| Message ID | 20191209094332.4047-1-peter.ujfalusi@ti.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | dmaengine/soc: Add Texas Instruments UDMA support | expand |
On 09/12/19 3:13 pm, Peter Ujfalusi wrote: > Hi, > > Vinod, Nishanth, Tero, Santosh: the ti_sci patch in this series was sent > upstream over a month ago: > https://lore.kernel.org/lkml/20191025084715.25098-1-peter.ujfalusi@ti.com/ > > I'm still waiting on it's fate (Tero has given his r-b). > The ti_sci patch did not made it to 5.5-rc1, but I included it in the series and > let the maintainers decide if it can go via DMAengine for 5.6 or to later > releases (5.6 probably for the ti_sci and 5.7 for the UDMA driver patch). Tested this series for sa2ul crypto for AES & 3DES which need the metadata implementation by this series for sa2ul specific functionalities. FWIW: Tested-by: Keerthy <j-keerthy@ti.com> > > Changes since v6: > (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=209455&state=*) > > - UDMAP DMAengine driver: > - Squashed the split patches > - Squashed the early TX completion handling update > (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=210713&state=*) > - Hard reset fix for RX channels to avoid channel lockdown > - Correct completed descriptor's residue value > > Changes since v5: > (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=201051&state=*) > - Based on 5.4 > > - cppi5 header > - clear the bits before setting new value with '|=' > > - UDMAP DT bindings: > - valid compatibles as single enum list > > - UDMAP DMAengine driver: > - Fix udma_is_chan_running() > - Use flags for acc32, burst support instead of a bool in udma_match_data > struct > - TDTYPE handling (teardown completion handling for j721e) is moved to separate > patch as the tisci core patch has not moved for over a month. > Both ti_sci and the iterative patch to udma is included in the series. > > Changes since v4 > (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=196619&state=*) > - Based on 5.4-rc7 > > - ringacc DT bindings: > - clarify the meaning of ti,sci-dev-id > > - ringacc driver: > - Remove 'default y' from Kconfig > - Fix struct comments > - Move try_module_get() earlier in k3_ringacc_request_ring() > > - PSI-L thread database: > - Add kernel style struct/enum documentation > - Add missing thread description for sa2ul second interface > - Change EXPORT_SYMBOL to EXPORT_SYMBOL_GPL > > - UDMAP DT bindings: > - move to dual license > - change compatible from const to enum > - items dropped for ti,sci-rm-ranges-* > - description text moved from literal block when it is sensible > - example fixed to compile cleanly > - added parent to provide correct address-cells > - navss is moved to simple-mfd from simple-bus > > - UDMAP DMAengine driver: > - move fd_ring/r_ring under rflow > - get rid of unused iomem for rflows > - Remove 'default y' from Kconfig > - Use defines for rflow src/dst tag selection > - Merge the udma_ring_callback() and udma_tr_event_callback() to their > corresponding interrupt handler > - Create new defines for tx/rx channel's tisci valid parameter flags > - Remove re-initialization to 0 of tisci request struct members > - Make sure that vchan tasklets are also stopped when removing the module > - Additional checkpatch --strict fixes when it made sense > - make W=1 was clean > > - UDMAP glue layer: > - Remove 'default y' from Kconfig > - commit message update for features needing the glue layer > > Changes since v3 > (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=180679&state=*): > - Based on 5.4-rc5 > - Fixed typos pointed out by Tero > - Added reviewed-by tags from Tero > > - ring accelerator driver > - TODO_GS is removed from the header > - pm_runtime removed as NAVSS and it's components are always on > - Check validity of Message mode setup (element size > 8 bytes must use proxy) > > - cppi5 header > - add commit message > > - UDMAP DT bindings > - Drop the psil-config node use on the remote PSI-L side and use only one cell > which is the remote threadID: > > dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>; > dma-names = "tx", "rx"; > > - The PSI-L thread configuration description is moved to kernel as a new module: > k3-psil/k3-psil-am654/k3-psil-j721e > - ti,psil-base has been removed and moved to kernel > - removed the no longer needed dt-bindings/dma/k3-udma.h > - Convert the document to schema (yaml) > > - NEW PSI-L endpoint configuration database > - a simple database holding the remote end's configuration needed for UDMAP > configuration. All previous parameters from DT has been moved here and merged > with the linux only tr mode channel flag. > - Client drivers can update the remote endpoint configuration as it can be > different based on system configuration and the endpoint itself is under the > control of the peripheral driver. > - database for am654 and j721e > > - UDMAP DMAengine driver > - pm_runtime removed as NAVSS and it's components are always on > - rchan_oes_offset added to MSI dommain allocation > - Use the new PSI-L endpoint database for UDMAP configuration > - Support for waiting for PDMA teardown completion on j721e instead of > returning right away. depends on: > https://lkml.org/lkml/2019/10/25/189 > Not included in this series, but it is in the branch I have prepared. > - psil-base is moved from DT to be part of udma_match_data > - tr_thread maps is removed and using the PSI-L endpoint configuration for it > > - UDMAP glue layer > - pm_runtime removed as NAVSS and it's components are always on > - Use the new PSI-L endpoint database for UDMAP configuration > > Changes since v2 > (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=152609&state=*) > - Based on 5.4-rc1 > - Support for Flow only data transfer for the glue layer > > - cppi5 header > - comments converted to kernel-doc style > - Remove the excessive WARN_ONs and rely on the user for sanity > - new macro for checking TearDown Completion Message > > - ring accelerator driver > - fixed up th commit message (SoB, TI-SCI) > - fixed ring reset > - CONFIG_TI_K3_RINGACC_DEBUG is removed along with the dbg_write/read functions > and use dev_dbg() > - k3_ringacc_ring_dump() is moved to static > - step numbering removed from k3_ringacc_ring_reset_dma() > - Add clarification comment for shared ring usage in k3_ringacc_ring_cfg() > - Magic shift values in k3_ringacc_ring_cfg_proxy() got defined > - K3_RINGACC_RING_MODE_QM is removed as it is not supported > > - UDMAP DT bindings > - Fix property prefixing: s/pdma,/ti,pdma- > - Add ti,notdpkt property to suppress teardown completion message on tchan > - example updated accordingly > > - UDMAP DMAengine driver > - Change __raw_readl/writel to readl/writel > - Split up the udma_tisci_channel_config() into m2m, tx and rx tisci > configuration functions for clarity > - DT bindings change: s/pdma,/ti,pdma- > - Cleanup of udma_tx_status(): > - residue calculation fix for m2m > - no need to read packet counter as it is not used > - peer byte counter only available in PDMAs > - Proper locking to avoid race with interrupt handler (polled m2m fix) > - Support for ti,notdpkt > - RFLOW management rework to support data movement without channel: > - the channel is not controlled by Linux but other core and we only have > rflows and rings to do the DMA transfers. > This mode is only supported by the Glue layer for now. > > - UDMAP glue layer > - Debug print improvements > - Support for rflow/ring only data movement > > Changes since v1 > (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=114105&state=*) > - Added support for j721e > - Based on 5.3-rc2 > - dropped ti_sci API patch for RM management as it is already upstream > - dropped dmadev_get_slave_channel() patch, using __dma_request_channel() > - Added Rob's Reviewed-by to ringacc DT binding document patch > - DT bindings changes: > - linux,udma-mode is gone, I have a simple lookup table in the driver to flag > TR channels. > - Support for j721e > - Fix bug in of_node_put() handling in xlate function > > Changes since RFC (https://patchwork.kernel.org/cover/10612465/): > - Based on linux-next (20190506) which now have the ti_sci interrupt support > - The series can be applied and the UDMA via DMAengine API will be functional > - Included in the series: ti_sci Resource management API, cppi5 header and > driver for the ring accelerator. > - The DMAengine core patches have been updated as per the review comments for > earlier submittion. > - The DMAengine driver patch is artificially split up to 6 smaller patches > > The k3-udma driver implements the Data Movement Architecture described in > AM65x TRM (http://www.ti.com/lit/pdf/spruid7) and > j721e TRM (http://www.ti.com/lit/pdf/spruil1) > > This DMA architecture is a big departure from 'traditional' architecture where > we had either EDMA or sDMA as system DMA. > > Packet DMAs were used as dedicated DMAs to service only networking (Kesytone2) > or USB (am335x) while other peripherals were serviced by EDMA. > > In AM65x/j721e the UDMA (Unified DMA) is used for all data movment within the > SoC, tasked to service all peripherals (UART, McSPI, McASP, networking, etc). > > The NAVSS/UDMA is built around CPPI5 (Communications Port Programming Interface) > and it supports Packet mode (similar to CPPI4.1 in Keystone2 for networking) and > TR mode (similar to EDMA descriptor). > The data movement is done within a PSI-L fabric, peripherals (including the > UDMA-P) are not addressed by their I/O register as with traditional DMAs but > with their PSI-L thread ID. > > In AM65x/j721e we have two main type of peripherals: > Legacy: McASP, McSPI, UART, etc. > to provide connectivity they are serviced by PDMA (Peripheral DMA) > PDMA threads are locked to service a given peripheral, for example PSI-L thread > 0x4400/0xc400 is to service McASP0 rx/tx. > The PDMa configuration can be done via the UDMA Real Time Peer registers. > Native: Networking, security accelerator > these peripherals have native support for PSI-L. > > To be able to use the DMA the following generic steps need to be taken: > - configure a DMA channel (tchan for TX, rchan for RX) > - channel mode: Packet or TR mode > - for memcpy a tchan and rchan pair is used. > - for packet mode RX we also need to configure a receive flow to configure the > packet receiption > - the source and destination threads must be paired > - at minimum one pair of rings need to be configured: > - tx: transfer ring and transfer completion ring > - rx: free descriptor ring and receive ring > - two interrupts: UDMA-P channel interrupt and ring interrupt for tc_ring/r_ring > - If the channel is in packet mode or configured to memcpy then we only need > one interrupt from the ring, events from UDMAP is not used. > > When the channel setup is completed we only interract with the rings: > - TX: push a descriptor to t_ring and wait for it to be pushed to the tc_ring by > the UDMA-P > - RX: push a descriptor to the fd_ring and waith for UDMA-P to push it back to > the r_ring. > > Since we have FIFOs in the DMA fabric (UDMA-P, PSI-L and PDMA) which was not the > case in previous DMAs we need to report the amount of data held in these FIFOs > to clients (delay calculation for ALSA, UART FIFO flush support). > > Metadata support: > DMAengine user driver was posted upstream based/tested on the v1 of the UDMA > series: https://lkml.org/lkml/2019/6/28/20 > SA2UL is using the metadata DMAengine API. > > Note on the last patch: > In Keystone2 the networking had dedicated DMA (packet DMA) which is not the case > anymore and the DMAengine API currently missing support for the features we > would need to support networking, things like > - support for receive descriptor 'classification' > - we need to support several receive queues for a channel. > - the queues are used for packet priority handling for example, but they can be > used to have pools of descriptors for different sizes. > - out of order completion of descriptors on a channel > - when we have several queues to handle different priority packets the > descriptors will be completed 'out-of-order' > - NAPI type of operation (polling instead of interrupt driven transfer) > - without this we can not