enter_iap,
sizeof(enter_iap));
+		if (error) {
+			dev_err(&client->dev, "failed to enter IAP mode:
%d\n",
+				error);
+			return error;
+		}
 	}
 
 	msleep(20);
--
2.7.4

Comments

Dmitry Torokhov Dec. 3, 2019, 7:48 p.m. UTC | #1
Hi Johnny,

On Tue, Nov 19, 2019 at 01:59:45PM +0800, Johnny.Chuang wrote:
> This patch add Remark ID check flow to firmware update function of elan
> touchscreen driver.
> 
> It avoids firmware update with mismatched Remark ID.
> 
> This function is supported by our latest version of boot code, but it
> cooperates well with earlier versions.
> 
> Our driver will decide if enable Remark ID check with boot code version.
> 
> Signed-off-by: Johnny Chuang <johnny.chuang@emc.com.tw>
> ---
>  drivers/input/touchscreen/elants_i2c.c | 108
> ++++++++++++++++++++++++++++++---
>  1 file changed, 100 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/elants_i2c.c
> b/drivers/input/touchscreen/elants_i2c.c
> index d4ad24e..9a17af6 100644
> --- a/drivers/input/touchscreen/elants_i2c.c
> +++ b/drivers/input/touchscreen/elants_i2c.c
> @@ -59,8 +59,10 @@
>  #define CMD_HEADER_WRITE	0x54
>  #define CMD_HEADER_READ		0x53
>  #define CMD_HEADER_6B_READ	0x5B
> +#define CMD_HEADER_ROM_READ	0x96
>  #define CMD_HEADER_RESP		0x52
>  #define CMD_HEADER_6B_RESP	0x9B
> +#define CMD_HEADER_ROM_RESP	0x95
>  #define CMD_HEADER_HELLO	0x55
>  #define CMD_HEADER_REK		0x66
>  
> @@ -128,6 +130,7 @@ struct elants_data {
>  	u8 bc_version;
>  	u8 iap_version;
>  	u16 hw_version;
> +	u16 remark_id;

We only use this during firmware version check phase, no need to store
it in the device data structure.

>  	unsigned int x_res;	/* resolution in units/mm */
>  	unsigned int y_res;
>  	unsigned int x_max;
> @@ -200,6 +203,10 @@ static int elants_i2c_execute_command(struct i2c_client
> *client,
>  		expected_response = CMD_HEADER_6B_RESP;
>  		break;
>  
> +	case CMD_HEADER_ROM_READ:
> +		expected_response = CMD_HEADER_ROM_RESP;
> +		break;
> +
>  	default:
>  		dev_err(&client->dev, "%s: invalid command %*ph\n",
>  			__func__, (int)cmd_size, cmd);
> @@ -556,6 +563,8 @@ static int elants_i2c_initialize(struct elants_data *ts)
>  
>  	/* hw version is available even if device in recovery state */
>  	error2 = elants_i2c_query_hw_version(ts);
> +	if (!error2)
> +		error2 = elants_i2c_query_bc_version(ts);

Can you please explain why this change is done? This does not seem to
relate to the "remark id" functionality. Should it be a separate change?

>  	if (!error)
>  		error = error2;
>  
> @@ -564,8 +573,6 @@ static int elants_i2c_initialize(struct elants_data *ts)
>  	if (!error)
>  		error = elants_i2c_query_test_version(ts);
>  	if (!error)
> -		error = elants_i2c_query_bc_version(ts);
> -	if (!error)
>  		error = elants_i2c_query_ts_info(ts);
>  
>  	if (error)
> @@ -613,39 +620,124 @@ static int elants_i2c_fw_write_page(struct i2c_client
> *client,
>  	return error;
>  }
>  
> +static int elants_i2c_query_remark_id(struct elants_data *ts) {
> +	struct i2c_client *client = ts->client;
> +	int error;
> +	const u8 cmd[] = { CMD_HEADER_ROM_READ, 0x80, 0x1F, 0x00, 0x00, 0x21
> };
> +	u8 resp[6] = { 0 };
> +
> +	error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
> +					resp, sizeof(resp));
> +	if (error) {
> +		dev_err(&client->dev, "get Remark ID failed: %d.\n", error);
> +		return error;
> +	}
> +
> +	ts->remark_id = get_unaligned_be16(&resp[3]);
> +	dev_info(&client->dev, "remark_id=0x%04x.\n", ts->remark_id);

I do not think we need be this noisy. Either dev_dbg, or drop it
completely.

> +
> +	return 0;
> +}
> +
> +static int elants_i2c_validate_remark_id(struct elants_data *ts,
> +					 const struct firmware *fw)
> +{
> +	struct i2c_client *client = ts->client;
> +	int error;
> +	u16 fw_remark_id = 0;
> +
> +	/* Compare TS Remark ID and FW Remark ID */
> +	error = elants_i2c_query_remark_id(ts);
> +	if (error) {
> +		dev_err(&client->dev, "failed to query Remark ID: %d\n",
> error);
> +		return error;
> +	}
> +
> +	fw_remark_id = get_unaligned_le16(&fw->data[fw->size - 4]);
> +	dev_info(&client->dev, "fw_remark_id=0x%04x.\n", fw_remark_id);

Please drop this dev_info().

