| Message ID | 20191211194624.2872-14-jae.hyun.yoo@linux.intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | PECI device driver introduction | expand |
On 12/11/19 11:46 AM, Jae Hyun Yoo wrote: > This commit adds PECI cputemp hwmon driver. > > Cc: Guenter Roeck <linux@roeck-us.net> > Cc: Jean Delvare <jdelvare@suse.com> > Cc: Alan Cox <alan@linux.intel.com> > Cc: Andrew Jeffery <andrew@aj.id.au> > Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > Cc: Arnd Bergmann <arnd@arndb.de> > Cc: Jason M Biils <jason.m.bills@linux.intel.com> > Cc: Joel Stanley <joel@jms.id.au> > Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> > Cc: Andrew Lunn <andrew@lunn.ch> > Cc: Stef van Os <stef.van.os@prodrive-technologies.com> > Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> > Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com> > Reviewed-by: James Feist <james.feist@linux.intel.com> > Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com> > Acked-by: Guenter Roeck <linux@roeck-us.net> > --- > Changes since v10: > - Added Skylake Xeon D support. > - Added DTS temperature which is more thermal control friendlier than Die > temperature. > - Fixed minor bugs and style issues. > > drivers/hwmon/Kconfig | 14 ++ > drivers/hwmon/Makefile | 1 + > drivers/hwmon/peci-cputemp.c | 448 +++++++++++++++++++++++++++++++++++ > drivers/hwmon/peci-hwmon.h | 46 ++++ > 4 files changed, 509 insertions(+) > create mode 100644 drivers/hwmon/peci-cputemp.c > create mode 100644 drivers/hwmon/peci-hwmon.h > > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index 23dfe848979a..b6604759579c 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -1349,6 +1349,20 @@ config SENSORS_PCF8591 > These devices are hard to detect and rarely found on mainstream > hardware. If unsure, say N. > > +config SENSORS_PECI_CPUTEMP > + tristate "PECI CPU temperature monitoring client" > + depends on PECI > + select MFD_INTEL_PECI_CLIENT > + help > + If you say yes here you get support for the generic Intel PECI > + cputemp driver which provides Digital Thermal Sensor (DTS) thermal > + readings of the CPU package and CPU cores that are accessible using > + the PECI Client Command Suite via the processor PECI client. > + Check <file:Documentation/hwmon/peci-cputemp.rst> for details. > + > + This driver can also be built as a module. If so, the module > + will be called peci-cputemp. > + > source "drivers/hwmon/pmbus/Kconfig" > > config SENSORS_PWM_FAN > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > index 6db5db9cdc29..d6fea48697af 100644 > --- a/drivers/hwmon/Makefile > +++ b/drivers/hwmon/Makefile > @@ -144,6 +144,7 @@ obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o > obj-$(CONFIG_SENSORS_PC87360) += pc87360.o > obj-$(CONFIG_SENSORS_PC87427) += pc87427.o > obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o > +obj-$(CONFIG_SENSORS_PECI_CPUTEMP) += peci-cputemp.o > obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o > obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o > obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o > diff --git a/drivers/hwmon/peci-cputemp.c b/drivers/hwmon/peci-cputemp.c > new file mode 100644 > index 000000000000..70ced9f9299f > --- /dev/null > +++ b/drivers/hwmon/peci-cputemp.c > @@ -0,0 +1,448 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// Copyright (c) 2018-2019 Intel Corporation > + > +#include <linux/hwmon.h> > +#include <linux/jiffies.h> > +#include <linux/mfd/intel-peci-client.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > +#include <linux/platform_device.h> > +#include "peci-hwmon.h" > + > +#define DEFAULT_CHANNEL_NUMS 5 > +#define CORETEMP_CHANNEL_NUMS CORE_NUMS_MAX Why not just use CORE_NUMS_MAX ? > +#define CPUTEMP_CHANNEL_NUMS (DEFAULT_CHANNEL_NUMS + CORETEMP_CHANNEL_NUMS) > + > +struct temp_group { > + struct peci_sensor_data die; > + struct peci_sensor_data dts; > + struct peci_sensor_data tcontrol; > + struct peci_sensor_data tthrottle; > + struct peci_sensor_data tjmax; > + struct peci_sensor_data core[CORETEMP_CHANNEL_NUMS]; > +}; > + > +struct peci_cputemp { > + struct peci_client_manager *mgr; > + struct device *dev; > + char name[PECI_NAME_SIZE]; > + const struct cpu_gen_info *gen_info; > + struct temp_group temp; > + u64 core_mask; > + u32 temp_config[CPUTEMP_CHANNEL_NUMS + 1]; > + uint config_idx; > + struct hwmon_channel_info temp_info; > + const struct hwmon_channel_info *info[2]; > + struct hwmon_chip_info chip; > +}; > + > +enum cputemp_channels { > + channel_die, > + channel_dts, > + channel_tcontrol, > + channel_tthrottle, > + channel_tjmax, > + channel_core, > +}; > + > +static const u32 config_table[DEFAULT_CHANNEL_NUMS + 1] = { > + /* Die temperature */ > + HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | > + HWMON_T_CRIT_HYST, > + > + /* DTS margin */ > + HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | > + HWMON_T_CRIT_HYST, > + > + /* Tcontrol temperature */ > + HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_CRIT, > + > + /* Tthrottle temperature */ > + HWMON_T_LABEL | HWMON_T_INPUT, > + > + /* Tjmax temperature */ > + HWMON_T_LABEL | HWMON_T_INPUT, > + > + /* Core temperature - for all core channels */ > + HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | > + HWMON_T_CRIT_HYST, > +}; > + > +static const char *cputemp_label[CPUTEMP_CHANNEL_NUMS] = { > + "Die", > + "DTS", > + "Tcontrol", > + "Tthrottle", > + "Tjmax", > + "Core 0", "Core 1", "Core 2", "Core 3", > + "Core 4", "Core 5", "Core 6", "Core 7", > + "Core 8", "Core 9", "Core 10", "Core 11", > + "Core 12", "Core 13", "Core 14", "Core 15", > + "Core 16", "Core 17", "Core 18", "Core 19", > + "Core 20", "Core 21", "Core 22", "Core 23", > + "Core 24", "Core 25", "Core 26", "Core 27", > +}; > + What happens if CPUTEMP_CHANNEL_NUMS is increased in the future, and some of this array includes NULL pointers because this file doesn't track CORE_NUMS_MAX ? > +static s32 ten_dot_six_to_millidegree(s32 val) > +{ > + return ((val ^ 0x8000) - 0x8000) * 1000 / 64; Normally I suggest to use DIV_ROUND_CLOSEST in situations like this to improve rounding, but ultimately that is your call. > +} > + > +static int get_temp_targets(struct peci_cputemp *priv) > +{ > + s32 tthrottle_offset; > + s32 tcontrol_margin; > + u8 pkg_cfg[4]; > + int ret; > + > + /* > + * Just use only the tcontrol marker to determine if target values need > + * update. > + */ > + if (!peci_sensor_need_update(&priv->temp.tcontrol)) > + return 0; > + > + ret = peci_client_read_package_config(priv->mgr, > + PECI_MBX_INDEX_TEMP_TARGET, 0, > + pkg_cfg); > + if (ret) > + return ret; > + > + priv->temp.tjmax.value = pkg_cfg[2] * 1000; > + > + tcontrol_margin = pkg_cfg[1]; > + tcontrol_margin = ((tcontrol_margin ^ 0x80) - 0x80) * 1000; > + priv->temp.tcontrol.value = priv->temp.tjmax.value - tcontrol_margin; > + > + tthrottle_offset = (pkg_cfg[3] & 0x2f) * 1000; > + priv->temp.tthrottle.value = priv->temp.tjmax.value - tthrottle_offset; > + > + peci_sensor_mark_updated(&priv->temp.tcontrol); > + > + return 0; > +} > + > +static int get_die_temp(struct peci_cputemp *priv) > +{ > + struct peci_get_temp_msg msg; > + int ret; > + > + if (!peci_sensor_need_update(&priv->temp.die)) > + return 0; > + > + msg.addr = priv->mgr->client->addr; > + > + ret = peci_command(priv->mgr->client->adapter, PECI_CMD_GET_TEMP, &msg); > + if (ret) > + return ret; > + > + /* Note that the tjmax should be available before calling it */ > + priv->temp.die.value = priv->temp.tjmax.value + > + (msg.temp_raw * 1000 / 64); > + > + peci_sensor_mark_updated(&priv->temp.die); > + > + return 0; > +} > + > +static int get_dts(struct peci_cputemp *priv) > +{ > + s32 dts_margin; > + u8 pkg_cfg[4]; > + int ret; > + > + if (!peci_sensor_need_update(&priv->temp.dts)) > + return 0; > + > + ret = peci_client_read_package_config(priv->mgr, > + PECI_MBX_INDEX_DTS_MARGIN, 0, > + pkg_cfg); > + > + if (ret) > + return ret; > + > + dts_margin = (pkg_cfg[1] << 8) | pkg_cfg[0]; > + > + /** > + * Processors return a value of DTS reading in 10.6 format > + * (10 bits signed decimal, 6 bits fractional). > + * Error codes: > + * 0x8000: General sensor error > + * 0x8001: Reserved > + * 0x8002: Underflow on reading value > + * 0x8003-0x81ff: Reserved > + */ > + if (dts_margin >= 0x8000 && dts_margin <= 0x81ff) > + return -EIO; > + > + dts_margin = ten_dot_six_to_millidegree(dts_margin); > + > + /* Note that the tcontrol should be available before calling it */ > + priv->temp.dts.value = priv->temp.tcontrol.value - dts_margin; > + > + peci_sensor_mark_updated(&priv->temp.dts); > + > + return 0; > +} > + > +static int get_core_temp(struct peci_cputemp *priv, int core_index) > +{ > + s32 core_dts_margin; > + u8 pkg_cfg[4]; > + int ret; > + > + if (!peci_sensor_need_update(&priv->temp.core[core_index])) > + return 0; > + > + ret = peci_client_read_package_config(priv->mgr, > + PECI_MBX_INDEX_PER_CORE_DTS_TEMP, > + core_index, pkg_cfg); > + if (ret) > + return ret; > + > + core_dts_margin = le16_to_cpup((__le16 *)pkg_cfg); > + Any special readon for using the helper function here but not above ? > + /* > + * Processors return a value of the core DTS reading in 10.6 format > + * (10 bits signed decimal, 6 bits fractional). > + * Error codes: > + * 0x8000: General sensor error > + * 0x8001: Reserved > + * 0x8002: Underflow on reading value > + * 0x8003-0x81ff: Reserved > + */ > + if (core_dts_margin >= 0x8000 && core_dts_margin <= 0x81ff) > + return -EIO; > + > + core_dts_margin = ten_dot_six_to_millidegree(core_dts_margin); > + > + /* Note that the tjmax should be available before calling it */ > + priv->temp.core[core_index].value = priv->temp.tjmax.value + > + core_dts_margin; > + > + peci_sensor_mark_updated(&priv->temp.core[core_index]); > + > + return 0; > +} > + > +static int cputemp_read_string(struct device *dev, > + enum hwmon_sensor_types type, > + u32 attr, int channel, const char **str) > +{ > + if (attr != hwmon_temp_label) > + return -EOPNOTSUPP; > + > + *str = cputemp_label[channel]; > + > + return 0; > +} > + > +static int cputemp_read(struct device *dev, > + enum hwmon_sensor_types type, > + u32 attr, int channel, long *val) > +{ > + struct peci_cputemp *priv = dev_get_drvdata(dev); > + int ret, core_index; > + > + if (channel >= CPUTEMP_CHANNEL_NUMS || > + !