sustain gigabit speeds and we need to support NAPI > - not to limit this to networking, but other high performance operations > > It is my intention to work on these to be able to remove the 'glue' layer and > switch to DMAengine API - or have an API aside of DMAengine to have generic way > to support networking, but given how controversial and not trivial these changes > are we need something to support networking. > > The series (+DT patches to enabled DMA on AM65x and j721e) on top of 5.5-rc1 is > available: > https://github.com/omap-audio/linux-audio.git peter/udma/series_v7-5.5-rc1 > > Regards, > Peter > --- > Grygorii Strashko (3): > bindings: soc: ti: add documentation for k3 ringacc > soc: ti: k3: add navss ringacc driver > dmaengine: ti: k3-udma: Add glue layer for non DMAengine users > > Peter Ujfalusi (9): > dmaengine: doc: Add sections for per descriptor metadata support > dmaengine: Add metadata_ops for dma_async_tx_descriptor > dmaengine: Add support for reporting DMA cached data amount > dmaengine: ti: Add cppi5 header for K3 NAVSS/UDMA > dmaengine: ti: k3 PSI-L remote endpoint configuration > dt-bindings: dma: ti: Add document for K3 UDMA > dmaengine: ti: New driver for K3 UDMA > firmware: ti_sci: rm: Add support for tx_tdtype parameter for tx > channel > dmaengine: ti: k3-udma: Wait for peer teardown completion if supported > > .../devicetree/bindings/dma/ti/k3-udma.yaml | 185 + > .../devicetree/bindings/soc/ti/k3-ringacc.txt | 59 + > Documentation/driver-api/dmaengine/client.rst | 75 + > .../driver-api/dmaengine/provider.rst | 46 + > drivers/dma/dmaengine.c | 73 + > drivers/dma/dmaengine.h | 8 + > drivers/dma/ti/Kconfig | 24 + > drivers/dma/ti/Makefile | 3 + > drivers/dma/ti/k3-psil-am654.c | 175 + > drivers/dma/ti/k3-psil-j721e.c | 222 ++ > drivers/dma/ti/k3-psil-priv.h | 39 + > drivers/dma/ti/k3-psil.c | 97 + > drivers/dma/ti/k3-udma-glue.c | 1198 ++++++ > drivers/dma/ti/k3-udma-private.c | 133 + > drivers/dma/ti/k3-udma.c | 3452 +++++++++++++++++ > drivers/dma/ti/k3-udma.h | 151 + > drivers/firmware/ti_sci.c | 1 + > drivers/firmware/ti_sci.h | 7 + > drivers/soc/ti/Kconfig | 11 + > drivers/soc/ti/Makefile | 1 + > drivers/soc/ti/k3-ringacc.c | 1180 ++++++ > include/linux/dma/k3-psil.h | 71 + > include/linux/dma/k3-udma-glue.h | 134 + > include/linux/dma/ti-cppi5.h | 1061 +++++ > include/linux/dmaengine.h | 110 + > include/linux/soc/ti/k3-ringacc.h | 244 ++ > include/linux/soc/ti/ti_sci_protocol.h | 2 + > 27 files changed, 8762 insertions(+) > create mode 100644 Documentation/devicetree/bindings/dma/ti/k3-udma.yaml > create mode 100644 Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt > create mode 100644 drivers/dma/ti/k3-psil-am654.c > create mode 100644 drivers/dma/ti/k3-psil-j721e.c > create mode 100644 drivers/dma/ti/k3-psil-priv.h > create mode 100644 drivers/dma/ti/k3-psil.c > create mode 100644 drivers/dma/ti/k3-udma-glue.c > create mode 100644 drivers/dma/ti/k3-udma-private.c > create mode 100644 drivers/dma/ti/k3-udma.c > create mode 100644 drivers/dma/ti/k3-udma.h > create mode 100644 drivers/soc/ti/k3-ringacc.c > create mode 100644 include/linux/dma/k3-psil.h > create mode 100644 include/linux/dma/k3-udma-glue.h > create mode 100644 include/linux/dma/ti-cppi5.h > create mode 100644 include/linux/soc/ti/k3-ringacc.h >
On 09/12/2019 11.43, Peter Ujfalusi wrote: > Hi, > > Vinod, Nishanth, Tero, Santosh: the ti_sci patch in this series was sent > upstream over a month ago: > https://lore.kernel.org/lkml/20191025084715.25098-1-peter.ujfalusi@ti.com/ > > I'm still waiting on it's fate (Tero has given his r-b). > The ti_sci patch did not made it to 5.5-rc1, but I included it in the series and > let the maintainers decide if it can go via DMAengine for 5.6 or to later > releases (5.6 probably for the ti_sci and 5.7 for the UDMA driver patch). > > Changes since v6: > (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=209455&state=*) > > - UDMAP DMAengine driver: > - Squashed the split patches > - Squashed the early TX completion handling update > (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=210713&state=*) > - Hard reset fix for RX channels to avoid channel lockdown > - Correct completed descriptor's residue value I got build failure with allmodconfig: ERROR: "devm_ti_sci_get_of_resource" [drivers/soc/ti/k3-ringacc.ko] undefined! ERROR: "of_msi_get_domain" [drivers/soc/ti/k3-ringacc.ko] undefined! ERROR: "devm_ti_sci_get_of_resource" [drivers/dma/ti/k3-udma.ko] undefined! ERROR: "of_msi_get_domain" [drivers/dma/ti/k3-udma.ko] undefined! They are because both devm_ti_sci_get_of_resource and of_msi_get_domain is missing EXPORT_SYMBOL_GPL(), so they can not be used from modules. There were patches in the past to add it for of_msi_get_domain: https://lore.kernel.org/patchwork/patch/668123/ https://lore.kernel.org/patchwork/patch/716046/ I can not find a reason why these are not merged. Matthias's patch looks to be the earlier one, is it OK if I resend it within v8? > Changes since v5: > (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=201051&state=*) > - Based on 5.4 > > - cppi5 header > - clear the bits before setting new value with '|=' > > - UDMAP DT bindings: > - valid compatibles as single enum list > > - UDMAP DMAengine driver: > - Fix udma_is_chan_running() > - Use flags for acc32, burst support instead of a bool in udma_match_data > struct > - TDTYPE handling (teardown completion handling for j721e) is moved to separate > patch as the tisci core patch has not moved for over a month. > Both ti_sci and the iterative patch to udma is included in the series. > > Changes since v4 > (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=196619&state=*) > - Based on 5.4-rc7 > > - ringacc DT bindings: > - clarify the meaning of ti,sci-dev-id > > - ringacc driver: > - Remove 'default y' from Kconfig > - Fix struct comments > - Move try_module_get() earlier in k3_ringacc_request_ring() > > - PSI-L thread database: > - Add kernel style struct/enum documentation > - Add missing thread description for sa2ul second interface > - Change EXPORT_SYMBOL to EXPORT_SYMBOL_GPL > > - UDMAP DT bindings: > - move to dual license > - change compatible from const to enum > - items dropped for ti,sci-rm-ranges-* > - description text moved from literal block when it is sensible > - example fixed to compile cleanly > - added parent to provide correct address-cells > - navss is moved to simple-mfd from simple-bus > > - UDMAP DMAengine driver: > - move fd_ring/r_ring under rflow > - get rid of unused iomem for rflows > - Remove 'default y' from Kconfig > - Use defines for rflow src/dst tag selection > - Merge the udma_ring_callback() and udma_tr_event_callback() to their > corresponding interrupt handler > - Create new defines for tx/rx channel's tisci valid parameter flags > - Remove re-initialization to 0 of tisci request struct members > - Make sure that vchan tasklets are also stopped when removing the module > - Additional checkpatch --strict fixes when it made sense > - make W=1 was clean > > - UDMAP glue layer: > - Remove 'default y' from Kconfig > - commit message update for features needing the glue layer > > Changes since v3 > (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=180679&state=*): > - Based on 5.4-rc5 > - Fixed typos pointed out by Tero > - Added reviewed-by tags from Tero > > - ring accelerator driver > - TODO_GS is removed from the header > - pm_runtime removed as NAVSS and it's components are always on > - Check validity of Message mode setup (element size > 8 bytes must use proxy) > > - cppi5 header > - add commit message > > - UDMAP DT bindings > - Drop the psil-config node use on the remote PSI-L side and use only one cell > which is the remote threadID: > > dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>; > dma-names = "tx", "rx"; > > - The PSI-L thread configuration description is moved to kernel as a new module: > k3-psil/k3-psil-am654/k3-psil-j721e > - ti,psil-base has been removed and moved to kernel > - removed the no longer needed dt-bindings/dma/k3-udma.h > - Convert the document to schema (yaml) > > - NEW PSI-L endpoint configuration database > - a simple database holding the remote end's configuration needed for UDMAP > configuration. All previous parameters from DT has been moved here and merged > with the linux only tr mode channel flag. > - Client drivers can update the remote endpoint configuration as it can be > different based on system configuration and the endpoint itself is under the > control of the peripheral driver. > - database for am654 and j721e > > - UDMAP DMAengine driver > - pm_runtime removed as NAVSS and it's components are always on > - rchan_oes_offset added to MSI dommain allocation > - Use the new PSI-L endpoint database for UDMAP configuration > - Support for waiting for PDMA teardown completion on j721e instead of > returning right away. depends on: > https://lkml.org/lkml/2019/10/25/189 > Not included in this series, but it is in the branch I have prepared. > - psil-base is moved from DT to be part of udma_match_data > - tr_thread maps is removed and using the PSI-L endpoint configuration for it > > - UDMAP glue layer > - pm_runtime removed as NAVSS and it's components are always on > - Use the new PSI-L endpoint database for UDMAP configuration > > Changes since v2 > (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=152609&state=*) > - Based on 5.4-rc1 > - Support for Flow only data transfer for the glue layer > > - cppi5 header > - comments converted to kernel-doc style > - Remove the excessive WARN_ONs and rely on the user for sanity > - new macro for checking TearDown Completion Message > > - ring accelerator driver > - fixed up th commit message (SoB, TI-SCI) > - fixed ring reset > - CONFIG_TI_K3_RINGACC_DEBUG is removed along with the dbg_write/read functions > and use dev_dbg() > - k3_ringacc_ring_dump() is moved to static > - step numbering removed from k3_ringacc_ring_reset_dma() > - Add clarification comment for shared ring usage in k3_ringacc_ring_cfg() > - Magic shift values in k3_ringacc_ring_cfg_proxy() got defined > - K3_RINGACC_RING_MODE_QM is removed as it is not supported > > - UDMAP DT bindings > - Fix property prefixing: s/pdma,/ti,pdma- > - Add ti,notdpkt property to suppress teardown completion message on tchan > - example updated accordingly > > - UDMAP DMAengine driver > - Change __raw_readl/writel to readl/writel > - Split up the udma_tisci_channel_config() into m2m, tx and rx tisci > configuration functions for clarity > - DT bindings change: s/pdma,/ti,pdma- > - Cleanup of udma_tx_status(): > - residue calculation fix for m2m > - no need to read packet counter as it is not used > - peer byte counter only available in PDMAs > - Proper locking to avoid race with interrupt handler (polled m2m fix) > - Support for ti,notdpkt > - RFLOW management rework to support data movement without channel: > - the channel is not controlled by Linux but other core and we only have > rflows and rings to do the DMA transfers. > This mode is only supported by the Glue layer for now. > > - UDMAP glue layer > - Debug print improvements > - Support for rflow/ring only data movement > > Changes since v1 > (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=114105&state=*) > - Added support for j721e > - Based on 5.3-rc2 > - dropped ti_sci API patch for RM management as it is already upstream > - dropped dmadev_get_slave_channel() patch, using __dma_request_channel() > - Added Rob's Reviewed-by to ringacc DT binding document patch > - DT bindings changes: > - linux,udma-mode is gone, I have a simple lookup table in the driver to flag > TR channels. > - Support for j721e > - Fix bug in of_node_put() handling in xlate function > > Changes since RFC (https://patchwork.kernel.org/cover/10612465/): > - Based on linux-next (20190506) which now have the ti_sci interrupt support > - The series can be applied and the UDMA via DMAengine API will be functional > - Included in the series: ti_sci Resource management API, cppi5 header and > driver for the ring accelerator. > - The DMAengine core patches have been updated as per the review comments for > earlier submittion. > - The DMAengine driver patch