> +	if (fw_remark_id != ts->remark_id) {
> +		dev_err(&client->dev,
> +			"Remark ID Mismatched: ts_remark_id=0x%04x,
> fw_remark_id=0x%x.\n",

You can use "%#04x" to format with prefix.

> +			ts->remark_id, fw_remark_id);
> +		return -ENODATA;

I'd say -EINVAL here.

> +	}
> +
> +	return 0;
> +}
> +
>  static int elants_i2c_do_update_firmware(struct i2c_client *client,
>  					 const struct firmware *fw,
>  					 bool force)
>  {
> +	struct elants_data *ts = i2c_get_clientdata(client);
> +	static const u8 w_flashkey[] = { 0x54, 0xC0, 0xE1, 0x5A };
>  	const u8 enter_iap[] = { 0x45, 0x49, 0x41, 0x50 };
>  	const u8 enter_iap2[] = { 0x54, 0x00, 0x12, 0x34 };
>  	const u8 iap_ack[] = { 0x55, 0xaa, 0x33, 0xcc };
> -	const u8 close_idle[] = {0x54, 0x2c, 0x01, 0x01};
> +	const u8 close_idle[] = { 0x54, 0x2c, 0x01, 0x01 };
>  	u8 buf[HEADER_SIZE];
>  	u16 send_id;
>  	int page, n_fw_pages;
>  	int error;
> +	bool check_remark_id = ts->iap_version >= 0x60;
>  
>  	/* Recovery mode detection! */
>  	if (force) {
>  		dev_dbg(&client->dev, "Recovery mode procedure\n");
> +
> +		if (check_remark_id == true) {

Simply
		if (check_remark_id) {


> +			/* Validate Remark ID */

This comment is not needed, you named the function that you are calling
below well and its name describes what we are trying to do perfectly.

> +			error = elants_i2c_validate_remark_id(ts, fw);
> +			if (error) {
> +				dev_err(&client->dev,
> +					"failed to validate Remark ID:
> %d\n",
> +					error);

elants_i2c_validate_remark_id() already gives necessary diagnostic, this
message is not needed.

> +				return error;
> +			}
> +		}
> +
> +		error = elants_i2c_send(client, w_flashkey,
> sizeof(w_flashkey));
> +		if (error)
> +			dev_err(&client->dev, "failed to write flash key:
> %d\n",
> +				error);

Sending flashkey in this chunk seems to be another change not directly
related to the remark id. Why do we need this? Should it be split out?

> +
>  		error = elants_i2c_send(client, enter_iap2,
> sizeof(enter_iap2));
> +		if (error) {
> +			dev_err(&client->dev, "failed to enter IAP mode:
> %d\n",
> +				error);
> +			return error;
> +		}
> +		msleep(20);

We already have msleep(20) in the common path below, do we really need
2nd one here?

>  	} else {
>  		/* Start IAP Procedure */
>  		dev_dbg(&client->dev, "Normal IAP procedure\n");
> +
>  		/* Close idle mode */
>  		error = elants_i2c_send(client, close_idle,
> sizeof(close_idle));
>  		if (error)
>  			dev_err(&client->dev, "Failed close idle: %d\n",
> error);
>  		msleep(60);
> +
>  		elants_i2c_sw_reset(client);
>  		msleep(20);
> -		error = elants_i2c_send(client, enter_iap,
> sizeof(enter_iap));
> -	}
>  
> -	if (error) {
> -		dev_err(&client->dev, "failed to enter IAP mode: %d\n",
> error);
> -		return error;
> +		if (check_remark_id == true) {

		if (check_remark_id) {

> +			/* Validate Remark ID */

Drop comment.

> +			error = elants_i2c_validate_remark_id(ts, fw);
> +			if (error) {
> +				dev_err(&client->dev, "failed to validate
> Remark ID: %d\n",
> +					error);

Drop message.

> +				return error;
> +			}
> +		}
> +
> +		error = elants_i2c_send(client, enter_iap,
> sizeof(enter_iap));
> +		if (error) {
> +			dev_err(&client->dev, "failed to enter IAP mode:
> %d\n",
> +				error);
> +			return error;
> +		}
>  	}
>  
>  	msleep(20);
> --
> 2.7.4
> 

Thanks.
Johnny.Chuang Dec. 4, 2019, 7:10 a.m. UTC | #2
Hi Dmitry,

I had modified driver and responded you inline.

Many thanks,
Johnny

diff --git a/drivers/input/touchscreen/elants_i2c.c
b/drivers/input/touchscreen/elants_i2c.c
index 9a17af6..4911799 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -130,7 +130,6 @@ struct elants_data {
        u8 bc_version;
        u8 iap_version;
        u16 hw_version;
-       u16 remark_id;
        unsigned int x_res;     /* resolution in units/mm */
        unsigned int y_res;
        unsigned int x_max;
@@ -620,47 +619,33 @@ static int elants_i2c_fw_write_page(struct i2c_client
*client,
        return error;
 }