(priv->temp_config[channel] & BIT(attr))) > + return -EOPNOTSUPP; > + > + ret = get_temp_targets(priv); > + if (ret) > + return ret; > + > + switch (attr) { > + case hwmon_temp_input: > + switch (channel) { > + case channel_die: > + ret = get_die_temp(priv); > + if (ret) > + break; > + > + *val = priv->temp.die.value; > + break; > + case channel_dts: > + ret = get_dts(priv); > + if (ret) > + break; > + > + *val = priv->temp.dts.value; > + break; > + case channel_tcontrol: > + *val = priv->temp.tcontrol.value; > + break; > + case channel_tthrottle: > + *val = priv->temp.tthrottle.value; > + break; > + case channel_tjmax: > + *val = priv->temp.tjmax.value; > + break; > + default: > + core_index = channel - DEFAULT_CHANNEL_NUMS; > + ret = get_core_temp(priv, core_index); > + if (ret) > + break; > + > + *val = priv->temp.core[core_index].value; > + break; > + } > + break; > + case hwmon_temp_max: > + *val = priv->temp.tcontrol.value; > + break; > + case hwmon_temp_crit: > + *val = priv->temp.tjmax.value; > + break; > + case hwmon_temp_crit_hyst: > + *val = priv->temp.tjmax.value - priv->temp.tcontrol.value; > + break; > + default: > + ret = -EOPNOTSUPP; > + break; > + } > + > + return ret; > +} > + > +static umode_t cputemp_is_visible(const void *data, > + enum hwmon_sensor_types type, > + u32 attr, int channel) > +{ > + const struct peci_cputemp *priv = data; > + > + if (channel < ARRAY_SIZE(priv->temp_config) && > + (priv->temp_config[channel] & BIT(attr)) && > + (channel < DEFAULT_CHANNEL_NUMS || > + (channel >= DEFAULT_CHANNEL_NUMS && > + (priv->core_mask & BIT(channel - DEFAULT_CHANNEL_NUMS))))) > + return 0444; > + > + return 0; > +} > + > +static const struct hwmon_ops cputemp_ops = { > + .is_visible = cputemp_is_visible, > + .read_string = cputemp_read_string, > + .read = cputemp_read, > +}; > + > +static int check_resolved_cores(struct peci_cputemp *priv) > +{ > + struct peci_rd_pci_cfg_local_msg msg; > + int ret; > + > + /* Get the RESOLVED_CORES register value */ > + msg.addr = priv->mgr->client->addr; > + msg.device = 30; > + msg.function = 3; > + msg.rx_len = 4; > + msg.bus = 1; > + msg.reg = 0xb4; > + > + ret = peci_command(priv->mgr->client->adapter, > + PECI_CMD_RD_PCI_CFG_LOCAL, &msg); > + if (msg.cc != PECI_DEV_CC_SUCCESS) > + ret = -EAGAIN; > + if (ret) > + return ret; > + > + priv->core_mask = le32_to_cpup((__le32 *)msg.pci_config); > + if (!priv->core_mask) > + return -EAGAIN; > + > + dev_dbg(priv->dev, "Scanned resolved cores: 0x%llx\n", priv->core_mask); > + > + return 0; > +} > + > +static int create_core_temp_info(struct peci_cputemp *priv) > +{ > + int ret, i; > + > + ret = check_resolved_cores(priv); > + if (ret) > + return ret; > + > + for (i = 0; i < priv->gen_info->core_max; i++) > + if (priv->core_mask & BIT(i)) > + while (priv->config_idx <= i + DEFAULT_CHANNEL_NUMS) > + priv->temp_config[priv->config_idx++] = > + config_table[channel_core]; > + > + return 0; > +} > + > +static int peci_cputemp_probe(struct platform_device *pdev) > +{ > + struct peci_client_manager *mgr = dev_get_drvdata(pdev->dev.parent); > + struct device *dev = &pdev->dev; > + struct peci_cputemp *priv; > + struct device *hwmon_dev; > + int ret; > + > + if ((mgr->client->adapter->cmd_mask & > + (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) != > + (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) > + return -ENODEV; > + > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); > + if (!priv) > + return -ENOMEM; > + > + dev_set_drvdata(dev, priv); > + priv->mgr = mgr; > + priv->dev = dev; > + priv->gen_info = mgr->gen_info; > + > + snprintf(priv->name, PECI_NAME_SIZE, "peci_cputemp.cpu%d", > + mgr->client->addr - PECI_BASE_ADDR); > + > + priv->temp_config[priv->config_idx++] = config_table[channel_die]; > + priv->temp_config[priv->config_idx++] = config_table[channel_dts]; > + priv->temp_config[priv->config_idx++] = config_table[channel_tcontrol]; > + priv->temp_config[priv->config_idx++] = config_table[channel_tthrottle]; > + priv->temp_config[priv->config_idx++] = config_table[channel_tjmax]; > + > + ret = create_core_temp_info(priv); > + if (ret) > + dev_dbg(dev, "Skipped creating core temp info\n"); > + > + priv->chip.ops = &cputemp_ops; > + priv->chip.info = priv->info; > + > + priv->info[0] = &priv->temp_info; > + > + priv->temp_info.type = hwmon_temp; > + priv->temp_info.config = priv->temp_config; > + > + hwmon_dev = devm_hwmon_device_register_with_info(priv->dev, > + priv->name, > + priv, > + &priv->chip, > + NULL); > + > + if (IS_ERR(hwmon_dev)) > + return PTR_ERR(hwmon_dev); > + > + dev_dbg(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev), priv->name); > + > + return 0; > +} > + > +static const struct platform_device_id peci_cputemp_ids[] = { > + { .name = "peci-cputemp", .driver_data = 0 }, > + { } > +}; > +MODULE_DEVICE_TABLE(platform, peci_cputemp_ids); > + > +static struct platform_driver peci_cputemp_driver = { > + .probe = peci_cputemp_probe, > + .id_table = peci_cputemp_ids, > + .driver = { .name = KBUILD_MODNAME, }, > +}; > +module_platform_driver(peci_cputemp_driver); > + > +MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>"); > +MODULE_DESCRIPTION("PECI cputemp driver"); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/hwmon/peci-hwmon.h b/drivers/hwmon/peci-hwmon.h > new file mode 100644 > index 000000000000..e0e3c901c6e4 > --- /dev/null > +++ b/drivers/hwmon/peci-hwmon.h > @@ -0,0 +1,46 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* Copyright (c) 2018-2019 Intel Corporation */ > + > +#ifndef __PECI_HWMON_H > +#define __PECI_HWMON_H > + > +#include <linux/peci.h> > + > +#define TEMP_TYPE_PECI 6 /* Sensor type 6: Intel PECI */ > +#define UPDATE_INTERVAL HZ > + > +/** > + * struct peci_sensor_data - PECI sensor information > + * @valid: flag to indicate the sensor value is valid > + * @value: sensor value in millidegree Celsius > + * @last_updated: time of the last update in jiffies > + */ > +struct peci_sensor_data { > + uint valid; > + s32 value; > + ulong last_updated; > +}; > + > +/** > + * peci_sensor_need_update - check whether sensor update is needed or not > + * @sensor: pointer to sensor data struct > + * > + * Return: true if update is needed, false if not. > + */ > +static inline bool peci_sensor_need_update(struct peci_sensor_data *sensor) > +{ > + return !sensor->valid || > + time_after(jiffies, sensor->last_updated + UPDATE_INTERVAL); > +} > + > +/** > + * peci_sensor_mark_updated - mark the sensor is updated > + * @sensor: pointer to sensor data struct > + */ > +static inline void peci_sensor_mark_updated(struct peci_sensor_data *sensor) > +{ > + sensor->valid = 1; > + sensor->last_updated = jiffies; > +} > + > +#endif /* __PECI_HWMON_H */ >
Hi Guenter, On 12/12/2019 10:24 PM, Guenter Roeck wrote: > On 12/11/19 11:46 AM, Jae Hyun Yoo wrote: >> This commit adds PECI cputemp hwmon driver. >> >> Cc: Guenter Roeck <linux@roeck-us.net> >> Cc: Jean Delvare <jdelvare@suse.com> >> Cc: Alan Cox <alan@linux.intel.com> >> Cc: Andrew Jeffery <andrew@aj.id.au> >> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> >> Cc: Arnd Bergmann <arnd@arndb.de> >> Cc: Jason M Biils <jason.m.bills@linux.intel.com> >> Cc: Joel Stanley <joel@jms.id.au> >> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> >> Cc: Andrew Lunn <andrew@lunn.ch> >> Cc: Stef van Os <stef.van.os@prodrive-technologies.com> >> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> >> Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com> >> Reviewed-by: James Feist <james.feist@linux.intel.com> >> Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com> >> Acked-by: Guenter Roeck <linux@roeck-us.net> >> --- >> Changes since v10: >> - Added Skylake Xeon D support. >> - Added DTS temperature which is more thermal control friendlier than Die >> temperature. >> - Fixed minor bugs and style issues. >> >> drivers/hwmon/Kconfig | 14 ++ >> drivers/hwmon/Makefile | 1 + >> drivers/hwmon/peci-cputemp.c | 448 +++++++++++++++++++++++++++++++++++ >> drivers/hwmon/peci-hwmon.h | 46 ++++ >> 4 files changed, 509 insertions(+) >> create mode 100644 drivers/hwmon/peci-cputemp.c >> create mode 100644 drivers/hwmon/peci-hwmon.h >> >> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig >> index 23dfe848979a..b6604759579c 100644 >> --- a/drivers/hwmon/Kconfig >> +++ b/drivers/hwmon/Kconfig >> @@ -1349,6 +1349,20 @@ config SENSORS_PCF8591 >> These devices are hard to detect and rarely found on mainstream >> hardware. If unsure, say N. >> +config SENSORS_PECI_CPUTEMP >> + tristate "PECI CPU temperature monitoring client" >> + depends on PECI >> + select MFD_INTEL_PECI_CLIENT >> + help >> + If you say yes here you get support for the generic Intel PECI >> + cputemp driver which provides Digital Thermal Sensor (DTS) thermal >> + readings of the CPU package and CPU cores that are accessible >> using >> + the PECI Client Command Suite via the processor PECI client. >> + Check <file:Documentation/hwmon/peci-cputemp.rst> for details. >> + >> + This driver can also be built as a module. If so, the module >> + will be called peci-cputemp. >> + >> source "drivers/hwmon/pmbus/Kconfig" >> config SENSORS_PWM_FAN >> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile >> index 6db5db9cdc29..d6fea48697af 100644 >> --- a/drivers/hwmon/Makefile >> +++ b/drivers/hwmon/Makefile >> @@ -144,6 +144,7 @@ obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += >> ntc_thermistor.o >> obj-$(CONFIG_SENSORS_PC87360) += pc87360.o >> obj-$(CONFIG_SENSORS_PC87427) += pc87427.o >> obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o >> +obj-$(CONFIG_SENSORS_PECI_CPUTEMP) += peci-cputemp.o >> obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o >> obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o >> obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o >> diff --git a/drivers/hwmon/peci-cputemp.c b/drivers/hwmon/peci-cputemp.c >> new file mode 100644 >> index 000000000000..70ced9f9299f >> --- /dev/null >> +++ b/drivers/hwmon/peci-cputemp.c >> @@ -0,0 +1,448 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +// Copyright (c) 2018-2019 Intel Corporation >> + >> +#include <linux/hwmon.h> >> +#include <linux/jiffies.h> >> +#include <linux/mfd/intel-peci-client.h> >> +#include <linux/module.h> >> +#include <linux/of_device.h> >> +#include <linux/platform_device.h> >> +#include "peci-hwmon.h" >> + >> +#define DEFAULT_CHANNEL_NUMS 5 >> +#define CORETEMP_CHANNEL_NUMS CORE_NUMS_MAX > > Why not just use CORE_NUMS_MAX ? For better readability in below code to represent max core numbers as core temp channel numbers. If you don't like it, I'll use CORE_NUMS_MAX as it is for the core temp channel numbers. >> +#define CPUTEMP_CHANNEL_NUMS (DEFAULT_CHANNEL_NUMS + >> CORETEMP_CHANNEL_NUMS) >> + >> +struct temp_group { >> + struct peci_sensor_data die; >> + struct peci_sensor_data dts; >> + struct peci_sensor_data tcontrol; >> + struct peci_sensor_data tthrottle; >> + struct peci_sensor_data tjmax; >> + struct peci_sensor_data core[CORETEMP_CHANNEL_NUMS]; >> +}; >> + >> +struct peci_cputemp { >> + struct peci_client_manager *mgr; >> + struct device *dev; >> + char name[PECI_NAME_SIZE]; >> + const struct cpu_gen_info *gen_info; >> + struct temp_group temp; >> + u64 core_mask; >> + u32 temp_config[CPUTEMP_CHANNEL_NUMS + 1]; >> + uint config_idx; >> + struct hwmon_channel_info temp_info; >> + const struct hwmon_channel_info *info[2]; >> + struct hwmon_chip_info chip; >> +}; >> + >> +enum cputemp_channels { >> + channel_die, >> + channel_dts, >> + channel_tcontrol, >> + channel_tthrottle, >> + channel_tjmax, >> + channel_core, >> +}; >> + >> +static const u32 config_table[DEFAULT_CHANNEL_NUMS + 1] = { >> + /* Die temperature */ >> + HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | >> + HWMON_T_CRIT_HYST, >> + >> + /* DTS margin */ >> + HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | >> + HWMON_T_CRIT_HYST, >> + >> + /* Tcontrol temperature */ >> + HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_CRIT, >> + >> + /* Tthrottle temperature */ >> + HWMON_T_LABEL | HWMON_T_INPUT, >> + >> + /* Tjmax temperature */ >> + HWMON_T_LABEL | HWMON_T_INPUT, >> + >> + /* Core temperature - for all core channels */ >> + HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | >> + HWMON_T_CRIT_HYST, >> +}; >> + >> +static const char *cputemp_label[CPUTEMP_CHANNEL_NUMS] = { >> + "Die", >> + "DTS", >> + "Tcontrol", >> + "Tthrottle", >> + "Tjmax", >> + "Core 0", "Core 1", "Core 2", "Core 3", >> + "Core 4", "Core 5", "Core 6", "Core 7", >> + "Core 8", "Core 9", "Core 10", "Core 11", >> + "Core 12", "Core 13", "Core 14", "Core 15", >> + "Core 16", "Core 17", "Core 18", "Core 19", >> + "Core 20", "Core 21", "Core 22", "Core 23", >> + "Core 24", "Core 25", "Core 26", "Core 27", >> +}; >> + > > What happens if CPUTEMP_CHANNEL_NUMS is increased in the future, > and some of this array includes NULL pointers because this file > doesn't track CORE_NUMS_MAX ? Okay. It's reasonable concern. I'll fix it to make this driver generate the core temp label strings dynamically based on detected CPU generation information. >> +static s32 ten_dot_six_to_millidegree(s32 val) >> +{ >> + return ((val ^ 0x8000) - 0x8000) * 1000 / 64; > > Normally I suggest to use DIV_ROUND_CLOSEST in situations like this > to improve rounding, but ultimately that is your call. This is for conversion of 16-bit signed 10.6 (10 bits signed decimal, 6 bits fractional) format to 32-bits signed integer in millidegree units. It's right as it is. >> +} >> + >> +static int get_temp_targets(struct peci_cputemp *priv) >> +{ >> + s32 tthrottle_offset; >> + s32 tcontrol_margin; >> + u8 pkg_cfg[4]; >> + int ret; >> + >> + /* >> + * Just use only the tcontrol marker to determine if target >> values need >> + * update. >> + */ >> + if (!peci_sensor_need_update(&priv->temp.tcontrol)) >> + return 0; >> + >> + ret = peci_client_read_package_config(priv->mgr, >> + PECI_MBX_INDEX_TEMP_TARGET, 0, >> + pkg_cfg); >> + if (ret) >> + return ret; >> + >> + priv->temp.tjmax.value = pkg_cfg[2] * 1000; >> + >> + tcontrol_margin = pkg_cfg[1]; >> + tcontrol_margin = ((tcontrol_margin ^ 0x80) - 0x80) * 1000; >> + priv->temp.tcontrol.value = priv->temp.tjmax.value - >> tcontrol_margin; >> + >> + tthrottle_offset = (pkg_cfg[3] & 0x2f) * 1000; >> + priv->temp.tthrottle.value = priv->temp.tjmax.value - >> tthrottle_offset; >> + >> + peci_sensor_mark_updated(&priv->temp.tcontrol); >> + >> + return 0; >> +} >> + >> +static int get_die_temp(struct peci_cputemp *priv) >> +{ >> + struct peci_get_temp_msg msg; >> + int ret; >> + >> + if (!peci_sensor_need_update(&priv->temp.die)) >> + return 0; >> + >> + msg.addr = priv->mgr->client->addr; >> + >> + ret = peci_command(priv->mgr->client->adapter, PECI_CMD_GET_TEMP, >> &msg); >> + if (ret) >> + return ret; >> + >> + /* Note that the tjmax should be available before calling it */ >> + priv->temp.die.value = priv->temp.tjmax.value + >> + (msg.temp_raw * 1000 / 64); >> + >> + peci_sensor_mark_updated(&priv->temp.die); >> + >> + return 0; >> +} >> + >> +static int get_dts(struct peci_cputemp *priv) >> +{ >> + s32 dts_margin; >> + u8 pkg_cfg[4]; >> + int