is artificially split up to 6 smaller patches > > The k3-udma driver implements the Data Movement Architecture described in > AM65x TRM (http://www.ti.com/lit/pdf/spruid7) and > j721e TRM (http://www.ti.com/lit/pdf/spruil1) > > This DMA architecture is a big departure from 'traditional' architecture where > we had either EDMA or sDMA as system DMA. > > Packet DMAs were used as dedicated DMAs to service only networking (Kesytone2) > or USB (am335x) while other peripherals were serviced by EDMA. > > In AM65x/j721e the UDMA (Unified DMA) is used for all data movment within the > SoC, tasked to service all peripherals (UART, McSPI, McASP, networking, etc). > > The NAVSS/UDMA is built around CPPI5 (Communications Port Programming Interface) > and it supports Packet mode (similar to CPPI4.1 in Keystone2 for networking) and > TR mode (similar to EDMA descriptor). > The data movement is done within a PSI-L fabric, peripherals (including the > UDMA-P) are not addressed by their I/O register as with traditional DMAs but > with their PSI-L thread ID. > > In AM65x/j721e we have two main type of peripherals: > Legacy: McASP, McSPI, UART, etc. > to provide connectivity they are serviced by PDMA (Peripheral DMA) > PDMA threads are locked to service a given peripheral, for example PSI-L thread > 0x4400/0xc400 is to service McASP0 rx/tx. > The PDMa configuration can be done via the UDMA Real Time Peer registers. > Native: Networking, security accelerator > these peripherals have native support for PSI-L. > > To be able to use the DMA the following generic steps need to be taken: > - configure a DMA channel (tchan for TX, rchan for RX) > - channel mode: Packet or TR mode > - for memcpy a tchan and rchan pair is used. > - for packet mode RX we also need to configure a receive flow to configure the > packet receiption > - the source and destination threads must be paired > - at minimum one pair of rings need to be configured: > - tx: transfer ring and transfer completion ring > - rx: free descriptor ring and receive ring > - two interrupts: UDMA-P channel interrupt and ring interrupt for tc_ring/r_ring > - If the channel is in packet mode or configured to memcpy then we only need > one interrupt from the ring, events from UDMAP is not used. > > When the channel setup is completed we only interract with the rings: > - TX: push a descriptor to t_ring and wait for it to be pushed to the tc_ring by > the UDMA-P > - RX: push a descriptor to the fd_ring and waith for UDMA-P to push it back to > the r_ring. > > Since we have FIFOs in the DMA fabric (UDMA-P, PSI-L and PDMA) which was not the > case in previous DMAs we need to report the amount of data held in these FIFOs > to clients (delay calculation for ALSA, UART FIFO flush support). > > Metadata support: > DMAengine user driver was posted upstream based/tested on the v1 of the UDMA > series: https://lkml.org/lkml/2019/6/28/20 > SA2UL is using the metadata DMAengine API. > > Note on the last patch: > In Keystone2 the networking had dedicated DMA (packet DMA) which is not the case > anymore and the DMAengine API currently missing support for the features we > would need to support networking, things like > - support for receive descriptor 'classification' > - we need to support several receive queues for a channel. > - the queues are used for packet priority handling for example, but they can be > used to have pools of descriptors for different sizes. > - out of order completion of descriptors on a channel > - when we have several queues to handle different priority packets the > descriptors will be completed 'out-of-order' > - NAPI type of operation (polling instead of interrupt driven transfer) > - without this we can not sustain gigabit speeds and we need to support NAPI > - not to limit this to networking, but other high performance operations > > It is my intention to work on these to be able to remove the 'glue' layer and > switch to DMAengine API - or have an API aside of DMAengine to have generic way > to support networking, but given how controversial and not trivial these changes > are we need something to support networking. > > The series (+DT patches to enabled DMA on AM65x and j721e) on top of 5.5-rc1 is > available: > https://github.com/omap-audio/linux-audio.git peter/udma/series_v7-5.5-rc1 > > Regards, > Peter > --- > Grygorii Strashko (3): > bindings: soc: ti: add documentation for k3 ringacc > soc: ti: k3: add navss ringacc driver > dmaengine: ti: k3-udma: Add glue layer for non DMAengine users > > Peter Ujfalusi (9): > dmaengine: doc: Add sections for per descriptor metadata support > dmaengine: Add metadata_ops for dma_async_tx_descriptor > dmaengine: Add support for reporting DMA cached data amount > dmaengine: ti: Add cppi5 header for K3 NAVSS/UDMA > dmaengine: ti: k3 PSI-L remote endpoint configuration > dt-bindings: dma: ti: Add document for K3 UDMA > dmaengine: ti: New driver for K3 UDMA > firmware: ti_sci: rm: Add support for tx_tdtype parameter for tx > channel > dmaengine: ti: k3-udma: Wait for peer teardown completion if supported > > .../devicetree/bindings/dma/ti/k3-udma.yaml | 185 + > .../devicetree/bindings/soc/ti/k3-ringacc.txt | 59 + > Documentation/driver-api/dmaengine/client.rst | 75 + > .../driver-api/dmaengine/provider.rst | 46 + > drivers/dma/dmaengine.c | 73 + > drivers/dma/dmaengine.h | 8 + > drivers/dma/ti/Kconfig | 24 + > drivers/dma/ti/Makefile | 3 + > drivers/dma/ti/k3-psil-am654.c | 175 + > drivers/dma/ti/k3-psil-j721e.c | 222 ++ > drivers/dma/ti/k3-psil-priv.h | 39 + > drivers/dma/ti/k3-psil.c | 97 + > drivers/dma/ti/k3-udma-glue.c | 1198 ++++++ > drivers/dma/ti/k3-udma-private.c | 133 + > drivers/dma/ti/k3-udma.c | 3452 +++++++++++++++++ > drivers/dma/ti/k3-udma.h | 151 + > drivers/firmware/ti_sci.c | 1 + > drivers/firmware/ti_sci.h | 7 + > drivers/soc/ti/Kconfig | 11 + > drivers/soc/ti/Makefile | 1 + > drivers/soc/ti/k3-ringacc.c | 1180 ++++++ > include/linux/dma/k3-psil.h | 71 + > include/linux/dma/k3-udma-glue.h | 134 + > include/linux/dma/ti-cppi5.h | 1061 +++++ > include/linux/dmaengine.h | 110 + > include/linux/soc/ti/k3-ringacc.h | 244 ++ > include/linux/soc/ti/ti_sci_protocol.h | 2 + > 27 files changed, 8762 insertions(+) > create mode 100644 Documentation/devicetree/bindings/dma/ti/k3-udma.yaml > create mode 100644 Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt > create mode 100644 drivers/dma/ti/k3-psil-am654.c > create mode 100644 drivers/dma/ti/k3-psil-j721e.c > create mode 100644 drivers/dma/ti/k3-psil-priv.h > create mode 100644 drivers/dma/ti/k3-psil.c > create mode 100644 drivers/dma/ti/k3-udma-glue.c > create mode 100644 drivers/dma/ti/k3-udma-private.c > create mode 100644 drivers/dma/ti/k3-udma.c > create mode 100644 drivers/dma/ti/k3-udma.h > create mode 100644 drivers/soc/ti/k3-ringacc.c > create mode 100644 include/linux/dma/k3-psil.h > create mode 100644 include/linux/dma/k3-udma-glue.h > create mode 100644 include/linux/dma/ti-cppi5.h > create mode 100644 include/linux/soc/ti/k3-ringacc.h > - Péter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
On 12/12/2019 10:46, Peter Ujfalusi wrote: > > > On 09/12/2019 11.43, Peter Ujfalusi wrote: >> Hi, >> >> Vinod, Nishanth, Tero, Santosh: the ti_sci patch in this series was sent >> upstream over a month ago: >> https://lore.kernel.org/lkml/20191025084715.25098-1-peter.ujfalusi@ti.com/ >> >> I'm still waiting on it's fate (Tero has given his r-b). >> The ti_sci patch did not made it to 5.5-rc1, but I included it in the series and >> let the maintainers decide if it can go via DMAengine for 5.6 or to later >> releases (5.6 probably for the ti_sci and 5.7 for the UDMA driver patch). >> >> Changes since v6: >> (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=209455&state=*) >> >> - UDMAP DMAengine driver: >> - Squashed the split patches >> - Squashed the early TX completion handling update >> (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=210713&state=*) >> - Hard reset fix for RX channels to avoid channel lockdown >> - Correct completed descriptor's residue value > > I got build failure with allmodconfig: > > ERROR: "devm_ti_sci_get_of_resource" [drivers/soc/ti/k3-ringacc.ko] > undefined! > ERROR: "of_msi_get_domain" [drivers/soc/ti/k3-ringacc.ko] undefined! > ERROR: "devm_ti_sci_get_of_resource" [drivers/dma/ti/k3-udma.ko] undefined! > ERROR: "of_msi_get_domain" [drivers/dma/ti/k3-udma.ko] undefined! > > They are because both devm_ti_sci_get_of_resource and of_msi_get_domain > is missing EXPORT_SYMBOL_GPL(), so they can not be used from modules. > > There were patches in the past to add it for of_msi_get_domain: > https://lore.kernel.org/patchwork/patch/668123/ > https://lore.kernel.org/patchwork/patch/716046/ > > I can not find a reason why these are not merged. > Matthias's patch looks to be the earlier one, is it OK if I resend it > within v8? You can just send those two patches separately, I can apply them first before this series. No need to resend this series. -Tero > >> Changes since v5: >> (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=201051&state=*) >> - Based on 5.4 >> >> - cppi5 header >> - clear the bits before setting new value with '|=' >> >> - UDMAP DT bindings: >> - valid compatibles as single enum list >> >> - UDMAP DMAengine driver: >> - Fix udma_is_chan_running() >> - Use flags for acc32, burst support instead of a bool in udma_match_data >> struct >> - TDTYPE handling (teardown completion handling for j721e) is moved to separate >> patch as the tisci core patch has not moved for over a month. >> Both ti_sci and the iterative patch to udma is included in the series. >> >> Changes since v4 >> (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=196619&state=*) >> - Based on 5.4-rc7 >> >> - ringacc DT bindings: >> - clarify the meaning of ti,sci-dev-id >> >> - ringacc driver: >> - Remove 'default y' from Kconfig >> - Fix struct comments >> - Move try_module_get() earlier in k3_ringacc_request_ring() >> >> - PSI-L thread database: >> - Add kernel style struct/enum documentation >> - Add missing thread description for sa2ul second interface >> - Change EXPORT_SYMBOL to EXPORT_SYMBOL_GPL >> >> - UDMAP DT bindings: >> - move to dual license >> - change compatible from const to enum >> - items dropped for ti,sci-rm-ranges-* >> - description text moved from literal block when it is sensible >> - example fixed to compile cleanly >> - added parent to provide correct address-cells >> - navss is moved to simple-mfd from simple-bus >> >> - UDMAP DMAengine driver: >> - move fd_ring/r_ring under rflow >> - get rid of unused iomem for rflows >> - Remove 'default y' from Kconfig >> - Use defines for rflow src/dst tag selection >> - Merge the udma_ring_callback() and udma_tr_event_callback() to their >> corresponding interrupt handler >> - Create new defines for tx/rx channel's tisci valid parameter flags >> - Remove re-initialization to 0 of tisci request struct members >> - Make sure that vchan tasklets are also stopped when removing the module >> - Additional checkpatch --strict fixes when it made sense >> - make W=1 was clean >> >> - UDMAP glue layer: >> - Remove 'default y' from Kconfig >> - commit message update for features needing the glue layer >> >> Changes since v3 >> (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=180679&state=*): >> - Based on 5.4-rc5 >> - Fixed typos pointed out by Tero >> - Added reviewed-by tags from Tero >> >> - ring accelerator driver >> - TODO_GS is removed from the header >> - pm_runtime removed as NAVSS and it's components are always on >> - Check validity of Message mode setup (element size > 8 bytes must use proxy) >> >> - cppi5 header >> - add commit message >> >> - UDMAP DT bindings >> - Drop the psil-config node use on the remote PSI-L side and use only one cell >> which is the remote threadID: >> >> dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>; >> dma-names = "tx", "rx"; >> >> - The PSI-L thread configuration description is moved to kernel as a new module: >> k3-psil/k3-psil-am654/k3-psil-j721e >> - ti,psil-base has been removed and moved to kernel >> - removed the no longer needed dt-bindings/dma/k3-udma.h >> - Convert the document to schema (yaml) >> >> - NEW