-static int elants_i2c_query_remark_id(struct elants_data *ts)
-{
-       struct i2c_client *client = ts->client;
-       int error;
-       const u8 cmd[] = { CMD_HEADER_ROM_READ, 0x80, 0x1F, 0x00, 0x00, 0x21
};
-       u8 resp[6] = { 0 };
-
-       error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
-                                       resp, sizeof(resp));
-       if (error) {
-               dev_err(&client->dev, "get Remark ID failed: %d.\n", error);
-               return error;
-       }
-
-       ts->remark_id = get_unaligned_be16(&resp[3]);
-       dev_info(&client->dev, "remark_id=0x%04x.\n", ts->remark_id);
-
-       return 0;
-}
-
 static int elants_i2c_validate_remark_id(struct elants_data *ts,
                                         const struct firmware *fw)
 {
        struct i2c_client *client = ts->client;
        int error;
+       const u8 cmd[] = { CMD_HEADER_ROM_READ, 0x80, 0x1F, 0x00, 0x00, 0x21
};
+       u8 resp[6] = { 0 };
+       u16 ts_remark_id = 0;
        u16 fw_remark_id = 0;

        /* Compare TS Remark ID and FW Remark ID */
-       error = elants_i2c_query_remark_id(ts);
+       error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
+                                       resp, sizeof(resp));
        if (error) {
                dev_err(&client->dev, "failed to query Remark ID: %d\n",
error);
                return error;
        }

+       ts_remark_id = get_unaligned_be16(&resp[3]);
+
        fw_remark_id = get_unaligned_le16(&fw->data[fw->size - 4]);
-       dev_info(&client->dev, "fw_remark_id=0x%04x.\n", fw_remark_id);
-       if (fw_remark_id != ts->remark_id) {
+
+       if (fw_remark_id != ts_remark_id) {
                dev_err(&client->dev,
-                       "Remark ID Mismatched: ts_remark_id=0x%04x,
fw_remark_id=0x%x.\n",
-                       ts->remark_id, fw_remark_id);
-               return -ENODATA;
+                       "Remark ID Mismatched: ts_remark_id=0x%04x,
fw_remark_id=0x%04x.\n",
+                       ts_remark_id, fw_remark_id);
+               return -EINVAL;
        }

        return 0;
@@ -671,7 +656,6 @@ static int elants_i2c_do_update_firmware(struct
i2c_client *client,
                                         bool force)
 {
        struct elants_data *ts = i2c_get_clientdata(client);
-       static const u8 w_flashkey[] = { 0x54, 0xC0, 0xE1, 0x5A };
        const u8 enter_iap[] = { 0x45, 0x49, 0x41, 0x50 };
        const u8 enter_iap2[] = { 0x54, 0x00, 0x12, 0x34 };
        const u8 iap_ack[] = { 0x55, 0xaa, 0x33, 0xcc };
@@ -686,29 +670,18 @@ static int elants_i2c_do_update_firmware(struct
i2c_client *client,
        if (force) {
                dev_dbg(&client->dev, "Recovery mode procedure\n");

-               if (check_remark_id == true) {
-                       /* Validate Remark ID */
+               if (check_remark_id) {
                        error = elants_i2c_validate_remark_id(ts, fw);
-                       if (error) {
-                               dev_err(&client->dev,
-                                       "failed to validate Remark ID:
%d\n",
-                                       error);
+                       if (error)
                                return error;
-                       }
                }

-               error = elants_i2c_send(client, w_flashkey,
sizeof(w_flashkey));
-               if (error)
-                       dev_err(&client->dev, "failed to write flash key:
%d\n",
-                               error);
-
                error = elants_i2c_send(client, enter_iap2,
sizeof(enter_iap2));
                if (error) {
                        dev_err(&client->dev, "failed to enter IAP mode:
%d\n",
                                error);
                        return error;
                }
-               msleep(20);
        } else {
                /* Start IAP Procedure */
                dev_dbg(&client->dev, "Normal IAP procedure\n");
@@ -722,14 +695,10 @@ static int elants_i2c_do_update_firmware(struct
i2c_client *client,
                elants_i2c_sw_reset(client);
                msleep(20);

-               if (check_remark_id == true) {
-                       /* Validate Remark ID */
+               if (check_remark_id) {
                        error = elants_i2c_validate_remark_id(ts, fw);
-                       if (error) {
-                               dev_err(&client->dev, "failed to validate
Remark ID: %d\n",
-                                       error);
+                       if (error)
                                return error;
-                       }
                }

                error = elants_i2c_send(client, enter_iap,
sizeof(enter_iap));

-----Original Message-----
From: 'Dmitry Torokhov' [mailto:dmitry.torokhov@gmail.com] 
Sent: Wednesday, December 04, 2019 3:48 AM
To: Johnny.Chuang
Cc: linux-kernel@vger.kernel.org; linux-input@vger.kernel.org; STRD2-蔡惠嬋;
james.chen@emc.com.tw; '梁博翔'; 'jeff'
Subject: Re: [PATCH] Input: elants_i2c - Add Remark ID check flow in
firmware update function