ret; >> + >> + if (!peci_sensor_need_update(&priv->temp.dts)) >> + return 0; >> + >> + ret = peci_client_read_package_config(priv->mgr, >> + PECI_MBX_INDEX_DTS_MARGIN, 0, >> + pkg_cfg); >> + >> + if (ret) >> + return ret; >> + >> + dts_margin = (pkg_cfg[1] << 8) | pkg_cfg[0]; >> + >> + /** >> + * Processors return a value of DTS reading in 10.6 format >> + * (10 bits signed decimal, 6 bits fractional). >> + * Error codes: >> + * 0x8000: General sensor error >> + * 0x8001: Reserved >> + * 0x8002: Underflow on reading value >> + * 0x8003-0x81ff: Reserved >> + */ >> + if (dts_margin >= 0x8000 && dts_margin <= 0x81ff) >> + return -EIO; >> + >> + dts_margin = ten_dot_six_to_millidegree(dts_margin); >> + >> + /* Note that the tcontrol should be available before calling it */ >> + priv->temp.dts.value = priv->temp.tcontrol.value - dts_margin; >> + >> + peci_sensor_mark_updated(&priv->temp.dts); >> + >> + return 0; >> +} >> + >> +static int get_core_temp(struct peci_cputemp *priv, int core_index) >> +{ >> + s32 core_dts_margin; >> + u8 pkg_cfg[4]; >> + int ret; >> + >> + if (!peci_sensor_need_update(&priv->temp.core[core_index])) >> + return 0; >> + >> + ret = peci_client_read_package_config(priv->mgr, >> + PECI_MBX_INDEX_PER_CORE_DTS_TEMP, >> + core_index, pkg_cfg); >> + if (ret) >> + return ret; >> + >> + core_dts_margin = le16_to_cpup((__le16 *)pkg_cfg); >> + > > Any special readon for using the helper function here but not > above ? Ah, I have to use le16_to_cpup for the above one too. Thanks! Thanks a lot for your review! -Jae
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 23dfe848979a..b6604759579c 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1349,6 +1349,20 @@ config SENSORS_PCF8591 These devices are hard to detect and rarely found on mainstream hardware. If unsure, say N. +config SENSORS_PECI_CPUTEMP + tristate "PECI CPU temperature monitoring client" + depends on PECI + select MFD_INTEL_PECI_CLIENT + help + If you say yes here you get support for the generic Intel PECI + cputemp driver which provides Digital Thermal Sensor (DTS) thermal + readings of the CPU package and CPU cores that are accessible using + the PECI Client Command Suite via the processor PECI client. + Check <file:Documentation/hwmon/peci-cputemp.rst> for details. + + This driver can also be built as a module. If so, the module + will be called peci-cputemp. + source "drivers/hwmon/pmbus/Kconfig" config SENSORS_PWM_FAN diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 6db5db9cdc29..d6fea48697af 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -144,6 +144,7 @@ obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o obj-$(CONFIG_SENSORS_PC87360) += pc87360.o obj-$(CONFIG_SENSORS_PC87427) += pc87427.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o +obj-$(CONFIG_SENSORS_PECI_CPUTEMP) += peci-cputemp.o obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o diff --git a/drivers/hwmon/peci-cputemp.c b/drivers/hwmon/peci-cputemp.c new file mode 100644 index 000000000000..70ced9f9299f --- /dev/null +++ b/drivers/hwmon/peci-cputemp.c @@ -0,0 +1,448 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018-2019 Intel Corporation + +#include <linux/hwmon.h> +#include <linux/jiffies.h> +#include <linux/mfd/intel-peci-client.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include "peci-hwmon.h" + +#define DEFAULT_CHANNEL_NUMS 5 +#define CORETEMP_CHANNEL_NUMS CORE_NUMS_MAX +#define CPUTEMP_CHANNEL_NUMS (DEFAULT_CHANNEL_NUMS + CORETEMP_CHANNEL_NUMS) + +struct temp_group { + struct peci_sensor_data die; + struct peci_sensor_data dts; + struct peci_sensor_data tcontrol; + struct peci_sensor_data tthrottle; + struct peci_sensor_data tjmax; + struct peci_sensor_data core[CORETEMP_CHANNEL_NUMS]; +}; + +struct peci_cputemp { + struct peci_client_manager *mgr; + struct device *dev; + char name[PECI_NAME_SIZE]; + const struct cpu_gen_info *gen_info; + struct temp_group temp; + u64 core_mask; + u32 temp_config[CPUTEMP_CHANNEL_NUMS + 1]; + uint config_idx; + struct hwmon_channel_info temp_info; + const struct hwmon_channel_info *info[2]; + struct hwmon_chip_info chip; +}; + +enum cputemp_channels { + channel_die, + channel_dts, + channel_tcontrol, + channel_tthrottle, + channel_tjmax, + channel_core, +}; + +static const u32 config_table[DEFAULT_CHANNEL_NUMS + 1] = { + /* Die temperature */ + HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | + HWMON_T_CRIT_HYST, + + /* DTS margin */ + HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | + HWMON_T_CRIT_HYST, + + /* Tcontrol temperature */ + HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_CRIT, + + /* Tthrottle temperature */ + HWMON_T_LABEL | HWMON_T_INPUT, + + /* Tjmax temperature */ + HWMON_T_LABEL | HWMON_T_INPUT, + + /* Core temperature - for all core channels */ + HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | + HWMON_T_CRIT_HYST, +}; + +static const char *cputemp_label[CPUTEMP_CHANNEL_NUMS] = { + "Die", + "DTS", + "Tcontrol", + "Tthrottle", + "Tjmax", + "Core 0", "Core 1", "Core 2", "Core 3", + "Core 4", "Core 5", "Core 6", "Core 7", + "Core 8", "Core 