PSI-L endpoint configuration database >> - a simple database holding the remote end's configuration needed for UDMAP >> configuration. All previous parameters from DT has been moved here and merged >> with the linux only tr mode channel flag. >> - Client drivers can update the remote endpoint configuration as it can be >> different based on system configuration and the endpoint itself is under the >> control of the peripheral driver. >> - database for am654 and j721e >> >> - UDMAP DMAengine driver >> - pm_runtime removed as NAVSS and it's components are always on >> - rchan_oes_offset added to MSI dommain allocation >> - Use the new PSI-L endpoint database for UDMAP configuration >> - Support for waiting for PDMA teardown completion on j721e instead of >> returning right away. depends on: >> https://lkml.org/lkml/2019/10/25/189 >> Not included in this series, but it is in the branch I have prepared. >> - psil-base is moved from DT to be part of udma_match_data >> - tr_thread maps is removed and using the PSI-L endpoint configuration for it >> >> - UDMAP glue layer >> - pm_runtime removed as NAVSS and it's components are always on >> - Use the new PSI-L endpoint database for UDMAP configuration >> >> Changes since v2 >> (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=152609&state=*) >> - Based on 5.4-rc1 >> - Support for Flow only data transfer for the glue layer >> >> - cppi5 header >> - comments converted to kernel-doc style >> - Remove the excessive WARN_ONs and rely on the user for sanity >> - new macro for checking TearDown Completion Message >> >> - ring accelerator driver >> - fixed up th commit message (SoB, TI-SCI) >> - fixed ring reset >> - CONFIG_TI_K3_RINGACC_DEBUG is removed along with the dbg_write/read functions >> and use dev_dbg() >> - k3_ringacc_ring_dump() is moved to static >> - step numbering removed from k3_ringacc_ring_reset_dma() >> - Add clarification comment for shared ring usage in k3_ringacc_ring_cfg() >> - Magic shift values in k3_ringacc_ring_cfg_proxy() got defined >> - K3_RINGACC_RING_MODE_QM is removed as it is not supported >> >> - UDMAP DT bindings >> - Fix property prefixing: s/pdma,/ti,pdma- >> - Add ti,notdpkt property to suppress teardown completion message on tchan >> - example updated accordingly >> >> - UDMAP DMAengine driver >> - Change __raw_readl/writel to readl/writel >> - Split up the udma_tisci_channel_config() into m2m, tx and rx tisci >> configuration functions for clarity >> - DT bindings change: s/pdma,/ti,pdma- >> - Cleanup of udma_tx_status(): >> - residue calculation fix for m2m >> - no need to read packet counter as it is not used >> - peer byte counter only available in PDMAs >> - Proper locking to avoid race with interrupt handler (polled m2m fix) >> - Support for ti,notdpkt >> - RFLOW management rework to support data movement without channel: >> - the channel is not controlled by Linux but other core and we only have >> rflows and rings to do the DMA transfers. >> This mode is only supported by the Glue layer for now. >> >> - UDMAP glue layer >> - Debug print improvements >> - Support for rflow/ring only data movement >> >> Changes since v1 >> (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=114105&state=*) >> - Added support for j721e >> - Based on 5.3-rc2 >> - dropped ti_sci API patch for RM management as it is already upstream >> - dropped dmadev_get_slave_channel() patch, using __dma_request_channel() >> - Added Rob's Reviewed-by to ringacc DT binding document patch >> - DT bindings changes: >> - linux,udma-mode is gone, I have a simple lookup table in the driver to flag >> TR channels. >> - Support for j721e >> - Fix bug in of_node_put() handling in xlate function >> >> Changes since RFC (https://patchwork.kernel.org/cover/10612465/): >> - Based on linux-next (20190506) which now have the ti_sci interrupt support >> - The series can be applied and the UDMA via DMAengine API will be functional >> - Included in the series: ti_sci Resource management API, cppi5 header and >> driver for the ring accelerator. >> - The DMAengine core patches have been updated as per the review comments for >> earlier submittion. >> - The DMAengine driver patch is artificially split up to 6 smaller patches >> >> The k3-udma driver implements the Data Movement Architecture described in >> AM65x TRM (http://www.ti.com/lit/pdf/spruid7) and >> j721e TRM (http://www.ti.com/lit/pdf/spruil1) >> >> This DMA architecture is a big departure from 'traditional' architecture where >> we had either EDMA or sDMA as system DMA. >> >> Packet DMAs were used as dedicated DMAs to service only networking (Kesytone2) >> or USB (am335x) while other peripherals were serviced by EDMA. >> >> In AM65x/j721e the UDMA (Unified DMA) is used for all data movment within the >> SoC, tasked to service all peripherals (UART, McSPI, McASP, networking, etc). >> >> The NAVSS/UDMA is built around CPPI5 (Communications Port Programming Interface) >> and it supports Packet mode (similar to CPPI4.1 in Keystone2 for networking) and >> TR mode (similar to EDMA descriptor). >> The data movement is done within a PSI-L fabric, peripherals (including the >> UDMA-P) are not addressed by their I/O register as with traditional DMAs but >> with their PSI-L thread ID. >> >> In AM65x/j721e we have two main type of peripherals: >> Legacy: McASP, McSPI, UART, etc. >> to provide connectivity they are serviced by PDMA (Peripheral DMA) >> PDMA threads are locked to service a given peripheral, for example PSI-L thread >> 0x4400/0xc400 is to service McASP0 rx/tx. >> The PDMa configuration can be done via the UDMA Real Time Peer registers. >> Native: Networking, security accelerator >> these peripherals have native support for PSI-L. >> >> To be able to use the DMA the following generic steps need to be taken: >> - configure a DMA channel (tchan for TX, rchan for RX) >> - channel mode: Packet or TR mode >> - for memcpy a tchan and rchan pair is used. >> - for packet mode RX we also need to configure a receive flow to configure the >> packet receiption >> - the source and destination threads must be paired >> - at minimum one pair of rings need to be configured: >> - tx: transfer ring and transfer completion ring >> - rx: free descriptor ring and receive ring >> - two interrupts: UDMA-P channel interrupt and ring interrupt for tc_ring/r_ring >> - If the channel is in packet mode or configured to memcpy then we only need >> one interrupt from the ring, events from UDMAP is not used. >> >> When the channel setup is completed we only interract with the rings: >> - TX: push a descriptor to t_ring and wait for it to be pushed to the tc_ring by >> the UDMA-P >> - RX: push a descriptor to the fd_ring and waith for UDMA-P to push it back to >> the r_ring. >> >> Since we have FIFOs in the DMA fabric (UDMA-P, PSI-L and PDMA) which was not the >> case in previous DMAs we need to report the amount of data held in these FIFOs >> to clients (delay calculation for ALSA, UART FIFO flush support). >> >> Metadata support: >> DMAengine user driver was posted upstream based/tested on the v1 of the UDMA >> series: https://lkml.org/lkml/2019/6/28/20 >> SA2UL is using the metadata DMAengine API. >> >> Note on the last patch: >> In Keystone2 the networking had dedicated DMA (packet DMA) which is not the case >> anymore and the DMAengine API currently missing support for the features we >> would need to support networking, things like >> - support for receive descriptor 'classification' >> - we need to support several receive queues for a channel. >> - the queues are used for packet priority handling for example, but they can be >> used to have pools of descriptors for different sizes. >> - out of order completion of descriptors on a channel >> - when we have several queues to handle different priority packets the >> descriptors will be completed 'out-of-order' >> - NAPI type of operation (polling instead of interrupt driven transfer) >> - without this we can not sustain gigabit speeds and we need to support NAPI >> - not to limit this to networking, but other high performance operations >> >> It is my intention to work on these to be able to remove the 'glue' layer and >> switch to DMAengine API - or have an API aside of DMAengine to have generic way >> to support networking, but given how controversial and not trivial these changes >> are we need something to support networking. >> >> The series (+DT patches to enabled DMA on AM65x and j721e) on top of 5.5-rc1 is >> available: >> https://github.com/omap-audio/linux-audio.git peter/udma/series_v7-5.5-rc1 >> >> Regards, >> Peter >> --- >> Grygorii Strashko (3): >> bindings: soc: ti: add documentation for k3 ringacc >> soc: ti: k3: add navss ringacc driver >> dmaengine: ti: k3-udma: Add glue layer for non DMAengine users >> >> Peter Ujfalusi (9): >> dmaengine: doc: Add sections for per descriptor metadata support >> dmaengine: Add metadata_ops for dma_async_tx_descriptor >> dmaengine: Add support for reporting DMA cached data amount >> dmaengine: ti: Add cppi5 header for K3 NAVSS/UDMA >> dmaengine: ti: k3 PSI-L remote endpoint configuration >> dt-bindings: dma: ti: Add document for K3 UDMA >> dmaengine: ti: New driver for K3 UDMA >> firmware: ti_sci: rm: Add support for tx_tdtype parameter for tx >> channel >> dmaengine: ti: k3-udma: Wait for peer teardown completion if supported >> >> .../devicetree/bindings/dma/ti/k3-udma.yaml | 185 + >> .../devicetree/bindings/soc/ti/k3-ringacc.txt | 59 + >> Documentation/driver-api/dmaengine/client.rst | 75 + >> .../driver-api/dmaengine/provider.rst | 46 + >> drivers/dma/dmaengine.c | 73 + >> drivers/dma/dmaengine.h | 8 + >> drivers/dma/ti/Kconfig | 24 + >> drivers/dma/ti/Makefile | 3 + >> drivers/dma/ti/k3-psil-am654.c | 175 + >> drivers/dma/ti/k3-psil-j721e.c | 222 ++ >> drivers/dma/ti/k3-psil-priv.h | 39 + >> drivers/dma/ti/k3-psil.c | 97 + >> drivers/dma/ti/k3-udma-glue.c | 1198 ++++++ >> drivers/dma/ti/k3-udma-private.c | 133 + >> drivers/dma/ti/k3-udma.c | 3452 +++++++++++++++++ >> drivers/dma/ti/k3-udma.h | 151 + >> drivers/firmware/ti_sci.c | 1 + >> drivers/firmware/ti_sci.h | 7 + >> drivers/soc/ti/Kconfig | 11 + >> drivers/soc/ti/Makefile | 1 + >> drivers/soc/ti/k3-ringacc.c | 1180 ++++++ >> include/linux/dma/k3-psil.h | 71 + >> include/linux/dma/k3-udma-glue.h | 134 + >> include/linux/dma/ti-cppi5.h | 1061 +++++ >> include/linux/dmaengine.h | 110 + >> include/linux/soc/ti/k3-ringacc.h | 244 ++ >> include/linux/soc/ti/ti_sci_protocol.h | 2 + >> 27 files changed, 8762 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/dma/ti/k3-udma.yaml >> create mode 100644 Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt >> create mode 100644 drivers/dma/ti/k3-psil-am654.c >> create mode 100644 drivers/dma/ti/k3-psil-j721e.c >> create mode 100644 drivers/dma/ti/k3-psil-priv.h >> create mode 100644 drivers/dma/ti/k3-psil.c >> create mode 100644 drivers/dma/ti/k3-udma-glue.c >> create mode 100644 drivers/dma/ti/k3-udma-private.c >> create mode 100644 drivers/dma/ti/k3-udma.c >> create mode 100644 drivers/dma/ti/k3-udma.h >> create mode 100644 drivers/soc/ti/k3-ringacc.c >> create mode 100644 include/linux/dma/k3-psil.h >> create mode 100644 include/linux/dma/k3-udma-glue.h >> create mode 100644 include/linux/dma/ti-cppi5.h >> create mode 100644 include/linux/soc/ti/k3-ringacc.h >> > > - Péter > > -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