Hi Johnny,

On Tue, Nov 19, 2019 at 01:59:45PM +0800, Johnny.Chuang wrote:
> This patch add Remark ID check flow to firmware update function of 
> elan touchscreen driver.
> 
> It avoids firmware update with mismatched Remark ID.
> 
> This function is supported by our latest version of boot code, but it 
> cooperates well with earlier versions.
> 
> Our driver will decide if enable Remark ID check with boot code version.
> 
> Signed-off-by: Johnny Chuang <johnny.chuang@emc.com.tw>
> ---
>  drivers/input/touchscreen/elants_i2c.c | 108
> ++++++++++++++++++++++++++++++---
>  1 file changed, 100 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/elants_i2c.c
> b/drivers/input/touchscreen/elants_i2c.c
> index d4ad24e..9a17af6 100644
> --- a/drivers/input/touchscreen/elants_i2c.c
> +++ b/drivers/input/touchscreen/elants_i2c.c
> @@ -59,8 +59,10 @@
>  #define CMD_HEADER_WRITE	0x54
>  #define CMD_HEADER_READ		0x53
>  #define CMD_HEADER_6B_READ	0x5B
> +#define CMD_HEADER_ROM_READ	0x96
>  #define CMD_HEADER_RESP		0x52
>  #define CMD_HEADER_6B_RESP	0x9B
> +#define CMD_HEADER_ROM_RESP	0x95
>  #define CMD_HEADER_HELLO	0x55
>  #define CMD_HEADER_REK		0x66
>  
> @@ -128,6 +130,7 @@ struct elants_data {
>  	u8 bc_version;
>  	u8 iap_version;
>  	u16 hw_version;
> +	u16 remark_id;

We only use this during firmware version check phase, no need to store it in
the device data structure.
[J]: I remove remark_id and move work of elants_i2c_query_remark_id() into
elants_i2c_validate_remark_id().

>  	unsigned int x_res;	/* resolution in units/mm */
>  	unsigned int y_res;
>  	unsigned int x_max;
> @@ -200,6 +203,10 @@ static int elants_i2c_execute_command(struct 
> i2c_client *client,
>  		expected_response = CMD_HEADER_6B_RESP;
>  		break;
>  
> +	case CMD_HEADER_ROM_READ:
> +		expected_response = CMD_HEADER_ROM_RESP;
> +		break;
> +
>  	default:
>  		dev_err(&client->dev, "%s: invalid command %*ph\n",
>  			__func__, (int)cmd_size, cmd);
> @@ -556,6 +563,8 @@ static int elants_i2c_initialize(struct 
> elants_data *ts)
>  
>  	/* hw version is available even if device in recovery state */
>  	error2 = elants_i2c_query_hw_version(ts);
> +	if (!error2)
> +		error2 = elants_i2c_query_bc_version(ts);

Can you please explain why this change is done? This does not seem to relate
to the "remark id" functionality. Should it be a separate change?
[J]: We use ts->iap_version as check_remark_id to run validate remark id
flow or not. Hence we need to get iap_version by elants_i2c_query_bc_version
not only on normal mode but also on recovery mode.

>  	if (!error)
>  		error = error2;
>  
> @@ -564,8 +573,6 @@ static int elants_i2c_initialize(struct elants_data
*ts)
>  	if (!error)
>  		error = elants_i2c_query_test_version(ts);
>  	if (!error)
> -		error = elants_i2c_query_bc_version(ts);
> -	if (!error)
>  		error = elants_i2c_query_ts_info(ts);
>  
>  	if (error)
> @@ -613,39 +620,124 @@ static int elants_i2c_fw_write_page(struct 
> i2c_client *client,
>  	return error;
>  }
>  
> +static int elants_i2c_query_remark_id(struct elants_data *ts) {
> +	struct i2c_client *client = ts->client;
> +	int error;
> +	const u8 cmd[] = { CMD_HEADER_ROM_READ, 0x80, 0x1F, 0x00, 0x00, 0x21
> };
> +	u8 resp[6] = { 0 };
> +
> +	error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
> +					resp, sizeof(resp));
> +	if (error) {
> +		dev_err(&client->dev, "get Remark ID failed: %d.\n", error);
> +		return error;
> +	}
> +
> +	ts->remark_id = get_unaligned_be16(&resp[3]);
> +	dev_info(&client->dev, "remark_id=0x%04x.\n", ts->remark_id);

I do not think we need be this noisy. Either dev_dbg, or drop it completely.
[J]: drop done.

> +
> +	return 0;
> +}
> +
> +static int elants_i2c_validate_remark_id(struct elants_data *ts,
> +					 const struct firmware *fw)
> +{
> +	struct i2c_client *client = ts->client;
> +	int error;
> +	u16 fw_remark_id = 0;
> +
> +	/* Compare TS Remark ID and FW Remark ID */
> +	error = elants_i2c_query_remark_id(ts);
> +	if (error) {
> +		dev_err(&client->dev, "failed to query Remark ID: %d\n",
> error);
> +		return error;
> +	}
> +
> +	fw_remark_id = get_unaligned_le16(&fw->data[fw->size - 4]);
> +	dev_info(&client->dev, "fw_remark_id=0x%04x.\n", fw_remark_id);

Please drop this dev_info().
[J]: drop done.

> +	if (fw_remark_id != ts->remark_id) {
> +		dev_err(&client->dev,
> +			"Remark ID Mismatched: ts_remark_id=0x%04x,
> fw_remark_id=0x%x.\n",

You can use "%#04x" to format with prefix.
[J]: Thanks for your recommendation. I still keep 0x%04x as other in this
driver. I will submit another patch for all prefix change later.

> +			ts->remark_id, fw_remark_id);
> +		return -ENODATA;

I'd say -EINVAL here.
[J]: change done.