9", "Core 10", "Core 11", + "Core 12", "Core 13", "Core 14", "Core 15", + "Core 16", "Core 17", "Core 18", "Core 19", + "Core 20", "Core 21", "Core 22", "Core 23", + "Core 24", "Core 25", "Core 26", "Core 27", +}; + +static s32 ten_dot_six_to_millidegree(s32 val) +{ + return ((val ^ 0x8000) - 0x8000) * 1000 / 64; +} + +static int get_temp_targets(struct peci_cputemp *priv) +{ + s32 tthrottle_offset; + s32 tcontrol_margin; + u8 pkg_cfg[4]; + int ret; + + /* + * Just use only the tcontrol marker to determine if target values need + * update. + */ + if (!peci_sensor_need_update(&priv->temp.tcontrol)) + return 0; + + ret = peci_client_read_package_config(priv->mgr, + PECI_MBX_INDEX_TEMP_TARGET, 0, + pkg_cfg); + if (ret) + return ret; + + priv->temp.tjmax.value = pkg_cfg[2] * 1000; + + tcontrol_margin = pkg_cfg[1]; + tcontrol_margin = ((tcontrol_margin ^ 0x80) - 0x80) * 1000; + priv->temp.tcontrol.value = priv->temp.tjmax.value - tcontrol_margin; + + tthrottle_offset = (pkg_cfg[3] & 0x2f) * 1000; + priv->temp.tthrottle.value = priv->temp.tjmax.value - tthrottle_offset; + + peci_sensor_mark_updated(&priv->temp.tcontrol); + + return 0; +} + +static int get_die_temp(struct peci_cputemp *priv) +{ + struct peci_get_temp_msg msg; + int ret; + + if (!peci_sensor_need_update(&priv->temp.die)) + return 0; + + msg.addr = priv->mgr->client->addr; + + ret = peci_command(priv->mgr->client->adapter, PECI_CMD_GET_TEMP, &msg); + if (ret) + return ret; + + /* Note that the tjmax should be available before calling it */ + priv->temp.die.value = priv->temp.tjmax.value + + (msg.temp_raw * 1000 / 64); + + peci_sensor_mark_updated(&priv->temp.die); + + return 0; +} + +static int get_dts(struct peci_cputemp *priv) +{ + s32 dts_margin; + u8 pkg_cfg[4]; + int ret; + + if (!peci_sensor_need_update(&priv->temp.dts)) + return 0; + + ret = peci_client_read_package_config(priv->mgr, + PECI_MBX_INDEX_DTS_MARGIN, 0, + pkg_cfg); + + if (ret) + return ret; + + dts_margin = (pkg_cfg[1] << 8) | pkg_cfg[0]; + + /** + * Processors return a value of DTS reading in 10.6 format + * (10 bits signed decimal, 6 bits fractional). + * Error codes: + * 0x8000: General sensor error + * 0x8001: Reserved + * 0x8002: Underflow on reading value + * 0x8003-0x81ff: Reserved + */ + if (dts_margin >= 0x8000 && dts_margin <= 0x81ff) + return -EIO; + + dts_margin = ten_dot_six_to_millidegree(dts_margin); + + /* Note that the tcontrol should be available before calling it */ + priv->temp.dts.value = priv->temp.tcontrol.value - dts_margin; + + peci_sensor_mark_updated(&priv->temp.dts); + + return 0; +} + +static int get_core_temp(struct peci_cputemp *priv, int core_index) +{ + s32 core_dts_margin; + u8 pkg_cfg[4]; + int ret; + + if (!peci_sensor_need_update(&priv->temp.core[core_index])) + return 0; + + ret = peci_client_read_package_config(priv->mgr, + PECI_MBX_INDEX_PER_CORE_DTS_TEMP, + core_index, pkg_cfg); + if (ret) + return ret; + + core_dts_margin = le16_to_cpup((__le16 *)pkg_cfg); + + /* + * Processors return a value of the core DTS reading in 10.6 format + * (10 bits signed decimal, 6 bits fractional). + * Error codes: + * 0x8000: General sensor error + * 0x8001: Reserved + * 0x8002: Underflow on reading value + * 0x8003-0x81ff: Reserved + */ + if (core_dts_margin >= 0x8000 && core_dts_margin <= 0x81ff) + return -EIO; + + core_dts_margin = ten_dot_six_to_millidegree(core_dts_margin); + + /* Note that the tjmax should be available before calling it */ + priv->temp.core[core_index].value = priv->temp.tjmax.value + + core_dts_margin; + + peci_sensor_mark_updated(&priv->temp.core[core_index]); + + return 0; +} + +static int cputemp_read_string(struct device *dev, + enum hwmon_sensor_types type, + u32 attr, int channel, const char **str) +{ + if (attr != hwmon_temp_label) + return -EOPNOTSUPP; + + *str = cputemp_label[channel]; + + return 0; +} + +static int cputemp_read(struct device *dev, + enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct peci_cputemp *priv = dev_get_drvdata(dev); + int ret, core_index; + + if (channel >= CPUTEMP_CHANNEL_NUMS || + !(priv->temp_config[channel] & BIT(attr))) + return -EOPNOTSUPP; + + ret = get_temp_targets(priv); + if (ret) + return ret; + + switch (attr) { + case hwmon_temp_input: + switch (channel) { + case channel_die: + ret = get_die_temp(priv); + if (ret) + break; + + *val = priv->temp.die.value; + break; + case channel_dts: + ret = get_dts(priv); + if (ret) + break; + + *val = priv->temp.dts.value; + break; + case channel_tcontrol: + *val = priv->temp.tcontrol.value; + break; + case channel_tthrottle: + *val = priv->temp.tthrottle.value; + break; + case channel_tjmax: + *val = priv->temp.tjmax.value; + break; + default: + core_index = channel - DEFAULT_CHANNEL_NUMS; + ret = get_core_temp(priv, core_index); + if (ret) + break; + + *val = priv->temp.core[core_index].value; + break; + } + break; + case hwmon_temp_max: + *val = priv->temp.tcontrol.value; + break; + case hwmon_temp_crit: + *val = priv->temp.tjmax.value; + break; + case hwmon_temp_crit_hyst: + *val = priv->temp.tjmax.value - priv->temp.tcontrol.value; + break; + default: + ret = -EOPNOTSUPP; + break; + } + + return ret; +} + +static umode_t cputemp_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + const struct peci_cputemp *priv = data; + + if (channel < ARRAY_SIZE(priv->temp_config) && + (priv->temp_config[channel] & BIT(attr)) && + (channel < DEFAULT_CHANNEL_NUMS || + (channel >= DEFAULT_CHANNEL_NUMS && + (priv->core_mask & BIT(channel - DEFAULT_CHANNEL_NUMS))))) + return 0444; + + return 0; +} + +static const struct hwmon_ops cputemp_ops = { + .is_visible = cputemp_is_visible, + .read_string = cputemp_read_string, + .read = cputemp_read, +}; + +static int check_resolved_cores(struct peci_cputemp *priv) +{ + struct peci_rd_pci_cfg_local_msg msg; + int ret; + + /* Get the RESOLVED_CORES register value */ + msg.addr = priv->mgr->client->addr; + msg.device = 30; + msg.function = 3; + msg.rx_len = 4; + msg.bus = 1; + msg.reg = 0xb4; + + ret = peci_command(priv->mgr->client->adapter, + PECI_CMD_RD_PCI_CFG_LOCAL, &msg); + if (msg.cc != PECI_DEV_CC_SUCCESS) + ret = -EAGAIN; + if (ret) + return ret; + + priv->core_mask = le32_to_cpup((__le32 *)msg.pci_config); + if (!priv->core_mask) + return -EAGAIN; + + dev_dbg(priv->dev, "Scanned resolved cores: 0x%llx\n", priv->core_mask); + + return 0; +} + +static int create_core_temp_info(struct peci_cputemp *priv) +{ + int ret, i; + + ret = check_resolved_cores(priv); + if (ret) + return ret; + + for (i = 0; i < priv->gen_info->core_max; i++) + if (priv->core_mask & BIT(i)) + while (priv->config_idx <= i + DEFAULT_CHANNEL_NUMS) + priv->temp_config[priv->config_idx++] = + config_table[channel_core]; + + return 0; +} + +static int peci_cputemp_probe(struct platform_device *pdev) +{ + struct peci_client_manager *mgr = dev_get_drvdata(pdev->dev.parent); + struct device *dev = &pdev->dev; + struct peci_cputemp *priv; + struct device *hwmon_dev; + int ret; + + if ((mgr->client->adapter->cmd_mask & + (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) != + (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) + return -ENODEV; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + dev_set_drvdata(dev, priv); + priv->mgr = mgr; + priv->dev = dev; + priv->gen_info = mgr->gen_info; + + snprintf(priv->name, PECI_NAME_SIZE, "peci_cputemp.cpu%d", + mgr->client->addr - PECI_BASE_ADDR); + + priv->temp_config[priv->config_idx++] = config_table[channel_die]; + priv->temp_config[priv->config_idx++] = config_table[channel_dts]; + priv->temp_config[priv->config_idx++] = config_table[channel_tcontrol]; + priv->temp_config[priv->config_idx++] = config_table[channel_tthrottle]; + priv->temp_config[priv->config_idx++] = config_table[channel_tjmax]; + + ret = create_core_temp_info(priv); + if (ret) + dev_dbg(dev, "Skipped creating core temp info\n"); + + priv->chip.ops = &cputemp_ops; + priv->chip.info = priv->info; + + priv->info[0] = &priv->temp_info; + + priv->temp_info.type = hwmon_temp; + priv->temp_info.config = priv->temp_config; + + hwmon_dev = devm_hwmon_device_register_with_info(priv->dev, + priv->name, + priv, + &priv->chip, + NULL); + + if (IS_ERR(hwmon_dev)) + return PTR_ERR(hwmon_dev); + + dev_dbg(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev), priv->name); + + return 0; +} + +static const struct platform_device_id peci_cputemp_ids[] = { + { .name = "peci-cputemp", .driver_data = 0 }, + { } +}; +MODULE_DEVICE_TABLE(platform, peci_cputemp_ids); + +static struct platform_driver peci_cputemp_driver = { + .probe = peci_cputemp_probe, + .id_table = peci_cputemp_ids, + .driver = { .name = KBUILD_MODNAME, }, +}; +module_platform_driver(peci_cputemp_driver); + +MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>"); +MODULE_DESCRIPTION("PECI cputemp driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/hwmon/peci-hwmon.h b/drivers/hwmon/peci-hwmon.h new file mode 100644 index 000000000000..e0e3c901c6e4 --- /dev/null +++ b/drivers/hwmon/peci-hwmon.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2018-2019 Intel Corporation */ + +#ifndef __PECI_HWMON_H +#define __PECI_HWMON_H + +#include <linux/peci.h> + +#define TEMP_TYPE_PECI 6 /* Sensor type 6: Intel PECI */ +#define UPDATE_INTERVAL HZ + +/** + * struct peci_sensor_data - PECI sensor information + * @valid: flag to indicate the sensor value is valid + * @value: sensor value in millidegree Celsius + * @last_updated: time of the last update in jiffies + */ +struct peci_sensor_data { + uint valid; + s32 value; + ulong last_updated; +}; + +/** + * peci_sensor_need_update - check whether sensor update is needed or not + * @sensor: pointer to sensor data struct + * + * Return: true if update is needed, false if not. + */ +static inline bool peci_sensor_need_update(struct peci_sensor_data *sensor) +{ + return !sensor->valid || + time_after(jiffies, sensor->last_updated + UPDATE_INTERVAL); +} + +/** + * peci_sensor_mark_updated - mark the sensor is updated + * @sensor: pointer to sensor data struct + */ +static inline void peci_sensor_mark_updated(struct peci_sensor_data *sensor) +{ + sensor->valid = 1; + sensor->last_updated = jiffies; +} + +#endif /* __PECI_HWMON_H */