On 12/12/2019 12:55, Tero Kristo wrote: > On 12/12/2019 10:46, Peter Ujfalusi wrote: >> >> >> On 09/12/2019 11.43, Peter Ujfalusi wrote: >>> Hi, >>> >>> Vinod, Nishanth, Tero, Santosh: the ti_sci patch in this series was sent >>> upstream over a month ago: >>> https://lore.kernel.org/lkml/20191025084715.25098-1-peter.ujfalusi@ti.com/ >>> >>> >>> I'm still waiting on it's fate (Tero has given his r-b). >>> The ti_sci patch did not made it to 5.5-rc1, but I included it in the >>> series and >>> let the maintainers decide if it can go via DMAengine for 5.6 or to >>> later >>> releases (5.6 probably for the ti_sci and 5.7 for the UDMA driver >>> patch). >>> >>> Changes since v6: >>> (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=209455&state=*) >>> >>> >>> - UDMAP DMAengine driver: >>> - Squashed the split patches >>> - Squashed the early TX completion handling update >>> >>> (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=210713&state=*) >>> >>> - Hard reset fix for RX channels to avoid channel lockdown >>> - Correct completed descriptor's residue value >> >> I got build failure with allmodconfig: >> >> ERROR: "devm_ti_sci_get_of_resource" [drivers/soc/ti/k3-ringacc.ko] >> undefined! >> ERROR: "of_msi_get_domain" [drivers/soc/ti/k3-ringacc.ko] undefined! >> ERROR: "devm_ti_sci_get_of_resource" [drivers/dma/ti/k3-udma.ko] >> undefined! >> ERROR: "of_msi_get_domain" [drivers/dma/ti/k3-udma.ko] undefined! >> >> They are because both devm_ti_sci_get_of_resource and of_msi_get_domain >> is missing EXPORT_SYMBOL_GPL(), so they can not be used from modules. >> >> There were patches in the past to add it for of_msi_get_domain: >> https://lore.kernel.org/patchwork/patch/668123/ >> https://lore.kernel.org/patchwork/patch/716046/ >> >> I can not find a reason why these are not merged. >> Matthias's patch looks to be the earlier one, is it OK if I resend it >> within v8? > > You can just send those two patches separately, I can apply them first > before this series. No need to resend this series. Oops, sorry about the noise, I got confused with the internal mailing list and this one (trying to get it merged internally at the same time.) Ignore my comment. -Tero > >> >>> Changes since v5: >>> (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=201051&state=*) >>> >>> - Based on 5.4 >>> >>> - cppi5 header >>> - clear the bits before setting new value with '|=' >>> >>> - UDMAP DT bindings: >>> - valid compatibles as single enum list >>> >>> - UDMAP DMAengine driver: >>> - Fix udma_is_chan_running() >>> - Use flags for acc32, burst support instead of a bool in >>> udma_match_data >>> struct >>> - TDTYPE handling (teardown completion handling for j721e) is moved >>> to separate >>> patch as the tisci core patch has not moved for over a month. >>> Both ti_sci and the iterative patch to udma is included in the >>> series. >>> >>> Changes since v4 >>> (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=196619&state=*) >>> >>> - Based on 5.4-rc7 >>> >>> - ringacc DT bindings: >>> - clarify the meaning of ti,sci-dev-id >>> >>> - ringacc driver: >>> - Remove 'default y' from Kconfig >>> - Fix struct comments >>> - Move try_module_get() earlier in k3_ringacc_request_ring() >>> >>> - PSI-L thread database: >>> - Add kernel style struct/enum documentation >>> - Add missing thread description for sa2ul second interface >>> - Change EXPORT_SYMBOL to EXPORT_SYMBOL_GPL >>> >>> - UDMAP DT bindings: >>> - move to dual license >>> - change compatible from const to enum >>> - items dropped for ti,sci-rm-ranges-* >>> - description text moved from literal block when it is sensible >>> - example fixed to compile cleanly >>> - added parent to provide correct address-cells >>> - navss is moved to simple-mfd from simple-bus >>> >>> - UDMAP DMAengine driver: >>> - move fd_ring/r_ring under rflow >>> - get rid of unused iomem for rflows >>> - Remove 'default y' from Kconfig >>> - Use defines for rflow src/dst tag selection >>> - Merge the udma_ring_callback() and udma_tr_event_callback() to their >>> corresponding interrupt handler >>> - Create new defines for tx/rx channel's tisci valid parameter flags >>> - Remove re-initialization to 0 of tisci request struct members >>> - Make sure that vchan tasklets are also stopped when removing the >>> module >>> - Additional checkpatch --strict fixes when it made sense >>> - make W=1 was clean >>> >>> - UDMAP glue layer: >>> - Remove 'default y' from Kconfig >>> - commit message update for features needing the glue layer >>> >>> Changes since v3 >>> (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=180679&state=*): >>> >>> - Based on 5.4-rc5 >>> - Fixed typos pointed out by Tero >>> - Added reviewed-by tags from Tero >>> >>> - ring accelerator driver >>> - TODO_GS is removed from the header >>> - pm_runtime removed as NAVSS and it's components are always on >>> - Check validity of Message mode setup (element size > 8 bytes must >>> use proxy) >>> >>> - cppi5 header >>> - add commit message >>> >>> - UDMAP DT bindings >>> - Drop the psil-config node use on the remote PSI-L side and use >>> only one cell >>> which is the remote threadID: >>> >>> dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>; >>> dma-names = "tx", "rx"; >>> >>> - The PSI-L thread configuration description is moved to kernel as >>> a new module: >>> k3-psil/k3-psil-am654/k3-psil-j721e >>> - ti,psil-base has been removed and moved to kernel >>> - removed the no longer needed dt-bindings/dma/k3-udma.h >>> - Convert the document to schema (yaml) >>> >>> - NEW PSI-L endpoint configuration database >>> - a simple database holding the remote end's configuration needed >>> for UDMAP >>> configuration. All previous parameters from DT has been moved >>> here and merged >>> with the linux only tr mode channel flag. >>> - Client drivers can update the remote endpoint configuration as it >>> can be >>> different based on system configuration and the endpoint itself >>> is under the >>> control of the peripheral driver. >>> - database for am654 and j721e >>> >>> - UDMAP DMAengine driver >>> - pm_runtime removed as NAVSS and it's components are always on >>> - rchan_oes_offset added to MSI dommain allocation >>> - Use the new PSI-L endpoint database for UDMAP configuration >>> - Support for waiting for PDMA teardown completion on j721e instead of >>> returning right away. depends on: >>> https://lkml.org/lkml/2019/10/25/189 >>> Not included in this series, but it is in the branch I have >>> prepared. >>> - psil-base is moved from DT to be part of udma_match_data >>> - tr_thread maps is removed and using the PSI-L endpoint >>> configuration for it >>> >>> - UDMAP glue layer >>> - pm_runtime removed as NAVSS and it's components are always on >>> - Use the new PSI-L endpoint database for UDMAP configuration >>> >>> Changes since v2 >>> (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=152609&state=*) >>> >>> - Based on 5.4-rc1 >>> - Support for Flow only data transfer for the glue layer >>> >>> - cppi5 header >>> - comments converted to kernel-doc style >>> - Remove the excessive WARN_ONs and rely on the user for sanity >>> - new macro for checking TearDown Completion Message >>> >>> - ring accelerator driver >>> - fixed up th commit message (SoB, TI-SCI) >>> - fixed ring reset >>> - CONFIG_TI_K3_RINGACC_DEBUG is removed along with the >>> dbg_write/read functions >>> and use dev_dbg() >>> - k3_ringacc_ring_dump() is moved to static >>> - step numbering removed from k3_ringacc_ring_reset_dma() >>> - Add clarification comment for shared ring usage in >>> k3_ringacc_ring_cfg() >>> - Magic shift values in k3_ringacc_ring_cfg_proxy() got defined >>> - K3_RINGACC_RING_MODE_QM is removed as it is not supported >>> >>> - UDMAP DT bindings >>> - Fix property prefixing: s/pdma,/ti,pdma- >>> - Add ti,notdpkt property to suppress teardown completion message >>> on tchan >>> - example updated accordingly >>> >>> - UDMAP DMAengine driver >>> - Change __raw_readl/writel to readl/writel >>> - Split up the udma_tisci_channel_config() into m2m, tx and rx tisci >>> configuration functions for clarity >>> - DT bindings change: s/pdma,/ti,pdma- >>> - Cleanup of udma_tx_status(): >>> - residue calculation fix for m2m >>> - no need to read packet counter as it is not used >>> - peer byte counter only available in PDMAs >>> - Proper locking to avoid race with interrupt handler (polled m2m >>> fix) >>> - Support for ti,notdpkt >>> - RFLOW management rework to support data movement without channel: >>> - the channel is not controlled by Linux but other core and we >>> only have >>> rflows and rings to do the DMA transfers. >>> This mode is only supported by the Glue layer for now. >>> >>> - UDMAP glue layer >>> - Debug print improvements >>> - Support for rflow/ring only data movement >>> >>> Changes since v1 >>> (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=114105&state=*) >>> >>> - Added support for j721e >>> - Based on 5.3-rc2 >>> - dropped ti_sci API patch for RM management as it is already upstream >>> - dropped dmadev_get_slave_channel() patch, using >>> __dma_request_channel() >>> - Added Rob's Reviewed-by to ringacc DT binding document patch >>> - DT bindings changes: >>> - linux,udma-mode is gone, I have a simple lookup table in the >>> driver to flag >>> TR channels. >>> - Support for j721e >>> - Fix bug in of_node_put() handling in xlate function >>> >>> Changes since RFC (https://patchwork.kernel.org/cover/10612465/): >>> - Based on linux-next (20190506) which now have the ti_sci interrupt >>> support >>> - The series can be applied and the UDMA via DMAengine API will be >>> functional >>> - Included in the series: ti_sci Resource management API, cppi5 >>> header and >>> driver for the ring accelerator. >>> - The DMAengine core patches have been updated as per the review >>> comments for >>> earlier submittion. >>> - The DMAengine driver patch is artificially split up to 6 smaller >>> patches >>> >>> The k3-udma driver implements the Data Movement Architecture >>> described in >>> AM65x TRM (http://www.ti.com/lit/pdf/spruid7) and >>> j721e TRM (http://www.ti.com/lit/pdf/spruil1) >>> >>> This DMA architecture is a big departure from 'traditional' >>> architecture where >>> we had either EDMA or sDMA as system DMA. >>> >>> Packet DMAs were used as dedicated DMAs to service only networking >>> (Kesytone2) >>> or USB (am335x) while other peripherals were serviced by EDMA. >>> >>> In AM65x/j721e the UDMA (Unified DMA) is used for all data movment >>> within the >>> SoC, tasked to service all peripherals (UART, McSPI, McASP, >>> networking, etc). >>> >>> The NAVSS/UDMA is built around CPPI5 (Communications Port Programming >>> Interface) >>> and it supports Packet mode (similar to CPPI4.1 in Keystone2 for >>> networking) and >>> TR mode (similar to EDMA descriptor). >>> The data movement is done within a PSI-L fabric, peripherals >>> (including the >>> UDMA-P) are not addressed by their I/O register as with traditional >>> DMAs but >>> with their PSI-L thread ID. >>> >>> In AM65x/j721e we have two main type of peripherals: >>> Legacy: McASP, McSPI, UART, etc. >>> to provide connectivity they are serviced by PDMA (Peripheral DMA) >>> PDMA threads are locked to service a given peripheral, for example >>> PSI-L thread >>> 0x4400/0xc400 is to service McASP0 rx/tx. >>> The PDMa configuration can be done via the UDMA Real Time Peer >>> registers. >>> Native: Networking, security accelerator >>> these peripherals have native support for PSI-L. >>> >>> To be able to use the DMA the following generic steps need to be taken: >>> - configure a DMA channel (tchan for TX, rchan for RX) >>> - channel mode: Packet or TR mode >>> - for memcpy a tchan and rchan pair is used. >>> - for packet mode RX we also need to configure a receive flow to >>> configure the >>> packet receiption >>> - the source and destination threads must be paired >>> - at minimum one pair of rings need to be configured: >>> - tx: transfer ring and transfer completion ring >>> - rx: free descriptor ring and receive ring >>> - two interrupts: UDMA-P channel interrupt and ring interrupt for >>> tc_ring/r_ring >>> - If the channel is in packet mode or configured to memcpy then we >>> only need >>> one interrupt from the ring, events from UDMAP is not used. >>> >>> When the channel setup is completed we only interract with the rings: >>> - TX: push a descriptor to t_ring and wait for it to be pushed to the >>> tc_ring by >>> the UDMA-P >>> - RX: push a descriptor to the fd_ring and waith for UDMA-P to push >>> it back to >>> the r_ring. >>> >>> Since we have FIFOs in the DMA fabric (UDMA-P, PSI-L and PDMA) which >>> was not the >>> case in previous DMAs we need to report the amount of data held in >>> these FIFOs >>> to clients (delay calculation for ALSA, UART FIFO flush support). >>> >>> Metadata support: >>> DMAengine user driver was posted upstream based/tested on the v1 of >>> the UDMA >>> series: https://lkml.org/lkml/2019/6/28/20 >>> SA2UL is