> +	}
> +
> +	return 0;
> +}
> +
>  static int elants_i2c_do_update_firmware(struct i2c_client *client,
>  					 const struct firmware *fw,
>  					 bool force)
>  {
> +	struct elants_data *ts = i2c_get_clientdata(client);
> +	static const u8 w_flashkey[] = { 0x54, 0xC0, 0xE1, 0x5A };
>  	const u8 enter_iap[] = { 0x45, 0x49, 0x41, 0x50 };
>  	const u8 enter_iap2[] = { 0x54, 0x00, 0x12, 0x34 };
>  	const u8 iap_ack[] = { 0x55, 0xaa, 0x33, 0xcc };
> -	const u8 close_idle[] = {0x54, 0x2c, 0x01, 0x01};
> +	const u8 close_idle[] = { 0x54, 0x2c, 0x01, 0x01 };
>  	u8 buf[HEADER_SIZE];
>  	u16 send_id;
>  	int page, n_fw_pages;
>  	int error;
> +	bool check_remark_id = ts->iap_version >= 0x60;
>  
>  	/* Recovery mode detection! */
>  	if (force) {
>  		dev_dbg(&client->dev, "Recovery mode procedure\n");
> +
> +		if (check_remark_id == true) {

Simply
		if (check_remark_id) {
[J]: change done.


> +			/* Validate Remark ID */

This comment is not needed, you named the function that you are calling
below well and its name describes what we are trying to do perfectly.
[J]: drop done.

> +			error = elants_i2c_validate_remark_id(ts, fw);
> +			if (error) {
> +				dev_err(&client->dev,
> +					"failed to validate Remark ID:
> %d\n",
> +					error);

elants_i2c_validate_remark_id() already gives necessary diagnostic, this
message is not needed.
[J]: drop done.

> +				return error;
> +			}
> +		}
> +
> +		error = elants_i2c_send(client, w_flashkey,
> sizeof(w_flashkey));
> +		if (error)
> +			dev_err(&client->dev, "failed to write flash key:
> %d\n",
> +				error);

Sending flashkey in this chunk seems to be another change not directly
related to the remark id. Why do we need this? Should it be split out?
[J]: drop done. It's for another change.

> +
>  		error = elants_i2c_send(client, enter_iap2,
sizeof(enter_iap2));
> +		if (error) {
> +			dev_err(&client->dev, "failed to enter IAP mode:
> %d\n",
> +				error);
> +			return error;
> +		}
> +		msleep(20);

We already have msleep(20) in the common path below, do we really need 2nd
one here?
[J]: drop done. It's typo.

>  	} else {
>  		/* Start IAP Procedure */
>  		dev_dbg(&client->dev, "Normal IAP procedure\n");
> +
>  		/* Close idle mode */
>  		error = elants_i2c_send(client, close_idle,
sizeof(close_idle));
>  		if (error)
>  			dev_err(&client->dev, "Failed close idle: %d\n",
error);
>  		msleep(60);
> +
>  		elants_i2c_sw_reset(client);
>  		msleep(20);
> -		error = elants_i2c_send(client, enter_iap,
> sizeof(enter_iap));
> -	}
>  
> -	if (error) {
> -		dev_err(&client->dev, "failed to enter IAP mode: %d\n",
> error);
> -		return error;
> +		if (check_remark_id == true) {

		if (check_remark_id) {

> +			/* Validate Remark ID */

Drop comment.
[J]: drop done.

> +			error = elants_i2c_validate_remark_id(ts, fw);
> +			if (error) {
> +				dev_err(&client->dev, "failed to validate
> Remark ID: %d\n",
> +					error);

Drop message.
[J]: drop done.

> +				return error;
> +			}
> +		}
> +
> +		error = elants_i2c_send(client, enter_iap,
> sizeof(enter_iap));
> +		if (error) {
> +			dev_err(&client->dev, "failed to enter IAP mode:
> %d\n",
> +				error);
> +			return error;
> +		}
>  	}
>  
>  	msleep(20);
> --
> 2.7.4
> 

Thanks.

--
Dmitry
Johnny.Chuang Dec. 10, 2019, 9:29 a.m. UTC | #3
Hi Dmitry,

Please drop this patch.
I modified driver by your recommendation and commit a new patch.

Many thanks,
Johnny
-----Original Message-----
From: Johnny.Chuang [mailto:johnny.chuang@emc.com.tw] 
Sent: Wednesday, December 04, 2019 3:10 PM
To: 'Dmitry Torokhov'
Cc: 'linux-kernel@vger.kernel.org'; 'linux-input@vger.kernel.org'; 'STRD2-蔡
惠嬋'; 'james.chen@emc.com.tw'; '梁博翔'; 'jeff'
Subject: RE: [PATCH] Input: elants_i2c - Add Remark ID check flow in
firmware update function

Hi Dmitry,

I had modified driver and responded you inline.

Many thanks,
Johnny

diff --git a/drivers/input/touchscreen/elants_i2c.c
b/drivers/input/touchscreen/elants_i2c.c
index 9a17af6..4911799 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -130,7 +130,6 @@ struct elants_data {
        u8 bc_version;
        u8 iap_version;
        u16 hw_version;
-       u16 remark_id;
        unsigned int x_res;     /* resolution in units/mm */
        unsigned int y_res;
        unsigned int x_max;
@@ -620,47 +619,33 @@ static int elants_i2c_fw_write_page(struct i2c_client
*client,
        return error;
 }

