diff mbox series

[V3,2/3] arm64: dts: imx8mm: Add Crypto CAAM support

Message ID 20191218130616.13860-2-aford173@gmail.com (mailing list archive)
State New, archived
Headers show
Series [V3,1/3] crypto: caam: Add support for i.MX8M Mini | expand

Commit Message

Adam Ford Dec. 18, 2019, 1:06 p.m. UTC 
The i.MX8M Mini supports the same crypto engine as what is in
the i.MX8MQ, but it is not currently present in the device tree.

This patch places it into the device tree.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
---
V3:  Fix typo in commit message.  no code changes
V2:  Don't disable it by default

Comments

Shawn Guo Dec. 23, 2019, 8:48 a.m. UTC | #1 
On Wed, Dec 18, 2019 at 07:06:15AM -0600, Adam Ford wrote:
> The i.MX8M Mini supports the same crypto engine as what is in
> the i.MX8MQ, but it is not currently present in the device tree.
> 
> This patch places it into the device tree.
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>
> Reviewed-by: Horia Geantă <horia.geanta@nxp.com>

Applied, thanks.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 6edbdfe2d0d7..cbe80a3f048c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -641,6 +641,36 @@ 
 				status = "disabled";
 			};
 
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_AHB>,
+					 <&clk IMX8MM_CLK_IPG_ROOT>;
+				clock-names = "aclk", "ipg";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
 			i2c1: i2c@30a20000 {
 				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
 				#address-cells = <1>;