diff mbox series

[09/10] tty: serial: samsung_tty: fix up minor comment formatting

Message ID 20191210143706.3928480-9-gregkh@linuxfoundation.org (mailing list archive)
State Not Applicable
Headers show
Series [01/10] tty: serial: samsung: allow driver to be built by anyone | expand

Commit Message

Greg KH Dec. 10, 2019, 2:37 p.m. UTC 
Fix up some minor formatting of comment blocks to make checkpatch
happier and to make things look more uniform.

Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Hyunki Koo <kkoos00@naver.com>
Cc: HYUN-KI KOO <hyunki00.koo@samsung.com>
Cc: Shinbeom Choi <sbeom.choi@samsung.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/samsung_tty.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

Comments

Krzysztof Kozlowski Dec. 10, 2019, 3:14 p.m. UTC | #1 
On Tue, Dec 10, 2019 at 03:37:05PM +0100, Greg Kroah-Hartman wrote:
> Fix up some minor formatting of comment blocks to make checkpatch
> happier and to make things look more uniform.
> 
> Cc: Kukjin Kim <kgene@kernel.org>
> Cc: Krzysztof Kozlowski <krzk@kernel.org>
> Cc: Hyunki Koo <kkoos00@naver.com>
> Cc: HYUN-KI KOO <hyunki00.koo@samsung.com>
> Cc: Shinbeom Choi <sbeom.choi@samsung.com>
> Cc: Jiri Slaby <jslaby@suse.com>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-samsung-soc@vger.kernel.org
> Cc: linux-serial@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>  drivers/tty/serial/samsung_tty.c | 16 +++++++++-------
>  1 file changed, 9 insertions(+), 7 deletions(-)

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
(also if combined with next one)

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 3dfb4f37ec69..4aebed241068 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -4,7 +4,7 @@ 
  *
  * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
-*/
+ */
 
 /* Hote on 2410 error handling
  *
@@ -19,7 +19,7 @@ 
  * and change the policy on BREAK
  *
  * BJD, 04-Nov-2004
-*/
+ */
 
 #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
@@ -838,7 +838,7 @@  static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
 
 	/* if there isn't anything more to transmit, or the uart is now
 	 * stopped, disable the uart and exit
-	*/
+	 */
 
 	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
 		s3c24xx_serial_stop_tx(port);
@@ -1142,7 +1142,8 @@  static int s3c24xx_serial_startup(struct uart_port *port)
 	ourport->tx_claimed = 1;
 
 	/* the port reset code should have done the correct
-	 * register setup for the port controls */
+	 * register setup for the port controls
+	 */
 
 	return ret;
 
@@ -1242,7 +1243,7 @@  static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
  * baud clocks (and the resultant actual baud rates) and then tries to
  * pick the closest one and select that.
  *
-*/
+ */
 
 #define MAX_CLK_NAME_LENGTH 15
 
@@ -1683,7 +1684,7 @@  s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = {
 /* s3c24xx_serial_resetport
  *
  * reset the fifos and other the settings.
-*/
+ */
 
 static void s3c24xx_serial_resetport(struct uart_port *port,
 				   struct s3c2410_uartcfg *cfg)
@@ -1737,7 +1738,8 @@  static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
 
 	if (val == CPUFREQ_PRECHANGE) {
 		/* we should really shut the port down whilst the
-		 * frequency change is in progress. */
+		 * frequency change is in progress.
+		 */
 
 	} else if (val == CPUFREQ_POSTCHANGE) {
 		struct ktermios *termios;