-static int elants_i2c_query_remark_id(struct elants_data *ts) -{
-       struct i2c_client *client = ts->client;
-       int error;
-       const u8 cmd[] = { CMD_HEADER_ROM_READ, 0x80, 0x1F, 0x00, 0x00, 0x21
};
-       u8 resp[6] = { 0 };
-
-       error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
-                                       resp, sizeof(resp));
-       if (error) {
-               dev_err(&client->dev, "get Remark ID failed: %d.\n", error);
-               return error;
-       }
-
-       ts->remark_id = get_unaligned_be16(&resp[3]);
-       dev_info(&client->dev, "remark_id=0x%04x.\n", ts->remark_id);
-
-       return 0;
-}
-
 static int elants_i2c_validate_remark_id(struct elants_data *ts,
                                         const struct firmware *fw)  {
        struct i2c_client *client = ts->client;
        int error;
+       const u8 cmd[] = { CMD_HEADER_ROM_READ, 0x80, 0x1F, 0x00, 0x00, 0x21
};
+       u8 resp[6] = { 0 };
+       u16 ts_remark_id = 0;
        u16 fw_remark_id = 0;

        /* Compare TS Remark ID and FW Remark ID */
-       error = elants_i2c_query_remark_id(ts);
+       error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
+                                       resp, sizeof(resp));
        if (error) {
                dev_err(&client->dev, "failed to query Remark ID: %d\n",
error);
                return error;
        }

+       ts_remark_id = get_unaligned_be16(&resp[3]);
+
        fw_remark_id = get_unaligned_le16(&fw->data[fw->size - 4]);
-       dev_info(&client->dev, "fw_remark_id=0x%04x.\n", fw_remark_id);
-       if (fw_remark_id != ts->remark_id) {
+
+       if (fw_remark_id != ts_remark_id) {
                dev_err(&client->dev,
-                       "Remark ID Mismatched: ts_remark_id=0x%04x,
fw_remark_id=0x%x.\n",
-                       ts->remark_id, fw_remark_id);
-               return -ENODATA;
+                       "Remark ID Mismatched: ts_remark_id=0x%04x,
fw_remark_id=0x%04x.\n",
+                       ts_remark_id, fw_remark_id);
+               return -EINVAL;
        }

        return 0;
@@ -671,7 +656,6 @@ static int elants_i2c_do_update_firmware(struct
i2c_client *client,
                                         bool force)  {
        struct elants_data *ts = i2c_get_clientdata(client);
-       static const u8 w_flashkey[] = { 0x54, 0xC0, 0xE1, 0x5A };
        const u8 enter_iap[] = { 0x45, 0x49, 0x41, 0x50 };
        const u8 enter_iap2[] = { 0x54, 0x00, 0x12, 0x34 };
        const u8 iap_ack[] = { 0x55, 0xaa, 0x33, 0xcc }; @@ -686,29 +670,18
@@ static int elants_i2c_do_update_firmware(struct i2c_client *client,
        if (force) {
                dev_dbg(&client->dev, "Recovery mode procedure\n");

-               if (check_remark_id == true) {
-                       /* Validate Remark ID */
+               if (check_remark_id) {
                        error = elants_i2c_validate_remark_id(ts, fw);
-                       if (error) {
-                               dev_err(&client->dev,
-                                       "failed to validate Remark ID:
%d\n",
-                                       error);
+                       if (error)
                                return error;
-                       }
                }

-               error = elants_i2c_send(client, w_flashkey,
sizeof(w_flashkey));
-               if (error)
-                       dev_err(&client->dev, "failed to write flash key:
%d\n",
-                               error);
-
                error = elants_i2c_send(client, enter_iap2,
sizeof(enter_iap2));
                if (error) {
                        dev_err(&client->dev, "failed to enter IAP mode:
%d\n",
                                error);
                        return error;
                }
-               msleep(20);
        } else {
                /* Start IAP Procedure */
                dev_dbg(&client->dev, "Normal IAP procedure\n"); @@ -722,14
+695,10 @@ static int elants_i2c_do_update_firmware(struct i2c_client
*client,
                elants_i2c_sw_reset(client);
                msleep(20);

-               if (check_remark_id == true) {
-                       /* Validate Remark ID */
+               if (check_remark_id) {
                        error = elants_i2c_validate_remark_id(ts, fw);
-                       if (error) {
-                               dev_err(&client->dev, "failed to validate
Remark ID: %d\n",
-                                       error);
+                       if (error)
                                return error;
-                       }
                }

                error = elants_i2c_send(client, enter_iap,
sizeof(enter_iap));

-----Original Message-----
From: 'Dmitry Torokhov' [mailto:dmitry.torokhov@gmail.com]
Sent: Wednesday, December 04, 2019 3:48 AM
To: Johnny.Chuang
Cc: linux-kernel@vger.kernel.org; linux-input@vger.kernel.org; STRD2-蔡惠嬋;
james.chen@emc.com.tw; '梁博翔'; 'jeff'
Subject: Re: [PATCH] Input: elants_i2c - Add Remark ID check flow in
firmware update function