using the metadata DMAengine API. >>> >>> Note on the last patch: >>> In Keystone2 the networking had dedicated DMA (packet DMA) which is >>> not the case >>> anymore and the DMAengine API currently missing support for the >>> features we >>> would need to support networking, things like >>> - support for receive descriptor 'classification' >>> - we need to support several receive queues for a channel. >>> - the queues are used for packet priority handling for example, but >>> they can be >>> used to have pools of descriptors for different sizes. >>> - out of order completion of descriptors on a channel >>> - when we have several queues to handle different priority packets the >>> descriptors will be completed 'out-of-order' >>> - NAPI type of operation (polling instead of interrupt driven transfer) >>> - without this we can not sustain gigabit speeds and we need to >>> support NAPI >>> - not to limit this to networking, but other high performance >>> operations >>> >>> It is my intention to work on these to be able to remove the 'glue' >>> layer and >>> switch to DMAengine API - or have an API aside of DMAengine to have >>> generic way >>> to support networking, but given how controversial and not trivial >>> these changes >>> are we need something to support networking. >>> >>> The series (+DT patches to enabled DMA on AM65x and j721e) on top of >>> 5.5-rc1 is >>> available: >>> https://github.com/omap-audio/linux-audio.git >>> peter/udma/series_v7-5.5-rc1 >>> >>> Regards, >>> Peter >>> --- >>> Grygorii Strashko (3): >>> bindings: soc: ti: add documentation for k3 ringacc >>> soc: ti: k3: add navss ringacc driver >>> dmaengine: ti: k3-udma: Add glue layer for non DMAengine users >>> >>> Peter Ujfalusi (9): >>> dmaengine: doc: Add sections for per descriptor metadata support >>> dmaengine: Add metadata_ops for dma_async_tx_descriptor >>> dmaengine: Add support for reporting DMA cached data amount >>> dmaengine: ti: Add cppi5 header for K3 NAVSS/UDMA >>> dmaengine: ti: k3 PSI-L remote endpoint configuration >>> dt-bindings: dma: ti: Add document for K3 UDMA >>> dmaengine: ti: New driver for K3 UDMA >>> firmware: ti_sci: rm: Add support for tx_tdtype parameter for tx >>> channel >>> dmaengine: ti: k3-udma: Wait for peer teardown completion if >>> supported >>> >>> .../devicetree/bindings/dma/ti/k3-udma.yaml | 185 + >>> .../devicetree/bindings/soc/ti/k3-ringacc.txt | 59 + >>> Documentation/driver-api/dmaengine/client.rst | 75 + >>> .../driver-api/dmaengine/provider.rst | 46 + >>> drivers/dma/dmaengine.c | 73 + >>> drivers/dma/dmaengine.h | 8 + >>> drivers/dma/ti/Kconfig | 24 + >>> drivers/dma/ti/Makefile | 3 + >>> drivers/dma/ti/k3-psil-am654.c | 175 + >>> drivers/dma/ti/k3-psil-j721e.c | 222 ++ >>> drivers/dma/ti/k3-psil-priv.h | 39 + >>> drivers/dma/ti/k3-psil.c | 97 + >>> drivers/dma/ti/k3-udma-glue.c | 1198 ++++++ >>> drivers/dma/ti/k3-udma-private.c | 133 + >>> drivers/dma/ti/k3-udma.c | 3452 +++++++++++++++++ >>> drivers/dma/ti/k3-udma.h | 151 + >>> drivers/firmware/ti_sci.c | 1 + >>> drivers/firmware/ti_sci.h | 7 + >>> drivers/soc/ti/Kconfig | 11 + >>> drivers/soc/ti/Makefile | 1 + >>> drivers/soc/ti/k3-ringacc.c | 1180 ++++++ >>> include/linux/dma/k3-psil.h | 71 + >>> include/linux/dma/k3-udma-glue.h | 134 + >>> include/linux/dma/ti-cppi5.h | 1061 +++++ >>> include/linux/dmaengine.h | 110 + >>> include/linux/soc/ti/k3-ringacc.h | 244 ++ >>> include/linux/soc/ti/ti_sci_protocol.h | 2 + >>> 27 files changed, 8762 insertions(+) >>> create mode 100644 >>> Documentation/devicetree/bindings/dma/ti/k3-udma.yaml >>> create mode 100644 >>> Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt >>> create mode 100644 drivers/dma/ti/k3-psil-am654.c >>> create mode 100644 drivers/dma/ti/k3-psil-j721e.c >>> create mode 100644 drivers/dma/ti/k3-psil-priv.h >>> create mode 100644 drivers/dma/ti/k3-psil.c >>> create mode 100644 drivers/dma/ti/k3-udma-glue.c >>> create mode 100644 drivers/dma/ti/k3-udma-private.c >>> create mode 100644 drivers/dma/ti/k3-udma.c >>> create mode 100644 drivers/dma/ti/k3-udma.h >>> create mode 100644 drivers/soc/ti/k3-ringacc.c >>> create mode 100644 include/linux/dma/k3-psil.h >>> create mode 100644 include/linux/dma/k3-udma-glue.h >>> create mode 100644 include/linux/dma/ti-cppi5.h >>> create mode 100644 include/linux/soc/ti/k3-ringacc.h >>> >> >> - Péter >> >> > -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
On 09/12/2019 11:43, Peter Ujfalusi wrote: > Hi, > > Vinod, Nishanth, Tero, Santosh: the ti_sci patch in this series was sent > upstream over a month ago: > https://lore.kernel.org/lkml/20191025084715.25098-1-peter.ujfalusi@ti.com/ > > I'm still waiting on it's fate (Tero has given his r-b). > The ti_sci patch did not made it to 5.5-rc1, but I included it in the series and > let the maintainers decide if it can go via DMAengine for 5.6 or to later > releases (5.6 probably for the ti_sci and 5.7 for the UDMA driver patch). > > Changes since v6: > (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=209455&state=*) > > - UDMAP DMAengine driver: > - Squashed the split patches > - Squashed the early TX completion handling update > (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=210713&state=*) > - Hard reset fix for RX channels to avoid channel lockdown > - Correct completed descriptor's residue value > Thank you Peter, Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Viond, On 12/12/2019 10.46, Peter Ujfalusi wrote: > > > On 09/12/2019 11.43, Peter Ujfalusi wrote: >> Hi, >> >> Vinod, Nishanth, Tero, Santosh: the ti_sci patch in this series was sent >> upstream over a month ago: >> https://lore.kernel.org/lkml/20191025084715.25098-1-peter.ujfalusi@ti.com/ >> >> I'm still waiting on it's fate (Tero has given his r-b). >> The ti_sci patch did not made it to 5.5-rc1, but I included it in the series and >> let the maintainers decide if it can go via DMAengine for 5.6 or to later >> releases (5.6 probably for the ti_sci and 5.7 for the UDMA driver patch). >> >> Changes since v6: >> (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=209455&state=*) >> >> - UDMAP DMAengine driver: >> - Squashed the split patches >> - Squashed the early TX completion handling update >> (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=210713&state=*) >> - Hard reset fix for RX channels to avoid channel lockdown >> - Correct completed descriptor's residue value > > I got build failure with allmodconfig: > > ERROR: "devm_ti_sci_get_of_resource" [drivers/soc/ti/k3-ringacc.ko] > undefined! > ERROR: "of_msi_get_domain" [drivers/soc/ti/k3-ringacc.ko] undefined! > ERROR: "devm_ti_sci_get_of_resource" [drivers/dma/ti/k3-udma.ko] undefined! > ERROR: "of_msi_get_domain" [drivers/dma/ti/k3-udma.ko] undefined! > > They are because both devm_ti_sci_get_of_resource and of_msi_get_domain > is missing EXPORT_SYMBOL_GPL(), so they can not be used from modules. > > There were patches in the past to add it for of_msi_get_domain: > https://lore.kernel.org/patchwork/patch/668123/ > https://lore.kernel.org/patchwork/patch/716046/ > > I can not find a reason why these are not merged. > Matthias's patch looks to be the earlier one, is it OK if I resend it > within v8? To speed things up I can make the ringacc and UDMA driver to bool for now (should I remove the .remove as well from them?) and post the two export patches separately. When they are both in I'll add back the tristate (and add the .remove implementation if they are removed). - Péter > >> Changes since v5: >> (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=201051&state=*) >> - Based on 5.4 >> >> - cppi5 header >> - clear the bits before setting new value with '|=' >> >> - UDMAP DT bindings: >> - valid compatibles as single enum list >> >> - UDMAP DMAengine driver: >> - Fix udma_is_chan_running() >> - Use flags for acc32, burst support instead of a bool in udma_match_data >> struct >> - TDTYPE handling (teardown completion handling for j721e) is moved to separate >> patch as the tisci core patch has not moved for over a month. >> Both ti_sci and the iterative patch to udma is included in the series. >> >> Changes since v4 >> (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=196619&state=*) >> - Based on 5.4-rc7 >> >> - ringacc DT bindings: >> - clarify the meaning of ti,sci-dev-id >> >> - ringacc driver: >> - Remove 'default y' from Kconfig >> - Fix struct comments >> - Move try_module_get() earlier in k3_ringacc_request_ring() >> >> - PSI-L thread database: >> - Add kernel style struct/enum documentation >> - Add missing thread description for sa2ul second interface >> - Change EXPORT_SYMBOL to EXPORT_SYMBOL_GPL >> >> - UDMAP DT bindings: >> - move to dual license >> - change compatible from const to enum >> - items dropped for ti,sci-rm-ranges-* >> - description text moved from literal block when it is sensible >> - example fixed to compile cleanly >> - added parent to provide correct address-cells >> - navss is moved to simple-mfd from simple-bus >> >> - UDMAP DMAengine driver: >> - move fd_ring/r_ring under rflow >> - get rid of unused iomem for rflows >> - Remove 'default y' from Kconfig >> - Use defines for rflow src/dst tag selection >> - Merge the udma_ring_callback() and udma_tr_event_callback() to their >> corresponding interrupt handler >> - Create new defines for tx/rx channel's tisci valid parameter flags >> - Remove re-initialization to 0 of tisci request struct members >> - Make sure that vchan tasklets are also stopped when removing the module >> - Additional checkpatch --strict fixes when it made sense >> - make W=1 was clean >> >> - UDMAP glue layer: >> - Remove 'default y' from Kconfig >> - commit message update for features needing the glue layer >> >> Changes since v3 >> (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=180679&state=*): >> - Based on 5.4-rc5 >> - Fixed typos pointed out by Tero >> - Added reviewed-by tags from Tero >> >> - ring accelerator driver >> - TODO_GS is removed from the header >> - pm_runtime removed as NAVSS and it's components are always on >> - Check validity of Message mode setup (element size > 8 bytes must use proxy) >> >> - cppi5 header >> - add commit message >> >> - UDMAP DT bindings >> - Drop the psil-config node use on the remote PSI-L side and use only one cell >> which is the remote threadID: >> >> dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>; >> dma-names = "tx", "rx"; >> >> - The PSI-L thread configuration description is moved to kernel as a new module: >> k3-psil/k3-psil-am654/k3-psil-j721e >> - ti,psil-base has been removed and moved to kernel >> - removed the no longer needed dt-bindings/dma/k3-udma.h >> - Convert the document to schema (yaml) >> >> - NEW PSI-L endpoint configuration database >> - a simple database holding the remote end's configuration needed for UDMAP >> configuration. All previous parameters from DT has been moved here and merged >> with the linux only tr mode channel flag. >> - Client drivers can update the remote endpoint configuration as it can be >> different based on system configuration and the endpoint itself is under the >> control of the peripheral driver. >> - database for am654 and j721e >> >> - UDMAP DMAengine driver >> - pm_runtime removed as NAVSS and it's components are always on >> - rchan_oes_offset added to MSI dommain allocation >> - Use the new PSI-L endpoint database for UDMAP configuration >> - Support for waiting for PDMA teardown completion on j721e instead of >> returning right away. depends on: >> https://lkml.org/lkml/2019/10/25/189 >> Not included in this series, but it is in the branch I have prepared. >> - psil-base is moved from DT to be part of udma_match_data >> - tr_thread maps is removed and using the PSI-L endpoint configuration for it >> >> - UDMAP glue layer >> - pm_runtime removed as NAVSS and it's components are always on >> - Use the new PSI-L endpoint database for UDMAP configuration >> >> Changes since v2 >> (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=152609&state=*) >> - Based on 5.4-rc1 >> - Support for Flow only data transfer for the glue layer >> >> - cppi5 header >> - comments converted to kernel-doc style >> - Remove the excessive WARN_ONs and rely on the user for