new file mode 100644
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/st,stm32-mdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 MDMA Controller bindings
+
+description: |
+ The STM32 MDMA is a general-purpose direct memory access controller capable of
+ supporting 64 independent DMA channels with 256 HW requests.
+ DMA clients connected to the STM32 MDMA controller must use the format
+ described in the dma.txt file, using a five-cell specifier for each channel:
+ a phandle to the MDMA controller plus the following five integer cells:
+ 1. The request line number
+ 2. The priority level
+ 0x0: Low
+ 0x1: Medium
+ 0x2: High
+ 0x3: Very high
+ 3. A 32bit mask specifying the DMA channel configuration
+ -bit 0-1: Source increment mode
+ 0x0: Source address pointer is fixed
+ 0x2: Source address pointer is incremented after each data transfer
+ 0x3: Source address pointer is decremented after each data transfer
+ -bit 2-3: Destination increment mode
+ 0x0: Destination address pointer is fixed
+ 0x2: Destination address pointer is incremented after each data transfer
+ 0x3: Destination address pointer is decremented after each data transfer
+ -bit 8-9: Source increment offset size
+ 0x0: byte (8bit)
+ 0x1: half-word (16bit)
+ 0x2: word (32bit)
+ 0x3: double-word (64bit)
+ -bit 10-11: Destination increment offset size
+ 0x0: byte (8bit)
+ 0x1: half-word (16bit)
+ 0x2: word (32bit)
+ 0x3: double-word (64bit)
+ -bit 25-18: The number of bytes to be transferred in a single transfer
+ (min = 1 byte, max = 128 bytes)
+ -bit 29:28: Trigger Mode
+ 0x00: Each MDMA request triggers a buffer transfer (max 128 bytes)
+ 0x1: Each MDMA request triggers a block transfer (max 64K bytes)
+ 0x2: Each MDMA request triggers a repeated block transfer
+ 0x3: Each MDMA request triggers a linked list transfer
+ 4. A 32bit value specifying the register to be used to acknowledge the request
+ if no HW ack signal is used by the MDMA client
+ 5. A 32bit mask specifying the value to be written to acknowledge the request
+ if no HW ack signal is used by the MDMA client
+
+maintainers:
+ - Amelie Delaunay <amelie.delaunay@st.com>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ "#dma-cells":
+ const: 5
+
+ compatible:
+ const: st,stm32h7-mdma
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ st,ahb-addr-masks:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: Array of u32 mask to list memory devices addressed via AHB bus.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ dma-controller@52000000 {
+ compatible = "st,stm32h7-mdma";
+ reg = <0x52000000 0x1000>;
+ interrupts = <122>;
+ clocks = <&timer_clk>;
+ resets = <&rcc 992>;
+ #dma-cells = <5>;
+ dma-channels = <16>;
+ dma-requests = <32>;
+ st,ahb-addr-masks = <0x20000000>, <0x00000000>;
+ };
+
+...
+
deleted file mode 100644
@@ -1,94 +0,0 @@
-* STMicroelectronics STM32 MDMA controller
-
-The STM32 MDMA is a general-purpose direct memory access controller capable of
-supporting 64 independent DMA channels with 256 HW requests.
-
-Required properties:
-- compatible: Should be "st,stm32h7-mdma"
-- reg: Should contain MDMA registers location and length. This should include
- all of the per-channel registers.
-- interrupts: Should contain the MDMA interrupt.
-- clocks: Should contain the input clock of the DMA instance.
-- resets: Reference to a reset controller asserting the DMA controller.
-- #dma-cells : Must be <5>. See DMA client paragraph for more details.
-
-Optional properties:
-- dma-channels: Number of DMA channels supported by the controller.
-- dma-requests: Number of DMA request signals supported by the controller.
-- st,ahb-addr-masks: Array of u32 mask to list memory devices addressed via
- AHB bus.
-
-Example:
-
- mdma1: dma@52000000 {
- compatible = "st,stm32h7-mdma";
- reg = <0x52000000 0x1000>;
- interrupts = <122>;
- clocks = <&timer_clk>;
- resets = <&rcc 992>;
- #dma-cells = <5>;
- dma-channels = <16>;
- dma-requests = <32>;
- st,ahb-addr-masks = <0x20000000>, <0x00000000>;
- };
-
-* DMA client
-
-DMA clients connected to the STM32 MDMA controller must use the format
-described in the dma.txt file, using a five-cell specifier for each channel:
-a phandle to the MDMA controller plus the following five integer cells:
-
-1. The request line number
-2. The priority level
- 0x00: Low
- 0x01: Medium
- 0x10: High
- 0x11: Very high
-3. A 32bit mask specifying the DMA channel configuration
- -bit 0-1: Source increment mode
- 0x00: Source address pointer is fixed
- 0x10: Source address pointer is incremented after each data transfer
- 0x11: Source address pointer is decremented after each data transfer
- -bit 2-3: Destination increment mode
- 0x00: Destination address pointer is fixed
- 0x10: Destination address pointer is incremented after each data
- transfer
- 0x11: Destination address pointer is decremented after each data
- transfer
- -bit 8-9: Source increment offset size
- 0x00: byte (8bit)
- 0x01: half-word (16bit)
- 0x10: word (32bit)
- 0x11: double-word (64bit)
- -bit 10-11: Destination increment offset size
- 0x00: byte (8bit)
- 0x01: half-word (16bit)
- 0x10: word (32bit)
- 0x11: double-word (64bit)
--bit 25-18: The number of bytes to be transferred in a single transfer
- (min = 1 byte, max = 128 bytes)
--bit 29:28: Trigger Mode
- 0x00: Each MDMA request triggers a buffer transfer (max 128 bytes)
- 0x01: Each MDMA request triggers a block transfer (max 64K bytes)
- 0x10: Each MDMA request triggers a repeated block transfer
- 0x11: Each MDMA request triggers a linked list transfer
-4. A 32bit value specifying the register to be used to acknowledge the request
- if no HW ack signal is used by the MDMA client
-5. A 32bit mask specifying the value to be written to acknowledge the request
- if no HW ack signal is used by the MDMA client
-
-Example:
-
- i2c4: i2c@5c002000 {
- compatible = "st,stm32f7-i2c";
- reg = <0x5c002000 0x400>;
- interrupts = <95>,
- <96>;
- clocks = <&timer_clk>;
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&mdma1 36 0x0 0x40008 0x0 0x0>,
- <&mdma1 37 0x0 0x40002 0x0 0x0>;
- dma-names = "rx", "tx";
- status = "disabled";
- };
Convert the STM32 MDMA binding to DT schema format using json-schema Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> --- .../devicetree/bindings/dma/st,stm32-mdma.yaml | 105 +++++++++++++++++++++ .../devicetree/bindings/dma/stm32-mdma.txt | 94 ------------------ 2 files changed, 105 insertions(+), 94 deletions(-) create mode 100644 Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml delete mode 100644 Documentation/devicetree/bindings/dma/stm32-mdma.txt