Hi Johnny,

On Tue, Nov 19, 2019 at 01:59:45PM +0800, Johnny.Chuang wrote:
> This patch add Remark ID check flow to firmware update function of 
> elan touchscreen driver.
> 
> It avoids firmware update with mismatched Remark ID.
> 
> This function is supported by our latest version of boot code, but it 
> cooperates well with earlier versions.
> 
> Our driver will decide if enable Remark ID check with boot code version.
> 
> Signed-off-by: Johnny Chuang <johnny.chuang@emc.com.tw>
> ---
>  drivers/input/touchscreen/elants_i2c.c | 108
> ++++++++++++++++++++++++++++++---
>  1 file changed, 100 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/elants_i2c.c
> b/drivers/input/touchscreen/elants_i2c.c
> index d4ad24e..9a17af6 100644
> --- a/drivers/input/touchscreen/elants_i2c.c
> +++ b/drivers/input/touchscreen/elants_i2c.c
> @@ -59,8 +59,10 @@
>  #define CMD_HEADER_WRITE	0x54
>  #define CMD_HEADER_READ		0x53
>  #define CMD_HEADER_6B_READ	0x5B
> +#define CMD_HEADER_ROM_READ	0x96
>  #define CMD_HEADER_RESP		0x52
>  #define CMD_HEADER_6B_RESP	0x9B
> +#define CMD_HEADER_ROM_RESP	0x95
>  #define CMD_HEADER_HELLO	0x55
>  #define CMD_HEADER_REK		0x66
>  
> @@ -128,6 +130,7 @@ struct elants_data {
>  	u8 bc_version;
>  	u8 iap_version;
>  	u16 hw_version;
> +	u16 remark_id;

We only use this during firmware version check phase, no need to store it in
the device data structure.
[J]: I remove remark_id and move work of elants_i2c_query_remark_id() into
elants_i2c_validate_remark_id().

>  	unsigned int x_res;	/* resolution in units/mm */
>  	unsigned int y_res;
>  	unsigned int x_max;
> @@ -200,6 +203,10 @@ static int elants_i2c_execute_command(struct 
> i2c_client *client,
>  		expected_response = CMD_HEADER_6B_RESP;
>  		break;
>  
> +	case CMD_HEADER_ROM_READ:
> +		expected_response = CMD_HEADER_ROM_RESP;
> +		break;
> +
>  	default:
>  		dev_err(&client->dev, "%s: invalid command %*ph\n",
>  			__func__, (int)cmd_size, cmd);
> @@ -556,6 +563,8 @@ static int elants_i2c_initialize(struct 
> elants_data *ts)
>  
>  	/* hw version is available even if device in recovery state */
>  	error2 = elants_i2c_query_hw_version(ts);
> +	if (!error2)
> +		error2 = elants_i2c_query_bc_version(ts);

Can you please explain why this change is done? This does not seem to relate
to the "remark id" functionality. Should it be a separate change?
[J]: We use ts->iap_version as check_remark_id to run validate remark id
flow or not. Hence we need to get iap_version by elants_i2c_query_bc_version
not only on normal mode but also on recovery mode.

>  	if (!error)
>  		error = error2;
>  
> @@ -564,8 +573,6 @@ static int elants_i2c_initialize(struct elants_data
*ts)
>  	if (!error)
>  		error = elants_i2c_query_test_version(ts);
>  	if (!error)
> -		error = elants_i2c_query_bc_version(ts);
> -	if (!error)
>  		error = elants_i2c_query_ts_info(ts);
>  
>  	if (error)
> @@ -613,39 +620,124 @@ static int elants_i2c_fw_write_page(struct 
> i2c_client *client,
>  	return error;
>  }
>  
> +static int elants_i2c_query_remark_id(struct elants_data *ts) {
> +	struct i2c_client *client = ts->client;
> +	int error;
> +	const u8 cmd[] = { CMD_HEADER_ROM_READ, 0x80, 0x1F, 0x00, 0x00, 0x21
> };
> +	u8 resp[6] = { 0 };
> +
> +	error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
> +					resp, sizeof(resp));
> +	if (error) {
> +		dev_err(&client->dev, "get Remark ID failed: %d.\n", error);
> +		return error;
> +	}
> +
> +	ts->remark_id = get_unaligned_be16(&resp[3]);
> +	dev_info(&client->dev, "remark_id=0x%04x.\n", ts->remark_id);

I do not think we need be this noisy. Either dev_dbg, or drop it completely.
[J]: drop done.

> +
> +	return 0;
> +}
> +
> +static int elants_i2c_validate_remark_id(struct elants_data *ts,
> +					 const struct firmware *fw)
> +{
> +	struct i2c_client *client = ts->client;
> +	int error;
> +	u16 fw_remark_id = 0;
> +
> +	/* Compare TS Remark ID and FW Remark ID */
> +	error = elants_i2c_query_remark_id(ts);
> +	if (error) {
> +		dev_err(&client->dev, "failed to query Remark ID: %d\n",
> error);
> +		return error;
> +	}
> +
> +	fw_remark_id = get_unaligned_le16(&fw->data[fw->size - 4]);
> +	dev_info(&client->dev, "fw_remark_id=0x%04x.\n", fw_remark_id);

Please drop this dev_info().
[J]: drop done.

> +	if (fw_remark_id != ts->remark_id) {
> +		dev_err(&client->dev,
> +			"Remark ID Mismatched: ts_remark_id=0x%04x,
> fw_remark_id=0x%x.\n",

You can use "%#04x" to format with prefix.
[J]: Thanks for your recommendation. I still keep 0x%04x as other in this
driver. I will submit another patch for all prefix change later.

> +			ts->remark_id, fw_remark_id);
> +		return -ENODATA;

I'd say -EINVAL here.
[J]: change done.