sanity >> - new macro for checking TearDown Completion Message >> >> - ring accelerator driver >> - fixed up th commit message (SoB, TI-SCI) >> - fixed ring reset >> - CONFIG_TI_K3_RINGACC_DEBUG is removed along with the dbg_write/read functions >> and use dev_dbg() >> - k3_ringacc_ring_dump() is moved to static >> - step numbering removed from k3_ringacc_ring_reset_dma() >> - Add clarification comment for shared ring usage in k3_ringacc_ring_cfg() >> - Magic shift values in k3_ringacc_ring_cfg_proxy() got defined >> - K3_RINGACC_RING_MODE_QM is removed as it is not supported >> >> - UDMAP DT bindings >> - Fix property prefixing: s/pdma,/ti,pdma- >> - Add ti,notdpkt property to suppress teardown completion message on tchan >> - example updated accordingly >> >> - UDMAP DMAengine driver >> - Change __raw_readl/writel to readl/writel >> - Split up the udma_tisci_channel_config() into m2m, tx and rx tisci >> configuration functions for clarity >> - DT bindings change: s/pdma,/ti,pdma- >> - Cleanup of udma_tx_status(): >> - residue calculation fix for m2m >> - no need to read packet counter as it is not used >> - peer byte counter only available in PDMAs >> - Proper locking to avoid race with interrupt handler (polled m2m fix) >> - Support for ti,notdpkt >> - RFLOW management rework to support data movement without channel: >> - the channel is not controlled by Linux but other core and we only have >> rflows and rings to do the DMA transfers. >> This mode is only supported by the Glue layer for now. >> >> - UDMAP glue layer >> - Debug print improvements >> - Support for rflow/ring only data movement >> >> Changes since v1 >> (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=114105&state=*) >> - Added support for j721e >> - Based on 5.3-rc2 >> - dropped ti_sci API patch for RM management as it is already upstream >> - dropped dmadev_get_slave_channel() patch, using __dma_request_channel() >> - Added Rob's Reviewed-by to ringacc DT binding document patch >> - DT bindings changes: >> - linux,udma-mode is gone, I have a simple lookup table in the driver to flag >> TR channels. >> - Support for j721e >> - Fix bug in of_node_put() handling in xlate function >> >> Changes since RFC (https://patchwork.kernel.org/cover/10612465/): >> - Based on linux-next (20190506) which now have the ti_sci interrupt support >> - The series can be applied and the UDMA via DMAengine API will be functional >> - Included in the series: ti_sci Resource management API, cppi5 header and >> driver for the ring accelerator. >> - The DMAengine core patches have been updated as per the review comments for >> earlier submittion. >> - The DMAengine driver patch is artificially split up to 6 smaller patches >> >> The k3-udma driver implements the Data Movement Architecture described in >> AM65x TRM (http://www.ti.com/lit/pdf/spruid7) and >> j721e TRM (http://www.ti.com/lit/pdf/spruil1) >> >> This DMA architecture is a big departure from 'traditional' architecture where >> we had either EDMA or sDMA as system DMA. >> >> Packet DMAs were used as dedicated DMAs to service only networking (Kesytone2) >> or USB (am335x) while other peripherals were serviced by EDMA. >> >> In AM65x/j721e the UDMA (Unified DMA) is used for all data movment within the >> SoC, tasked to service all peripherals (UART, McSPI, McASP, networking, etc). >> >> The NAVSS/UDMA is built around CPPI5 (Communications Port Programming Interface) >> and it supports Packet mode (similar to CPPI4.1 in Keystone2 for networking) and >> TR mode (similar to EDMA descriptor). >> The data movement is done within a PSI-L fabric, peripherals (including the >> UDMA-P) are not addressed by their I/O register as with traditional DMAs but >> with their PSI-L thread ID. >> >> In AM65x/j721e we have two main type of peripherals: >> Legacy: McASP, McSPI, UART, etc. >> to provide connectivity they are serviced by PDMA (Peripheral DMA) >> PDMA threads are locked to service a given peripheral, for example PSI-L thread >> 0x4400/0xc400 is to service McASP0 rx/tx. >> The PDMa configuration can be done via the UDMA Real Time Peer registers. >> Native: Networking, security accelerator >> these peripherals have native support for PSI-L. >> >> To be able to use the DMA the following generic steps need to be taken: >> - configure a DMA channel (tchan for TX, rchan for RX) >> - channel mode: Packet or TR mode >> - for memcpy a tchan and rchan pair is used. >> - for packet mode RX we also need to configure a receive flow to configure the >> packet receiption >> - the source and destination threads must be paired >> - at minimum one pair of rings need to be configured: >> - tx: transfer ring and transfer completion ring >> - rx: free descriptor ring and receive ring >> - two interrupts: UDMA-P channel interrupt and ring interrupt for tc_ring/r_ring >> - If the channel is in packet mode or configured to memcpy then we only need >> one interrupt from the ring, events from UDMAP is not used. >> >> When the channel setup is completed we only interract with the rings: >> - TX: push a descriptor to t_ring and wait for it to be pushed to the tc_ring by >> the UDMA-P >> - RX: push a descriptor to the fd_ring and waith for UDMA-P to push it back to >> the r_ring. >> >> Since we have FIFOs in the DMA fabric (UDMA-P, PSI-L and PDMA) which was not the >> case in previous DMAs we need to report the amount of data held in these FIFOs >> to clients (delay calculation for ALSA, UART FIFO flush support). >> >> Metadata support: >> DMAengine user driver was posted upstream based/tested on the v1 of the UDMA >> series: https://lkml.org/lkml/2019/6/28/20 >> SA2UL is using the metadata DMAengine API. >> >> Note on the last patch: >> In Keystone2 the networking had dedicated DMA (packet DMA) which is not the case >> anymore and the DMAengine API currently missing support for the features we >> would need to support networking, things like >> - support for receive descriptor 'classification' >> - we need to support several receive queues for a channel. >> - the queues are used for packet priority handling for example, but they can be >> used to have pools of descriptors for different sizes. >> - out of order completion of descriptors on a channel >> - when we have several queues to handle different priority packets the >> descriptors will be completed 'out-of-order' >> - NAPI type of operation (polling instead of interrupt driven transfer) >> - without this we can not sustain gigabit speeds and we need to support NAPI >> - not to limit this to networking, but other high performance operations >> >> It is my intention to work on these to be able to remove the 'glue' layer and >> switch to DMAengine API - or have an API aside of DMAengine to have generic way >> to support networking, but given how controversial and not trivial these changes >> are we need something to support networking. >> >> The series (+DT patches to enabled DMA on AM65x and j721e) on top of 5.5-rc1 is >> available: >> https://github.com/omap-audio/linux-audio.git peter/udma/series_v7-5.5-rc1 >> >> Regards, >> Peter >> --- >> Grygorii Strashko (3): >> bindings: soc: ti: add documentation for k3 ringacc >> soc: ti: k3: add navss ringacc driver >> dmaengine: ti: k3-udma: Add glue layer for non DMAengine users >> >> Peter Ujfalusi (9): >> dmaengine: doc: Add sections for per descriptor metadata support >> dmaengine: Add metadata_ops for dma_async_tx_descriptor >> dmaengine: Add support for reporting DMA cached data amount >> dmaengine: ti: Add cppi5 header for K3 NAVSS/UDMA >> dmaengine: ti: k3 PSI-L remote endpoint configuration >> dt-bindings: dma: ti: Add document for K3 UDMA >> dmaengine: ti: New driver for K3 UDMA >> firmware: ti_sci: rm: Add support for tx_tdtype parameter for tx >> channel >> dmaengine: ti: k3-udma: Wait for peer teardown completion if supported >> >> .../devicetree/bindings/dma/ti/k3-udma.yaml | 185 + >> .../devicetree/bindings/soc/ti/k3-ringacc.txt | 59 + >> Documentation/driver-api/dmaengine/client.rst | 75 + >> .../driver-api/dmaengine/provider.rst | 46 + >> drivers/dma/dmaengine.c | 73 + >> drivers/dma/dmaengine.h | 8 + >> drivers/dma/ti/Kconfig | 24 + >> drivers/dma/ti/Makefile | 3 + >> drivers/dma/ti/k3-psil-am654.c | 175 + >> drivers/dma/ti/k3-psil-j721e.c | 222 ++ >> drivers/dma/ti/k3-psil-priv.h | 39 + >> drivers/dma/ti/k3-psil.c | 97 + >> drivers/dma/ti/k3-udma-glue.c | 1198 ++++++ >> drivers/dma/ti/k3-udma-private.c | 133 + >> drivers/dma/ti/k3-udma.c | 3452 +++++++++++++++++ >> drivers/dma/ti/k3-udma.h | 151 + >> drivers/firmware/ti_sci.c | 1 + >> drivers/firmware/ti_sci.h | 7 + >> drivers/soc/ti/Kconfig | 11 + >> drivers/soc/ti/Makefile | 1 + >> drivers/soc/ti/k3-ringacc.c | 1180 ++++++ >> include/linux/dma/k3-psil.h | 71 + >> include/linux/dma/k3-udma-glue.h | 134 + >> include/linux/dma/ti-cppi5.h | 1061 +++++ >> include/linux/dmaengine.h | 110 + >> include/linux/soc/ti/k3-ringacc.h | 244 ++ >> include/linux/soc/ti/ti_sci_protocol.h | 2 + >> 27 files changed, 8762 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/dma/ti/k3-udma.yaml >> create mode 100644 Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt >> create mode 100644 drivers/dma/ti/k3-psil-am654.c >> create mode 100644 drivers/dma/ti/k3-psil-j721e.c >> create mode 100644 drivers/dma/ti/k3-psil-priv.h >> create mode 100644 drivers/dma/ti/k3-psil.c >> create mode 100644 drivers/dma/ti/k3-udma-glue.c >> create mode 100644 drivers/dma/ti/k3-udma-private.c >> create mode 100644 drivers/dma/ti/k3-udma.c >> create mode 100644 drivers/dma/ti/k3-udma.h >> create mode 100644 drivers/soc/ti/k3-ringacc.c >> create mode 100644 include/linux/dma/k3-psil.h >> create mode 100644 include/linux/dma/k3-udma-glue.h >> create mode 100644 include/linux/dma/ti-cppi5.h >> create mode 100644 include/linux/soc/ti/k3-ringacc.h >> > > - Péter > > Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. > Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki > Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Hi, Vinod, Nishanth, Tero, Santosh: the ti_sci patch in this series was sent upstream over a month ago: https://lore.kernel.org/lkml/20191025084715.25098-1-peter.ujfalusi@ti.com/ I'm still waiting on it's fate (Tero has given his r-b). The ti_sci patch did not made it to 5.5-rc1, but I included it in the series and let the maintainers decide if it can go via DMAengine for 5.6 or to later releases (5.6 probably for the ti_sci and 5.7 for the UDMA driver patch). Changes since v6: (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=209455&state=*) - UDMAP DMAengine driver: - Squashed the split patches - Squashed the early TX completion handling update (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=210713&state=*) - Hard reset fix for RX channels to avoid channel lockdown - Correct completed descriptor's residue value Changes since v5: (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=201051&state=*) - Based on 5.4 - cppi5 header - clear the bits before setting new value with '|=' - UDMAP DT bindings: - valid compatibles as single enum list - UDMAP DMAengine driver: - Fix udma_is_chan_running() - Use flags for acc32, burst support instead of a bool in udma_match_data struct - TDTYPE handling (teardown completion handling for j721e) is moved to separate patch as the tisci core patch has not moved for over a month. Both ti_sci and the iterative patch to udma is included in the series. Changes since v4 (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=196619&state=*) - Based on 5.4-rc7 - ringacc DT bindings: - clarify the meaning of ti,sci-dev-id - ringacc driver: - Remove 'default y' from Kconfig - Fix struct comments - Move try_module_get() earlier in k3_ringacc_request_ring() - PSI-L thread database: - Add kernel style struct/enum documentation - Add missing thread description for sa2ul second interface - Change EXPORT_SYMBOL to EXPORT_SYMBOL_GPL - UDMAP DT bindings: - move to dual license - change compatible from const to enum - items dropped for ti,sci-rm-ranges-* - description text moved from literal block when it is sensible - example fixed to compile cleanly - added parent to provide correct address-cells - navss is moved to simple-mfd from simple-bus - UDMAP DMAengine driver: - move fd_ring/r_ring under rflow - get rid of unused iomem for rflows - Remove 'default y' from Kconfig - Use defines for rflow src/dst tag selection - Merge the udma_ring_callback() and udma_tr_event_callback() to their corresponding interrupt handler - Create new defines for tx/rx channel's tisci valid parameter flags - Remove re-initialization to 0 of tisci request struct members - Make sure that vchan tasklets are also stopped when removing the module - Additional checkpatch --strict fixes when it made sense - make W=1 was clean - UDMAP glue layer: - Remove 'default y' from Kconfig - commit message update for features needing the glue layer Changes since v3 (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=180679&state=*): - Based on 5.4-rc5 - Fixed typos pointed out by Tero - Added reviewed-by tags from Tero - ring accelerator driver - TODO_GS is removed from the header - pm_runtime removed as NAVSS and it's components are always on - Check validity of Message mode setup (element size > 8 bytes must use proxy) - cppi5 header - add commit message - UDMAP DT bindings - Drop the psil-config node use on the remote PSI-L side and use only one cell which is the remote threadID: dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>; dma-names = "tx", "rx"; - The PSI-L thread configuration description is moved to kernel as a new module: k3-psil/k3-psil-am654/k3-psil-j721e - ti,psil-base has been removed and moved to kernel - removed the no longer needed dt-bindings/dma/k3-udma.h - Convert the document to schema (yaml) - NEW PSI-L endpoint configuration database - a simple database holding the remote end's configuration needed for UDMAP configuration. All previous parameters from DT has been moved here and merged with the linux only tr mode channel flag. - Client drivers can update the remote endpoint configuration as it can be different based on system configuration and the endpoint itself is under the control of the peripheral driver. - database for am654 and j721e - UDMAP DMAengine driver - pm_runtime removed as NAVSS and it's components are always on - rchan_oes_offset added to MSI dommain allocation - Use the new PSI-L endpoint database for UDMAP configuration - Support for waiting for PDMA teardown completion on j721e instead of returning right away. depends on: https://lkml.org/lkml/2019/10/25/189 Not included in this series, but it is in the branch I have prepared. - psil-base is moved from DT to be part of udma_match_data - tr_thread maps is removed and using the PSI-L endpoint configuration for it - UDMAP glue layer - pm_runtime removed as NAVSS and it's components are always on - Use the new PSI-L endpoint database for UDMAP configuration Changes since v2 (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=152609&state=*) - Based on 5.4-rc1 - Support for Flow only data transfer for the glue layer - cppi5 header - comments converted to kernel-doc style - Remove the excessive WARN_ONs and rely on the user for sanity - new macro for checking TearDown Completion Message - ring accelerator driver - fixed up th commit message (SoB, TI-SCI) - fixed ring reset - CONFIG_TI_K3_RINGACC_DEBUG is removed along with the dbg_write/read functions and use dev_dbg() - k3_ringacc_ring_dump() is moved to static - step numbering removed from k3_ringacc_ring_reset_dma() - Add clarification comment for shared ring usage in k3_ringacc_ring_cfg() - Magic shift values in k3_ringacc_ring_cfg_proxy() got defined - K3_RINGACC_RING_MODE_QM is removed as it is not supported - UDMAP DT bindings - Fix property prefixing: s/pdma,/ti,pdma- - Add ti,notdpkt property to suppress teardown completion message on tchan - example updated accordingly - UDMAP DMAengine driver - Change __raw_readl/writel to readl/writel - Split up the udma_tisci_channel_config() into m2m, tx and rx tisci configuration functions for clarity - DT bindings change: s/pdma,/ti,pdma- - Cleanup of udma_tx_status(): - residue calculation fix for m2m - no need to read packet counter as it is not used - peer byte counter only available in PDMAs - Proper locking to avoid race with interrupt handler (polled m2m fix) - Support for ti,notdpkt - RFLOW management rework to support data movement without channel: - the channel is not controlled by Linux but other core and we only have rflows and rings to do the DMA transfers. This mode is only supported by the Glue layer for now. - UDMAP glue layer - Debug print improvements - Support for rflow/ring only data movement Changes since v1 (https://patchwork.kernel.org/project/linux-dmaengine/list/?series=114105&state=*) - Added support for j721e - Based on 5.3-rc2 - dropped ti_sci API patch for RM management as it is already upstream - dropped dmadev_get_slave_channel() patch, using __dma_request_channel() - Added Rob's Reviewed-by to ringacc DT binding document patch - DT bindings changes: - linux,udma-mode is gone, I have a simple lookup table in the driver to flag TR channels. - Support for j721e - Fix bug in of_node_put() handling in xlate function Changes since RFC (https://patchwork.kernel.org/cover/10612465/): - Based on linux-next (20190506) which now have the ti_sci interrupt support - The series can be applied and the UDMA via DMAengine API will be functional - Included in the series: ti_sci Resource management API, cppi5 header and driver for the ring accelerator. - The DMAengine core patches have been updated as per the review comments for earlier submittion. - The DMAengine driver patch is artificially split up to 6 smaller patches The k3-udma driver implements the Data Movement Architecture described in AM65x TRM (http://www.ti.com/lit/pdf/spruid7) and j721e TRM (http://www.ti.com/lit/pdf/spruil1) This DMA architecture is a big departure from 'traditional' architecture where we had either EDMA or sDMA as system DMA. Packet DMAs were used as dedicated DMAs to service only networking (Kesytone2) or USB (am335x) while other peripherals were serviced by EDMA. In AM65x/j721e the UDMA (Unified DMA) is used for all data movment within the SoC, tasked to service all peripherals (UART, McSPI, McASP, networking, etc). The NAVSS/UDMA is built around CPPI5 (Communications Port Programming Interface) and it supports Packet mode (similar to CPPI4.1 in Keystone2 for networking) and TR mode (similar to EDMA descriptor). The data movement is done within a PSI-L fabric, peripherals (including the UDMA-P) are not addressed by their I/O register as with traditional DMAs but with their PSI-L thread ID. In AM65x/j721e we have two main type of peripherals: Legacy: McASP, McSPI, UART, etc. to provide connectivity they are serviced by PDMA (Peripheral DMA) PDMA threads are locked to service a given peripheral, for example PSI-L thread 0x4400/0xc400 is to service McASP0 rx/tx. The PDMa configuration can be done via the UDMA Real Time Peer registers. Native: Networking, security accelerator these peripherals have native support for PSI-L. To be able to use the DMA the following generic steps need to be taken: - configure a DMA channel (tchan for TX, rchan for RX) - channel mode: Packet or TR mode - for memcpy a tchan and rchan pair is used. - for packet mode RX we also need to configure a receive flow to configure the packet receiption - the source and destination threads must be paired - at minimum one pair of rings need to be configured: - tx: transfer ring and transfer completion ring - rx: free descriptor ring and receive ring - two interrupts: UDMA-P channel interrupt and ring interrupt for tc_ring/r_ring - If the channel is in packet mode or configured to memcpy then we only need one interrupt from the ring, events from UDMAP is not used. When the channel setup is completed we only interract with the rings: - TX: push a descriptor to t_ring and wait for it to be pushed to the tc_ring by the UDMA-P - RX: push a descriptor to the fd_ring and waith for UDMA-P to push it back to the r_ring. Since we have FIFOs in the DMA fabric (UDMA-P, PSI-L and PDMA) which was not the case in previous DMAs we need to report the amount of data held in these FIFOs to clients (delay calculation for ALSA, UART FIFO flush support). Metadata support: DMAengine user driver was posted upstream based/tested on the v1 of the UDMA series: https://lkml.org/lkml/2019/6/28/20 SA2UL is using the metadata DMAengine API. Note on the last patch: In Keystone2 the networking had dedicated DMA (packet DMA) which is not the case anymore and the DMAengine API currently missing support for the features we would need to support networking, things like - support for receive descriptor 'classification' - we need to support several receive queues for a channel. - the queues are used for packet priority handling for example, but they can be used to have pools of descriptors for different sizes. - out of order completion of descriptors on a channel - when we have several queues to handle different priority packets the descriptors will be completed 'out-of-order' - NAPI type of operation (polling instead of interrupt driven transfer) - without this we can not sustain gigabit speeds and we need to support NAPI - not to limit this to networking, but other high performance operations It is my intention to work on these to be able to remove the 'glue' layer and switch to DMAengine API - or have an API aside of DMAengine to have generic way to support networking, but given how controversial and not trivial these changes are we need something to support networking. The series (+DT patches to enabled DMA on AM65x and j721e) on top of 5.5-rc1 is available: https://github.com/omap-audio/linux-audio.git peter/udma/series_v7-5.5-rc1 Regards, Peter --- Grygorii Strashko (3): bindings: soc: ti: add documentation for k3 ringacc soc: ti: k3: add navss ringacc driver dmaengine: ti: k3-udma: Add glue layer for non DMAengine users Peter Ujfalusi (9): dmaengine: doc: Add sections for per descriptor metadata support dmaengine: Add metadata_ops for dma_async_tx_descriptor dmaengine: Add support for reporting DMA cached data amount dmaengine: ti: Add cppi5 header for K3 NAVSS/UDMA dmaengine: ti: k3 PSI-L remote endpoint configuration dt-bindings: dma: ti: Add document for K3 UDMA dmaengine: ti: New driver for K3 UDMA firmware: ti_sci: rm: Add support for tx_tdtype parameter for tx channel dmaengine: ti: k3-udma: Wait for peer teardown completion if supported .../devicetree/bindings/dma/ti/k3-udma.yaml | 185 + .../devicetree/bindings/soc/ti/k3-ringacc.txt | 59 + Documentation/driver-api/dmaengine/client.rst | 75 + .../driver-api/dmaengine/provider.rst | 46 + drivers/dma/dmaengine.c | 73 + drivers/dma/dmaengine.h | 8 + drivers/dma/ti/Kconfig | 24 + drivers/dma/ti/Makefile | 3 + drivers/dma/ti/k3-psil-am654.c | 175 + drivers/dma/ti/k3-psil-j721e.c | 222 ++ drivers/dma/ti/k3-psil-priv.h | 39 + drivers/dma/ti/k3-psil.c | 97 + drivers/dma/ti/k3-udma-glue.c | 1198 ++++++ drivers/dma/ti/k3-udma-private.c | 133 + drivers/dma/ti/k3-udma.c | 3452 +++++++++++++++++ drivers/dma/ti/k3-udma.h | 151 + drivers/firmware/ti_sci.c | 1 + drivers/firmware/ti_sci.h | 7 + drivers/soc/ti/Kconfig | 11 + drivers/soc/ti/Makefile | 1 + drivers/soc/ti/k3-ringacc.c | 1180 ++++++ include/linux/dma/k3-psil.h | 71 + include/linux/dma/k3-udma-glue.h | 134 + include/linux/dma/ti-cppi5.h | 1061 +++++ include/linux/dmaengine.h | 110 + include/linux/soc/ti/k3-ringacc.h | 244 ++ include/linux/soc/ti/ti_sci_protocol.h | 2 + 27 files changed, 8762 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/ti/k3-udma.yaml create mode 100644 Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt create mode 100644 drivers/dma/ti/k3-psil-am654.c create mode 100644 drivers/dma/ti/k3-psil-j721e.c create mode 100644 drivers/dma/ti/k3-psil-priv.h create mode 100644 drivers/dma/ti/k3-psil.c create mode 100644 drivers/dma/ti/k3-udma-glue.c create mode 100644 drivers/dma/ti/k3-udma-private.c create mode 100644 drivers/dma/ti/k3-udma.c create mode 100644 drivers/dma/ti/k3-udma.h create mode 100644 drivers/soc/ti/k3-ringacc.c create mode 100644 include/linux/dma/k3-psil.h create mode 100644 include/linux/dma/k3-udma-glue.h create mode 100644 include/linux/dma/ti-cppi5.h create mode 100644 include/linux/soc/ti/k3-ringacc.h