> +	}
> +
> +	return 0;
> +}
> +
>  static int elants_i2c_do_update_firmware(struct i2c_client *client,
>  					 const struct firmware *fw,
>  					 bool force)
>  {
> +	struct elants_data *ts = i2c_get_clientdata(client);
> +	static const u8 w_flashkey[] = { 0x54, 0xC0, 0xE1, 0x5A };
>  	const u8 enter_iap[] = { 0x45, 0x49, 0x41, 0x50 };
>  	const u8 enter_iap2[] = { 0x54, 0x00, 0x12, 0x34 };
>  	const u8 iap_ack[] = { 0x55, 0xaa, 0x33, 0xcc };
> -	const u8 close_idle[] = {0x54, 0x2c, 0x01, 0x01};
> +	const u8 close_idle[] = { 0x54, 0x2c, 0x01, 0x01 };
>  	u8 buf[HEADER_SIZE];
>  	u16 send_id;
>  	int page, n_fw_pages;
>  	int error;
> +	bool check_remark_id = ts->iap_version >= 0x60;
>  
>  	/* Recovery mode detection! */
>  	if (force) {
>  		dev_dbg(&client->dev, "Recovery mode procedure\n");
> +
> +		if (check_remark_id == true) {

Simply
		if (check_remark_id) {
[J]: change done.


> +			/* Validate Remark ID */

This comment is not needed, you named the function that you are calling
below well and its name describes what we are trying to do perfectly.
[J]: drop done.

> +			error = elants_i2c_validate_remark_id(ts, fw);
> +			if (error) {
> +				dev_err(&client->dev,
> +					"failed to validate Remark ID:
> %d\n",
> +					error);

elants_i2c_validate_remark_id() already gives necessary diagnostic, this
message is not needed.
[J]: drop done.

> +				return error;
> +			}
> +		}
> +
> +		error = elants_i2c_send(client, w_flashkey,
> sizeof(w_flashkey));
> +		if (error)
> +			dev_err(&client->dev, "failed to write flash key:
> %d\n",
> +				error);

Sending flashkey in this chunk seems to be another change not directly
related to the remark id. Why do we need this? Should it be split out?
[J]: drop done. It's for another change.

> +
>  		error = elants_i2c_send(client, enter_iap2,
sizeof(enter_iap2));
> +		if (error) {
> +			dev_err(&client->dev, "failed to enter IAP mode:
> %d\n",
> +				error);
> +			return error;
> +		}
> +		msleep(20);

We already have msleep(20) in the common path below, do we really need 2nd
one here?
[J]: drop done. It's typo.

>  	} else {
>  		/* Start IAP Procedure */
>  		dev_dbg(&client->dev, "Normal IAP procedure\n");
> +
>  		/* Close idle mode */
>  		error = elants_i2c_send(client, close_idle,
sizeof(close_idle));
>  		if (error)
>  			dev_err(&client->dev, "Failed close idle: %d\n",
error);
>  		msleep(60);
> +
>  		elants_i2c_sw_reset(client);
>  		msleep(20);
> -		error = elants_i2c_send(client, enter_iap,
> sizeof(enter_iap));
> -	}
>  
> -	if (error) {
> -		dev_err(&client->dev, "failed to enter IAP mode: %d\n",
> error);
> -		return error;
> +		if (check_remark_id == true) {

		if (check_remark_id) {

> +			/* Validate Remark ID */

Drop comment.
[J]: drop done.

> +			error = elants_i2c_validate_remark_id(ts, fw);
> +			if (error) {
> +				dev_err(&client->dev, "failed to validate
> Remark ID: %d\n",
> +					error);

Drop message.
[J]: drop done.

> +				return error;
> +			}
> +		}
> +
> +		error = elants_i2c_send(client, enter_iap,
> sizeof(enter_iap));
> +		if (error) {
> +			dev_err(&client->dev, "failed to enter IAP mode:
> %d\n",
> +				error);
> +			return error;
> +		}
>  	}
>  
>  	msleep(20);
> --
> 2.7.4
> 

Thanks.

--
Dmitry
diff mbox series

Patch

diff --git a/drivers/input/touchscreen/elants_i2c.c
b/drivers/input/touchscreen/elants_i2c.c
index d4ad24e..9a17af6 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -59,8 +59,10 @@ 
 #define CMD_HEADER_WRITE	0x54
 #define CMD_HEADER_READ		0x53
 #define CMD_HEADER_6B_READ	0x5B
+#define CMD_HEADER_ROM_READ	0x96
 #define CMD_HEADER_RESP		0x52
 #define CMD_HEADER_6B_RESP	0x9B
+#define CMD_HEADER_ROM_RESP	0x95
 #define CMD_HEADER_HELLO	0x55
 #define CMD_HEADER_REK		0x66
 
@@ -128,6 +130,7 @@  struct elants_data {
 	u8 bc_version;
 	u8 iap_version;
 	u16 hw_version;
+	u16 remark_id;
 	unsigned int x_res;	/* resolution in units/mm */
 	unsigned int y_res;
 	unsigned int x_max;
@@ -200,6 +203,10 @@  static int elants_i2c_execute_command(struct i2c_client
*client,
 		expected_response = CMD_HEADER_6B_RESP;
 		break;
 
+	case CMD_HEADER_ROM_READ:
+		expected_response = CMD_HEADER_ROM_RESP;
+		break;
+
 	default:
 		dev_err(&client->dev, "%s: invalid command %*ph\n",